summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/amd')
-rw-r--r--drivers/net/ethernet/amd/depca.c210
1 files changed, 4 insertions, 206 deletions
diff --git a/drivers/net/ethernet/amd/depca.c b/drivers/net/ethernet/amd/depca.c
index 7f7b99a5f024..c771de71612a 100644
--- a/drivers/net/ethernet/amd/depca.c
+++ b/drivers/net/ethernet/amd/depca.c
@@ -155,23 +155,10 @@
2 depca's in a PC).
************************************************************************
- Support for MCA EtherWORKS cards added 11-3-98.
+ Support for MCA EtherWORKS cards added 11-3-98. (MCA since deleted)
Verified to work with up to 2 DE212 cards in a system (although not
fully stress-tested).
- Currently known bugs/limitations:
-
- Note: with the MCA stuff as a module, it trusts the MCA configuration,
- not the command line for IRQ and memory address. You can
- specify them if you want, but it will throw your values out.
- You still have to pass the IO address it was configured as
- though.
-
- ************************************************************************
- TO DO:
- ------
-
-
Revision History
----------------
@@ -261,10 +248,6 @@
#include <asm/io.h>
#include <asm/dma.h>
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
#ifdef CONFIG_EISA
#include <linux/eisa.h>
#endif
@@ -360,44 +343,6 @@ static struct eisa_driver depca_eisa_driver = {
};
#endif
-#ifdef CONFIG_MCA
-/*
-** Adapter ID for the MCA EtherWORKS DE210/212 adapter
-*/
-#define DE210_ID 0x628d
-#define DE212_ID 0x6def
-
-static short depca_mca_adapter_ids[] = {
- DE210_ID,
- DE212_ID,
- 0x0000
-};
-
-static char *depca_mca_adapter_name[] = {
- "DEC EtherWORKS MC Adapter (DE210)",
- "DEC EtherWORKS MC Adapter (DE212)",
- NULL
-};
-
-static enum depca_type depca_mca_adapter_type[] = {
- de210,
- de212,
- 0
-};
-
-static int depca_mca_probe (struct device *);
-
-static struct mca_driver depca_mca_driver = {
- .id_table = depca_mca_adapter_ids,
- .driver = {
- .name = depca_string,
- .bus = &mca_bus_type,
- .probe = depca_mca_probe,
- .remove = __devexit_p(depca_device_remove),
- },
-};
-#endif
-
static int depca_isa_probe (struct platform_device *);
static int __devexit depca_isa_remove(struct platform_device *pdev)
@@ -464,8 +409,7 @@ struct depca_private {
char adapter_name[DEPCA_STRLEN]; /* /proc/ioports string */
enum depca_type adapter; /* Adapter type */
enum {
- DEPCA_BUS_MCA = 1,
- DEPCA_BUS_ISA,
+ DEPCA_BUS_ISA = 1,
DEPCA_BUS_EISA,
} depca_bus; /* type of bus */
struct depca_init init_block; /* Shadow Initialization block */
@@ -624,12 +568,6 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
dev_name(device), depca_signature[lp->adapter], ioaddr);
switch (lp->depca_bus) {
-#ifdef CONFIG_MCA
- case DEPCA_BUS_MCA:
- printk(" (MCA slot %d)", to_mca_device(device)->slot + 1);
- break;
-#endif
-
#ifdef CONFIG_EISA
case DEPCA_BUS_EISA:
printk(" (EISA slot %d)", to_eisa_device(device)->slot);
@@ -661,10 +599,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device)
if (nicsr & BUF) {
nicsr &= ~BS; /* DEPCA RAM in top 32k */
netRAM -= 32;
-
- /* Only EISA/ISA needs start address to be re-computed */
- if (lp->depca_bus != DEPCA_BUS_MCA)
- mem_start += 0x8000;
+ mem_start += 0x8000;
}
if ((mem_len = (NUM_RX_DESC * (sizeof(struct depca_rx_desc) + RX_BUFF_SZ) + NUM_TX_DESC * (sizeof(struct depca_tx_desc) + TX_BUFF_SZ) + sizeof(struct depca_init)))
@@ -1325,130 +1260,6 @@ static int __init depca_common_init (u_long ioaddr, struct net_device **devp)
return status;
}
-#ifdef CONFIG_MCA
-/*
-** Microchannel bus I/O device probe
-*/
-static int __init depca_mca_probe(struct device *device)
-{
- unsigned char pos[2];
- unsigned char where;
- unsigned long iobase, mem_start;
- int irq, err;
- struct mca_device *mdev = to_mca_device (device);
- struct net_device *dev;
- struct depca_private *lp;
-
- /*
- ** Search for the adapter. If an address has been given, search
- ** specifically for the card at that address. Otherwise find the
- ** first card in the system.
- */
-
- pos[0] = mca_device_read_stored_pos(mdev, 2);
- pos[1] = mca_device_read_stored_pos(mdev, 3);
-
- /*
- ** IO of card is handled by bits 1 and 2 of pos0.
- **
- ** bit2 bit1 IO
- ** 0 0 0x2c00
- ** 0 1 0x2c10
- ** 1 0 0x2c20
- ** 1 1 0x2c30
- */
- where = (pos[0] & 6) >> 1;
- iobase = 0x2c00 + (0x10 * where);
-
- /*
- ** Found the adapter we were looking for. Now start setting it up.
- **
- ** First work on decoding the IRQ. It's stored in the lower 4 bits
- ** of pos1. Bits are as follows (from the ADF file):
- **
- ** Bits
- ** 3 2 1 0 IRQ
- ** --------------------
- ** 0 0 1 0 5
- ** 0 0 0 1 9
- ** 0 1 0 0 10
- ** 1 0 0 0 11
- */
- where = pos[1] & 0x0f;
- switch (where) {
- case 1:
- irq = 9;
- break;
- case 2:
- irq = 5;
- break;
- case 4:
- irq = 10;
- break;
- case 8:
- irq = 11;
- break;
- default:
- printk("%s: mca_probe IRQ error. You should never get here (%d).\n", mdev->name, where);
- return -EINVAL;
- }
-
- /*
- ** Shared memory address of adapter is stored in bits 3-5 of pos0.
- ** They are mapped as follows:
- **
- ** Bit
- ** 5 4 3 Memory Addresses
- ** 0 0 0 C0000-CFFFF (64K)
- ** 1 0 0 C8000-CFFFF (32K)
- ** 0 0 1 D0000-DFFFF (64K)
- ** 1 0 1 D8000-DFFFF (32K)
- ** 0 1 0 E0000-EFFFF (64K)
- ** 1 1 0 E8000-EFFFF (32K)
- */
- where = (pos[0] & 0x18) >> 3;
- mem_start = 0xc0000 + (where * 0x10000);
- if (pos[0] & 0x20) {
- mem_start += 0x8000;
- }
-
- /* claim the slot */
- strncpy(mdev->name, depca_mca_adapter_name[mdev->index],
- sizeof(mdev->name));
- mca_device_set_claim(mdev, 1);
-
- /*
- ** Get everything allocated and initialized... (almost just
- ** like the ISA and EISA probes)
- */
- irq = mca_device_transform_irq(mdev, irq);
- iobase = mca_device_transform_ioport(mdev, iobase);
-
- if ((err = depca_common_init (iobase, &dev)))
- goto out_unclaim;
-
- dev->irq = irq;
- dev->base_addr = iobase;
- lp = netdev_priv(dev);
- lp->depca_bus = DEPCA_BUS_MCA;
- lp->adapter = depca_mca_adapter_type[mdev->index];
- lp->mem_start = mem_start;
-
- if ((err = depca_hw_init(dev, device)))
- goto out_free;
-
- return 0;
-
- out_free:
- free_netdev (dev);
- release_region (iobase, DEPCA_TOTAL_SIZE);
- out_unclaim:
- mca_device_set_claim(mdev, 0);
-
- return err;
-}
-#endif
-
/*
** ISA bus I/O device probe
*/
@@ -2059,15 +1870,10 @@ static int __init depca_module_init (void)
{
int err = 0;
-#ifdef CONFIG_MCA
- err = mca_register_driver(&depca_mca_driver);
- if (err)
- goto err;
-#endif
#ifdef CONFIG_EISA
err = eisa_driver_register(&depca_eisa_driver);
if (err)
- goto err_mca;
+ goto err_eisa;
#endif
err = platform_driver_register(&depca_isa_driver);
if (err)
@@ -2079,11 +1885,6 @@ static int __init depca_module_init (void)
err_eisa:
#ifdef CONFIG_EISA
eisa_driver_unregister(&depca_eisa_driver);
-err_mca:
-#endif
-#ifdef CONFIG_MCA
- mca_unregister_driver(&depca_mca_driver);
-err:
#endif
return err;
}
@@ -2091,9 +1892,6 @@ err:
static void __exit depca_module_exit (void)
{
int i;
-#ifdef CONFIG_MCA
- mca_unregister_driver (&depca_mca_driver);
-#endif
#ifdef CONFIG_EISA
eisa_driver_unregister (&depca_eisa_driver);
#endif