diff options
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r-- | drivers/net/dsa/mt7530.c | 35 |
1 files changed, 20 insertions, 15 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 3a15015bc409..a508402c4ecb 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -393,6 +393,24 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); } +/* Set up switch core clock for MT7530 */ +static void mt7530_pll_setup(struct mt7530_priv *priv) +{ + /* Disable PLL */ + core_write(priv, CORE_GSWPLL_GRP1, 0); + + /* Set core clock into 500Mhz */ + core_write(priv, CORE_GSWPLL_GRP2, + RG_GSWPLL_POSDIV_500M(1) | + RG_GSWPLL_FBKDIV_500M(25)); + + /* Enable PLL */ + core_write(priv, CORE_GSWPLL_GRP1, + RG_GSWPLL_EN_PRE | + RG_GSWPLL_POSDIV_200M(2) | + RG_GSWPLL_FBKDIV_200M(32)); +} + /* Setup TX circuit including relevant PAD and driving */ static int mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) @@ -453,21 +471,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN | REG_TRGMIICK_EN); - /* Setup core clock for MT7530 */ - /* Disable PLL */ - core_write(priv, CORE_GSWPLL_GRP1, 0); - - /* Set core clock into 500Mhz */ - core_write(priv, CORE_GSWPLL_GRP2, - RG_GSWPLL_POSDIV_500M(1) | - RG_GSWPLL_FBKDIV_500M(25)); - - /* Enable PLL */ - core_write(priv, CORE_GSWPLL_GRP1, - RG_GSWPLL_EN_PRE | - RG_GSWPLL_POSDIV_200M(2) | - RG_GSWPLL_FBKDIV_200M(32)); - /* Setup the MT7530 TRGMII Tx Clock */ core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0)); @@ -2196,6 +2199,8 @@ mt7530_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); + mt7530_pll_setup(priv); + /* Enable Port 6 only; P5 as GMAC5 which currently is not supported */ val = mt7530_read(priv, MT7530_MHWTRAP); val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; |