diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 116 |
1 files changed, 33 insertions, 83 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index bf13d47c26cf..83b7f2d5c1ea 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -21,25 +21,25 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0); + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset), + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), bits, set ? bits : 0); } static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) { - regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0); + regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0); } static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, u32 bits, bool set) { - regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset), + regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset), bits, set ? bits : 0); } @@ -52,7 +52,7 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, + return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, frame_size); } @@ -60,7 +60,7 @@ static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL, + return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL, val, !(val & VLAN_START), 10, 1000); } @@ -147,7 +147,7 @@ static int ksz9477_wait_alu_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4, + return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4, val, !(val & ALU_START), 10, 1000); } @@ -155,7 +155,7 @@ static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) { unsigned int val; - return regmap_read_poll_timeout(dev->regmap[2], + return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_STAT_CTRL__4, val, !(val & ALU_STAT_START), 10, 1000); @@ -170,7 +170,7 @@ int ksz9477_reset_switch(struct ksz_device *dev) ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); /* turn off SPI DO Edge select */ - regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0, SPI_AUTO_EDGE_DETECTION, 0); /* default configuration */ @@ -213,7 +213,7 @@ void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) data |= (addr << MIB_COUNTER_INDEX_S); ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); - ret = regmap_read_poll_timeout(dev->regmap[2], + ret = regmap_read_poll_timeout(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4), val, !(val & MIB_COUNTER_READ), 10, 1000); /* failed to read MIB. get out of loop */ @@ -329,11 +329,27 @@ int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) { + u32 mask, val32; + /* No real PHY after this. */ if (!dev->info->internal_phy[addr]) return 0; - return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + if (reg < 0x10) + return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + + /* Errata: When using SPI, I2C, or in-band register access, + * writes to certain PHY registers should be performed as + * 32-bit writes instead of 16-bit writes. + */ + val32 = val; + mask = 0xffff; + if ((reg & 1) == 0) { + val32 <<= 16; + mask <<= 16; + } + reg &= ~1; + return ksz_prmw32(dev, addr, 0x100 + (reg << 1), mask, val32); } void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) @@ -346,7 +362,7 @@ void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) const u16 *regs = dev->info->regs; u8 data; - regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2, + regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2, SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); @@ -889,62 +905,6 @@ static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) return interface; } -static void ksz9477_port_mmd_write(struct ksz_device *dev, int port, - u8 dev_addr, u16 reg_addr, u16 val) -{ - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, - MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr)); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP, - MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr)); - ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val); -} - -static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port) -{ - /* Apply PHY settings to address errata listed in - * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565 - * Silicon Errata and Data Sheet Clarification documents: - * - * Register settings are needed to improve PHY receive performance - */ - ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b); - ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032); - ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c); - ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060); - ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001); - - /* Transmit waveform amplitude can be improved - * (1000BASE-T, 100BASE-TX, 10BASE-Te) - */ - ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0); - - /* Energy Efficient Ethernet (EEE) feature select must - * be manually disabled (except on KSZ8565 which is 100Mbit) - */ - if (dev->info->gbit_capable[port]) - ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000); - - /* Register settings are required to meet data sheet - * supply current specifications - */ - ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff); - ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee); -} - void ksz9477_get_caps(struct ksz_device *dev, int port, struct phylink_config *config) { @@ -1029,20 +989,10 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* enable 802.1p priority */ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); - if (dev->info->internal_phy[port]) { - /* do not force flow control */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, - PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, - false); - - if (dev->info->phy_errata_9477) - ksz9477_phy_errata_setup(dev, port); - } else { - /* force flow control */ - ksz_port_cfg(dev, port, REG_PORT_CTRL_0, - PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, - true); - } + /* force flow control for non-PHY ports only */ + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + !dev->info->internal_phy[port]); if (cpu_port) member = dsa_user_ports(ds); @@ -1165,7 +1115,7 @@ int ksz9477_setup(struct dsa_switch *ds) ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); /* Now we can configure default MTU value */ - ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK, + ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); if (ret) return ret; |