diff options
Diffstat (limited to 'drivers/net/ethernet/freescale')
-rw-r--r-- | drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 114 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/fman/Kconfig | 28 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/fman/fman.c | 18 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/fman/fman.h | 5 |
5 files changed, 162 insertions, 9 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index fd93d542f497..ca74a684a904 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -1,4 +1,5 @@ /* Copyright 2008 - 2016 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -123,7 +124,22 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); #define FSL_QMAN_MAX_OAL 127 /* Default alignment for start of data in an Rx FD */ +#ifdef CONFIG_DPAA_ERRATUM_A050385 +/* aligning data start to 64 avoids DMA transaction splits, unless the buffer + * is crossing a 4k page boundary + */ +#define DPAA_FD_DATA_ALIGNMENT (fman_has_errata_a050385() ? 64 : 16) +/* aligning to 256 avoids DMA transaction splits caused by 4k page boundary + * crossings; also, all SG fragments except the last must have a size multiple + * of 256 to avoid DMA transaction splits + */ +#define DPAA_A050385_ALIGN 256 +#define DPAA_FD_RX_DATA_ALIGNMENT (fman_has_errata_a050385() ? \ + DPAA_A050385_ALIGN : 16) +#else #define DPAA_FD_DATA_ALIGNMENT 16 +#define DPAA_FD_RX_DATA_ALIGNMENT DPAA_FD_DATA_ALIGNMENT +#endif /* The DPAA requires 256 bytes reserved and mapped for the SGT */ #define DPAA_SGT_SIZE 256 @@ -158,8 +174,13 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms"); #define DPAA_PARSE_RESULTS_SIZE sizeof(struct fman_prs_result) #define DPAA_TIME_STAMP_SIZE 8 #define DPAA_HASH_RESULTS_SIZE 8 +#ifdef CONFIG_DPAA_ERRATUM_A050385 +#define DPAA_RX_PRIV_DATA_SIZE (DPAA_A050385_ALIGN - (DPAA_PARSE_RESULTS_SIZE\ + + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE)) +#else #define DPAA_RX_PRIV_DATA_SIZE (u16)(DPAA_TX_PRIV_DATA_SIZE + \ dpaa_rx_extra_headroom) +#endif #define DPAA_ETH_PCD_RXQ_NUM 128 @@ -180,7 +201,12 @@ static struct dpaa_bp *dpaa_bp_array[BM_MAX_NUM_OF_POOLS]; #define DPAA_BP_RAW_SIZE 4096 +#ifdef CONFIG_DPAA_ERRATUM_A050385 +#define dpaa_bp_size(raw_size) (SKB_WITH_OVERHEAD(raw_size) & \ + ~(DPAA_A050385_ALIGN - 1)) +#else #define dpaa_bp_size(raw_size) SKB_WITH_OVERHEAD(raw_size) +#endif static int dpaa_max_frm; @@ -1192,7 +1218,7 @@ static int dpaa_eth_init_rx_port(struct fman_port *port, struct dpaa_bp *bp, buf_prefix_content.pass_prs_result = true; buf_prefix_content.pass_hash_result = true; buf_prefix_content.pass_time_stamp = true; - buf_prefix_content.data_align = DPAA_FD_DATA_ALIGNMENT; + buf_prefix_content.data_align = DPAA_FD_RX_DATA_ALIGNMENT; rx_p = ¶ms.specific_params.rx_params; rx_p->err_fqid = errq->fqid; @@ -1662,6 +1688,8 @@ static u8 rx_csum_offload(const struct dpaa_priv *priv, const struct qm_fd *fd) return CHECKSUM_NONE; } +#define PTR_IS_ALIGNED(x, a) (IS_ALIGNED((unsigned long)(x), (a))) + /* Build a linear skb around the received buffer. * We are guaranteed there is enough room at the end of the data buffer to * accommodate the shared info area of the skb. @@ -1733,8 +1761,7 @@ static struct sk_buff *sg_fd_to_skb(const struct dpaa_priv *priv, sg_addr = qm_sg_addr(&sgt[i]); sg_vaddr = phys_to_virt(sg_addr); - WARN_ON(!IS_ALIGNED((unsigned long)sg_vaddr, - SMP_CACHE_BYTES)); + WARN_ON(!PTR_IS_ALIGNED(sg_vaddr, SMP_CACHE_BYTES)); dma_unmap_page(priv->rx_dma_dev, sg_addr, DPAA_BP_RAW_SIZE, DMA_FROM_DEVICE); @@ -2022,6 +2049,75 @@ static inline int dpaa_xmit(struct dpaa_priv *priv, return 0; } +#ifdef CONFIG_DPAA_ERRATUM_A050385 +int dpaa_a050385_wa(struct net_device *net_dev, struct sk_buff **s) +{ + struct dpaa_priv *priv = netdev_priv(net_dev); + struct sk_buff *new_skb, *skb = *s; + unsigned char *start, i; + + /* check linear buffer alignment */ + if (!PTR_IS_ALIGNED(skb->data, DPAA_A050385_ALIGN)) + goto workaround; + + /* linear buffers just need to have an aligned start */ + if (!skb_is_nonlinear(skb)) + return 0; + + /* linear data size for nonlinear skbs needs to be aligned */ + if (!IS_ALIGNED(skb_headlen(skb), DPAA_A050385_ALIGN)) + goto workaround; + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + /* all fragments need to have aligned start addresses */ + if (!IS_ALIGNED(skb_frag_off(frag), DPAA_A050385_ALIGN)) + goto workaround; + + /* all but last fragment need to have aligned sizes */ + if (!IS_ALIGNED(skb_frag_size(frag), DPAA_A050385_ALIGN) && + (i < skb_shinfo(skb)->nr_frags - 1)) + goto workaround; + } + + return 0; + +workaround: + /* copy all the skb content into a new linear buffer */ + new_skb = netdev_alloc_skb(net_dev, skb->len + DPAA_A050385_ALIGN - 1 + + priv->tx_headroom); + if (!new_skb) + return -ENOMEM; + + /* NET_SKB_PAD bytes already reserved, adding up to tx_headroom */ + skb_reserve(new_skb, priv->tx_headroom - NET_SKB_PAD); + + /* Workaround for DPAA_A050385 requires data start to be aligned */ + start = PTR_ALIGN(new_skb->data, DPAA_A050385_ALIGN); + if (start - new_skb->data != 0) + skb_reserve(new_skb, start - new_skb->data); + + skb_put(new_skb, skb->len); + skb_copy_bits(skb, 0, new_skb->data, skb->len); + skb_copy_header(new_skb, skb); + new_skb->dev = skb->dev; + + /* We move the headroom when we align it so we have to reset the + * network and transport header offsets relative to the new data + * pointer. The checksum offload relies on these offsets. + */ + skb_set_network_header(new_skb, skb_network_offset(skb)); + skb_set_transport_header(new_skb, skb_transport_offset(skb)); + + /* TODO: does timestamping need the result in the old skb? */ + dev_kfree_skb(skb); + *s = new_skb; + + return 0; +} +#endif + static netdev_tx_t dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) { @@ -2068,6 +2164,14 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev) nonlinear = skb_is_nonlinear(skb); } +#ifdef CONFIG_DPAA_ERRATUM_A050385 + if (unlikely(fman_has_errata_a050385())) { + if (dpaa_a050385_wa(net_dev, &skb)) + goto enomem; + nonlinear = skb_is_nonlinear(skb); + } +#endif + if (nonlinear) { /* Just create a S/G fd based on the skb */ err = skb_to_sg_fd(priv, skb, &fd); @@ -2741,9 +2845,7 @@ static inline u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl) headroom = (u16)(bl->priv_data_size + DPAA_PARSE_RESULTS_SIZE + DPAA_TIME_STAMP_SIZE + DPAA_HASH_RESULTS_SIZE); - return DPAA_FD_DATA_ALIGNMENT ? ALIGN(headroom, - DPAA_FD_DATA_ALIGNMENT) : - headroom; + return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT); } static int dpaa_eth_probe(struct platform_device *pdev) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 4432a59904c7..23c5fef2f1ad 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2529,15 +2529,15 @@ fec_enet_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ec) return -EINVAL; } - cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr); + cycle = fec_enet_us_to_itr_clock(ndev, ec->rx_coalesce_usecs); if (cycle > 0xFFFF) { dev_err(dev, "Rx coalesced usec exceed hardware limitation\n"); return -EINVAL; } - cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr); + cycle = fec_enet_us_to_itr_clock(ndev, ec->tx_coalesce_usecs); if (cycle > 0xFFFF) { - dev_err(dev, "Rx coalesced usec exceed hardware limitation\n"); + dev_err(dev, "Tx coalesced usec exceed hardware limitation\n"); return -EINVAL; } diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig index 0139cb9042ec..34150182cc35 100644 --- a/drivers/net/ethernet/freescale/fman/Kconfig +++ b/drivers/net/ethernet/freescale/fman/Kconfig @@ -8,3 +8,31 @@ config FSL_FMAN help Freescale Data-Path Acceleration Architecture Frame Manager (FMan) support + +config DPAA_ERRATUM_A050385 + bool + depends on ARM64 && FSL_DPAA + default y + help + DPAA FMan erratum A050385 software workaround implementation: + align buffers, data start, SG fragment length to avoid FMan DMA + splits. + FMAN DMA read or writes under heavy traffic load may cause FMAN + internal resource leak thus stopping further packet processing. + The FMAN internal queue can overflow when FMAN splits single + read or write transactions into multiple smaller transactions + such that more than 17 AXI transactions are in flight from FMAN + to interconnect. When the FMAN internal queue overflows, it can + stall further packet processing. The issue can occur with any + one of the following three conditions: + 1. FMAN AXI transaction crosses 4K address boundary (Errata + A010022) + 2. FMAN DMA address for an AXI transaction is not 16 byte + aligned, i.e. the last 4 bits of an address are non-zero + 3. Scatter Gather (SG) frames have more than one SG buffer in + the SG list and any one of the buffers, except the last + buffer in the SG list has data size that is not a multiple + of 16 bytes, i.e., other than 16, 32, 48, 64, etc. + With any one of the above three conditions present, there is + likelihood of stalled FMAN packet processing, especially under + stress with multiple ports injecting line-rate traffic. diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index 934111def0be..f151d6e111dd 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -1,5 +1,6 @@ /* * Copyright 2008-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -566,6 +567,10 @@ struct fman_cfg { u32 qmi_def_tnums_thresh; }; +#ifdef CONFIG_DPAA_ERRATUM_A050385 +static bool fman_has_err_a050385; +#endif + static irqreturn_t fman_exceptions(struct fman *fman, enum fman_exceptions exception) { @@ -2518,6 +2523,14 @@ struct fman *fman_bind(struct device *fm_dev) } EXPORT_SYMBOL(fman_bind); +#ifdef CONFIG_DPAA_ERRATUM_A050385 +bool fman_has_errata_a050385(void) +{ + return fman_has_err_a050385; +} +EXPORT_SYMBOL(fman_has_errata_a050385); +#endif + static irqreturn_t fman_err_irq(int irq, void *handle) { struct fman *fman = (struct fman *)handle; @@ -2845,6 +2858,11 @@ static struct fman *read_dts_node(struct platform_device *of_dev) goto fman_free; } +#ifdef CONFIG_DPAA_ERRATUM_A050385 + fman_has_err_a050385 = + of_property_read_bool(fm_node, "fsl,erratum-a050385"); +#endif + return fman; fman_node_put: diff --git a/drivers/net/ethernet/freescale/fman/fman.h b/drivers/net/ethernet/freescale/fman/fman.h index 935c317fa696..f2ede1360f03 100644 --- a/drivers/net/ethernet/freescale/fman/fman.h +++ b/drivers/net/ethernet/freescale/fman/fman.h @@ -1,5 +1,6 @@ /* * Copyright 2008-2015 Freescale Semiconductor Inc. + * Copyright 2020 NXP * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -398,6 +399,10 @@ u16 fman_get_max_frm(void); int fman_get_rx_extra_headroom(void); +#ifdef CONFIG_DPAA_ERRATUM_A050385 +bool fman_has_errata_a050385(void); +#endif + struct fman *fman_bind(struct device *dev); #endif /* __FM_H */ |