summaryrefslogtreecommitdiff
path: root/drivers/net/can/janz-ican3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/janz-ican3.c')
-rw-r--r--drivers/net/can/janz-ican3.c125
1 files changed, 88 insertions, 37 deletions
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 4dd183a3643a..c1e85368a198 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -40,6 +40,7 @@
#define MSYNC_PEER 0x00 /* ICAN only */
#define MSYNC_LOCL 0x01 /* host only */
#define TARGET_RUNNING 0x02
+#define FIRMWARE_STAMP 0x60 /* big endian firmware stamp */
#define MSYNC_RB0 0x01
#define MSYNC_RB1 0x02
@@ -83,6 +84,7 @@
#define MSG_COFFREQ 0x42
#define MSG_CONREQ 0x43
#define MSG_CCONFREQ 0x47
+#define MSG_LMTS 0xb4
/*
* Janz ICAN3 CAN Inquiry Message Types
@@ -165,6 +167,12 @@
/* SJA1000 Clock Input */
#define ICAN3_CAN_CLOCK 8000000
+/* Janz ICAN3 firmware types */
+enum ican3_fwtype {
+ ICAN3_FWTYPE_ICANOS,
+ ICAN3_FWTYPE_CAL_CANOPEN,
+};
+
/* Driver Name */
#define DRV_NAME "janz-ican3"
@@ -215,6 +223,10 @@ struct ican3_dev {
struct completion buserror_comp;
struct can_berr_counter bec;
+ /* firmware type */
+ enum ican3_fwtype fwtype;
+ char fwinfo[32];
+
/* old and new style host interface */
unsigned int iftype;
@@ -750,13 +762,61 @@ static int ican3_set_id_filter(struct ican3_dev *mod, bool accept)
*/
static int ican3_set_bus_state(struct ican3_dev *mod, bool on)
{
+ struct can_bittiming *bt = &mod->can.bittiming;
struct ican3_msg msg;
+ u8 btr0, btr1;
+ int res;
- memset(&msg, 0, sizeof(msg));
- msg.spec = on ? MSG_CONREQ : MSG_COFFREQ;
- msg.len = cpu_to_le16(0);
+ /* This algorithm was stolen from drivers/net/can/sja1000/sja1000.c */
+ /* The bittiming register command for the ICAN3 just sets the bit timing */
+ /* registers on the SJA1000 chip directly */
+ btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+ btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+ (((bt->phase_seg2 - 1) & 0x7) << 4);
+ if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ btr1 |= 0x80;
- return ican3_send_msg(mod, &msg);
+ if (mod->fwtype == ICAN3_FWTYPE_ICANOS) {
+ if (on) {
+ /* set bittiming */
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_CBTRREQ;
+ msg.len = cpu_to_le16(4);
+ msg.data[0] = 0x00;
+ msg.data[1] = 0x00;
+ msg.data[2] = btr0;
+ msg.data[3] = btr1;
+
+ res = ican3_send_msg(mod, &msg);
+ if (res)
+ return res;
+ }
+
+ /* can-on/off request */
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = on ? MSG_CONREQ : MSG_COFFREQ;
+ msg.len = cpu_to_le16(0);
+
+ return ican3_send_msg(mod, &msg);
+
+ } else if (mod->fwtype == ICAN3_FWTYPE_CAL_CANOPEN) {
+ memset(&msg, 0, sizeof(msg));
+ msg.spec = MSG_LMTS;
+ if (on) {
+ msg.len = cpu_to_le16(4);
+ msg.data[0] = 0;
+ msg.data[1] = 0;
+ msg.data[2] = btr0;
+ msg.data[3] = btr1;
+ } else {
+ msg.len = cpu_to_le16(2);
+ msg.data[0] = 1;
+ msg.data[1] = 0;
+ }
+
+ return ican3_send_msg(mod, &msg);
+ }
+ return -ENOTSUPP;
}
static int ican3_set_termination(struct ican3_dev *mod, bool on)
@@ -1402,7 +1462,7 @@ static int ican3_reset_module(struct ican3_dev *mod)
return 0;
msleep(10);
- } while (time_before(jiffies, start + HZ / 4));
+ } while (time_before(jiffies, start + HZ / 2));
netdev_err(mod->ndev, "failed to reset CAN module\n");
return -ETIMEDOUT;
@@ -1427,6 +1487,17 @@ static int ican3_startup_module(struct ican3_dev *mod)
return ret;
}
+ /* detect firmware */
+ memcpy_fromio(mod->fwinfo, mod->dpm + FIRMWARE_STAMP, sizeof(mod->fwinfo) - 1);
+ if (strncmp(mod->fwinfo, "JANZ-ICAN3", 10)) {
+ netdev_err(mod->ndev, "ICAN3 not detected (found %s)\n", mod->fwinfo);
+ return -ENODEV;
+ }
+ if (strstr(mod->fwinfo, "CAL/CANopen"))
+ mod->fwtype = ICAN3_FWTYPE_CAL_CANOPEN;
+ else
+ mod->fwtype = ICAN3_FWTYPE_ICANOS;
+
/* re-enable interrupts so we can send messages */
iowrite8(1 << mod->num, &mod->ctrl->int_enable);
@@ -1615,36 +1686,6 @@ static const struct can_bittiming_const ican3_bittiming_const = {
.brp_inc = 1,
};
-/*
- * This routine was stolen from drivers/net/can/sja1000/sja1000.c
- *
- * The bittiming register command for the ICAN3 just sets the bit timing
- * registers on the SJA1000 chip directly
- */
-static int ican3_set_bittiming(struct net_device *ndev)
-{
- struct ican3_dev *mod = netdev_priv(ndev);
- struct can_bittiming *bt = &mod->can.bittiming;
- struct ican3_msg msg;
- u8 btr0, btr1;
-
- btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
- btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
- (((bt->phase_seg2 - 1) & 0x7) << 4);
- if (mod->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
- btr1 |= 0x80;
-
- memset(&msg, 0, sizeof(msg));
- msg.spec = MSG_CBTRREQ;
- msg.len = cpu_to_le16(4);
- msg.data[0] = 0x00;
- msg.data[1] = 0x00;
- msg.data[2] = btr0;
- msg.data[3] = btr1;
-
- return ican3_send_msg(mod, &msg);
-}
-
static int ican3_set_mode(struct net_device *ndev, enum can_mode mode)
{
struct ican3_dev *mod = netdev_priv(ndev);
@@ -1730,11 +1771,22 @@ static ssize_t ican3_sysfs_set_term(struct device *dev,
return count;
}
+static ssize_t ican3_sysfs_show_fwinfo(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ican3_dev *mod = netdev_priv(to_net_dev(dev));
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", mod->fwinfo);
+}
+
static DEVICE_ATTR(termination, S_IWUSR | S_IRUGO, ican3_sysfs_show_term,
ican3_sysfs_set_term);
+static DEVICE_ATTR(fwinfo, S_IRUSR | S_IRUGO, ican3_sysfs_show_fwinfo, NULL);
static struct attribute *ican3_sysfs_attrs[] = {
&dev_attr_termination.attr,
+ &dev_attr_fwinfo.attr,
NULL,
};
@@ -1794,7 +1846,6 @@ static int ican3_probe(struct platform_device *pdev)
mod->can.clock.freq = ICAN3_CAN_CLOCK;
mod->can.bittiming_const = &ican3_bittiming_const;
- mod->can.do_set_bittiming = ican3_set_bittiming;
mod->can.do_set_mode = ican3_set_mode;
mod->can.do_get_berr_counter = ican3_get_berr_counter;
mod->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES
@@ -1866,7 +1917,7 @@ static int ican3_probe(struct platform_device *pdev)
goto out_free_irq;
}
- dev_info(dev, "module %d: registered CAN device\n", pdata->modno);
+ netdev_info(mod->ndev, "module %d: registered CAN device\n", pdata->modno);
return 0;
out_free_irq: