summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c')
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c54
1 files changed, 27 insertions, 27 deletions
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 08efb4635007..f67652de5a63 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -131,12 +131,13 @@ static const char qlcnic_83xx_rx_stats_strings[][ETH_GSTRING_LEN] = {
"ctx_lro_pkt_cnt",
"ctx_ip_csum_error",
"ctx_rx_pkts_wo_ctx",
- "ctx_rx_pkts_dropped_wo_sts",
+ "ctx_rx_pkts_drop_wo_sds_on_card",
+ "ctx_rx_pkts_drop_wo_sds_on_host",
"ctx_rx_osized_pkts",
"ctx_rx_pkts_dropped_wo_rds",
"ctx_rx_unexpected_mcast_pkts",
"ctx_invalid_mac_address",
- "ctx_rx_rds_ring_prim_attemoted",
+ "ctx_rx_rds_ring_prim_attempted",
"ctx_rx_rds_ring_prim_success",
"ctx_num_lro_flows_added",
"ctx_num_lro_flows_removed",
@@ -251,6 +252,18 @@ static int
qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+ if (qlcnic_82xx_check(adapter))
+ return qlcnic_82xx_get_settings(adapter, ecmd);
+ else if (qlcnic_83xx_check(adapter))
+ return qlcnic_83xx_get_settings(adapter, ecmd);
+
+ return -EIO;
+}
+
+int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
+ struct ethtool_cmd *ecmd)
+{
struct qlcnic_hardware_context *ahw = adapter->ahw;
u32 speed, reg;
int check_sfp_module = 0;
@@ -276,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
} else if (adapter->ahw->port_type == QLCNIC_XGBE) {
u32 val = 0;
- if (qlcnic_83xx_check(adapter))
- qlcnic_83xx_get_settings(adapter);
- else
- val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
+ val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
if (val == QLCNIC_PORT_MODE_802_3_AP) {
ecmd->supported = SUPPORTED_1000baseT_Full;
@@ -289,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
ecmd->advertising = ADVERTISED_10000baseT_Full;
}
- if (netif_running(dev) && adapter->ahw->has_link_events) {
- if (qlcnic_82xx_check(adapter)) {
- reg = QLCRD32(adapter,
- P3P_LINK_SPEED_REG(pcifn));
- speed = P3P_LINK_SPEED_VAL(pcifn, reg);
- ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
- }
- ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
- ecmd->autoneg = adapter->ahw->link_autoneg;
- ecmd->duplex = adapter->ahw->link_duplex;
+ if (netif_running(adapter->netdev) && ahw->has_link_events) {
+ reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
+ speed = P3P_LINK_SPEED_VAL(pcifn, reg);
+ ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
+ ethtool_cmd_speed_set(ecmd, ahw->link_speed);
+ ecmd->autoneg = ahw->link_autoneg;
+ ecmd->duplex = ahw->link_duplex;
goto skip;
}
@@ -340,8 +347,8 @@ skip:
case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
- check_sfp_module = netif_running(dev) &&
- adapter->ahw->has_link_events;
+ check_sfp_module = netif_running(adapter->netdev) &&
+ ahw->has_link_events;
case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
@@ -355,8 +362,8 @@ skip:
ecmd->advertising |=
(ADVERTISED_FIBRE | ADVERTISED_TP);
ecmd->port = PORT_FIBRE;
- check_sfp_module = netif_running(dev) &&
- adapter->ahw->has_link_events;
+ check_sfp_module = netif_running(adapter->netdev) &&
+ ahw->has_link_events;
} else {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
@@ -365,13 +372,6 @@ skip:
ecmd->port = PORT_TP;
}
break;
- case QLCNIC_BRDTYPE_83XX_10G:
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
- ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
- ecmd->port = PORT_FIBRE;
- check_sfp_module = netif_running(dev) && ahw->has_link_events;
- break;
default:
dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
adapter->ahw->board_type);