summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xscale/ixp2000/pm3386.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp2000/pm3386.c')
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/pm3386.c351
1 files changed, 0 insertions, 351 deletions
diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c
deleted file mode 100644
index e08d3f9863b8..000000000000
--- a/drivers/net/ethernet/xscale/ixp2000/pm3386.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Helper functions for the PM3386s on the Radisys ENP2611
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <asm/io.h>
-#include "pm3386.h"
-
-/*
- * Read from register 'reg' of PM3386 device 'pm'.
- */
-static u16 pm3386_reg_read(int pm, int reg)
-{
- void *_reg;
- u16 value;
-
- _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
- if (pm == 1)
- _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
- value = *((volatile u16 *)(_reg + (reg << 1)));
-
-// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value);
-
- return value;
-}
-
-/*
- * Write to register 'reg' of PM3386 device 'pm', and perform
- * a readback from the identification register.
- */
-static void pm3386_reg_write(int pm, int reg, u16 value)
-{
- void *_reg;
- u16 dummy;
-
-// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value);
-
- _reg = (void *)ENP2611_PM3386_0_VIRT_BASE;
- if (pm == 1)
- _reg = (void *)ENP2611_PM3386_1_VIRT_BASE;
-
- *((volatile u16 *)(_reg + (reg << 1))) = value;
-
- dummy = *((volatile u16 *)_reg);
- __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Read from port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static u16 pm3386_port_reg_read(int port, int _reg, int spacing)
-{
- int reg;
-
- reg = _reg;
- if (port & 1)
- reg += spacing;
-
- return pm3386_reg_read(port >> 1, reg);
-}
-
-/*
- * Write to port 'port' register 'reg', where the registers
- * for the different ports are 'spacing' registers apart.
- */
-static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
-{
- int reg;
-
- reg = _reg;
- if (port & 1)
- reg += spacing;
-
- pm3386_reg_write(port >> 1, reg, value);
-}
-
-int pm3386_secondary_present(void)
-{
- return pm3386_reg_read(1, 0) == 0x3386;
-}
-
-void pm3386_reset(void)
-{
- u8 mac[3][6];
- int secondary;
-
- secondary = pm3386_secondary_present();
-
- /* Save programmed MAC addresses. */
- pm3386_get_mac(0, mac[0]);
- pm3386_get_mac(1, mac[1]);
- if (secondary)
- pm3386_get_mac(2, mac[2]);
-
- /* Assert analog and digital reset. */
- pm3386_reg_write(0, 0x002, 0x0060);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0060);
- mdelay(1);
-
- /* Deassert analog reset. */
- pm3386_reg_write(0, 0x002, 0x0062);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0062);
- mdelay(10);
-
- /* Deassert digital reset. */
- pm3386_reg_write(0, 0x002, 0x0063);
- if (secondary)
- pm3386_reg_write(1, 0x002, 0x0063);
- mdelay(10);
-
- /* Restore programmed MAC addresses. */
- pm3386_set_mac(0, mac[0]);
- pm3386_set_mac(1, mac[1]);
- if (secondary)
- pm3386_set_mac(2, mac[2]);
-
- /* Disable carrier on all ports. */
- pm3386_set_carrier(0, 0);
- pm3386_set_carrier(1, 0);
- if (secondary)
- pm3386_set_carrier(2, 0);
-}
-
-static u16 swaph(u16 x)
-{
- return ((x << 8) | (x >> 8)) & 0xffff;
-}
-
-int pm3386_port_count(void)
-{
- return 2 + pm3386_secondary_present();
-}
-
-void pm3386_init_port(int port)
-{
- int pm = port >> 1;
-
- /*
- * Work around ENP2611 bootloader programming MAC address
- * in reverse.
- */
- if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 &&
- (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) {
- u16 temp[3];
-
- temp[0] = pm3386_port_reg_read(port, 0x308, 0x100);
- temp[1] = pm3386_port_reg_read(port, 0x309, 0x100);
- temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100);
- pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2]));
- pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1]));
- pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0]));
- }
-
- /*
- * Initialise narrowbanding mode. See application note 2010486
- * for more information. (@@@ We also need to issue a reset
- * when ROOL or DOOL are detected.)
- */
- pm3386_port_reg_write(port, 0x708, 0x10, 0xd055);
- udelay(500);
- pm3386_port_reg_write(port, 0x708, 0x10, 0x5055);
-
- /*
- * SPI-3 ingress block. Set 64 bytes SPI-3 burst size
- * towards SPI-3 bridge.
- */
- pm3386_port_reg_write(port, 0x122, 0x20, 0x0002);
-
- /*
- * Enable ingress protocol checking, and soft reset the
- * SPI-3 ingress block.
- */
- pm3386_reg_write(pm, 0x103, 0x0003);
- while (!(pm3386_reg_read(pm, 0x103) & 0x80))
- ;
-
- /*
- * SPI-3 egress block. Gather 12288 bytes of the current
- * packet in the TX fifo before initiating transmit on the
- * SERDES interface. (Prevents TX underflows.)
- */
- pm3386_port_reg_write(port, 0x221, 0x20, 0x0007);
-
- /*
- * Enforce odd parity from the SPI-3 bridge, and soft reset
- * the SPI-3 egress block.
- */
- pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1)));
- while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c)
- ;
-
- /*
- * EGMAC block. Set this channels to reject long preambles,
- * not send or transmit PAUSE frames, enable preamble checking,
- * disable frame length checking, enable FCS appending, enable
- * TX frame padding.
- */
- pm3386_port_reg_write(port, 0x302, 0x100, 0x0113);
-
- /*
- * Soft reset the EGMAC block.
- */
- pm3386_port_reg_write(port, 0x301, 0x100, 0x8000);
- pm3386_port_reg_write(port, 0x301, 0x100, 0x0000);
-
- /*
- * Auto-sense autonegotiation status.
- */
- pm3386_port_reg_write(port, 0x306, 0x100, 0x0100);
-
- /*
- * Allow reception of jumbo frames.
- */
- pm3386_port_reg_write(port, 0x310, 0x100, 9018);
-
- /*
- * Allow transmission of jumbo frames.
- */
- pm3386_port_reg_write(port, 0x336, 0x100, 9018);
-
- /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */
-
- /*
- * Set autonegotiation parameters to 'no PAUSE, full duplex.'
- */
- pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020);
-
- /*
- * Enable and restart autonegotiation.
- */
- pm3386_port_reg_write(port, 0x318, 0x100, 0x0003);
- pm3386_port_reg_write(port, 0x318, 0x100, 0x0002);
-}
-
-void pm3386_get_mac(int port, u8 *mac)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x308, 0x100);
- mac[0] = temp & 0xff;
- mac[1] = (temp >> 8) & 0xff;
-
- temp = pm3386_port_reg_read(port, 0x309, 0x100);
- mac[2] = temp & 0xff;
- mac[3] = (temp >> 8) & 0xff;
-
- temp = pm3386_port_reg_read(port, 0x30a, 0x100);
- mac[4] = temp & 0xff;
- mac[5] = (temp >> 8) & 0xff;
-}
-
-void pm3386_set_mac(int port, u8 *mac)
-{
- pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]);
- pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]);
- pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]);
-}
-
-static u32 pm3386_get_stat(int port, u16 base)
-{
- u32 value;
-
- value = pm3386_port_reg_read(port, base, 0x100);
- value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16;
-
- return value;
-}
-
-void pm3386_get_stats(int port, struct net_device_stats *stats)
-{
- /*
- * Snapshot statistics counters.
- */
- pm3386_port_reg_write(port, 0x500, 0x100, 0x0001);
- while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001)
- ;
-
- memset(stats, 0, sizeof(*stats));
-
- stats->rx_packets = pm3386_get_stat(port, 0x510);
- stats->tx_packets = pm3386_get_stat(port, 0x590);
- stats->rx_bytes = pm3386_get_stat(port, 0x514);
- stats->tx_bytes = pm3386_get_stat(port, 0x594);
- /* @@@ Add other stats. */
-}
-
-void pm3386_set_carrier(int port, int state)
-{
- pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000);
-}
-
-int pm3386_is_link_up(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x31a, 0x100);
- temp = pm3386_port_reg_read(port, 0x31a, 0x100);
-
- return !!(temp & 0x0002);
-}
-
-void pm3386_enable_rx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp |= 0x1000;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_rx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp &= 0xefff;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_enable_tx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp |= 0x4000;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-void pm3386_disable_tx(int port)
-{
- u16 temp;
-
- temp = pm3386_port_reg_read(port, 0x303, 0x100);
- temp &= 0xbfff;
- pm3386_port_reg_write(port, 0x303, 0x100, temp);
-}
-
-MODULE_LICENSE("GPL");