summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cadence/macb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/cadence/macb.c')
-rw-r--r--drivers/net/ethernet/cadence/macb.c18
1 files changed, 18 insertions, 0 deletions
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 61aa570aad9a..fc646a41d548 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev)
else
phydev->supported &= PHY_BASIC_FEATURES;
+ if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
+ phydev->supported &= ~SUPPORTED_1000baseT_Half;
+
phydev->advertising = phydev->supported;
bp->link = 0;
@@ -1037,6 +1040,12 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
* add that if/when we get our hands on a full-blown MII PHY.
*/
+ /* There is a hardware issue under heavy load where DMA can
+ * stop, this causes endless "used buffer descriptor read"
+ * interrupts but it can be cleared by re-enabling RX. See
+ * the at91 manual, section 41.3.1 or the Zynq manual
+ * section 16.7.4 for details.
+ */
if (status & MACB_BIT(RXUBR)) {
ctrl = macb_readl(bp, NCR);
macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE));
@@ -2693,6 +2702,14 @@ static const struct macb_config emac_config = {
.init = at91ether_init,
};
+static const struct macb_config zynq_config = {
+ .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE |
+ MACB_CAPS_NO_GIGABIT_HALF,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+};
+
static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,at32ap7000-macb" },
{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
@@ -2703,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config },
{ .compatible = "cdns,at91rm9200-emac", .data = &emac_config },
{ .compatible = "cdns,emac", .data = &emac_config },
+ { .compatible = "cdns,zynq-gem", .data = &zynq_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, macb_dt_ids);