diff options
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx/chip.c')
-rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 27 |
1 files changed, 20 insertions, 7 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 0a5d6c7bb128..7108f745fbf0 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3354,9 +3354,14 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) * If this is the upstream port for this switch, enable * forwarding of unknown unicasts and multicasts. */ - reg = MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP | - MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP | + reg = MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP | MV88E6XXX_PORT_CTL0_STATE_FORWARDING; + /* Forward any IPv4 IGMP or IPv6 MLD frames received + * by a USER port to the CPU port to allow snooping. + */ + if (dsa_is_user_port(ds, port)) + reg |= MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP; + err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL0, reg); if (err) return err; @@ -3549,7 +3554,7 @@ static int mv88e6xxx_get_max_mtu(struct dsa_switch *ds, int port) return 10240 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; else if (chip->info->ops->set_max_frame_size) return 1632 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; - return 1522 - VLAN_ETH_HLEN - EDSA_HLEN - ETH_FCS_LEN; + return ETH_DATA_LEN; } static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) @@ -3557,6 +3562,17 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) struct mv88e6xxx_chip *chip = ds->priv; int ret = 0; + /* For families where we don't know how to alter the MTU, + * just accept any value up to ETH_DATA_LEN + */ + if (!chip->info->ops->port_set_jumbo_size && + !chip->info->ops->set_max_frame_size) { + if (new_mtu > ETH_DATA_LEN) + return -EINVAL; + + return 0; + } + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) new_mtu += EDSA_HLEN; @@ -3565,9 +3581,6 @@ static int mv88e6xxx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ret = chip->info->ops->port_set_jumbo_size(chip, port, new_mtu); else if (chip->info->ops->set_max_frame_size) ret = chip->info->ops->set_max_frame_size(chip, new_mtu); - else - if (new_mtu > 1522) - ret = -EINVAL; mv88e6xxx_reg_unlock(chip); return ret; @@ -5588,7 +5601,7 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = { * .port_set_upstream_port method. */ .set_egress_port = mv88e6393x_set_egress_port, - .watchdog_ops = &mv88e6390_watchdog_ops, + .watchdog_ops = &mv88e6393x_watchdog_ops, .mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, .reset = mv88e6352_g1_reset, |