diff options
Diffstat (limited to 'drivers/net/ethernet/marvell')
| -rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 34 | ||||
| -rw-r--r-- | drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 58 |
2 files changed, 13 insertions, 79 deletions
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 5a7bdca22a63..67a644177880 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3823,8 +3823,6 @@ static void mvneta_validate(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - /* We only support QSGMII, SGMII, 802.3z and RGMII modes. * When in 802.3z mode, we must have AN enabled: * "Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... @@ -3836,34 +3834,7 @@ static void mvneta_validate(struct phylink_config *config, return; } - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - - /* Asymmetric pause is unsupported */ - phylink_set(mask, Pause); - - /* Half-duplex at speeds higher than 100Mbit is unsupported */ - if (state->interface != PHY_INTERFACE_MODE_2500BASEX) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - } - - if (state->interface == PHY_INTERFACE_MODE_2500BASEX) { - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - } - - if (!phy_interface_mode_is_8023z(state->interface)) { - /* 10M and 100M are only supported in non-802.3z mode */ - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - } - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); + phylink_generic_validate(config, supported, state); } static void mvneta_mac_pcs_get_state(struct phylink_config *config, @@ -5166,6 +5137,9 @@ static int mvneta_probe(struct platform_device *pdev) pp->phylink_config.dev = &dev->dev; pp->phylink_config.type = PHYLINK_NETDEV; + pp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | + MAC_100 | MAC_1000FD | MAC_2500FD; + phy_interface_set_rgmii(pp->phylink_config.supported_interfaces); __set_bit(PHY_INTERFACE_MODE_QSGMII, pp->phylink_config.supported_interfaces); diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 2b18d89d9756..df6c793f4b1b 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6260,9 +6260,6 @@ static void mvpp2_phylink_validate(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state) { - struct mvpp2_port *port = mvpp2_phylink_to_port(config); - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - /* When in 802.3z mode, we must have AN enabled: * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... * When <PortType> = 1 (1000BASE-X) this field must be set to 1. @@ -6271,52 +6268,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config, !phylink_test(state->advertising, Autoneg)) goto empty_set; - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - - if (port->priv->global_tx_fc) { - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - } - - switch (state->interface) { - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_XAUI: - if (mvpp2_port_supports_xlg(port)) { - phylink_set_10g_modes(mask); - phylink_set(mask, 10000baseKR_Full); - } - break; - - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_SGMII: - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_1000BASEX: - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); - break; - - case PHY_INTERFACE_MODE_2500BASEX: - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - break; - - default: - goto empty_set; - } - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); + phylink_generic_validate(config, supported, state); return; empty_set: @@ -6911,12 +6863,20 @@ static int mvpp2_port_probe(struct platform_device *pdev, if (!mvpp2_use_acpi_compat_mode(port_fwnode)) { port->phylink_config.dev = &dev->dev; port->phylink_config.type = PHYLINK_NETDEV; + port->phylink_config.mac_capabilities = + MAC_2500FD | MAC_1000FD | MAC_100 | MAC_10; + + if (port->priv->global_tx_fc) + port->phylink_config.mac_capabilities |= + MAC_SYM_PAUSE | MAC_ASYM_PAUSE; if (mvpp2_port_supports_xlg(port)) { __set_bit(PHY_INTERFACE_MODE_10GBASER, port->phylink_config.supported_interfaces); __set_bit(PHY_INTERFACE_MODE_XAUI, port->phylink_config.supported_interfaces); + port->phylink_config.mac_capabilities |= + MAC_10000FD; } if (mvpp2_port_supports_rgmii(port)) |