summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c240
1 files changed, 231 insertions, 9 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 0b82d38bc97d..207f68fbe3d3 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -58,6 +58,10 @@ static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg_wait_to_complete);
static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
static bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
{
@@ -219,6 +223,25 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
s32 ret_val = 0;
+ u32 esdp;
+
+ if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+ /* Store flag indicating I2C bus access control unit. */
+ hw->phy.qsfp_shared_i2c_bus = true;
+
+ /* Initialize access to QSFP+ I2C bus */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0_DIR;
+ esdp &= ~IXGBE_ESDP_SDP1_DIR;
+ esdp &= ~IXGBE_ESDP_SDP0;
+ esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+ esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
+ phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
+ }
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
@@ -397,6 +420,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_LS:
media_type = ixgbe_media_type_fiber_lco;
break;
+ case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+ media_type = ixgbe_media_type_fiber_qsfp;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
@@ -527,6 +553,75 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
}
/**
+ * ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber
+ * @hw: pointer to hardware structure
+ * @speed: link speed to set
+ *
+ * We set the module speed differently for fixed fiber. For other
+ * multi-speed devices we don't have an error value so here if we
+ * detect an error we just log it and exit.
+ */
+static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed)
+{
+ s32 status;
+ u8 rs, eeprom_data;
+
+ switch (speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ /* one bit mask same as setting on */
+ rs = IXGBE_SFF_SOFT_RS_SELECT_10G;
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
+ break;
+ default:
+ hw_dbg(hw, "Invalid fixed module speed\n");
+ return;
+ }
+
+ /* Set RS0 */
+ status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ &eeprom_data);
+ if (status) {
+ hw_dbg(hw, "Failed to read Rx Rate Select RS0\n");
+ goto out;
+ }
+
+ eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs;
+
+ status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ eeprom_data);
+ if (status) {
+ hw_dbg(hw, "Failed to write Rx Rate Select RS0\n");
+ goto out;
+ }
+
+ /* Set RS1 */
+ status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ &eeprom_data);
+ if (status) {
+ hw_dbg(hw, "Failed to read Rx Rate Select RS1\n");
+ goto out;
+ }
+
+ eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs;
+
+ status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ eeprom_data);
+ if (status) {
+ hw_dbg(hw, "Failed to write Rx Rate Select RS1\n");
+ goto out;
+ }
+out:
+ return;
+}
+
+/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
* @speed: new link speed
@@ -573,9 +668,14 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
goto out;
/* Set the module link speed */
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
+ ixgbe_set_fiber_fixed_speed(hw,
+ IXGBE_LINK_SPEED_10GB_FULL);
+ } else {
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ }
/* Allow module to change analog characteristics (1G->10G) */
msleep(40);
@@ -625,10 +725,15 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
goto out;
/* Set the module link speed */
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
+ if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) {
+ ixgbe_set_fiber_fixed_speed(hw,
+ IXGBE_LINK_SPEED_1GB_FULL);
+ } else {
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ }
/* Allow module to change analog characteristics (10G->1G) */
msleep(40);
@@ -1872,7 +1977,7 @@ static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
goto out;
else
- status = ixgbe_identify_sfp_module_generic(hw);
+ status = ixgbe_identify_module_generic(hw);
}
/* Set PHY type none if no PHY detected */
@@ -1978,10 +2083,12 @@ sfp_check:
switch (hw->phy.type) {
case ixgbe_phy_sfp_passive_tyco:
case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_qsfp_passive_unknown:
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
break;
case ixgbe_phy_sfp_ftl_active:
case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
break;
case ixgbe_phy_sfp_avago:
@@ -1999,6 +2106,15 @@ sfp_check:
else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
break;
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
default:
break;
}
@@ -2236,6 +2352,112 @@ reset_pipeline_out:
return ret_val;
}
+/**
+ * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ usleep_range(5000, 10000);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ u32 esdp;
+ s32 status;
+ s32 timeout = 200;
+
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Acquire I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp |= IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+
+ while (timeout) {
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ break;
+
+ usleep_range(5000, 10000);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
+ status = IXGBE_ERR_I2C;
+ goto release_i2c_access;
+ }
+ }
+
+ status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
+
+release_i2c_access:
+ if (hw->phy.qsfp_shared_i2c_bus == true) {
+ /* Release I2C bus ownership. */
+ esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ esdp &= ~IXGBE_ESDP_SDP0;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ return status;
+}
+
static struct ixgbe_mac_operations mac_ops_82599 = {
.init_hw = &ixgbe_init_hw_generic,
.reset_hw = &ixgbe_reset_hw_82599,
@@ -2300,7 +2522,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
static struct ixgbe_phy_operations phy_ops_82599 = {
.identify = &ixgbe_identify_phy_82599,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .identify_sfp = &ixgbe_identify_module_generic,
.init = &ixgbe_init_phy_ops_82599,
.reset = &ixgbe_reset_phy_generic,
.read_reg = &ixgbe_read_phy_reg_generic,