diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
-rw-r--r-- | drivers/net/phy/phy_device.c | 228 |
1 files changed, 218 insertions, 10 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index adb66a2fae18..b13c52873ef5 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -27,6 +27,7 @@ #include <linux/bitmap.h> #include <linux/phy.h> #include <linux/phy_led_triggers.h> +#include <linux/sfp.h> #include <linux/mdio.h> #include <linux/io.h> #include <linux/uaccess.h> @@ -488,7 +489,7 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv) if (phydev->is_c45) { for (i = 1; i < num_ids; i++) { - if (!(phydev->c45_ids.devices_in_package & (1 << i))) + if (phydev->c45_ids.device_ids[i] == 0xffffffff) continue; if ((phydrv->phy_id & phydrv->phy_id_mask) == @@ -552,7 +553,7 @@ static const struct device_type mdio_bus_phy_type = { .pm = MDIO_BUS_PHY_PM_OPS, }; -static int phy_request_driver_module(struct phy_device *dev, int phy_id) +static int phy_request_driver_module(struct phy_device *dev, u32 phy_id) { int ret; @@ -564,15 +565,15 @@ static int phy_request_driver_module(struct phy_device *dev, int phy_id) * then modprobe isn't available. */ if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) { - phydev_err(dev, "error %d loading PHY driver module for ID 0x%08x\n", - ret, phy_id); + phydev_err(dev, "error %d loading PHY driver module for ID 0x%08lx\n", + ret, (unsigned long)phy_id); return ret; } return 0; } -struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids) { @@ -596,8 +597,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, mdiodev->device_free = phy_mdio_device_free; mdiodev->device_remove = phy_mdio_device_remove; - dev->speed = 0; - dev->duplex = -1; + dev->speed = SPEED_UNKNOWN; + dev->duplex = DUPLEX_UNKNOWN; dev->pause = 0; dev->asym_pause = 0; dev->link = 0; @@ -632,7 +633,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, int i; for (i = 1; i < num_ids; i++) { - if (!(c45_ids->devices_in_package & (1 << i))) + if (c45_ids->device_ids[i] == 0xffffffff) continue; ret = phy_request_driver_module(dev, @@ -812,10 +813,13 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, */ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { - struct phy_c45_device_ids c45_ids = {0}; + struct phy_c45_device_ids c45_ids; u32 phy_id = 0; int r; + c45_ids.devices_in_package = 0; + memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids)); + r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids); if (r) return ERR_PTR(r); @@ -1175,6 +1179,65 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(phy_standalone); /** + * phy_sfp_attach - attach the SFP bus to the PHY upstream network device + * @upstream: pointer to the phy device + * @bus: sfp bus representing cage being attached + * + * This is used to fill in the sfp_upstream_ops .attach member. + */ +void phy_sfp_attach(void *upstream, struct sfp_bus *bus) +{ + struct phy_device *phydev = upstream; + + if (phydev->attached_dev) + phydev->attached_dev->sfp_bus = bus; + phydev->sfp_bus_attached = true; +} +EXPORT_SYMBOL(phy_sfp_attach); + +/** + * phy_sfp_detach - detach the SFP bus from the PHY upstream network device + * @upstream: pointer to the phy device + * @bus: sfp bus representing cage being attached + * + * This is used to fill in the sfp_upstream_ops .detach member. + */ +void phy_sfp_detach(void *upstream, struct sfp_bus *bus) +{ + struct phy_device *phydev = upstream; + + if (phydev->attached_dev) + phydev->attached_dev->sfp_bus = NULL; + phydev->sfp_bus_attached = false; +} +EXPORT_SYMBOL(phy_sfp_detach); + +/** + * phy_sfp_probe - probe for a SFP cage attached to this PHY device + * @phydev: Pointer to phy_device + * @ops: SFP's upstream operations + */ +int phy_sfp_probe(struct phy_device *phydev, + const struct sfp_upstream_ops *ops) +{ + struct sfp_bus *bus; + int ret; + + if (phydev->mdio.dev.fwnode) { + bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode); + if (IS_ERR(bus)) + return PTR_ERR(bus); + + phydev->sfp_bus = bus; + + ret = sfp_bus_add_upstream(bus, phydev, ops); + sfp_bus_put(bus); + } + return 0; +} +EXPORT_SYMBOL(phy_sfp_probe); + +/** * phy_attach_direct - attach a network device to a given PHY device pointer * @dev: network device to attach * @phydev: Pointer to phy_device to attach @@ -1249,6 +1312,9 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (dev) { phydev->attached_dev = dev; dev->phydev = phydev; + + if (phydev->sfp_bus_attached) + dev->sfp_bus = phydev->sfp_bus; } /* Some Ethernet drivers try to connect to a PHY device before @@ -1270,7 +1336,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n"); } - phydev->dev_flags = flags; + phydev->dev_flags |= flags; phydev->interface = interface; @@ -1608,6 +1674,40 @@ static int genphy_config_advert(struct phy_device *phydev) } /** + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. This function is intended + * for Clause 37 1000Base-X mode. + */ +static int genphy_c37_config_advert(struct phy_device *phydev) +{ + u16 adv = 0; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + + return phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, + adv); +} + +/** * genphy_config_eee_advert - disable unwanted eee mode advertisement * @phydev: target phy_device struct * @@ -1716,6 +1816,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) EXPORT_SYMBOL(__genphy_config_aneg); /** + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. This function is intended + * for use with Clause 37 1000Base-X mode. + */ +int genphy_c37_config_aneg(struct phy_device *phydev) +{ + int err, changed; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, + BMCR_SPEED1000); + if (err) + return err; + + changed = genphy_c37_config_advert(phydev); + if (changed < 0) /* error */ + return changed; + + if (!changed) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + changed = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (changed > 0) + return genphy_restart_aneg(phydev); + + return 0; +} +EXPORT_SYMBOL(genphy_c37_config_aneg); + +/** * genphy_aneg_done - return auto-negotiation status * @phydev: target phy_device struct * @@ -1887,6 +2035,63 @@ int genphy_read_status(struct phy_device *phydev) EXPORT_SYMBOL(genphy_read_status); /** + * genphy_c37_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. This function is for Clause 37 1000Base-X mode. + */ +int genphy_c37_read_status(struct phy_device *phydev) +{ + int lpa, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->lp_advertising, lpa & LPA_LPACK); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising, lpa & LPA_1000XPAUSE); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising, + lpa & LPA_1000XPAUSE_ASYM); + + phy_resolve_aneg_linkmode(phydev); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + } + + return 0; +} +EXPORT_SYMBOL(genphy_c37_read_status); + +/** * genphy_soft_reset - software reset the PHY via BMCR_RESET bit * @phydev: target phy_device struct * @@ -2279,6 +2484,9 @@ static int phy_remove(struct device *dev) phydev->state = PHY_DOWN; mutex_unlock(&phydev->lock); + sfp_bus_del_upstream(phydev->sfp_bus); + phydev->sfp_bus = NULL; + if (phydev->drv && phydev->drv->remove) { phydev->drv->remove(phydev); |