summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/via/via-rhine.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/via/via-rhine.c')
-rw-r--r--drivers/net/ethernet/via/via-rhine.c2340
1 files changed, 2340 insertions, 0 deletions
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
new file mode 100644
index 000000000000..f34dd99fe579
--- /dev/null
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -0,0 +1,2340 @@
+/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */
+/*
+ Written 1998-2001 by Donald Becker.
+
+ Current Maintainer: Roger Luethi <rl@hellgate.ch>
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This driver is designed for the VIA VT86C100A Rhine-I.
+ It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM
+ and management NIC 6105M).
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+
+ This driver contains some changes from the original Donald Becker
+ version. He may or may not be interested in bug reports on this
+ code. You can find his versions at:
+ http://www.scyld.com/network/via-rhine.html
+ [link no longer provides useful info -jgarzik]
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "via-rhine"
+#define DRV_VERSION "1.5.0"
+#define DRV_RELDATE "2010-10-09"
+
+
+/* A few user-configurable values.
+ These may be modified when a driver module is loaded. */
+
+#define DEBUG
+static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
+static int max_interrupt_work = 20;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1518 effectively disables this feature. */
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+ defined(CONFIG_SPARC) || defined(__ia64__) || \
+ defined(__sh__) || defined(__mips__)
+static int rx_copybreak = 1518;
+#else
+static int rx_copybreak;
+#endif
+
+/* Work-around for broken BIOSes: they are unable to get the chip back out of
+ power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
+static int avoid_D3;
+
+/*
+ * In case you are looking for 'options[]' or 'full_duplex[]', they
+ * are gone. Use ethtool(8) instead.
+ */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+ The Rhine has a 64 element 8390-like hash table. */
+static const int multicast_filter_limit = 32;
+
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ Making the Tx ring too large decreases the effectiveness of channel
+ bonding and packet priority.
+ There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE 16
+#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
+#define RX_RING_SIZE 64
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <linux/dmi.h>
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] __devinitconst =
+ "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker";
+
+/* This driver was written to use PCI memory space. Some early versions
+ of the Rhine may only work correctly with I/O space accesses. */
+#ifdef CONFIG_VIA_RHINE_MMIO
+#define USE_MMIO
+#else
+#endif
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(max_interrupt_work, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(avoid_D3, bool, 0);
+MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
+MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
+
+#define MCAM_SIZE 32
+#define VCAM_SIZE 32
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet
+controller.
+
+II. Board-specific settings
+
+Boards with this chip are functional only in a bus-master PCI slot.
+
+Many operational settings are loaded from the EEPROM to the Config word at
+offset 0x78. For most of these settings, this driver assumes that they are
+correct.
+If this driver is compiled to use PCI memory space operations the EEPROM
+must be configured to enable memory ops.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver attempts to use a zero-copy receive and transmit scheme.
+
+Alas, all data buffers are required to start on a 32 bit boundary, so
+the driver must often copy transmit packets into bounce buffers.
+
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack. Buffers consumed this way are replaced by newly allocated
+skbuffs in the last phase of rhine_rx().
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames. New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets. When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine. Copying also preloads the cache, which is
+most useful with small frames.
+
+Since the VIA chips are only able to transfer data to buffers on 32 bit
+boundaries, the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing. Copying these unaligned buffers
+has the beneficial effect of 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler,
+which is single threaded by the hardware and interrupt handling software.
+
+The send packet thread has partial control over the Tx ring. It locks the
+netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in
+the ring is not available it stops the transmit queue by
+calling netif_stop_queue.
+
+The interrupt handler has exclusive control over the Rx ring and records stats
+from the Tx ring. After reaping the stats, it marks the Tx queue entry as
+empty by incrementing the dirty_tx mark. If at least half of the entries in
+the Rx ring are available the transmit queue is woken up if it was stopped.
+
+IV. Notes
+
+IVb. References
+
+Preliminary VT86C100A manual from http://www.via.com.tw/
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf
+ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF
+
+
+IVc. Errata
+
+The VT86C100A manual is not reliable information.
+The 3043 chip does not handle unaligned transmit or receive buffers, resulting
+in significant performance degradation for bounce buffer copies on transmit
+and unaligned IP headers on receive.
+The chip does not pad to minimum transmit length.
+
+*/
+
+
+/* This table drives the PCI probe routines. It's mostly boilerplate in all
+ of the drivers, and will likely be provided by some future kernel.
+ Note the matching code -- the first table entry matchs all 56** cards but
+ second only the 1234 card.
+*/
+
+enum rhine_revs {
+ VT86C100A = 0x00,
+ VTunknown0 = 0x20,
+ VT6102 = 0x40,
+ VT8231 = 0x50, /* Integrated MAC */
+ VT8233 = 0x60, /* Integrated MAC */
+ VT8235 = 0x74, /* Integrated MAC */
+ VT8237 = 0x78, /* Integrated MAC */
+ VTunknown1 = 0x7C,
+ VT6105 = 0x80,
+ VT6105_B0 = 0x83,
+ VT6105L = 0x8A,
+ VT6107 = 0x8C,
+ VTunknown2 = 0x8E,
+ VT6105M = 0x90, /* Management adapter */
+};
+
+enum rhine_quirks {
+ rqWOL = 0x0001, /* Wake-On-LAN support */
+ rqForceReset = 0x0002,
+ rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */
+ rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */
+ rqRhineI = 0x0100, /* See comment below */
+};
+/*
+ * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable
+ * MMIO as well as for the collision counter and the Tx FIFO underflow
+ * indicator. In addition, Tx and Rx buffers need to 4 byte aligned.
+ */
+
+/* Beware of PCI posted writes */
+#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0)
+
+static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = {
+ { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */
+ { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */
+ { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */
+ { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
+
+
+/* Offsets to the device registers. */
+enum register_offsets {
+ StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
+ ChipCmd1=0x09, TQWake=0x0A,
+ IntrStatus=0x0C, IntrEnable=0x0E,
+ MulticastFilter0=0x10, MulticastFilter1=0x14,
+ RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
+ MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F,
+ MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
+ ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
+ RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
+ StickyHW=0x83, IntrStatus2=0x84,
+ CamMask=0x88, CamCon=0x92, CamAddr=0x93,
+ WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
+ WOLcrClr1=0xA6, WOLcgClr=0xA7,
+ PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
+};
+
+/* Bits in ConfigD */
+enum backoff_bits {
+ BackOptional=0x01, BackModify=0x02,
+ BackCaptureEffect=0x04, BackRandom=0x08
+};
+
+/* Bits in the TxConfig (TCR) register */
+enum tcr_bits {
+ TCR_PQEN=0x01,
+ TCR_LB0=0x02, /* loopback[0] */
+ TCR_LB1=0x04, /* loopback[1] */
+ TCR_OFSET=0x08,
+ TCR_RTGOPT=0x10,
+ TCR_RTFT0=0x20,
+ TCR_RTFT1=0x40,
+ TCR_RTSF=0x80,
+};
+
+/* Bits in the CamCon (CAMC) register */
+enum camcon_bits {
+ CAMC_CAMEN=0x01,
+ CAMC_VCAMSL=0x02,
+ CAMC_CAMWR=0x04,
+ CAMC_CAMRD=0x08,
+};
+
+/* Bits in the PCIBusConfig1 (BCR1) register */
+enum bcr1_bits {
+ BCR1_POT0=0x01,
+ BCR1_POT1=0x02,
+ BCR1_POT2=0x04,
+ BCR1_CTFT0=0x08,
+ BCR1_CTFT1=0x10,
+ BCR1_CTSF=0x20,
+ BCR1_TXQNOBK=0x40, /* for VT6105 */
+ BCR1_VIDFR=0x80, /* for VT6105 */
+ BCR1_MED0=0x40, /* for VT6102 */
+ BCR1_MED1=0x80, /* for VT6102 */
+};
+
+#ifdef USE_MMIO
+/* Registers we check that mmio and reg are the same. */
+static const int mmio_verify_registers[] = {
+ RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD,
+ 0
+};
+#endif
+
+/* Bits in the interrupt status/mask registers. */
+enum intr_status_bits {
+ IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020,
+ IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210,
+ IntrPCIErr=0x0040,
+ IntrStatsMax=0x0080, IntrRxEarly=0x0100,
+ IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000,
+ IntrTxAborted=0x2000, IntrLinkChange=0x4000,
+ IntrRxWakeUp=0x8000,
+ IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260,
+ IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */
+ IntrTxErrSummary=0x082218,
+};
+
+/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */
+enum wol_bits {
+ WOLucast = 0x10,
+ WOLmagic = 0x20,
+ WOLbmcast = 0x30,
+ WOLlnkon = 0x40,
+ WOLlnkoff = 0x80,
+};
+
+/* The Rx and Tx buffer descriptors. */
+struct rx_desc {
+ __le32 rx_status;
+ __le32 desc_length; /* Chain flag, Buffer/frame length */
+ __le32 addr;
+ __le32 next_desc;
+};
+struct tx_desc {
+ __le32 tx_status;
+ __le32 desc_length; /* Chain flag, Tx Config, Frame length */
+ __le32 addr;
+ __le32 next_desc;
+};
+
+/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */
+#define TXDESC 0x00e08000
+
+enum rx_status_bits {
+ RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F
+};
+
+/* Bits in *_desc.*_status */
+enum desc_status_bits {
+ DescOwn=0x80000000
+};
+
+/* Bits in *_desc.*_length */
+enum desc_length_bits {
+ DescTag=0x00010000
+};
+
+/* Bits in ChipCmd. */
+enum chip_cmd_bits {
+ CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
+ CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40,
+ Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04,
+ Cmd1NoTxPoll=0x08, Cmd1Reset=0x80,
+};
+
+struct rhine_private {
+ /* Bit mask for configured VLAN ids */
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+ /* Descriptor rings */
+ struct rx_desc *rx_ring;
+ struct tx_desc *tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+
+ /* The addresses of receive-in-place skbuffs. */
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ dma_addr_t rx_skbuff_dma[RX_RING_SIZE];
+
+ /* The saved address of a sent-in-place packet/buffer, for later free(). */
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
+
+ /* Tx bounce buffers (Rhine-I only) */
+ unsigned char *tx_buf[TX_RING_SIZE];
+ unsigned char *tx_bufs;
+ dma_addr_t tx_bufs_dma;
+
+ struct pci_dev *pdev;
+ long pioaddr;
+ struct net_device *dev;
+ struct napi_struct napi;
+ spinlock_t lock;
+ struct work_struct reset_task;
+
+ /* Frequently used values: keep some adjacent for cache effect. */
+ u32 quirks;
+ struct rx_desc *rx_head_desc;
+ unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
+ unsigned int cur_tx, dirty_tx;
+ unsigned int rx_buf_sz; /* Based on MTU+slack. */
+ u8 wolopts;
+
+ u8 tx_thresh, rx_thresh;
+
+ struct mii_if_info mii_if;
+ void __iomem *base;
+};
+
+#define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
+#define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
+#define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
+#define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
+#define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
+#define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
+#define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
+
+
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
+static int rhine_open(struct net_device *dev);
+static void rhine_reset_task(struct work_struct *work);
+static void rhine_tx_timeout(struct net_device *dev);
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance);
+static void rhine_tx(struct net_device *dev);
+static int rhine_rx(struct net_device *dev, int limit);
+static void rhine_error(struct net_device *dev, int intr_status);
+static void rhine_set_rx_mode(struct net_device *dev);
+static struct net_device_stats *rhine_get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static const struct ethtool_ops netdev_ethtool_ops;
+static int rhine_close(struct net_device *dev);
+static void rhine_shutdown (struct pci_dev *pdev);
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid);
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid);
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_init_cam_filter(struct net_device *dev);
+static void rhine_update_vcam(struct net_device *dev);
+
+#define RHINE_WAIT_FOR(condition) \
+do { \
+ int i = 1024; \
+ while (!(condition) && --i) \
+ ; \
+ if (debug > 1 && i < 512) \
+ pr_info("%4d cycles used @ %s:%d\n", \
+ 1024 - i, __func__, __LINE__); \
+} while (0)
+
+static inline u32 get_intr_status(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 intr_status;
+
+ intr_status = ioread16(ioaddr + IntrStatus);
+ /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */
+ if (rp->quirks & rqStatusWBRace)
+ intr_status |= ioread8(ioaddr + IntrStatus2) << 16;
+ return intr_status;
+}
+
+/*
+ * Get power related registers into sane state.
+ * Notify user about past WOL event.
+ */
+static void rhine_power_init(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u16 wolstat;
+
+ if (rp->quirks & rqWOL) {
+ /* Make sure chip is in power state D0 */
+ iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW);
+
+ /* Disable "force PME-enable" */
+ iowrite8(0x80, ioaddr + WOLcgClr);
+
+ /* Clear power-event config bits (WOL) */
+ iowrite8(0xFF, ioaddr + WOLcrClr);
+ /* More recent cards can manage two additional patterns */
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x03, ioaddr + WOLcrClr1);
+
+ /* Save power-event status bits */
+ wolstat = ioread8(ioaddr + PwrcsrSet);
+ if (rp->quirks & rq6patterns)
+ wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8;
+
+ /* Clear power-event status bits */
+ iowrite8(0xFF, ioaddr + PwrcsrClr);
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x03, ioaddr + PwrcsrClr1);
+
+ if (wolstat) {
+ char *reason;
+ switch (wolstat) {
+ case WOLmagic:
+ reason = "Magic packet";
+ break;
+ case WOLlnkon:
+ reason = "Link went up";
+ break;
+ case WOLlnkoff:
+ reason = "Link went down";
+ break;
+ case WOLucast:
+ reason = "Unicast packet";
+ break;
+ case WOLbmcast:
+ reason = "Multicast/broadcast packet";
+ break;
+ default:
+ reason = "Unknown";
+ }
+ netdev_info(dev, "Woke system up. Reason: %s\n",
+ reason);
+ }
+ }
+}
+
+static void rhine_chip_reset(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ iowrite8(Cmd1Reset, ioaddr + ChipCmd1);
+ IOSYNC;
+
+ if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) {
+ netdev_info(dev, "Reset not complete yet. Trying harder.\n");
+
+ /* Force reset */
+ if (rp->quirks & rqForceReset)
+ iowrite8(0x40, ioaddr + MiscCmd);
+
+ /* Reset can take somewhat longer (rare) */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset));
+ }
+
+ if (debug > 1)
+ netdev_info(dev, "Reset %s\n",
+ (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ?
+ "failed" : "succeeded");
+}
+
+#ifdef USE_MMIO
+static void enable_mmio(long pioaddr, u32 quirks)
+{
+ int n;
+ if (quirks & rqRhineI) {
+ /* More recent docs say that this bit is reserved ... */
+ n = inb(pioaddr + ConfigA) | 0x20;
+ outb(n, pioaddr + ConfigA);
+ } else {
+ n = inb(pioaddr + ConfigD) | 0x80;
+ outb(n, pioaddr + ConfigD);
+ }
+}
+#endif
+
+/*
+ * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM
+ * (plus 0x6C for Rhine-I/II)
+ */
+static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ outb(0x20, pioaddr + MACRegEEcsr);
+ RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20));
+
+#ifdef USE_MMIO
+ /*
+ * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable
+ * MMIO. If reloading EEPROM was done first this could be avoided, but
+ * it is not known if that still works with the "win98-reboot" problem.
+ */
+ enable_mmio(pioaddr, rp->quirks);
+#endif
+
+ /* Turn off EEPROM-controlled wake-up (magic packet) */
+ if (rp->quirks & rqWOL)
+ iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA);
+
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void rhine_poll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ rhine_interrupt(dev->irq, (void *)dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int rhine_napipoll(struct napi_struct *napi, int budget)
+{
+ struct rhine_private *rp = container_of(napi, struct rhine_private, napi);
+ struct net_device *dev = rp->dev;
+ void __iomem *ioaddr = rp->base;
+ int work_done;
+
+ work_done = rhine_rx(dev, budget);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+ }
+ return work_done;
+}
+
+static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ /* Reset the chip to erase previous misconfiguration. */
+ rhine_chip_reset(dev);
+
+ /* Rhine-I needs extra time to recuperate before EEPROM reload */
+ if (rp->quirks & rqRhineI)
+ msleep(5);
+
+ /* Reload EEPROM controlled bytes cleared by soft reset */
+ rhine_reload_eeprom(pioaddr, dev);
+}
+
+static const struct net_device_ops rhine_netdev_ops = {
+ .ndo_open = rhine_open,
+ .ndo_stop = rhine_close,
+ .ndo_start_xmit = rhine_start_tx,
+ .ndo_get_stats = rhine_get_stats,
+ .ndo_set_rx_mode = rhine_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rhine_tx_timeout,
+ .ndo_vlan_rx_add_vid = rhine_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = rhine_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rhine_poll,
+#endif
+};
+
+static int __devinit rhine_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *dev;
+ struct rhine_private *rp;
+ int i, rc;
+ u32 quirks;
+ long pioaddr;
+ long memaddr;
+ void __iomem *ioaddr;
+ int io_size, phy_id;
+ const char *name;
+#ifdef USE_MMIO
+ int bar = 1;
+#else
+ int bar = 0;
+#endif
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+ pr_info_once("%s\n", version);
+#endif
+
+ io_size = 256;
+ phy_id = 0;
+ quirks = 0;
+ name = "Rhine";
+ if (pdev->revision < VTunknown0) {
+ quirks = rqRhineI;
+ io_size = 128;
+ }
+ else if (pdev->revision >= VT6102) {
+ quirks = rqWOL | rqForceReset;
+ if (pdev->revision < VT6105) {
+ name = "Rhine II";
+ quirks |= rqStatusWBRace; /* Rhine-II exclusive */
+ }
+ else {
+ phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
+ if (pdev->revision >= VT6105_B0)
+ quirks |= rq6patterns;
+ if (pdev->revision < VT6105M)
+ name = "Rhine III";
+ else
+ name = "Rhine III (Management Adapter)";
+ }
+ }
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out;
+
+ /* this should always be supported */
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_err(&pdev->dev,
+ "32-bit PCI DMA addresses not supported by the card!?\n");
+ goto err_out;
+ }
+
+ /* sanity check */
+ if ((pci_resource_len(pdev, 0) < io_size) ||
+ (pci_resource_len(pdev, 1) < io_size)) {
+ rc = -EIO;
+ dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n");
+ goto err_out;
+ }
+
+ pioaddr = pci_resource_start(pdev, 0);
+ memaddr = pci_resource_start(pdev, 1);
+
+ pci_set_master(pdev);
+
+ dev = alloc_etherdev(sizeof(struct rhine_private));
+ if (!dev) {
+ rc = -ENOMEM;
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
+ goto err_out;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ rp = netdev_priv(dev);
+ rp->dev = dev;
+ rp->quirks = quirks;
+ rp->pioaddr = pioaddr;
+ rp->pdev = pdev;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_free_netdev;
+
+ ioaddr = pci_iomap(pdev, bar, io_size);
+ if (!ioaddr) {
+ rc = -EIO;
+ dev_err(&pdev->dev,
+ "ioremap failed for device %s, region 0x%X @ 0x%lX\n",
+ pci_name(pdev), io_size, memaddr);
+ goto err_out_free_res;
+ }
+
+#ifdef USE_MMIO
+ enable_mmio(pioaddr, quirks);
+
+ /* Check that selected MMIO registers match the PIO ones */
+ i = 0;
+ while (mmio_verify_registers[i]) {
+ int reg = mmio_verify_registers[i++];
+ unsigned char a = inb(pioaddr+reg);
+ unsigned char b = readb(ioaddr+reg);
+ if (a != b) {
+ rc = -EIO;
+ dev_err(&pdev->dev,
+ "MMIO do not match PIO [%02x] (%02x != %02x)\n",
+ reg, a, b);
+ goto err_out_unmap;
+ }
+ }
+#endif /* USE_MMIO */
+
+ dev->base_addr = (unsigned long)ioaddr;
+ rp->base = ioaddr;
+
+ /* Get chip registers into a sane state */
+ rhine_power_init(dev);
+ rhine_hw_init(dev, pioaddr);
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i);
+
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ /* Report it and use a random ethernet address instead */
+ netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr);
+ random_ether_addr(dev->dev_addr);
+ netdev_info(dev, "Using random MAC address: %pM\n",
+ dev->dev_addr);
+ }
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ /* For Rhine-I/II, phy_id is loaded from EEPROM */
+ if (!phy_id)
+ phy_id = ioread8(ioaddr + 0x6C);
+
+ dev->irq = pdev->irq;
+
+ spin_lock_init(&rp->lock);
+ INIT_WORK(&rp->reset_task, rhine_reset_task);
+
+ rp->mii_if.dev = dev;
+ rp->mii_if.mdio_read = mdio_read;
+ rp->mii_if.mdio_write = mdio_write;
+ rp->mii_if.phy_id_mask = 0x1f;
+ rp->mii_if.reg_num_mask = 0x1f;
+
+ /* The chip-specific entries in the device structure. */
+ dev->netdev_ops = &rhine_netdev_ops;
+ dev->ethtool_ops = &netdev_ethtool_ops,
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
+
+ if (rp->quirks & rqRhineI)
+ dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
+
+ if (pdev->revision >= VT6105M)
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ /* dev->name not defined before register_netdev()! */
+ rc = register_netdev(dev);
+ if (rc)
+ goto err_out_unmap;
+
+ netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n",
+ name,
+#ifdef USE_MMIO
+ memaddr,
+#else
+ (long)ioaddr,
+#endif
+ dev->dev_addr, pdev->irq);
+
+ pci_set_drvdata(pdev, dev);
+
+ {
+ u16 mii_cmd;
+ int mii_status = mdio_read(dev, phy_id, 1);
+ mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE;
+ mdio_write(dev, phy_id, MII_BMCR, mii_cmd);
+ if (mii_status != 0xffff && mii_status != 0x0000) {
+ rp->mii_if.advertising = mdio_read(dev, phy_id, 4);
+ netdev_info(dev,
+ "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n",
+ phy_id,
+ mii_status, rp->mii_if.advertising,
+ mdio_read(dev, phy_id, 5));
+
+ /* set IFF_RUNNING */
+ if (mii_status & BMSR_LSTATUS)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+
+ }
+ }
+ rp->mii_if.phy_id = phy_id;
+ if (debug > 1 && avoid_D3)
+ netdev_info(dev, "No D3 power state at shutdown\n");
+
+ return 0;
+
+err_out_unmap:
+ pci_iounmap(pdev, ioaddr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_free_netdev:
+ free_netdev(dev);
+err_out:
+ return rc;
+}
+
+static int alloc_ring(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void *ring;
+ dma_addr_t ring_dma;
+
+ ring = pci_alloc_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ &ring_dma);
+ if (!ring) {
+ netdev_err(dev, "Could not allocate DMA memory\n");
+ return -ENOMEM;
+ }
+ if (rp->quirks & rqRhineI) {
+ rp->tx_bufs = pci_alloc_consistent(rp->pdev,
+ PKT_BUF_SZ * TX_RING_SIZE,
+ &rp->tx_bufs_dma);
+ if (rp->tx_bufs == NULL) {
+ pci_free_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ ring, ring_dma);
+ return -ENOMEM;
+ }
+ }
+
+ rp->rx_ring = ring;
+ rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc);
+ rp->rx_ring_dma = ring_dma;
+ rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc);
+
+ return 0;
+}
+
+static void free_ring(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ pci_free_consistent(rp->pdev,
+ RX_RING_SIZE * sizeof(struct rx_desc) +
+ TX_RING_SIZE * sizeof(struct tx_desc),
+ rp->rx_ring, rp->rx_ring_dma);
+ rp->tx_ring = NULL;
+
+ if (rp->tx_bufs)
+ pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE,
+ rp->tx_bufs, rp->tx_bufs_dma);
+
+ rp->tx_bufs = NULL;
+
+}
+
+static void alloc_rbufs(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ dma_addr_t next;
+ int i;
+
+ rp->dirty_rx = rp->cur_rx = 0;
+
+ rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
+ rp->rx_head_desc = &rp->rx_ring[0];
+ next = rp->rx_ring_dma;
+
+ /* Init the ring entries */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rp->rx_ring[i].rx_status = 0;
+ rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz);
+ next += sizeof(struct rx_desc);
+ rp->rx_ring[i].next_desc = cpu_to_le32(next);
+ rp->rx_skbuff[i] = NULL;
+ }
+ /* Mark the last entry as wrapping the ring. */
+ rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma);
+
+ /* Fill in the Rx buffers. Handle allocation failure gracefully. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+ rp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break;
+ skb->dev = dev; /* Mark as being used by this device. */
+
+ rp->rx_skbuff_dma[i] =
+ pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]);
+ rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn);
+ }
+ rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
+}
+
+static void free_rbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int i;
+
+ /* Free all the skbuffs in the Rx queue. */
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rp->rx_ring[i].rx_status = 0;
+ rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+ if (rp->rx_skbuff[i]) {
+ pci_unmap_single(rp->pdev,
+ rp->rx_skbuff_dma[i],
+ rp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rp->rx_skbuff[i]);
+ }
+ rp->rx_skbuff[i] = NULL;
+ }
+}
+
+static void alloc_tbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ dma_addr_t next;
+ int i;
+
+ rp->dirty_tx = rp->cur_tx = 0;
+ next = rp->tx_ring_dma;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ rp->tx_skbuff[i] = NULL;
+ rp->tx_ring[i].tx_status = 0;
+ rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+ next += sizeof(struct tx_desc);
+ rp->tx_ring[i].next_desc = cpu_to_le32(next);
+ if (rp->quirks & rqRhineI)
+ rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
+ }
+ rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
+
+}
+
+static void free_tbufs(struct net_device* dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ rp->tx_ring[i].tx_status = 0;
+ rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
+ rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+ if (rp->tx_skbuff[i]) {
+ if (rp->tx_skbuff_dma[i]) {
+ pci_unmap_single(rp->pdev,
+ rp->tx_skbuff_dma[i],
+ rp->tx_skbuff[i]->len,
+ PCI_DMA_TODEVICE);
+ }
+ dev_kfree_skb(rp->tx_skbuff[i]);
+ }
+ rp->tx_skbuff[i] = NULL;
+ rp->tx_buf[i] = NULL;
+ }
+}
+
+static void rhine_check_media(struct net_device *dev, unsigned int init_media)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ mii_check_media(&rp->mii_if, debug, init_media);
+
+ if (rp->mii_if.full_duplex)
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex,
+ ioaddr + ChipCmd1);
+ else
+ iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex,
+ ioaddr + ChipCmd1);
+ if (debug > 1)
+ netdev_info(dev, "force_media %d, carrier %d\n",
+ rp->mii_if.force_media, netif_carrier_ok(dev));
+}
+
+/* Called after status of force_media possibly changed */
+static void rhine_set_carrier(struct mii_if_info *mii)
+{
+ if (mii->force_media) {
+ /* autoneg is off: Link is always assumed to be up */
+ if (!netif_carrier_ok(mii->dev))
+ netif_carrier_on(mii->dev);
+ }
+ else /* Let MMI library update carrier status */
+ rhine_check_media(mii->dev, 0);
+ if (debug > 1)
+ netdev_info(mii->dev, "force_media %d, carrier %d\n",
+ mii->force_media, netif_carrier_ok(mii->dev));
+}
+
+/**
+ * rhine_set_cam - set CAM multicast filters
+ * @ioaddr: register block of this Rhine
+ * @idx: multicast CAM index [0..MCAM_SIZE-1]
+ * @addr: multicast address (6 bytes)
+ *
+ * Load addresses into multicast filters.
+ */
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+ int i;
+
+ iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+ wmb();
+
+ /* Paranoid -- idx out of range should never happen */
+ idx &= (MCAM_SIZE - 1);
+
+ iowrite8((u8) idx, ioaddr + CamAddr);
+
+ for (i = 0; i < 6; i++, addr++)
+ iowrite8(*addr, ioaddr + MulticastFilter0 + i);
+ udelay(10);
+ wmb();
+
+ iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+ udelay(10);
+
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam - set CAM VLAN filters
+ * @ioaddr: register block of this Rhine
+ * @idx: VLAN CAM index [0..VCAM_SIZE-1]
+ * @addr: VLAN ID (2 bytes)
+ *
+ * Load addresses into VLAN filters.
+ */
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+ iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+ wmb();
+
+ /* Paranoid -- idx out of range should never happen */
+ idx &= (VCAM_SIZE - 1);
+
+ iowrite8((u8) idx, ioaddr + CamAddr);
+
+ iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6);
+ udelay(10);
+ wmb();
+
+ iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+ udelay(10);
+
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_cam_mask - set multicast CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: multicast CAM mask
+ *
+ * Mask sets multicast filters active/inactive.
+ */
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+ iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+ wmb();
+
+ /* write mask */
+ iowrite32(mask, ioaddr + CamMask);
+
+ /* disable CAMEN */
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam_mask - set VLAN CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: VLAN CAM mask
+ *
+ * Mask sets VLAN filters active/inactive.
+ */
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+ iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+ wmb();
+
+ /* write mask */
+ iowrite32(mask, ioaddr + CamMask);
+
+ /* disable CAMEN */
+ iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_init_cam_filter - initialize CAM filters
+ * @dev: network device
+ *
+ * Initialize (disable) hardware VLAN and multicast support on this
+ * Rhine.
+ */
+static void rhine_init_cam_filter(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ /* Disable all CAMs */
+ rhine_set_vlan_cam_mask(ioaddr, 0);
+ rhine_set_cam_mask(ioaddr, 0);
+
+ /* disable hardware VLAN support */
+ BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig);
+ BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+}
+
+/**
+ * rhine_update_vcam - update VLAN CAM filters
+ * @rp: rhine_private data of this Rhine
+ *
+ * Update VLAN CAM filters to match configuration change.
+ */
+static void rhine_update_vcam(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u16 vid;
+ u32 vCAMmask = 0; /* 32 vCAMs (6105M and better) */
+ unsigned int i = 0;
+
+ for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) {
+ rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid);
+ vCAMmask |= 1 << i;
+ if (++i >= VCAM_SIZE)
+ break;
+ }
+ rhine_set_vlan_cam_mask(ioaddr, vCAMmask);
+}
+
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ spin_lock_irq(&rp->lock);
+ set_bit(vid, rp->active_vlans);
+ rhine_update_vcam(dev);
+ spin_unlock_irq(&rp->lock);
+}
+
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ spin_lock_irq(&rp->lock);
+ clear_bit(vid, rp->active_vlans);
+ rhine_update_vcam(dev);
+ spin_unlock_irq(&rp->lock);
+}
+
+static void init_registers(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int i;
+
+ for (i = 0; i < 6; i++)
+ iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i);
+
+ /* Initialize other registers. */
+ iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */
+ /* Configure initial FIFO thresholds. */
+ iowrite8(0x20, ioaddr + TxConfig);
+ rp->tx_thresh = 0x20;
+ rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */
+
+ iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr);
+ iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr);
+
+ rhine_set_rx_mode(dev);
+
+ if (rp->pdev->revision >= VT6105M)
+ rhine_init_cam_filter(dev);
+
+ napi_enable(&rp->napi);
+
+ /* Enable interrupts by setting the interrupt mask. */
+ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
+ IntrRxDropped | IntrRxNoBuf | IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+
+ iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8),
+ ioaddr + ChipCmd);
+ rhine_check_media(dev, 1);
+}
+
+/* Enable MII link status auto-polling (required for IntrLinkChange) */
+static void rhine_enable_linkmon(void __iomem *ioaddr)
+{
+ iowrite8(0, ioaddr + MIICmd);
+ iowrite8(MII_BMSR, ioaddr + MIIRegAddr);
+ iowrite8(0x80, ioaddr + MIICmd);
+
+ RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20));
+
+ iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr);
+}
+
+/* Disable MII link status auto-polling (required for MDIO access) */
+static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
+{
+ iowrite8(0, ioaddr + MIICmd);
+
+ if (quirks & rqRhineI) {
+ iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR
+
+ /* Can be called from ISR. Evil. */
+ mdelay(1);
+
+ /* 0x80 must be set immediately before turning it off */
+ iowrite8(0x80, ioaddr + MIICmd);
+
+ RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20);
+
+ /* Heh. Now clear 0x80 again. */
+ iowrite8(0, ioaddr + MIICmd);
+ }
+ else
+ RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80);
+}
+
+/* Read and write over the MII Management Data I/O (MDIO) interface. */
+
+static int mdio_read(struct net_device *dev, int phy_id, int regnum)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int result;
+
+ rhine_disable_linkmon(ioaddr, rp->quirks);
+
+ /* rhine_disable_linkmon already cleared MIICmd */
+ iowrite8(phy_id, ioaddr + MIIPhyAddr);
+ iowrite8(regnum, ioaddr + MIIRegAddr);
+ iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40));
+ result = ioread16(ioaddr + MIIData);
+
+ rhine_enable_linkmon(ioaddr);
+ return result;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ rhine_disable_linkmon(ioaddr, rp->quirks);
+
+ /* rhine_disable_linkmon already cleared MIICmd */
+ iowrite8(phy_id, ioaddr + MIIPhyAddr);
+ iowrite8(regnum, ioaddr + MIIRegAddr);
+ iowrite16(value, ioaddr + MIIData);
+ iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20));
+
+ rhine_enable_linkmon(ioaddr);
+}
+
+static int rhine_open(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int rc;
+
+ rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name,
+ dev);
+ if (rc)
+ return rc;
+
+ if (debug > 1)
+ netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq);
+
+ rc = alloc_ring(dev);
+ if (rc) {
+ free_irq(rp->pdev->irq, dev);
+ return rc;
+ }
+ alloc_rbufs(dev);
+ alloc_tbufs(dev);
+ rhine_chip_reset(dev);
+ init_registers(dev);
+ if (debug > 2)
+ netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n",
+ __func__, ioread16(ioaddr + ChipCmd),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static void rhine_reset_task(struct work_struct *work)
+{
+ struct rhine_private *rp = container_of(work, struct rhine_private,
+ reset_task);
+ struct net_device *dev = rp->dev;
+
+ /* protect against concurrent rx interrupts */
+ disable_irq(rp->pdev->irq);
+
+ napi_disable(&rp->napi);
+
+ spin_lock_bh(&rp->lock);
+
+ /* clear all descriptors */
+ free_tbufs(dev);
+ free_rbufs(dev);
+ alloc_tbufs(dev);
+ alloc_rbufs(dev);
+
+ /* Reinitialize the hardware. */
+ rhine_chip_reset(dev);
+ init_registers(dev);
+
+ spin_unlock_bh(&rp->lock);
+ enable_irq(rp->pdev->irq);
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ dev->stats.tx_errors++;
+ netif_wake_queue(dev);
+}
+
+static void rhine_tx_timeout(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n",
+ ioread16(ioaddr + IntrStatus),
+ mdio_read(dev, rp->mii_if.phy_id, MII_BMSR));
+
+ schedule_work(&rp->reset_task);
+}
+
+static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ unsigned entry;
+ unsigned long flags;
+
+ /* Caution: the write order is important here, set the field
+ with the "ownership" bits last. */
+
+ /* Calculate the next Tx descriptor entry. */
+ entry = rp->cur_tx % TX_RING_SIZE;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+
+ rp->tx_skbuff[entry] = skb;
+
+ if ((rp->quirks & rqRhineI) &&
+ (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) {
+ /* Must use alignment buffer. */
+ if (skb->len > PKT_BUF_SZ) {
+ /* packet too long, drop it */
+ dev_kfree_skb(skb);
+ rp->tx_skbuff[entry] = NULL;
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ /* Padding is not copied and so must be redone. */
+ skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+ if (skb->len < ETH_ZLEN)
+ memset(rp->tx_buf[entry] + skb->len, 0,
+ ETH_ZLEN - skb->len);
+ rp->tx_skbuff_dma[entry] = 0;
+ rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
+ (rp->tx_buf[entry] -
+ rp->tx_bufs));
+ } else {
+ rp->tx_skbuff_dma[entry] =
+ pci_map_single(rp->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]);
+ }
+
+ rp->tx_ring[entry].desc_length =
+ cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+
+ if (unlikely(vlan_tx_tag_present(skb))) {
+ rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16);
+ /* request tagging */
+ rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000);
+ }
+ else
+ rp->tx_ring[entry].tx_status = 0;
+
+ /* lock eth irq */
+ spin_lock_irqsave(&rp->lock, flags);
+ wmb();
+ rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
+ wmb();
+
+ rp->cur_tx++;
+
+ /* Non-x86 Todo: explicitly flush cache lines here. */
+
+ if (vlan_tx_tag_present(skb))
+ /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+ BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+ /* Wake the potentially-idle transmit channel */
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+ ioaddr + ChipCmd1);
+ IOSYNC;
+
+ if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN)
+ netif_stop_queue(dev);
+
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ if (debug > 4) {
+ netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n",
+ rp->cur_tx-1, entry);
+ }
+ return NETDEV_TX_OK;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 intr_status;
+ int boguscnt = max_interrupt_work;
+ int handled = 0;
+
+ while ((intr_status = get_intr_status(dev))) {
+ handled = 1;
+
+ /* Acknowledge all of the current interrupt sources ASAP. */
+ if (intr_status & IntrTxDescRace)
+ iowrite8(0x08, ioaddr + IntrStatus2);
+ iowrite16(intr_status & 0xffff, ioaddr + IntrStatus);
+ IOSYNC;
+
+ if (debug > 4)
+ netdev_dbg(dev, "Interrupt, status %08x\n",
+ intr_status);
+
+ if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
+ IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
+ iowrite16(IntrTxAborted |
+ IntrTxDone | IntrTxError | IntrTxUnderrun |
+ IntrPCIErr | IntrStatsMax | IntrLinkChange,
+ ioaddr + IntrEnable);
+
+ napi_schedule(&rp->napi);
+ }
+
+ if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
+ if (intr_status & IntrTxErrSummary) {
+ /* Avoid scavenging before Tx engine turned off */
+ RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn));
+ if (debug > 2 &&
+ ioread8(ioaddr+ChipCmd) & CmdTxOn)
+ netdev_warn(dev,
+ "%s: Tx engine still on\n",
+ __func__);
+ }
+ rhine_tx(dev);
+ }
+
+ /* Abnormal error summary/uncommon events handlers. */
+ if (intr_status & (IntrPCIErr | IntrLinkChange |
+ IntrStatsMax | IntrTxError | IntrTxAborted |
+ IntrTxUnderrun | IntrTxDescRace))
+ rhine_error(dev, intr_status);
+
+ if (--boguscnt < 0) {
+ netdev_warn(dev, "Too much work at interrupt, status=%#08x\n",
+ intr_status);
+ break;
+ }
+ }
+
+ if (debug > 3)
+ netdev_dbg(dev, "exiting interrupt, status=%08x\n",
+ ioread16(ioaddr + IntrStatus));
+ return IRQ_RETVAL(handled);
+}
+
+/* This routine is logically part of the interrupt handler, but isolated
+ for clarity. */
+static void rhine_tx(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
+
+ spin_lock(&rp->lock);
+
+ /* find and cleanup dirty tx descriptors */
+ while (rp->dirty_tx != rp->cur_tx) {
+ txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status);
+ if (debug > 6)
+ netdev_dbg(dev, "Tx scavenge %d status %08x\n",
+ entry, txstatus);
+ if (txstatus & DescOwn)
+ break;
+ if (txstatus & 0x8000) {
+ if (debug > 1)
+ netdev_dbg(dev, "Transmit error, Tx status %08x\n",
+ txstatus);
+ dev->stats.tx_errors++;
+ if (txstatus & 0x0400)
+ dev->stats.tx_carrier_errors++;
+ if (txstatus & 0x0200)
+ dev->stats.tx_window_errors++;
+ if (txstatus & 0x0100)
+ dev->stats.tx_aborted_errors++;
+ if (txstatus & 0x0080)
+ dev->stats.tx_heartbeat_errors++;
+ if (((rp->quirks & rqRhineI) && txstatus & 0x0002) ||
+ (txstatus & 0x0800) || (txstatus & 0x1000)) {
+ dev->stats.tx_fifo_errors++;
+ rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+ break; /* Keep the skb - we try again */
+ }
+ /* Transmitter restarted in 'abnormal' handler. */
+ } else {
+ if (rp->quirks & rqRhineI)
+ dev->stats.collisions += (txstatus >> 3) & 0x0F;
+ else
+ dev->stats.collisions += txstatus & 0x0F;
+ if (debug > 6)
+ netdev_dbg(dev, "collisions: %1.1x:%1.1x\n",
+ (txstatus >> 3) & 0xF,
+ txstatus & 0xF);
+ dev->stats.tx_bytes += rp->tx_skbuff[entry]->len;
+ dev->stats.tx_packets++;
+ }
+ /* Free the original skb. */
+ if (rp->tx_skbuff_dma[entry]) {
+ pci_unmap_single(rp->pdev,
+ rp->tx_skbuff_dma[entry],
+ rp->tx_skbuff[entry]->len,
+ PCI_DMA_TODEVICE);
+ }
+ dev_kfree_skb_irq(rp->tx_skbuff[entry]);
+ rp->tx_skbuff[entry] = NULL;
+ entry = (++rp->dirty_tx) % TX_RING_SIZE;
+ }
+ if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
+ netif_wake_queue(dev);
+
+ spin_unlock(&rp->lock);
+}
+
+/**
+ * rhine_get_vlan_tci - extract TCI from Rx data buffer
+ * @skb: pointer to sk_buff
+ * @data_size: used data area of the buffer including CRC
+ *
+ * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
+ * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
+ * aligned following the CRC.
+ */
+static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
+{
+ u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
+ return be16_to_cpup((__be16 *)trailer);
+}
+
+/* Process up to limit frames from receive ring */
+static int rhine_rx(struct net_device *dev, int limit)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int count;
+ int entry = rp->cur_rx % RX_RING_SIZE;
+
+ if (debug > 4) {
+ netdev_dbg(dev, "%s(), entry %d status %08x\n",
+ __func__, entry,
+ le32_to_cpu(rp->rx_head_desc->rx_status));
+ }
+
+ /* If EOP is set on the next entry, it's a new packet. Send it up. */
+ for (count = 0; count < limit; ++count) {
+ struct rx_desc *desc = rp->rx_head_desc;
+ u32 desc_status = le32_to_cpu(desc->rx_status);
+ u32 desc_length = le32_to_cpu(desc->desc_length);
+ int data_size = desc_status >> 16;
+
+ if (desc_status & DescOwn)
+ break;
+
+ if (debug > 4)
+ netdev_dbg(dev, "%s() status is %08x\n",
+ __func__, desc_status);
+
+ if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) {
+ if ((desc_status & RxWholePkt) != RxWholePkt) {
+ netdev_warn(dev,
+ "Oversized Ethernet frame spanned multiple buffers, "
+ "entry %#x length %d status %08x!\n",
+ entry, data_size,
+ desc_status);
+ netdev_warn(dev,
+ "Oversized Ethernet frame %p vs %p\n",
+ rp->rx_head_desc,
+ &rp->rx_ring[entry]);
+ dev->stats.rx_length_errors++;
+ } else if (desc_status & RxErr) {
+ /* There was a error. */
+ if (debug > 2)
+ netdev_dbg(dev, "%s() Rx error was %08x\n",
+ __func__, desc_status);
+ dev->stats.rx_errors++;
+ if (desc_status & 0x0030)
+ dev->stats.rx_length_errors++;
+ if (desc_status & 0x0048)
+ dev->stats.rx_fifo_errors++;
+ if (desc_status & 0x0004)
+ dev->stats.rx_frame_errors++;
+ if (desc_status & 0x0002) {
+ /* this can also be updated outside the interrupt handler */
+ spin_lock(&rp->lock);
+ dev->stats.rx_crc_errors++;
+ spin_unlock(&rp->lock);
+ }
+ }
+ } else {
+ struct sk_buff *skb = NULL;
+ /* Length should omit the CRC */
+ int pkt_len = data_size - 4;
+ u16 vlan_tci = 0;
+
+ /* Check if the packet is long enough to accept without
+ copying to a minimally-sized skbuff. */
+ if (pkt_len < rx_copybreak)
+ skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+ if (skb) {
+ pci_dma_sync_single_for_cpu(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+
+ skb_copy_to_linear_data(skb,
+ rp->rx_skbuff[entry]->data,
+ pkt_len);
+ skb_put(skb, pkt_len);
+ pci_dma_sync_single_for_device(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ } else {
+ skb = rp->rx_skbuff[entry];
+ if (skb == NULL) {
+ netdev_err(dev, "Inconsistent Rx descriptor chain\n");
+ break;
+ }
+ rp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ pci_unmap_single(rp->pdev,
+ rp->rx_skbuff_dma[entry],
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (unlikely(desc_length & DescTag))
+ vlan_tci = rhine_get_vlan_tci(skb, data_size);
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ if (unlikely(desc_length & DescTag))
+ __vlan_hwaccel_put_tag(skb, vlan_tci);
+ netif_receive_skb(skb);
+ dev->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ }
+ entry = (++rp->cur_rx) % RX_RING_SIZE;
+ rp->rx_head_desc = &rp->rx_ring[entry];
+ }
+
+ /* Refill the Rx ring buffers. */
+ for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) {
+ struct sk_buff *skb;
+ entry = rp->dirty_rx % RX_RING_SIZE;
+ if (rp->rx_skbuff[entry] == NULL) {
+ skb = netdev_alloc_skb(dev, rp->rx_buf_sz);
+ rp->rx_skbuff[entry] = skb;
+ if (skb == NULL)
+ break; /* Better luck next round. */
+ skb->dev = dev; /* Mark as being used by this device. */
+ rp->rx_skbuff_dma[entry] =
+ pci_map_single(rp->pdev, skb->data,
+ rp->rx_buf_sz,
+ PCI_DMA_FROMDEVICE);
+ rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]);
+ }
+ rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn);
+ }
+
+ return count;
+}
+
+/*
+ * Clears the "tally counters" for CRC errors and missed frames(?).
+ * It has been reported that some chips need a write of 0 to clear
+ * these, for others the counters are set to 1 when written to and
+ * instead cleared when read. So we clear them both ways ...
+ */
+static inline void clear_tally_counters(void __iomem *ioaddr)
+{
+ iowrite32(0, ioaddr + RxMissed);
+ ioread16(ioaddr + RxCRCErrs);
+ ioread16(ioaddr + RxMissed);
+}
+
+static void rhine_restart_tx(struct net_device *dev) {
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ int entry = rp->dirty_tx % TX_RING_SIZE;
+ u32 intr_status;
+
+ /*
+ * If new errors occurred, we need to sort them out before doing Tx.
+ * In that case the ISR will be back here RSN anyway.
+ */
+ intr_status = get_intr_status(dev);
+
+ if ((intr_status & IntrTxErrSummary) == 0) {
+
+ /* We know better than the chip where it should continue. */
+ iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc),
+ ioaddr + TxRingPtr);
+
+ iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
+ ioaddr + ChipCmd);
+
+ if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000))
+ /* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+ BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
+ iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
+ ioaddr + ChipCmd1);
+ IOSYNC;
+ }
+ else {
+ /* This should never happen */
+ if (debug > 1)
+ netdev_warn(dev, "%s() Another error occurred %08x\n",
+ __func__, intr_status);
+ }
+
+}
+
+static void rhine_error(struct net_device *dev, int intr_status)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ spin_lock(&rp->lock);
+
+ if (intr_status & IntrLinkChange)
+ rhine_check_media(dev, 0);
+ if (intr_status & IntrStatsMax) {
+ dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+ dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+ clear_tally_counters(ioaddr);
+ }
+ if (intr_status & IntrTxAborted) {
+ if (debug > 1)
+ netdev_info(dev, "Abort %08x, frame dropped\n",
+ intr_status);
+ }
+ if (intr_status & IntrTxUnderrun) {
+ if (rp->tx_thresh < 0xE0)
+ BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
+ if (debug > 1)
+ netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n",
+ rp->tx_thresh);
+ }
+ if (intr_status & IntrTxDescRace) {
+ if (debug > 2)
+ netdev_info(dev, "Tx descriptor write-back race\n");
+ }
+ if ((intr_status & IntrTxError) &&
+ (intr_status & (IntrTxAborted |
+ IntrTxUnderrun | IntrTxDescRace)) == 0) {
+ if (rp->tx_thresh < 0xE0) {
+ BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
+ }
+ if (debug > 1)
+ netdev_info(dev, "Unspecified error. Tx threshold now %02x\n",
+ rp->tx_thresh);
+ }
+ if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace |
+ IntrTxError))
+ rhine_restart_tx(dev);
+
+ if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun |
+ IntrTxError | IntrTxAborted | IntrNormalSummary |
+ IntrTxDescRace)) {
+ if (debug > 1)
+ netdev_err(dev, "Something Wicked happened! %08x\n",
+ intr_status);
+ }
+
+ spin_unlock(&rp->lock);
+}
+
+static struct net_device_stats *rhine_get_stats(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rp->lock, flags);
+ dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
+ dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
+ clear_tally_counters(ioaddr);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ return &dev->stats;
+}
+
+static void rhine_set_rx_mode(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+ u32 mc_filter[2]; /* Multicast hash filter */
+ u8 rx_mode = 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */
+ struct netdev_hw_addr *ha;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ rx_mode = 0x1C;
+ iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+ iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to match, or accept all multicasts. */
+ iowrite32(0xffffffff, ioaddr + MulticastFilter0);
+ iowrite32(0xffffffff, ioaddr + MulticastFilter1);
+ } else if (rp->pdev->revision >= VT6105M) {
+ int i = 0;
+ u32 mCAMmask = 0; /* 32 mCAMs (6105M and better) */
+ netdev_for_each_mc_addr(ha, dev) {
+ if (i == MCAM_SIZE)
+ break;
+ rhine_set_cam(ioaddr, i, ha->addr);
+ mCAMmask |= 1 << i;
+ i++;
+ }
+ rhine_set_cam_mask(ioaddr, mCAMmask);
+ } else {
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
+ iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
+ }
+ /* enable/disable VLAN receive filtering */
+ if (rp->pdev->revision >= VT6105M) {
+ if (dev->flags & IFF_PROMISC)
+ BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+ else
+ BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+ }
+ BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(rp->pdev));
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&rp->lock);
+ rc = mii_ethtool_gset(&rp->mii_if, cmd);
+ spin_unlock_irq(&rp->lock);
+
+ return rc;
+}
+
+static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ spin_lock_irq(&rp->lock);
+ rc = mii_ethtool_sset(&rp->mii_if, cmd);
+ spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
+
+ return rc;
+}
+
+static int netdev_nway_reset(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ return mii_nway_restart(&rp->mii_if);
+}
+
+static u32 netdev_get_link(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ return mii_link_ok(&rp->mii_if);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 value)
+{
+ debug = value;
+}
+
+static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+
+ if (!(rp->quirks & rqWOL))
+ return;
+
+ spin_lock_irq(&rp->lock);
+ wol->supported = WAKE_PHY | WAKE_MAGIC |
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
+ wol->wolopts = rp->wolopts;
+ spin_unlock_irq(&rp->lock);
+}
+
+static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ u32 support = WAKE_PHY | WAKE_MAGIC |
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */
+
+ if (!(rp->quirks & rqWOL))
+ return -EINVAL;
+
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ spin_lock_irq(&rp->lock);
+ rp->wolopts = wol->wolopts;
+ spin_unlock_irq(&rp->lock);
+
+ return 0;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_settings = netdev_get_settings,
+ .set_settings = netdev_set_settings,
+ .nway_reset = netdev_nway_reset,
+ .get_link = netdev_get_link,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+ .get_wol = rhine_get_wol,
+ .set_wol = rhine_set_wol,
+};
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ int rc;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ spin_lock_irq(&rp->lock);
+ rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&rp->lock);
+ rhine_set_carrier(&rp->mii_if);
+
+ return rc;
+}
+
+static int rhine_close(struct net_device *dev)
+{
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ napi_disable(&rp->napi);
+ cancel_work_sync(&rp->reset_task);
+ netif_stop_queue(dev);
+
+ spin_lock_irq(&rp->lock);
+
+ if (debug > 1)
+ netdev_dbg(dev, "Shutting down ethercard, status was %04x\n",
+ ioread16(ioaddr + ChipCmd));
+
+ /* Switch to loopback mode to avoid hardware races. */
+ iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig);
+
+ /* Disable interrupts by clearing the interrupt mask. */
+ iowrite16(0x0000, ioaddr + IntrEnable);
+
+ /* Stop the chip's Tx and Rx processes. */
+ iowrite16(CmdStop, ioaddr + ChipCmd);
+
+ spin_unlock_irq(&rp->lock);
+
+ free_irq(rp->pdev->irq, dev);
+ free_rbufs(dev);
+ free_tbufs(dev);
+ free_ring(dev);
+
+ return 0;
+}
+
+
+static void __devexit rhine_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+
+ unregister_netdev(dev);
+
+ pci_iounmap(pdev, rp->base);
+ pci_release_regions(pdev);
+
+ free_netdev(dev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static void rhine_shutdown (struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ void __iomem *ioaddr = rp->base;
+
+ if (!(rp->quirks & rqWOL))
+ return; /* Nothing to do for non-WOL adapters */
+
+ rhine_power_init(dev);
+
+ /* Make sure we use pattern 0, 1 and not 4, 5 */
+ if (rp->quirks & rq6patterns)
+ iowrite8(0x04, ioaddr + WOLcgClr);
+
+ if (rp->wolopts & WAKE_MAGIC) {
+ iowrite8(WOLmagic, ioaddr + WOLcrSet);
+ /*
+ * Turn EEPROM-controlled wake-up back on -- some hardware may
+ * not cooperate otherwise.
+ */
+ iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA);
+ }
+
+ if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST))
+ iowrite8(WOLbmcast, ioaddr + WOLcgSet);
+
+ if (rp->wolopts & WAKE_PHY)
+ iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet);
+
+ if (rp->wolopts & WAKE_UCAST)
+ iowrite8(WOLucast, ioaddr + WOLcrSet);
+
+ if (rp->wolopts) {
+ /* Enable legacy WOL (for old motherboards) */
+ iowrite8(0x01, ioaddr + PwcfgSet);
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW);
+ }
+
+ /* Hit power state D3 (sleep) */
+ if (!avoid_D3)
+ iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);
+
+ /* TODO: Check use of pci_enable_wake() */
+
+}
+
+#ifdef CONFIG_PM
+static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (!netif_running(dev))
+ return 0;
+
+ napi_disable(&rp->napi);
+
+ netif_device_detach(dev);
+ pci_save_state(pdev);
+
+ spin_lock_irqsave(&rp->lock, flags);
+ rhine_shutdown(pdev);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ free_irq(dev->irq, dev);
+ return 0;
+}
+
+static int rhine_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct rhine_private *rp = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ if (!netif_running(dev))
+ return 0;
+
+ if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
+ netdev_err(dev, "request_irq failed\n");
+
+ ret = pci_set_power_state(pdev, PCI_D0);
+ if (debug > 1)
+ netdev_info(dev, "Entering power state D0 %s (%d)\n",
+ ret ? "failed" : "succeeded", ret);
+
+ pci_restore_state(pdev);
+
+ spin_lock_irqsave(&rp->lock, flags);
+#ifdef USE_MMIO
+ enable_mmio(rp->pioaddr, rp->quirks);
+#endif
+ rhine_power_init(dev);
+ free_tbufs(dev);
+ free_rbufs(dev);
+ alloc_tbufs(dev);
+ alloc_rbufs(dev);
+ init_registers(dev);
+ spin_unlock_irqrestore(&rp->lock, flags);
+
+ netif_device_attach(dev);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver rhine_driver = {
+ .name = DRV_NAME,
+ .id_table = rhine_pci_tbl,
+ .probe = rhine_init_one,
+ .remove = __devexit_p(rhine_remove_one),
+#ifdef CONFIG_PM
+ .suspend = rhine_suspend,
+ .resume = rhine_resume,
+#endif /* CONFIG_PM */
+ .shutdown = rhine_shutdown,
+};
+
+static struct dmi_system_id __initdata rhine_dmi_table[] = {
+ {
+ .ident = "EPIA-M",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+ },
+ },
+ {
+ .ident = "KV7",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"),
+ },
+ },
+ { NULL }
+};
+
+static int __init rhine_init(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+ pr_info("%s\n", version);
+#endif
+ if (dmi_check_system(rhine_dmi_table)) {
+ /* these BIOSes fail at PXE boot if chip is in D3 */
+ avoid_D3 = 1;
+ pr_warn("Broken BIOS detected, avoid_D3 enabled\n");
+ }
+ else if (avoid_D3)
+ pr_info("avoid_D3 set\n");
+
+ return pci_register_driver(&rhine_driver);
+}
+
+
+static void __exit rhine_cleanup(void)
+{
+ pci_unregister_driver(&rhine_driver);
+}
+
+
+module_init(rhine_init);
+module_exit(rhine_cleanup);