diff options
Diffstat (limited to 'drivers/net/phy')
36 files changed, 3442 insertions, 256 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 3fa33d27eeba..047c27087b10 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -157,6 +157,13 @@ config MDIO_I2C This is library mode. +config MDIO_IPQ4019 + tristate "Qualcomm IPQ4019 MDIO interface support" + depends on HAS_IOMEM && OF_MDIO + help + This driver supports the MDIO interface found in Qualcomm + IPQ40xx series Soc-s. + config MDIO_IPQ8064 tristate "Qualcomm IPQ8064 MDIO interface support" depends on HAS_IOMEM && OF_MDIO @@ -177,7 +184,8 @@ config MDIO_MSCC_MIIM depends on HAS_IOMEM help This driver supports the MIIM (MDIO) interface found in the network - switches of the Microsemi SoCs + switches of the Microsemi SoCs; it is recommended to switch on + CONFIG_HIGH_RES_TIMERS config MDIO_MVUSB tristate "Marvell USB to MDIO Adapter" @@ -346,6 +354,17 @@ config BROADCOM_PHY Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481, BCM54810 and BCM5482 PHYs. +config BCM54140_PHY + tristate "Broadcom BCM54140 PHY" + depends on PHYLIB + depends on HWMON || HWMON=n + select BCM_NET_PHYLIB + help + Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. + + This driver also supports the hardware monitoring of this PHY and + exposes voltage and temperature sensors. + config BCM84881_PHY tristate "Broadcom BCM84881 PHY" depends on PHYLIB diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 2f5c7093a65b..dc9e53b511d6 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o +obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o obj-$(CONFIG_MDIO_IPQ8064) += mdio-ipq8064.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o @@ -68,6 +69,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o +obj-$(CONFIG_BCM54140_PHY) += bcm54140.o obj-$(CONFIG_BCM84881_PHY) += bcm84881.o obj-$(CONFIG_CICADA_PHY) += cicada.o obj-$(CONFIG_CORTINA_PHY) += cortina.o diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 31f731e6df72..97cbe593f0ea 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -12,6 +12,7 @@ #include <linux/string.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/ethtool_netlink.h> #include <linux/of_gpio.h> #include <linux/bitfield.h> #include <linux/gpio/consumer.h> @@ -43,6 +44,19 @@ #define AT803X_INTR_STATUS 0x13 #define AT803X_SMART_SPEED 0x14 +#define AT803X_SMART_SPEED_ENABLE BIT(5) +#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2) +#define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1) +#define AT803X_CDT 0x16 +#define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8) +#define AT803X_CDT_ENABLE_TEST BIT(0) +#define AT803X_CDT_STATUS 0x1c +#define AT803X_CDT_STATUS_STAT_NORMAL 0 +#define AT803X_CDT_STATUS_STAT_SHORT 1 +#define AT803X_CDT_STATUS_STAT_OPEN 2 +#define AT803X_CDT_STATUS_STAT_FAIL 3 +#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8) +#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0) #define AT803X_LED_CONTROL 0x18 #define AT803X_DEVICE_ADDR 0x03 @@ -103,11 +117,16 @@ #define AT803X_CLK_OUT_STRENGTH_HALF 1 #define AT803X_CLK_OUT_STRENGTH_QUARTER 2 +#define AT803X_DEFAULT_DOWNSHIFT 5 +#define AT803X_MIN_DOWNSHIFT 2 +#define AT803X_MAX_DOWNSHIFT 9 + #define ATH9331_PHY_ID 0x004dd041 #define ATH8030_PHY_ID 0x004dd076 #define ATH8031_PHY_ID 0x004dd074 +#define ATH8032_PHY_ID 0x004dd023 #define ATH8035_PHY_ID 0x004dd072 -#define AT803X_PHY_ID_MASK 0xffffffef +#define AT8030_PHY_ID_MASK 0xffffffef MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); @@ -712,15 +731,257 @@ static int at803x_read_status(struct phy_device *phydev) return 0; } +static int at803x_get_downshift(struct phy_device *phydev, u8 *d) +{ + int val; + + val = phy_read(phydev, AT803X_SMART_SPEED); + if (val < 0) + return val; + + if (val & AT803X_SMART_SPEED_ENABLE) + *d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2; + else + *d = DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int at803x_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 mask, set; + int ret; + + switch (cnt) { + case DOWNSHIFT_DEV_DEFAULT_COUNT: + cnt = AT803X_DEFAULT_DOWNSHIFT; + fallthrough; + case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT: + set = AT803X_SMART_SPEED_ENABLE | + AT803X_SMART_SPEED_BYPASS_TIMER | + FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2); + mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK; + break; + case DOWNSHIFT_DEV_DISABLE: + set = 0; + mask = AT803X_SMART_SPEED_ENABLE | + AT803X_SMART_SPEED_BYPASS_TIMER; + break; + default: + return -EINVAL; + } + + ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set); + + /* After changing the smart speed settings, we need to perform a + * software reset, use phy_init_hw() to make sure we set the + * reapply any values which might got lost during software reset. + */ + if (ret == 1) + ret = phy_init_hw(phydev); + + return ret; +} + +static int at803x_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return at803x_get_downshift(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int at803x_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return at803x_set_downshift(phydev, *(const u8 *)data); + default: + return -EOPNOTSUPP; + } +} + +static int at803x_cable_test_result_trans(u16 status) +{ + switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { + case AT803X_CDT_STATUS_STAT_NORMAL: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case AT803X_CDT_STATUS_STAT_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case AT803X_CDT_STATUS_STAT_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case AT803X_CDT_STATUS_STAT_FAIL: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static bool at803x_cdt_test_failed(u16 status) +{ + return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) == + AT803X_CDT_STATUS_STAT_FAIL; +} + +static bool at803x_cdt_fault_length_valid(u16 status) +{ + switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) { + case AT803X_CDT_STATUS_STAT_OPEN: + case AT803X_CDT_STATUS_STAT_SHORT: + return true; + } + return false; +} + +static int at803x_cdt_fault_length(u16 status) +{ + int dt; + + /* According to the datasheet the distance to the fault is + * DELTA_TIME * 0.824 meters. + * + * The author suspect the correct formula is: + * + * fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2 + * + * where c is the speed of light, VF is the velocity factor of + * the twisted pair cable, 125MHz the counter frequency and + * we need to divide by 2 because the hardware will measure the + * round trip time to the fault and back to the PHY. + * + * With a VF of 0.69 we get the factor 0.824 mentioned in the + * datasheet. + */ + dt = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, status); + + return (dt * 824) / 10; +} + +static int at803x_cdt_start(struct phy_device *phydev, int pair) +{ + u16 cdt; + + cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | + AT803X_CDT_ENABLE_TEST; + + return phy_write(phydev, AT803X_CDT, cdt); +} + +static int at803x_cdt_wait_for_completion(struct phy_device *phydev) +{ + int val, ret; + + /* One test run takes about 25ms */ + ret = phy_read_poll_timeout(phydev, AT803X_CDT, val, + !(val & AT803X_CDT_ENABLE_TEST), + 30000, 100000, true); + + return ret < 0 ? ret : 0; +} + +static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair) +{ + static const int ethtool_pair[] = { + ETHTOOL_A_CABLE_PAIR_A, + ETHTOOL_A_CABLE_PAIR_B, + ETHTOOL_A_CABLE_PAIR_C, + ETHTOOL_A_CABLE_PAIR_D, + }; + int ret, val; + + ret = at803x_cdt_start(phydev, pair); + if (ret) + return ret; + + ret = at803x_cdt_wait_for_completion(phydev); + if (ret) + return ret; + + val = phy_read(phydev, AT803X_CDT_STATUS); + if (val < 0) + return val; + + if (at803x_cdt_test_failed(val)) + return 0; + + ethnl_cable_test_result(phydev, ethtool_pair[pair], + at803x_cable_test_result_trans(val)); + + if (at803x_cdt_fault_length_valid(val)) + ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], + at803x_cdt_fault_length(val)); + + return 1; +} + +static int at803x_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + unsigned long pair_mask; + int retries = 20; + int pair, ret; + + if (phydev->phy_id == ATH9331_PHY_ID || + phydev->phy_id == ATH8032_PHY_ID) + pair_mask = 0x3; + else + pair_mask = 0xf; + + *finished = false; + + /* According to the datasheet the CDT can be performed when + * there is no link partner or when the link partner is + * auto-negotiating. Starting the test will restart the AN + * automatically. It seems that doing this repeatedly we will + * get a slot where our link partner won't disturb our + * measurement. + */ + while (pair_mask && retries--) { + for_each_set_bit(pair, &pair_mask, 4) { + ret = at803x_cable_test_one_pair(phydev, pair); + if (ret < 0) + return ret; + if (ret) + clear_bit(pair, &pair_mask); + } + if (pair_mask) + msleep(250); + } + + *finished = true; + + return 0; +} + +static int at803x_cable_test_start(struct phy_device *phydev) +{ + /* Enable auto-negotiation, but advertise no capabilities, no link + * will be established. A restart of the auto-negotiation is not + * required, because the cable test will automatically break the link. + */ + phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); + if (phydev->phy_id != ATH9331_PHY_ID && + phydev->phy_id != ATH8032_PHY_ID) + phy_write(phydev, MII_CTRL1000, 0); + + /* we do all the (time consuming) work later */ + return 0; +} + static struct phy_driver at803x_driver[] = { { /* Qualcomm Atheros AR8035 */ - .phy_id = ATH8035_PHY_ID, + PHY_ID_MATCH_EXACT(ATH8035_PHY_ID), .name = "Qualcomm Atheros AR8035", - .phy_id_mask = AT803X_PHY_ID_MASK, + .flags = PHY_POLL_CABLE_TEST, .probe = at803x_probe, .remove = at803x_remove, .config_init = at803x_config_init, + .soft_reset = genphy_soft_reset, .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, .suspend = at803x_suspend, @@ -729,11 +990,15 @@ static struct phy_driver at803x_driver[] = { .read_status = at803x_read_status, .ack_interrupt = at803x_ack_interrupt, .config_intr = at803x_config_intr, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, }, { /* Qualcomm Atheros AR8030 */ .phy_id = ATH8030_PHY_ID, .name = "Qualcomm Atheros AR8030", - .phy_id_mask = AT803X_PHY_ID_MASK, + .phy_id_mask = AT8030_PHY_ID_MASK, .probe = at803x_probe, .remove = at803x_remove, .config_init = at803x_config_init, @@ -747,12 +1012,13 @@ static struct phy_driver at803x_driver[] = { .config_intr = at803x_config_intr, }, { /* Qualcomm Atheros AR8031/AR8033 */ - .phy_id = ATH8031_PHY_ID, + PHY_ID_MATCH_EXACT(ATH8031_PHY_ID), .name = "Qualcomm Atheros AR8031/AR8033", - .phy_id_mask = AT803X_PHY_ID_MASK, + .flags = PHY_POLL_CABLE_TEST, .probe = at803x_probe, .remove = at803x_remove, .config_init = at803x_config_init, + .soft_reset = genphy_soft_reset, .set_wol = at803x_set_wol, .get_wol = at803x_get_wol, .suspend = at803x_suspend, @@ -762,23 +1028,49 @@ static struct phy_driver at803x_driver[] = { .aneg_done = at803x_aneg_done, .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, +}, { + /* Qualcomm Atheros AR8032 */ + PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), + .name = "Qualcomm Atheros AR8032", + .probe = at803x_probe, + .remove = at803x_remove, + .flags = PHY_POLL_CABLE_TEST, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, + /* PHY_BASIC_FEATURES */ + .ack_interrupt = at803x_ack_interrupt, + .config_intr = at803x_config_intr, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, }, { /* ATHEROS AR9331 */ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), .name = "Qualcomm Atheros AR9331 built-in PHY", .suspend = at803x_suspend, .resume = at803x_resume, + .flags = PHY_POLL_CABLE_TEST, /* PHY_BASIC_FEATURES */ .ack_interrupt = &at803x_ack_interrupt, .config_intr = &at803x_config_intr, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, } }; module_phy_driver(at803x_driver); static struct mdio_device_id __maybe_unused atheros_tbl[] = { - { ATH8030_PHY_ID, AT803X_PHY_ID_MASK }, - { ATH8031_PHY_ID, AT803X_PHY_ID_MASK }, - { ATH8035_PHY_ID, AT803X_PHY_ID_MASK }, + { ATH8030_PHY_ID, AT8030_PHY_ID_MASK }, + { PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, + { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, { } }; diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index e77b274a09fd..ef6825b30323 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -4,45 +4,103 @@ */ #include "bcm-phy-lib.h" +#include <linux/bitfield.h> #include <linux/brcmphy.h> #include <linux/export.h> #include <linux/mdio.h> #include <linux/module.h> #include <linux/phy.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #define MII_BCM_CHANNEL_WIDTH 0x2000 #define BCM_CL45VEN_EEE_ADV 0x3c -int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) { int rc; - rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + rc = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); if (rc < 0) return rc; - return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); + return __phy_write(phydev, MII_BCM54XX_EXP_DATA, val); +} +EXPORT_SYMBOL_GPL(__bcm_phy_write_exp); + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +{ + int rc; + + phy_lock_mdio_bus(phydev); + rc = __bcm_phy_write_exp(phydev, reg, val); + phy_unlock_mdio_bus(phydev); + + return rc; } EXPORT_SYMBOL_GPL(bcm_phy_write_exp); -int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg) { int val; - val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + val = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); if (val < 0) return val; - val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + val = __phy_read(phydev, MII_BCM54XX_EXP_DATA); /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); + __phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); return val; } +EXPORT_SYMBOL_GPL(__bcm_phy_read_exp); + +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +{ + int rc; + + phy_lock_mdio_bus(phydev); + rc = __bcm_phy_read_exp(phydev, reg); + phy_unlock_mdio_bus(phydev); + + return rc; +} EXPORT_SYMBOL_GPL(bcm_phy_read_exp); +int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set) +{ + int new, ret; + + ret = __phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (ret < 0) + return ret; + + ret = __phy_read(phydev, MII_BCM54XX_EXP_DATA); + if (ret < 0) + return ret; + + new = (ret & ~mask) | set; + if (new == ret) + return 0; + + return __phy_write(phydev, MII_BCM54XX_EXP_DATA, new); +} +EXPORT_SYMBOL_GPL(__bcm_phy_modify_exp); + +int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __bcm_phy_modify_exp(phydev, reg, mask, set); + phy_unlock_mdio_bus(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(bcm_phy_modify_exp); + int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) { /* The register must be written to both the Shadow Register Select and @@ -155,6 +213,86 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, } EXPORT_SYMBOL_GPL(bcm_phy_write_shadow); +int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb) +{ + int val; + + val = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); + if (val < 0) + return val; + + return __phy_read(phydev, MII_BCM54XX_RDB_DATA); +} +EXPORT_SYMBOL_GPL(__bcm_phy_read_rdb); + +int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __bcm_phy_read_rdb(phydev, rdb); + phy_unlock_mdio_bus(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_rdb); + +int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val) +{ + int ret; + + ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + return ret; + + return __phy_write(phydev, MII_BCM54XX_RDB_DATA, val); +} +EXPORT_SYMBOL_GPL(__bcm_phy_write_rdb); + +int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __bcm_phy_write_rdb(phydev, rdb, val); + phy_unlock_mdio_bus(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(bcm_phy_write_rdb); + +int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set) +{ + int new, ret; + + ret = __phy_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + return ret; + + ret = __phy_read(phydev, MII_BCM54XX_RDB_DATA); + if (ret < 0) + return ret; + + new = (ret & ~mask) | set; + if (new == ret) + return 0; + + return __phy_write(phydev, MII_BCM54XX_RDB_DATA, new); +} +EXPORT_SYMBOL_GPL(__bcm_phy_modify_rdb); + +int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, u16 set) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __bcm_phy_modify_rdb(phydev, rdb, mask, set); + phy_unlock_mdio_bus(phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(bcm_phy_modify_rdb); + int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down) { int val; @@ -445,6 +583,191 @@ int bcm_phy_enable_jumbo(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo); +static int __bcm_phy_enable_rdb_access(struct phy_device *phydev) +{ + return __bcm_phy_write_exp(phydev, BCM54XX_EXP_REG7E, 0); +} + +static int __bcm_phy_enable_legacy_access(struct phy_device *phydev) +{ + return __bcm_phy_write_rdb(phydev, BCM54XX_RDB_REG0087, + BCM54XX_ACCESS_MODE_LEGACY_EN); +} + +static int _bcm_phy_cable_test_start(struct phy_device *phydev, bool is_rdb) +{ + u16 mask, set; + int ret; + + /* Auto-negotiation must be enabled for cable diagnostics to work, but + * don't advertise any capabilities. + */ + phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); + phy_write(phydev, MII_CTRL1000, 0); + + phy_lock_mdio_bus(phydev); + if (is_rdb) { + ret = __bcm_phy_enable_legacy_access(phydev); + if (ret) + goto out; + } + + mask = BCM54XX_ECD_CTRL_CROSS_SHORT_DIS | BCM54XX_ECD_CTRL_UNIT_MASK; + set = BCM54XX_ECD_CTRL_RUN | BCM54XX_ECD_CTRL_BREAK_LINK | + FIELD_PREP(BCM54XX_ECD_CTRL_UNIT_MASK, + BCM54XX_ECD_CTRL_UNIT_CM); + + ret = __bcm_phy_modify_exp(phydev, BCM54XX_EXP_ECD_CTRL, mask, set); + +out: + /* re-enable the RDB access even if there was an error */ + if (is_rdb) + ret = __bcm_phy_enable_rdb_access(phydev) ? : ret; + + phy_unlock_mdio_bus(phydev); + + return ret; +} + +static int bcm_phy_cable_test_report_trans(int result) +{ + switch (result) { + case BCM54XX_ECD_FAULT_TYPE_OK: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case BCM54XX_ECD_FAULT_TYPE_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + case BCM54XX_ECD_FAULT_TYPE_INVALID: + case BCM54XX_ECD_FAULT_TYPE_BUSY: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static bool bcm_phy_distance_valid(int result) +{ + switch (result) { + case BCM54XX_ECD_FAULT_TYPE_OPEN: + case BCM54XX_ECD_FAULT_TYPE_SAME_SHORT: + case BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT: + return true; + } + return false; +} + +static int bcm_phy_report_length(struct phy_device *phydev, int pair) +{ + int val; + + val = __bcm_phy_read_exp(phydev, + BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS + pair); + if (val < 0) + return val; + + if (val == BCM54XX_ECD_LENGTH_RESULTS_INVALID) + return 0; + + ethnl_cable_test_fault_length(phydev, pair, val); + + return 0; +} + +static int _bcm_phy_cable_test_get_status(struct phy_device *phydev, + bool *finished, bool is_rdb) +{ + int pair_a, pair_b, pair_c, pair_d, ret; + + *finished = false; + + phy_lock_mdio_bus(phydev); + + if (is_rdb) { + ret = __bcm_phy_enable_legacy_access(phydev); + if (ret) + goto out; + } + + ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_CTRL); + if (ret < 0) + goto out; + + if (ret & BCM54XX_ECD_CTRL_IN_PROGRESS) { + ret = 0; + goto out; + } + + ret = __bcm_phy_read_exp(phydev, BCM54XX_EXP_ECD_FAULT_TYPE); + if (ret < 0) + goto out; + + pair_a = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK, ret); + pair_b = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK, ret); + pair_c = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK, ret); + pair_d = FIELD_GET(BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK, ret); + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + bcm_phy_cable_test_report_trans(pair_a)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, + bcm_phy_cable_test_report_trans(pair_b)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C, + bcm_phy_cable_test_report_trans(pair_c)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, + bcm_phy_cable_test_report_trans(pair_d)); + + if (bcm_phy_distance_valid(pair_a)) + bcm_phy_report_length(phydev, 0); + if (bcm_phy_distance_valid(pair_b)) + bcm_phy_report_length(phydev, 1); + if (bcm_phy_distance_valid(pair_c)) + bcm_phy_report_length(phydev, 2); + if (bcm_phy_distance_valid(pair_d)) + bcm_phy_report_length(phydev, 3); + + ret = 0; + *finished = true; +out: + /* re-enable the RDB access even if there was an error */ + if (is_rdb) + ret = __bcm_phy_enable_rdb_access(phydev) ? : ret; + + phy_unlock_mdio_bus(phydev); + + return ret; +} + +int bcm_phy_cable_test_start(struct phy_device *phydev) +{ + return _bcm_phy_cable_test_start(phydev, false); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start); + +int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished) +{ + return _bcm_phy_cable_test_get_status(phydev, finished, false); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status); + +/* We assume that all PHYs which support RDB access can be switched to legacy + * mode. If, in the future, this is not true anymore, we have to re-implement + * this with RDB access. + */ +int bcm_phy_cable_test_start_rdb(struct phy_device *phydev) +{ + return _bcm_phy_cable_test_start(phydev, true); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_start_rdb); + +int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev, + bool *finished) +{ + return _bcm_phy_cable_test_get_status(phydev, finished, true); +} +EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb); + MODULE_DESCRIPTION("Broadcom PHY Library"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Broadcom Corporation"); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h index 129df819be8c..237a8503c9b4 100644 --- a/drivers/net/phy/bcm-phy-lib.h +++ b/drivers/net/phy/bcm-phy-lib.h @@ -27,8 +27,12 @@ #define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) +int __bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); +int __bcm_phy_read_exp(struct phy_device *phydev, u16 reg); +int __bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); +int bcm_phy_modify_exp(struct phy_device *phydev, u16 reg, u16 mask, u16 set); static inline int bcm_phy_write_exp_sel(struct phy_device *phydev, u16 reg, u16 val) @@ -48,6 +52,15 @@ int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, u16 val); int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow); +int __bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val); +int bcm_phy_write_rdb(struct phy_device *phydev, u16 rdb, u16 val); +int __bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb); +int bcm_phy_read_rdb(struct phy_device *phydev, u16 rdb); +int __bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, + u16 set); +int bcm_phy_modify_rdb(struct phy_device *phydev, u16 rdb, u16 mask, + u16 set); + int bcm_phy_ack_intr(struct phy_device *phydev); int bcm_phy_config_intr(struct phy_device *phydev); @@ -67,4 +80,10 @@ void bcm_phy_r_rc_cal_reset(struct phy_device *phydev); int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev); int bcm_phy_enable_jumbo(struct phy_device *phydev); +int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev, + bool *finished); +int bcm_phy_cable_test_start_rdb(struct phy_device *phydev); +int bcm_phy_cable_test_start(struct phy_device *phydev); +int bcm_phy_cable_test_get_status(struct phy_device *phydev, bool *finished); + #endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm54140.c b/drivers/net/phy/bcm54140.c new file mode 100644 index 000000000000..8998e68bb26b --- /dev/null +++ b/drivers/net/phy/bcm54140.c @@ -0,0 +1,860 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* Broadcom BCM54140 Quad SGMII/QSGMII Copper/Fiber Gigabit PHY + * + * Copyright (c) 2020 Michael Walle <michael@walle.cc> + */ + +#include <linux/bitfield.h> +#include <linux/brcmphy.h> +#include <linux/hwmon.h> +#include <linux/module.h> +#include <linux/phy.h> + +#include "bcm-phy-lib.h" + +/* RDB per-port registers + */ +#define BCM54140_RDB_ISR 0x00a /* interrupt status */ +#define BCM54140_RDB_IMR 0x00b /* interrupt mask */ +#define BCM54140_RDB_INT_LINK BIT(1) /* link status changed */ +#define BCM54140_RDB_INT_SPEED BIT(2) /* link speed change */ +#define BCM54140_RDB_INT_DUPLEX BIT(3) /* duplex mode changed */ +#define BCM54140_RDB_SPARE1 0x012 /* spare control 1 */ +#define BCM54140_RDB_SPARE1_LSLM BIT(2) /* link speed LED mode */ +#define BCM54140_RDB_SPARE2 0x014 /* spare control 2 */ +#define BCM54140_RDB_SPARE2_WS_RTRY_DIS BIT(8) /* wirespeed retry disable */ +#define BCM54140_RDB_SPARE2_WS_RTRY_LIMIT GENMASK(4, 2) /* retry limit */ +#define BCM54140_RDB_SPARE3 0x015 /* spare control 3 */ +#define BCM54140_RDB_SPARE3_BIT0 BIT(0) +#define BCM54140_RDB_LED_CTRL 0x019 /* LED control */ +#define BCM54140_RDB_LED_CTRL_ACTLINK0 BIT(4) +#define BCM54140_RDB_LED_CTRL_ACTLINK1 BIT(8) +#define BCM54140_RDB_C_APWR 0x01a /* auto power down control */ +#define BCM54140_RDB_C_APWR_SINGLE_PULSE BIT(8) /* single pulse */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS 0 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN 1 /* ADP enable */ +#define BCM54140_RDB_C_APWR_APD_MODE_DIS2 2 /* ADP disable */ +#define BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG 3 /* ADP enable w/ aneg */ +#define BCM54140_RDB_C_APWR_APD_MODE_MASK GENMASK(6, 5) +#define BCM54140_RDB_C_APWR_SLP_TIM_MASK BIT(4)/* sleep timer */ +#define BCM54140_RDB_C_APWR_SLP_TIM_2_7 0 /* 2.7s */ +#define BCM54140_RDB_C_APWR_SLP_TIM_5_4 1 /* 5.4s */ +#define BCM54140_RDB_C_PWR 0x02a /* copper power control */ +#define BCM54140_RDB_C_PWR_ISOLATE BIT(5) /* super isolate mode */ +#define BCM54140_RDB_C_MISC_CTRL 0x02f /* misc copper control */ +#define BCM54140_RDB_C_MISC_CTRL_WS_EN BIT(4) /* wirespeed enable */ + +/* RDB global registers + */ +#define BCM54140_RDB_TOP_IMR 0x82d /* interrupt mask */ +#define BCM54140_RDB_TOP_IMR_PORT0 BIT(4) +#define BCM54140_RDB_TOP_IMR_PORT1 BIT(5) +#define BCM54140_RDB_TOP_IMR_PORT2 BIT(6) +#define BCM54140_RDB_TOP_IMR_PORT3 BIT(7) +#define BCM54140_RDB_MON_CTRL 0x831 /* monitor control */ +#define BCM54140_RDB_MON_CTRL_V_MODE BIT(3) /* voltage mode */ +#define BCM54140_RDB_MON_CTRL_SEL_MASK GENMASK(2, 1) +#define BCM54140_RDB_MON_CTRL_SEL_TEMP 0 /* meassure temperature */ +#define BCM54140_RDB_MON_CTRL_SEL_1V0 1 /* meassure AVDDL 1.0V */ +#define BCM54140_RDB_MON_CTRL_SEL_3V3 2 /* meassure AVDDH 3.3V */ +#define BCM54140_RDB_MON_CTRL_SEL_RR 3 /* meassure all round-robin */ +#define BCM54140_RDB_MON_CTRL_PWR_DOWN BIT(0) /* power-down monitor */ +#define BCM54140_RDB_MON_TEMP_VAL 0x832 /* temperature value */ +#define BCM54140_RDB_MON_TEMP_MAX 0x833 /* temperature high thresh */ +#define BCM54140_RDB_MON_TEMP_MIN 0x834 /* temperature low thresh */ +#define BCM54140_RDB_MON_TEMP_DATA_MASK GENMASK(9, 0) +#define BCM54140_RDB_MON_1V0_VAL 0x835 /* AVDDL 1.0V value */ +#define BCM54140_RDB_MON_1V0_MAX 0x836 /* AVDDL 1.0V high thresh */ +#define BCM54140_RDB_MON_1V0_MIN 0x837 /* AVDDL 1.0V low thresh */ +#define BCM54140_RDB_MON_1V0_DATA_MASK GENMASK(10, 0) +#define BCM54140_RDB_MON_3V3_VAL 0x838 /* AVDDH 3.3V value */ +#define BCM54140_RDB_MON_3V3_MAX 0x839 /* AVDDH 3.3V high thresh */ +#define BCM54140_RDB_MON_3V3_MIN 0x83a /* AVDDH 3.3V low thresh */ +#define BCM54140_RDB_MON_3V3_DATA_MASK GENMASK(11, 0) +#define BCM54140_RDB_MON_ISR 0x83b /* interrupt status */ +#define BCM54140_RDB_MON_ISR_3V3 BIT(2) /* AVDDH 3.3V alarm */ +#define BCM54140_RDB_MON_ISR_1V0 BIT(1) /* AVDDL 1.0V alarm */ +#define BCM54140_RDB_MON_ISR_TEMP BIT(0) /* temperature alarm */ + +/* According to the datasheet the formula is: + * T = 413.35 - (0.49055 * bits[9:0]) + */ +#define BCM54140_HWMON_TO_TEMP(v) (413350L - (v) * 491) +#define BCM54140_HWMON_FROM_TEMP(v) DIV_ROUND_CLOSEST_ULL(413350L - (v), 491) + +/* According to the datasheet the formula is: + * U = bits[11:0] / 1024 * 220 / 0.2 + * + * Normalized: + * U = bits[11:0] / 4096 * 2514 + */ +#define BCM54140_HWMON_TO_IN_1V0(v) ((v) * 2514 >> 11) +#define BCM54140_HWMON_FROM_IN_1V0(v) DIV_ROUND_CLOSEST_ULL(((v) << 11), 2514) + +/* According to the datasheet the formula is: + * U = bits[10:0] / 1024 * 880 / 0.7 + * + * Normalized: + * U = bits[10:0] / 2048 * 4400 + */ +#define BCM54140_HWMON_TO_IN_3V3(v) ((v) * 4400 >> 12) +#define BCM54140_HWMON_FROM_IN_3V3(v) DIV_ROUND_CLOSEST_ULL(((v) << 12), 4400) + +#define BCM54140_HWMON_TO_IN(ch, v) ((ch) ? BCM54140_HWMON_TO_IN_3V3(v) \ + : BCM54140_HWMON_TO_IN_1V0(v)) +#define BCM54140_HWMON_FROM_IN(ch, v) ((ch) ? BCM54140_HWMON_FROM_IN_3V3(v) \ + : BCM54140_HWMON_FROM_IN_1V0(v)) +#define BCM54140_HWMON_IN_MASK(ch) ((ch) ? BCM54140_RDB_MON_3V3_DATA_MASK \ + : BCM54140_RDB_MON_1V0_DATA_MASK) +#define BCM54140_HWMON_IN_VAL_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_VAL \ + : BCM54140_RDB_MON_1V0_VAL) +#define BCM54140_HWMON_IN_MIN_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MIN \ + : BCM54140_RDB_MON_1V0_MIN) +#define BCM54140_HWMON_IN_MAX_REG(ch) ((ch) ? BCM54140_RDB_MON_3V3_MAX \ + : BCM54140_RDB_MON_1V0_MAX) +#define BCM54140_HWMON_IN_ALARM_BIT(ch) ((ch) ? BCM54140_RDB_MON_ISR_3V3 \ + : BCM54140_RDB_MON_ISR_1V0) + +/* This PHY has two different PHY IDs depening on its MODE_SEL pin. This + * pin choses between 4x SGMII and QSGMII mode: + * AE02_5009 4x SGMII + * AE02_5019 QSGMII + */ +#define BCM54140_PHY_ID_MASK 0xffffffe8 + +#define BCM54140_PHY_ID_REV(phy_id) ((phy_id) & 0x7) +#define BCM54140_REV_B0 1 + +#define BCM54140_DEFAULT_DOWNSHIFT 5 +#define BCM54140_MAX_DOWNSHIFT 9 + +struct bcm54140_priv { + int port; + int base_addr; +#if IS_ENABLED(CONFIG_HWMON) + /* protect the alarm bits */ + struct mutex alarm_lock; + u16 alarm; +#endif +}; + +#if IS_ENABLED(CONFIG_HWMON) +static umode_t bcm54140_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_min: + case hwmon_in_max: + return 0644; + case hwmon_in_label: + case hwmon_in_input: + case hwmon_in_alarm: + return 0444; + default: + return 0; + } + case hwmon_temp: + switch (attr) { + case hwmon_temp_min: + case hwmon_temp_max: + return 0644; + case hwmon_temp_input: + case hwmon_temp_alarm: + return 0444; + default: + return 0; + } + default: + return 0; + } +} + +static int bcm54140_hwmon_read_alarm(struct device *dev, unsigned int bit, + long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + struct bcm54140_priv *priv = phydev->priv; + int tmp, ret = 0; + + mutex_lock(&priv->alarm_lock); + + /* latch any alarm bits */ + tmp = bcm_phy_read_rdb(phydev, BCM54140_RDB_MON_ISR); + if (tmp < 0) { + ret = tmp; + goto out; + } + priv->alarm |= tmp; + + *val = !!(priv->alarm & bit); + priv->alarm &= ~bit; + +out: + mutex_unlock(&priv->alarm_lock); + return ret; +} + +static int bcm54140_hwmon_read_temp(struct device *dev, u32 attr, long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 reg; + int tmp; + + switch (attr) { + case hwmon_temp_input: + reg = BCM54140_RDB_MON_TEMP_VAL; + break; + case hwmon_temp_min: + reg = BCM54140_RDB_MON_TEMP_MIN; + break; + case hwmon_temp_max: + reg = BCM54140_RDB_MON_TEMP_MAX; + break; + case hwmon_temp_alarm: + return bcm54140_hwmon_read_alarm(dev, + BCM54140_RDB_MON_ISR_TEMP, + val); + default: + return -EOPNOTSUPP; + } + + tmp = bcm_phy_read_rdb(phydev, reg); + if (tmp < 0) + return tmp; + + *val = BCM54140_HWMON_TO_TEMP(tmp & BCM54140_RDB_MON_TEMP_DATA_MASK); + + return 0; +} + +static int bcm54140_hwmon_read_in(struct device *dev, u32 attr, + int channel, long *val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 bit, reg; + int tmp; + + switch (attr) { + case hwmon_in_input: + reg = BCM54140_HWMON_IN_VAL_REG(channel); + break; + case hwmon_in_min: + reg = BCM54140_HWMON_IN_MIN_REG(channel); + break; + case hwmon_in_max: + reg = BCM54140_HWMON_IN_MAX_REG(channel); + break; + case hwmon_in_alarm: + bit = BCM54140_HWMON_IN_ALARM_BIT(channel); + return bcm54140_hwmon_read_alarm(dev, bit, val); + default: + return -EOPNOTSUPP; + } + + tmp = bcm_phy_read_rdb(phydev, reg); + if (tmp < 0) + return tmp; + + tmp &= BCM54140_HWMON_IN_MASK(channel); + *val = BCM54140_HWMON_TO_IN(channel, tmp); + + return 0; +} + +static int bcm54140_hwmon_read(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + switch (type) { + case hwmon_temp: + return bcm54140_hwmon_read_temp(dev, attr, val); + case hwmon_in: + return bcm54140_hwmon_read_in(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static const char *const bcm54140_hwmon_in_labels[] = { + "AVDDL", + "AVDDH", +}; + +static int bcm54140_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, const char **str) +{ + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_label: + *str = bcm54140_hwmon_in_labels[channel]; + return 0; + default: + return -EOPNOTSUPP; + } + default: + return -EOPNOTSUPP; + } +} + +static int bcm54140_hwmon_write_temp(struct device *dev, u32 attr, + int channel, long val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 mask = BCM54140_RDB_MON_TEMP_DATA_MASK; + u16 reg; + + val = clamp_val(val, BCM54140_HWMON_TO_TEMP(mask), + BCM54140_HWMON_TO_TEMP(0)); + + switch (attr) { + case hwmon_temp_min: + reg = BCM54140_RDB_MON_TEMP_MIN; + break; + case hwmon_temp_max: + reg = BCM54140_RDB_MON_TEMP_MAX; + break; + default: + return -EOPNOTSUPP; + } + + return bcm_phy_modify_rdb(phydev, reg, mask, + BCM54140_HWMON_FROM_TEMP(val)); +} + +static int bcm54140_hwmon_write_in(struct device *dev, u32 attr, + int channel, long val) +{ + struct phy_device *phydev = dev_get_drvdata(dev); + u16 mask = BCM54140_HWMON_IN_MASK(channel); + u16 reg; + + val = clamp_val(val, 0, BCM54140_HWMON_TO_IN(channel, mask)); + + switch (attr) { + case hwmon_in_min: + reg = BCM54140_HWMON_IN_MIN_REG(channel); + break; + case hwmon_in_max: + reg = BCM54140_HWMON_IN_MAX_REG(channel); + break; + default: + return -EOPNOTSUPP; + } + + return bcm_phy_modify_rdb(phydev, reg, mask, + BCM54140_HWMON_FROM_IN(channel, val)); +} + +static int bcm54140_hwmon_write(struct device *dev, + enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + switch (type) { + case hwmon_temp: + return bcm54140_hwmon_write_temp(dev, attr, channel, val); + case hwmon_in: + return bcm54140_hwmon_write_in(dev, attr, channel, val); + default: + return -EOPNOTSUPP; + } +} + +static const struct hwmon_channel_info *bcm54140_hwmon_info[] = { + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX | + HWMON_T_ALARM), + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | + HWMON_I_ALARM | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX | + HWMON_I_ALARM | HWMON_I_LABEL), + NULL +}; + +static const struct hwmon_ops bcm54140_hwmon_ops = { + .is_visible = bcm54140_hwmon_is_visible, + .read = bcm54140_hwmon_read, + .read_string = bcm54140_hwmon_read_string, + .write = bcm54140_hwmon_write, +}; + +static const struct hwmon_chip_info bcm54140_chip_info = { + .ops = &bcm54140_hwmon_ops, + .info = bcm54140_hwmon_info, +}; + +static int bcm54140_enable_monitoring(struct phy_device *phydev) +{ + u16 mask, set; + + /* 3.3V voltage mode */ + set = BCM54140_RDB_MON_CTRL_V_MODE; + + /* select round-robin */ + mask = BCM54140_RDB_MON_CTRL_SEL_MASK; + set |= FIELD_PREP(BCM54140_RDB_MON_CTRL_SEL_MASK, + BCM54140_RDB_MON_CTRL_SEL_RR); + + /* remove power-down bit */ + mask |= BCM54140_RDB_MON_CTRL_PWR_DOWN; + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_MON_CTRL, mask, set); +} + +static int bcm54140_probe_once(struct phy_device *phydev) +{ + struct device *hwmon; + int ret; + + /* enable hardware monitoring */ + ret = bcm54140_enable_monitoring(phydev); + if (ret) + return ret; + + hwmon = devm_hwmon_device_register_with_info(&phydev->mdio.dev, + "BCM54140", phydev, + &bcm54140_chip_info, + NULL); + return PTR_ERR_OR_ZERO(hwmon); +} +#endif + +static int bcm54140_base_read_rdb(struct phy_device *phydev, u16 rdb) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __phy_package_read(phydev, MII_BCM54XX_RDB_DATA); + +out: + phy_unlock_mdio_bus(phydev); + return ret; +} + +static int bcm54140_base_write_rdb(struct phy_device *phydev, + u16 rdb, u16 val) +{ + int ret; + + phy_lock_mdio_bus(phydev); + ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb); + if (ret < 0) + goto out; + + ret = __phy_package_write(phydev, MII_BCM54XX_RDB_DATA, val); + +out: + phy_unlock_mdio_bus(phydev); + return ret; +} + +/* Under some circumstances a core PLL may not lock, this will then prevent + * a successful link establishment. Restart the PLL after the voltages are + * stable to workaround this issue. + */ +static int bcm54140_b0_workaround(struct phy_device *phydev) +{ + int spare3; + int ret; + + spare3 = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE3); + if (spare3 < 0) + return spare3; + + spare3 &= ~BCM54140_RDB_SPARE3_BIT0; + + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); + if (ret) + return ret; + + ret = phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); + if (ret) + return ret; + + spare3 |= BCM54140_RDB_SPARE3_BIT0; + + return bcm_phy_write_rdb(phydev, BCM54140_RDB_SPARE3, spare3); +} + +/* The BCM54140 is a quad PHY where only the first port has access to the + * global register. Thus we need to find out its PHY address. + * + */ +static int bcm54140_get_base_addr_and_port(struct phy_device *phydev) +{ + struct bcm54140_priv *priv = phydev->priv; + struct mii_bus *bus = phydev->mdio.bus; + int addr, min_addr, max_addr; + int step = 1; + u32 phy_id; + int tmp; + + min_addr = phydev->mdio.addr; + max_addr = phydev->mdio.addr; + addr = phydev->mdio.addr; + + /* We scan forward and backwards and look for PHYs which have the + * same phy_id like we do. Step 1 will scan forward, step 2 + * backwards. Once we are finished, we have a min_addr and + * max_addr which resembles the range of PHY addresses of the same + * type of PHY. There is one caveat; there may be many PHYs of + * the same type, but we know that each PHY takes exactly 4 + * consecutive addresses. Therefore we can deduce our offset + * to the base address of this quad PHY. + */ + + while (1) { + if (step == 3) { + break; + } else if (step == 1) { + max_addr = addr; + addr++; + } else { + min_addr = addr; + addr--; + } + + if (addr < 0 || addr >= PHY_MAX_ADDR) { + addr = phydev->mdio.addr; + step++; + continue; + } + + /* read the PHY id */ + tmp = mdiobus_read(bus, addr, MII_PHYSID1); + if (tmp < 0) + return tmp; + phy_id = tmp << 16; + tmp = mdiobus_read(bus, addr, MII_PHYSID2); + if (tmp < 0) + return tmp; + phy_id |= tmp; + + /* see if it is still the same PHY */ + if ((phy_id & phydev->drv->phy_id_mask) != + (phydev->drv->phy_id & phydev->drv->phy_id_mask)) { + addr = phydev->mdio.addr; + step++; + } + } + + /* The range we get should be a multiple of four. Please note that both + * the min_addr and max_addr are inclusive. So we have to add one if we + * subtract them. + */ + if ((max_addr - min_addr + 1) % 4) { + dev_err(&phydev->mdio.dev, + "Detected Quad PHY IDs %d..%d doesn't make sense.\n", + min_addr, max_addr); + return -EINVAL; + } + + priv->port = (phydev->mdio.addr - min_addr) % 4; + priv->base_addr = phydev->mdio.addr - priv->port; + + return 0; +} + +static int bcm54140_probe(struct phy_device *phydev) +{ + struct bcm54140_priv *priv; + int ret; + + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + ret = bcm54140_get_base_addr_and_port(phydev); + if (ret) + return ret; + + devm_phy_package_join(&phydev->mdio.dev, phydev, priv->base_addr, 0); + +#if IS_ENABLED(CONFIG_HWMON) + mutex_init(&priv->alarm_lock); + + if (phy_package_init_once(phydev)) { + ret = bcm54140_probe_once(phydev); + if (ret) + return ret; + } +#endif + + phydev_dbg(phydev, "probed (port %d, base PHY address %d)\n", + priv->port, priv->base_addr); + + return 0; +} + +static int bcm54140_config_init(struct phy_device *phydev) +{ + u16 reg = 0xffff; + int ret; + + /* Apply hardware errata */ + if (BCM54140_PHY_ID_REV(phydev->phy_id) == BCM54140_REV_B0) { + ret = bcm54140_b0_workaround(phydev); + if (ret) + return ret; + } + + /* Unmask events we are interested in. */ + reg &= ~(BCM54140_RDB_INT_DUPLEX | + BCM54140_RDB_INT_SPEED | + BCM54140_RDB_INT_LINK); + ret = bcm_phy_write_rdb(phydev, BCM54140_RDB_IMR, reg); + if (ret) + return ret; + + /* LED1=LINKSPD[1], LED2=LINKSPD[2], LED3=LINK/ACTIVITY */ + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE1, + 0, BCM54140_RDB_SPARE1_LSLM); + if (ret) + return ret; + + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_LED_CTRL, + 0, BCM54140_RDB_LED_CTRL_ACTLINK0); + if (ret) + return ret; + + /* disable super isolate mode */ + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_PWR, + BCM54140_RDB_C_PWR_ISOLATE, 0); +} + +static int bcm54140_did_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + + return (ret < 0) ? 0 : ret; +} + +static int bcm54140_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* clear pending interrupts */ + reg = bcm_phy_read_rdb(phydev, BCM54140_RDB_ISR); + if (reg < 0) + return reg; + + return 0; +} + +static int bcm54140_config_intr(struct phy_device *phydev) +{ + struct bcm54140_priv *priv = phydev->priv; + static const u16 port_to_imr_bit[] = { + BCM54140_RDB_TOP_IMR_PORT0, BCM54140_RDB_TOP_IMR_PORT1, + BCM54140_RDB_TOP_IMR_PORT2, BCM54140_RDB_TOP_IMR_PORT3, + }; + int reg; + + if (priv->port >= ARRAY_SIZE(port_to_imr_bit)) + return -EINVAL; + + reg = bcm54140_base_read_rdb(phydev, BCM54140_RDB_TOP_IMR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~port_to_imr_bit[priv->port]; + else + reg |= port_to_imr_bit[priv->port]; + + return bcm54140_base_write_rdb(phydev, BCM54140_RDB_TOP_IMR, reg); +} + +static int bcm54140_get_downshift(struct phy_device *phydev, u8 *data) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_MISC_CTRL); + if (val < 0) + return val; + + if (!(val & BCM54140_RDB_C_MISC_CTRL_WS_EN)) { + *data = DOWNSHIFT_DEV_DISABLE; + return 0; + } + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_SPARE2); + if (val < 0) + return val; + + if (val & BCM54140_RDB_SPARE2_WS_RTRY_DIS) + *data = 1; + else + *data = FIELD_GET(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, val) + 2; + + return 0; +} + +static int bcm54140_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 mask, set; + int ret; + + if (cnt > BCM54140_MAX_DOWNSHIFT && cnt != DOWNSHIFT_DEV_DEFAULT_COUNT) + return -EINVAL; + + if (!cnt) + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + BCM54140_RDB_C_MISC_CTRL_WS_EN, 0); + + if (cnt == DOWNSHIFT_DEV_DEFAULT_COUNT) + cnt = BCM54140_DEFAULT_DOWNSHIFT; + + if (cnt == 1) { + mask = 0; + set = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + } else { + mask = BCM54140_RDB_SPARE2_WS_RTRY_DIS; + mask |= BCM54140_RDB_SPARE2_WS_RTRY_LIMIT; + set = FIELD_PREP(BCM54140_RDB_SPARE2_WS_RTRY_LIMIT, cnt - 2); + } + ret = bcm_phy_modify_rdb(phydev, BCM54140_RDB_SPARE2, + mask, set); + if (ret) + return ret; + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_MISC_CTRL, + 0, BCM54140_RDB_C_MISC_CTRL_WS_EN); +} + +static int bcm54140_get_edpd(struct phy_device *phydev, u16 *tx_interval) +{ + int val; + + val = bcm_phy_read_rdb(phydev, BCM54140_RDB_C_APWR); + if (val < 0) + return val; + + switch (FIELD_GET(BCM54140_RDB_C_APWR_APD_MODE_MASK, val)) { + case BCM54140_RDB_C_APWR_APD_MODE_DIS: + case BCM54140_RDB_C_APWR_APD_MODE_DIS2: + *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; + break; + case BCM54140_RDB_C_APWR_APD_MODE_EN: + case BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG: + switch (FIELD_GET(BCM54140_RDB_C_APWR_SLP_TIM_MASK, val)) { + case BCM54140_RDB_C_APWR_SLP_TIM_2_7: + *tx_interval = 2700; + break; + case BCM54140_RDB_C_APWR_SLP_TIM_5_4: + *tx_interval = 5400; + break; + } + } + + return 0; +} + +static int bcm54140_set_edpd(struct phy_device *phydev, u16 tx_interval) +{ + u16 mask, set; + + mask = BCM54140_RDB_C_APWR_APD_MODE_MASK; + if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_DIS); + else + set = FIELD_PREP(BCM54140_RDB_C_APWR_APD_MODE_MASK, + BCM54140_RDB_C_APWR_APD_MODE_EN_ANEG); + + /* enable single pulse mode */ + set |= BCM54140_RDB_C_APWR_SINGLE_PULSE; + + /* set sleep timer */ + mask |= BCM54140_RDB_C_APWR_SLP_TIM_MASK; + switch (tx_interval) { + case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: + case ETHTOOL_PHY_EDPD_DISABLE: + case 2700: + set |= BCM54140_RDB_C_APWR_SLP_TIM_2_7; + break; + case 5400: + set |= BCM54140_RDB_C_APWR_SLP_TIM_5_4; + break; + default: + return -EINVAL; + } + + return bcm_phy_modify_rdb(phydev, BCM54140_RDB_C_APWR, mask, set); +} + +static int bcm54140_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_get_downshift(phydev, data); + case ETHTOOL_PHY_EDPD: + return bcm54140_get_edpd(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int bcm54140_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return bcm54140_set_downshift(phydev, *(const u8 *)data); + case ETHTOOL_PHY_EDPD: + return bcm54140_set_edpd(phydev, *(const u16 *)data); + default: + return -EOPNOTSUPP; + } +} + +static struct phy_driver bcm54140_drivers[] = { + { + .phy_id = PHY_ID_BCM54140, + .phy_id_mask = BCM54140_PHY_ID_MASK, + .name = "Broadcom BCM54140", + .flags = PHY_POLL_CABLE_TEST, + .features = PHY_GBIT_FEATURES, + .config_init = bcm54140_config_init, + .did_interrupt = bcm54140_did_interrupt, + .ack_interrupt = bcm54140_ack_intr, + .config_intr = bcm54140_config_intr, + .probe = bcm54140_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .soft_reset = genphy_soft_reset, + .get_tunable = bcm54140_get_tunable, + .set_tunable = bcm54140_set_tunable, + .cable_test_start = bcm_phy_cable_test_start_rdb, + .cable_test_get_status = bcm_phy_cable_test_get_status_rdb, + }, +}; +module_phy_driver(bcm54140_drivers); + +static struct mdio_device_id __maybe_unused bcm54140_tbl[] = { + { PHY_ID_BCM54140, BCM54140_PHY_ID_MASK }, + { } +}; + +MODULE_AUTHOR("Michael Walle"); +MODULE_DESCRIPTION("Broadcom BCM54140 PHY driver"); +MODULE_DEVICE_TABLE(mdio, bcm54140_tbl); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index f6dce6850850..df360e1c5069 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -55,7 +55,7 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev) u16 mask = be32_to_cpup(paddr++); u16 val_bits = be32_to_cpup(paddr++); int val; - u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; + u32 regnum = mdiobus_c45_addr(devid, reg); val = 0; if (mask) { val = phy_read(phydev, regnum); diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index ae4873f2f86e..cd271de9609b 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -195,7 +195,8 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 && BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 && BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M && - BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810) + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 && + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) return; val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); @@ -214,8 +215,10 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) clk125en = false; } else { if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) { - /* Here, bit 0 _enables_ CLK125 when set */ - val &= ~BCM54XX_SHD_SCR3_DEF_CLK125; + if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) { + /* Here, bit 0 _enables_ CLK125 when set */ + val &= ~BCM54XX_SHD_SCR3_DEF_CLK125; + } clk125en = false; } } @@ -225,8 +228,13 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) else val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; - if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) - val |= BCM54XX_SHD_SCR3_TRDDAPD; + if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) { + if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 || + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811) + val |= BCM54810_SHD_SCR3_TRDDAPD; + else + val |= BCM54XX_SHD_SCR3_TRDDAPD; + } if (orig != val) bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); @@ -327,6 +335,32 @@ static int bcm54xx_resume(struct phy_device *phydev) return bcm54xx_config_init(phydev); } +static int bcm54811_config_init(struct phy_device *phydev) +{ + int err, reg; + + /* Disable BroadR-Reach function. */ + reg = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL); + reg &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN; + err = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL, + reg); + if (err < 0) + return err; + + err = bcm54xx_config_init(phydev); + + /* Enable CLK125 MUX on LED4 if ref clock is enabled. */ + if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) { + reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0); + err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0, + BCM54612E_LED4_CLK125OUT_EN | reg); + if (err < 0) + return err; + } + + return err; +} + static int bcm5482_config_init(struct phy_device *phydev) { int err, reg; @@ -723,6 +757,17 @@ static struct phy_driver broadcom_drivers[] = { .suspend = genphy_suspend, .resume = bcm54xx_resume, }, { + .phy_id = PHY_ID_BCM54811, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM54811", + /* PHY_GBIT_FEATURES */ + .config_init = bcm54811_config_init, + .config_aneg = bcm5481_config_aneg, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, + .suspend = genphy_suspend, + .resume = bcm54xx_resume, +}, { .phy_id = PHY_ID_BCM5482, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM5482", @@ -782,6 +827,19 @@ static struct phy_driver broadcom_drivers[] = { .get_stats = bcm53xx_phy_get_stats, .probe = bcm53xx_phy_probe, }, { + .phy_id = PHY_ID_BCM53125, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM53125", + .flags = PHY_IS_INTERNAL, + /* PHY_GBIT_FEATURES */ + .get_sset_count = bcm_phy_get_sset_count, + .get_strings = bcm_phy_get_strings, + .get_stats = bcm53xx_phy_get_stats, + .probe = bcm53xx_phy_probe, + .config_init = bcm54xx_config_init, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, +}, { .phy_id = PHY_ID_BCM89610, .phy_id_mask = 0xfffffff0, .name = "Broadcom BCM89610", @@ -803,6 +861,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCM5464, 0xfffffff0 }, { PHY_ID_BCM5481, 0xfffffff0 }, { PHY_ID_BCM54810, 0xfffffff0 }, + { PHY_ID_BCM54811, 0xfffffff0 }, { PHY_ID_BCM5482, 0xfffffff0 }, { PHY_ID_BCM50610, 0xfffffff0 }, { PHY_ID_BCM50610M, 0xfffffff0 }, @@ -810,6 +869,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCMAC131, 0xfffffff0 }, { PHY_ID_BCM5241, 0xfffffff0 }, { PHY_ID_BCM5395, 0xfffffff0 }, + { PHY_ID_BCM53125, 0xfffffff0 }, { PHY_ID_BCM89610, 0xfffffff0 }, { } }; diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c index 856cdc36aacd..40514a94e6ff 100644 --- a/drivers/net/phy/cortina.c +++ b/drivers/net/phy/cortina.c @@ -17,8 +17,7 @@ static int cortina_read_reg(struct phy_device *phydev, u16 regnum) { - return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, - MII_ADDR_C45 | regnum); + return mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr, 0, regnum); } static int cortina_read_status(struct phy_device *phydev) @@ -82,7 +81,6 @@ static struct phy_driver cortina_driver[] = { .features = PHY_10GBIT_FEATURES, .config_aneg = gen10g_config_aneg, .read_status = cortina_read_status, - .soft_reset = genphy_no_soft_reset, .probe = cortina_probe, }, }; diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 415c27310982..ecbd5e0d685c 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1120,7 +1120,7 @@ static struct dp83640_clock *dp83640_clock_get_bus(struct mii_bus *bus) goto out; } dp83640_clock_init(clock, bus); - list_add_tail(&phyter_clocks, &clock->list); + list_add_tail(&clock->list, &phyter_clocks); out: mutex_unlock(&phyter_clocks_lock); diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index fe9aa3ad52a7..1dd19d0cb269 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -137,19 +137,18 @@ static int dp83822_set_wol(struct phy_device *phydev, value &= ~DP83822_WOL_SECURE_ON; } - value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL | - DP83822_WOL_CLR_INDICATION); - phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, - value); + /* Clear any pending WoL interrupt */ + phy_read(phydev, MII_DP83822_MISR2); + + value |= DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL | + DP83822_WOL_CLR_INDICATION; + + return phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG, value); } else { - value = phy_read_mmd(phydev, DP83822_DEVADDR, - MII_DP83822_WOL_CFG); - value &= ~DP83822_WOL_EN; - phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, - value); + return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG, DP83822_WOL_EN); } - - return 0; } static void dp83822_get_wol(struct phy_device *phydev, @@ -258,12 +257,11 @@ static int dp83822_config_intr(struct phy_device *phydev) static int dp83822_config_init(struct phy_device *phydev) { - int value; - - value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN; + int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN | + DP83822_WOL_SECURE_ON; - return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, - value); + return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG, value); } static int dp83822_phy_reset(struct phy_device *phydev) diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index b55e3c0403ed..4017ae1692d8 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -365,7 +365,7 @@ static int dp83867_get_downshift(struct phy_device *phydev, u8 *data) break; default: return -EINVAL; - }; + } *data = enable ? count : DOWNSHIFT_DEV_DISABLE; @@ -400,7 +400,7 @@ static int dp83867_set_downshift(struct phy_device *phydev, u8 cnt) phydev_err(phydev, "Downshift count must be 1, 2, 4 or 8\n"); return -EINVAL; - }; + } val = DP83867_DOWNSHIFT_EN; val |= FIELD_PREP(DP83867_DOWNSHIFT_ATTEMPT_MASK, count); diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c index 7996a4aea8d2..cfb22a21a2e6 100644 --- a/drivers/net/phy/dp83869.c +++ b/drivers/net/phy/dp83869.c @@ -65,7 +65,9 @@ #define DP83869_RGMII_RX_CLK_DELAY_EN BIT(0) /* STRAP_STS1 bits */ +#define DP83869_STRAP_OP_MODE_MASK GENMASK(2, 0) #define DP83869_STRAP_STS1_RESERVED BIT(11) +#define DP83869_STRAP_MIRROR_ENABLED BIT(12) /* PHYCTRL bits */ #define DP83869_RX_FIFO_SHIFT 12 @@ -160,6 +162,20 @@ static int dp83869_config_port_mirroring(struct phy_device *phydev) DP83869_CFG3_PORT_MIRROR_EN); } +static int dp83869_set_strapped_mode(struct phy_device *phydev) +{ + struct dp83869_private *dp83869 = phydev->priv; + int val; + + val = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); + if (val < 0) + return val; + + dp83869->mode = val & DP83869_STRAP_OP_MODE_MASK; + + return 0; +} + #ifdef CONFIG_OF_MDIO static int dp83869_of_init(struct phy_device *phydev) { @@ -184,6 +200,10 @@ static int dp83869_of_init(struct phy_device *phydev) if (dp83869->mode < DP83869_RGMII_COPPER_ETHERNET || dp83869->mode > DP83869_SGMII_COPPER_ETHERNET) return -EINVAL; + } else { + ret = dp83869_set_strapped_mode(phydev); + if (ret) + return ret; } if (of_property_read_bool(of_node, "ti,max-output-impedance")) @@ -191,10 +211,18 @@ static int dp83869_of_init(struct phy_device *phydev) else if (of_property_read_bool(of_node, "ti,min-output-impedance")) dp83869->io_impedance = DP83869_IO_MUX_CFG_IO_IMPEDANCE_MIN; - if (of_property_read_bool(of_node, "enet-phy-lane-swap")) + if (of_property_read_bool(of_node, "enet-phy-lane-swap")) { dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; - else - dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; + } else { + /* If the lane swap is not in the DT then check the straps */ + ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1); + if (ret < 0) + return ret; + if (ret & DP83869_STRAP_MIRROR_ENABLED) + dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN; + else + dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS; + } if (of_property_read_u32(of_node, "rx-fifo-depth", &dp83869->rx_fifo_depth)) @@ -209,7 +237,7 @@ static int dp83869_of_init(struct phy_device *phydev) #else static int dp83869_of_init(struct phy_device *phydev) { - return 0; + return dp83869_set_strapped_mode(phydev); } #endif /* CONFIG_OF_MDIO */ diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c index 06f08832ebcd..d73725312c7c 100644 --- a/drivers/net/phy/dp83tc811.c +++ b/drivers/net/phy/dp83tc811.c @@ -139,16 +139,19 @@ static int dp83811_set_wol(struct phy_device *phydev, value &= ~DP83811_WOL_SECURE_ON; } - value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL | - DP83811_WOL_CLR_INDICATION); - phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, - value); + /* Clear any pending WoL interrupt */ + phy_read(phydev, MII_DP83811_INT_STAT1); + + value |= DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL | + DP83811_WOL_CLR_INDICATION; + + return phy_write_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_WOL_CFG, value); } else { - phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, - DP83811_WOL_EN); + return phy_clear_bits_mmd(phydev, DP83811_DEVADDR, + MII_DP83811_WOL_CFG, DP83811_WOL_EN); } - return 0; } static void dp83811_get_wol(struct phy_device *phydev, @@ -292,8 +295,8 @@ static int dp83811_config_init(struct phy_device *phydev) value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN; - return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, - value); + return phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, + value); } static int dp83811_phy_reset(struct phy_device *phydev) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 7fc8e10c5f33..4ea226566cec 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -27,6 +27,7 @@ #include <linux/module.h> #include <linux/mii.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #include <linux/phy.h> #include <linux/marvell_phy.h> #include <linux/bitfield.h> @@ -41,7 +42,9 @@ #define MII_MARVELL_FIBER_PAGE 0x01 #define MII_MARVELL_MSCR_PAGE 0x02 #define MII_MARVELL_LED_PAGE 0x03 +#define MII_MARVELL_VCT5_PAGE 0x05 #define MII_MARVELL_MISC_TEST_PAGE 0x06 +#define MII_MARVELL_VCT7_PAGE 0x07 #define MII_MARVELL_WOL_PAGE 0x11 #define MII_M1011_IEVENT 0x13 @@ -162,6 +165,90 @@ #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */ #define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */ +#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10 +#define MII_VCT5_TX_RX_MDI1_COUPLING 0x11 +#define MII_VCT5_TX_RX_MDI2_COUPLING 0x12 +#define MII_VCT5_TX_RX_MDI3_COUPLING 0x13 +#define MII_VCT5_TX_RX_AMPLITUDE_MASK 0x7f00 +#define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8 +#define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION BIT(15) + +#define MII_VCT5_CTRL 0x17 +#define MII_VCT5_CTRL_ENABLE BIT(15) +#define MII_VCT5_CTRL_COMPLETE BIT(14) +#define MII_VCT5_CTRL_TX_SAME_CHANNEL (0x0 << 11) +#define MII_VCT5_CTRL_TX0_CHANNEL (0x4 << 11) +#define MII_VCT5_CTRL_TX1_CHANNEL (0x5 << 11) +#define MII_VCT5_CTRL_TX2_CHANNEL (0x6 << 11) +#define MII_VCT5_CTRL_TX3_CHANNEL (0x7 << 11) +#define MII_VCT5_CTRL_SAMPLES_2 (0x0 << 8) +#define MII_VCT5_CTRL_SAMPLES_4 (0x1 << 8) +#define MII_VCT5_CTRL_SAMPLES_8 (0x2 << 8) +#define MII_VCT5_CTRL_SAMPLES_16 (0x3 << 8) +#define MII_VCT5_CTRL_SAMPLES_32 (0x4 << 8) +#define MII_VCT5_CTRL_SAMPLES_64 (0x5 << 8) +#define MII_VCT5_CTRL_SAMPLES_128 (0x6 << 8) +#define MII_VCT5_CTRL_SAMPLES_DEFAULT (0x6 << 8) +#define MII_VCT5_CTRL_SAMPLES_256 (0x7 << 8) +#define MII_VCT5_CTRL_SAMPLES_SHIFT 8 +#define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK (0x0 << 6) +#define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK (0x1 << 6) +#define MII_VCT5_CTRL_MODE_OFFSET (0x2 << 6) +#define MII_VCT5_CTRL_SAMPLE_POINT (0x3 << 6) +#define MII_VCT5_CTRL_PEEK_HYST_DEFAULT 3 + +#define MII_VCT5_SAMPLE_POINT_DISTANCE 0x18 +#define MII_VCT5_SAMPLE_POINT_DISTANCE_MAX 511 +#define MII_VCT5_TX_PULSE_CTRL 0x1c +#define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN BIT(12) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS (0x0 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS (0x1 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS (0x2 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS (0x3 << 10) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_SHIFT 10 +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_1000mV (0x0 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_750mV (0x1 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_500mV (0x2 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_250mV (0x3 << 8) +#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_SHIFT 8 +#define MII_VCT5_TX_PULSE_CTRL_MAX_AMP BIT(7) +#define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV (0x6 << 0) + +/* For TDR measurements less than 11 meters, a short pulse should be + * used. + */ +#define TDR_SHORT_CABLE_LENGTH 11 + +#define MII_VCT7_PAIR_0_DISTANCE 0x10 +#define MII_VCT7_PAIR_1_DISTANCE 0x11 +#define MII_VCT7_PAIR_2_DISTANCE 0x12 +#define MII_VCT7_PAIR_3_DISTANCE 0x13 + +#define MII_VCT7_RESULTS 0x14 +#define MII_VCT7_RESULTS_PAIR3_MASK 0xf000 +#define MII_VCT7_RESULTS_PAIR2_MASK 0x0f00 +#define MII_VCT7_RESULTS_PAIR1_MASK 0x00f0 +#define MII_VCT7_RESULTS_PAIR0_MASK 0x000f +#define MII_VCT7_RESULTS_PAIR3_SHIFT 12 +#define MII_VCT7_RESULTS_PAIR2_SHIFT 8 +#define MII_VCT7_RESULTS_PAIR1_SHIFT 4 +#define MII_VCT7_RESULTS_PAIR0_SHIFT 0 +#define MII_VCT7_RESULTS_INVALID 0 +#define MII_VCT7_RESULTS_OK 1 +#define MII_VCT7_RESULTS_OPEN 2 +#define MII_VCT7_RESULTS_SAME_SHORT 3 +#define MII_VCT7_RESULTS_CROSS_SHORT 4 +#define MII_VCT7_RESULTS_BUSY 9 + +#define MII_VCT7_CTRL 0x15 +#define MII_VCT7_CTRL_RUN_NOW BIT(15) +#define MII_VCT7_CTRL_RUN_ANEG BIT(14) +#define MII_VCT7_CTRL_DISABLE_CROSS BIT(13) +#define MII_VCT7_CTRL_RUN_AFTER_BREAK_LINK BIT(12) +#define MII_VCT7_CTRL_IN_PROGRESS BIT(11) +#define MII_VCT7_CTRL_METERS BIT(10) +#define MII_VCT7_CTRL_CENTIMETERS 0 + #define LPA_PAUSE_FIBER 0x180 #define LPA_PAUSE_ASYM_FIBER 0x100 @@ -188,6 +275,11 @@ struct marvell_priv { u64 stats[ARRAY_SIZE(marvell_hw_stats)]; char *hwmon_name; struct device *hwmon_dev; + bool cable_test_tdr; + u32 first; + u32 last; + u32 step; + s8 pair; }; static int marvell_read_page(struct phy_device *phydev) @@ -1658,6 +1750,382 @@ static void marvell_get_stats(struct phy_device *phydev, data[i] = marvell_get_stat(phydev, i); } +static int marvell_vct5_wait_complete(struct phy_device *phydev) +{ + int i; + int val; + + for (i = 0; i < 32; i++) { + val = __phy_read(phydev, MII_VCT5_CTRL); + if (val < 0) + return val; + + if (val & MII_VCT5_CTRL_COMPLETE) + return 0; + } + + phydev_err(phydev, "Timeout while waiting for cable test to finish\n"); + return -ETIMEDOUT; +} + +static int marvell_vct5_amplitude(struct phy_device *phydev, int pair) +{ + int amplitude; + int val; + int reg; + + reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair; + val = __phy_read(phydev, reg); + + if (val < 0) + return 0; + + amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >> + MII_VCT5_TX_RX_AMPLITUDE_SHIFT; + + if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION)) + amplitude = -amplitude; + + return 1000 * amplitude / 128; +} + +static u32 marvell_vct5_distance2cm(int distance) +{ + return distance * 805 / 10; +} + +static u32 marvell_vct5_cm2distance(int cm) +{ + return cm * 10 / 805; +} + +static int marvell_vct5_amplitude_distance(struct phy_device *phydev, + int distance, int pair) +{ + u16 reg; + int err; + int mV; + int i; + + err = __phy_write(phydev, MII_VCT5_SAMPLE_POINT_DISTANCE, + distance); + if (err) + return err; + + reg = MII_VCT5_CTRL_ENABLE | + MII_VCT5_CTRL_TX_SAME_CHANNEL | + MII_VCT5_CTRL_SAMPLES_DEFAULT | + MII_VCT5_CTRL_SAMPLE_POINT | + MII_VCT5_CTRL_PEEK_HYST_DEFAULT; + err = __phy_write(phydev, MII_VCT5_CTRL, reg); + if (err) + return err; + + err = marvell_vct5_wait_complete(phydev); + if (err) + return err; + + for (i = 0; i < 4; i++) { + if (pair != PHY_PAIR_ALL && i != pair) + continue; + + mV = marvell_vct5_amplitude(phydev, i); + ethnl_cable_test_amplitude(phydev, i, mV); + } + + return 0; +} + +static int marvell_vct5_amplitude_graph(struct phy_device *phydev) +{ + struct marvell_priv *priv = phydev->priv; + int distance; + u16 width; + int page; + int err; + u16 reg; + + if (priv->first <= TDR_SHORT_CABLE_LENGTH) + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS; + else + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS; + + reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV | + MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN | + MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width; + + err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_TX_PULSE_CTRL, reg); + if (err) + return err; + + /* Reading the TDR data is very MDIO heavy. We need to optimize + * access to keep the time to a minimum. So lock the bus once, + * and don't release it until complete. We can then avoid having + * to change the page for every access, greatly speeding things + * up. + */ + page = phy_select_page(phydev, MII_MARVELL_VCT5_PAGE); + if (page < 0) + goto restore_page; + + for (distance = priv->first; + distance <= priv->last; + distance += priv->step) { + err = marvell_vct5_amplitude_distance(phydev, distance, + priv->pair); + if (err) + goto restore_page; + + if (distance > TDR_SHORT_CABLE_LENGTH && + width == MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS) { + width = MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS; + reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV | + MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN | + MII_VCT5_TX_PULSE_CTRL_MAX_AMP | width; + err = __phy_write(phydev, MII_VCT5_TX_PULSE_CTRL, reg); + if (err) + goto restore_page; + } + } + +restore_page: + return phy_restore_page(phydev, page, err); +} + +static int marvell_cable_test_start_common(struct phy_device *phydev) +{ + int bmcr, bmsr, ret; + + /* If auto-negotiation is enabled, but not complete, the cable + * test never completes. So disable auto-neg. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + bmsr = phy_read(phydev, MII_BMSR); + + if (bmsr < 0) + return bmsr; + + if (bmcr & BMCR_ANENABLE) { + ret = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); + if (ret < 0) + return ret; + ret = genphy_soft_reset(phydev); + if (ret < 0) + return ret; + } + + /* If the link is up, allow it some time to go down */ + if (bmsr & BMSR_LSTATUS) + msleep(1500); + + return 0; +} + +static int marvell_vct7_cable_test_start(struct phy_device *phydev) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + ret = marvell_cable_test_start_common(phydev); + if (ret) + return ret; + + priv->cable_test_tdr = false; + + /* Reset the VCT5 API control to defaults, otherwise + * VCT7 does not work correctly. + */ + ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_CTRL, + MII_VCT5_CTRL_TX_SAME_CHANNEL | + MII_VCT5_CTRL_SAMPLES_DEFAULT | + MII_VCT5_CTRL_MODE_MAXIMUM_PEEK | + MII_VCT5_CTRL_PEEK_HYST_DEFAULT); + if (ret) + return ret; + + ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE, + MII_VCT5_SAMPLE_POINT_DISTANCE, 0); + if (ret) + return ret; + + return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL, + MII_VCT7_CTRL_RUN_NOW | + MII_VCT7_CTRL_CENTIMETERS); +} + +static int marvell_vct5_cable_test_tdr_start(struct phy_device *phydev, + const struct phy_tdr_config *cfg) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + priv->cable_test_tdr = true; + priv->first = marvell_vct5_cm2distance(cfg->first); + priv->last = marvell_vct5_cm2distance(cfg->last); + priv->step = marvell_vct5_cm2distance(cfg->step); + priv->pair = cfg->pair; + + if (priv->first > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX) + return -EINVAL; + + if (priv->last > MII_VCT5_SAMPLE_POINT_DISTANCE_MAX) + return -EINVAL; + + /* Disable VCT7 */ + ret = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL, 0); + if (ret) + return ret; + + ret = marvell_cable_test_start_common(phydev); + if (ret) + return ret; + + ret = ethnl_cable_test_pulse(phydev, 1000); + if (ret) + return ret; + + return ethnl_cable_test_step(phydev, + marvell_vct5_distance2cm(priv->first), + marvell_vct5_distance2cm(priv->last), + marvell_vct5_distance2cm(priv->step)); +} + +static int marvell_vct7_distance_to_length(int distance, bool meter) +{ + if (meter) + distance *= 100; + + return distance; +} + +static bool marvell_vct7_distance_valid(int result) +{ + switch (result) { + case MII_VCT7_RESULTS_OPEN: + case MII_VCT7_RESULTS_SAME_SHORT: + case MII_VCT7_RESULTS_CROSS_SHORT: + return true; + } + return false; +} + +static int marvell_vct7_report_length(struct phy_device *phydev, + int pair, bool meter) +{ + int length; + int ret; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_PAIR_0_DISTANCE + pair); + if (ret < 0) + return ret; + + length = marvell_vct7_distance_to_length(ret, meter); + + ethnl_cable_test_fault_length(phydev, pair, length); + + return 0; +} + +static int marvell_vct7_cable_test_report_trans(int result) +{ + switch (result) { + case MII_VCT7_RESULTS_OK: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + case MII_VCT7_RESULTS_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + case MII_VCT7_RESULTS_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + case MII_VCT7_RESULTS_CROSS_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static int marvell_vct7_cable_test_report(struct phy_device *phydev) +{ + int pair0, pair1, pair2, pair3; + bool meter; + int ret; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_RESULTS); + if (ret < 0) + return ret; + + pair3 = (ret & MII_VCT7_RESULTS_PAIR3_MASK) >> + MII_VCT7_RESULTS_PAIR3_SHIFT; + pair2 = (ret & MII_VCT7_RESULTS_PAIR2_MASK) >> + MII_VCT7_RESULTS_PAIR2_SHIFT; + pair1 = (ret & MII_VCT7_RESULTS_PAIR1_MASK) >> + MII_VCT7_RESULTS_PAIR1_SHIFT; + pair0 = (ret & MII_VCT7_RESULTS_PAIR0_MASK) >> + MII_VCT7_RESULTS_PAIR0_SHIFT; + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + marvell_vct7_cable_test_report_trans(pair0)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, + marvell_vct7_cable_test_report_trans(pair1)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C, + marvell_vct7_cable_test_report_trans(pair2)); + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, + marvell_vct7_cable_test_report_trans(pair3)); + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, MII_VCT7_CTRL); + if (ret < 0) + return ret; + + meter = ret & MII_VCT7_CTRL_METERS; + + if (marvell_vct7_distance_valid(pair0)) + marvell_vct7_report_length(phydev, 0, meter); + if (marvell_vct7_distance_valid(pair1)) + marvell_vct7_report_length(phydev, 1, meter); + if (marvell_vct7_distance_valid(pair2)) + marvell_vct7_report_length(phydev, 2, meter); + if (marvell_vct7_distance_valid(pair3)) + marvell_vct7_report_length(phydev, 3, meter); + + return 0; +} + +static int marvell_vct7_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + struct marvell_priv *priv = phydev->priv; + int ret; + + if (priv->cable_test_tdr) { + ret = marvell_vct5_amplitude_graph(phydev); + *finished = true; + return ret; + } + + *finished = false; + + ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE, + MII_VCT7_CTRL); + + if (ret < 0) + return ret; + + if (!(ret & MII_VCT7_CTRL_IN_PROGRESS)) { + *finished = true; + + return marvell_vct7_cable_test_report(phydev); + } + + return 0; +} + #ifdef CONFIG_HWMON static int m88e1121_get_temp(struct phy_device *phydev, long *temp) { @@ -2353,6 +2821,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1510", .features = PHY_GBIT_FIBRE_FEATURES, + .flags = PHY_POLL_CABLE_TEST, .probe = &m88e1510_probe, .config_init = &m88e1510_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2372,12 +2841,16 @@ static struct phy_driver marvell_drivers[] = { .set_loopback = genphy_loopback, .get_tunable = m88e1011_get_tunable, .set_tunable = m88e1011_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E1540, .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1540", /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .probe = m88e1510_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2394,6 +2867,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E1545, @@ -2401,6 +2877,7 @@ static struct phy_driver marvell_drivers[] = { .name = "Marvell 88E1545", .probe = m88e1510_probe, /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, .read_status = &marvell_read_status, @@ -2416,6 +2893,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, { .phy_id = MARVELL_PHY_ID_88E3016, @@ -2442,6 +2922,7 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E6390", /* PHY_GBIT_FEATURES */ + .flags = PHY_POLL_CABLE_TEST, .probe = m88e6390_probe, .config_init = &marvell_config_init, .config_aneg = &m88e6390_config_aneg, @@ -2458,6 +2939,9 @@ static struct phy_driver marvell_drivers[] = { .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .cable_test_start = marvell_vct7_cable_test_start, + .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, + .cable_test_get_status = marvell_vct7_cable_test_get_status, }, }; diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index ff12492771ab..d4c2e62b2439 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -66,6 +66,9 @@ enum { MV_PCS_CSSR1_SPD2_2500 = 0x0004, MV_PCS_CSSR1_SPD2_10000 = 0x0000, + /* Temperature read register (88E2110 only) */ + MV_PCS_TEMP = 0x8042, + /* These registers appear at 0x800X and 0xa00X - the 0xa00X control * registers appear to set themselves to the 0x800X when AN is * restarted, but status registers appear readable from either. @@ -77,6 +80,7 @@ enum { MV_V2_PORT_CTRL = 0xf001, MV_V2_PORT_CTRL_SWRST = BIT(15), MV_V2_PORT_CTRL_PWRDOWN = BIT(11), + /* Temperature control/read registers (88X3310 only) */ MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000, MV_V2_TEMP_CTRL_SAMPLE = 0x0000, @@ -104,6 +108,24 @@ static umode_t mv3310_hwmon_is_visible(const void *data, return 0; } +static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev) +{ + return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP); +} + +static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev) +{ + return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP); +} + +static int mv10g_hwmon_read_temp_reg(struct phy_device *phydev) +{ + if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310) + return mv3310_hwmon_read_temp_reg(phydev); + else /* MARVELL_PHY_ID_88E2110 */ + return mv2110_hwmon_read_temp_reg(phydev); +} + static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *value) { @@ -116,7 +138,7 @@ static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type, } if (type == hwmon_temp && attr == hwmon_temp_input) { - temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP); + temp = mv10g_hwmon_read_temp_reg(phydev); if (temp < 0) return temp; @@ -169,6 +191,9 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable) u16 val; int ret; + if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310) + return 0; + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP, MV_V2_TEMP_UNKNOWN); if (ret < 0) @@ -728,7 +753,6 @@ static struct phy_driver mv3310_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "mv88x3310", .get_features = mv3310_get_features, - .soft_reset = genphy_no_soft_reset, .config_init = mv3310_config_init, .probe = mv3310_probe, .suspend = mv3310_suspend, @@ -746,7 +770,6 @@ static struct phy_driver mv3310_drivers[] = { .probe = mv3310_probe, .suspend = mv3310_suspend, .resume = mv3310_resume, - .soft_reset = genphy_no_soft_reset, .config_init = mv3310_config_init, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c index f1ded03f0229..77fc970cdfde 100644 --- a/drivers/net/phy/mdio-bcm-iproc.c +++ b/drivers/net/phy/mdio-bcm-iproc.c @@ -159,7 +159,7 @@ static int iproc_mdio_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - dev_info(&pdev->dev, "Broadcom iProc MDIO bus at 0x%p\n", priv->base); + dev_info(&pdev->dev, "Broadcom iProc MDIO bus registered\n"); return 0; @@ -179,7 +179,7 @@ static int iproc_mdio_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -int iproc_mdio_resume(struct device *dev) +static int iproc_mdio_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct iproc_mdio_priv *priv = platform_get_drvdata(pdev); diff --git a/drivers/net/phy/mdio-ipq4019.c b/drivers/net/phy/mdio-ipq4019.c new file mode 100644 index 000000000000..1ce81ff2f41d --- /dev/null +++ b/drivers/net/phy/mdio-ipq4019.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. */ +/* Copyright (c) 2020 Sartura Ltd. */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/of_address.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/platform_device.h> + +#define MDIO_ADDR_REG 0x44 +#define MDIO_DATA_WRITE_REG 0x48 +#define MDIO_DATA_READ_REG 0x4c +#define MDIO_CMD_REG 0x50 +#define MDIO_CMD_ACCESS_BUSY BIT(16) +#define MDIO_CMD_ACCESS_START BIT(8) +#define MDIO_CMD_ACCESS_CODE_READ 0 +#define MDIO_CMD_ACCESS_CODE_WRITE 1 + +#define ipq4019_MDIO_TIMEOUT 10000 +#define ipq4019_MDIO_SLEEP 10 + +struct ipq4019_mdio_data { + void __iomem *membase; +}; + +static int ipq4019_mdio_wait_busy(struct mii_bus *bus) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int busy; + + return readl_poll_timeout(priv->membase + MDIO_CMD_REG, busy, + (busy & MDIO_CMD_ACCESS_BUSY) == 0, + ipq4019_MDIO_SLEEP, ipq4019_MDIO_TIMEOUT); +} + +static int ipq4019_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int cmd; + + /* Reject clause 45 */ + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + /* issue the phy address and reg */ + writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; + + /* issue read command */ + writel(cmd, priv->membase + MDIO_CMD_REG); + + /* Wait read complete */ + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + /* Read and return data */ + return readl(priv->membase + MDIO_DATA_READ_REG); +} + +static int ipq4019_mdio_write(struct mii_bus *bus, int mii_id, int regnum, + u16 value) +{ + struct ipq4019_mdio_data *priv = bus->priv; + unsigned int cmd; + + /* Reject clause 45 */ + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + /* issue the phy address and reg */ + writel((mii_id << 8) | regnum, priv->membase + MDIO_ADDR_REG); + + /* issue write data */ + writel(value, priv->membase + MDIO_DATA_WRITE_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; + /* issue write command */ + writel(cmd, priv->membase + MDIO_CMD_REG); + + /* Wait write complete */ + if (ipq4019_mdio_wait_busy(bus)) + return -ETIMEDOUT; + + return 0; +} + +static int ipq4019_mdio_probe(struct platform_device *pdev) +{ + struct ipq4019_mdio_data *priv; + struct mii_bus *bus; + int ret; + + bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*priv)); + if (!bus) + return -ENOMEM; + + priv = bus->priv; + + priv->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->membase)) + return PTR_ERR(priv->membase); + + bus->name = "ipq4019_mdio"; + bus->read = ipq4019_mdio_read; + bus->write = ipq4019_mdio_write; + bus->parent = &pdev->dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); + + ret = of_mdiobus_register(bus, pdev->dev.of_node); + if (ret) { + dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); + return ret; + } + + platform_set_drvdata(pdev, bus); + + return 0; +} + +static int ipq4019_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus = platform_get_drvdata(pdev); + + mdiobus_unregister(bus); + + return 0; +} + +static const struct of_device_id ipq4019_mdio_dt_ids[] = { + { .compatible = "qcom,ipq4019-mdio" }, + { } +}; +MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids); + +static struct platform_driver ipq4019_mdio_driver = { + .probe = ipq4019_mdio_probe, + .remove = ipq4019_mdio_remove, + .driver = { + .name = "ipq4019-mdio", + .of_match_table = ipq4019_mdio_dt_ids, + }, +}; + +module_platform_driver(ipq4019_mdio_driver); + +MODULE_DESCRIPTION("ipq4019 MDIO interface driver"); +MODULE_AUTHOR("Qualcomm Atheros"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c index 2d16fc4173c1..b72c6d185175 100644 --- a/drivers/net/phy/mdio-moxart.c +++ b/drivers/net/phy/mdio-moxart.c @@ -12,7 +12,6 @@ #include <linux/of_mdio.h> #include <linux/phy.h> #include <linux/platform_device.h> -#include <linux/regulator/consumer.h> #define REG_PHY_CTRL 0 #define REG_PHY_WRITE_DATA 4 diff --git a/drivers/net/phy/mdio-mscc-miim.c b/drivers/net/phy/mdio-mscc-miim.c index badbc99bedd3..11f583fd4611 100644 --- a/drivers/net/phy/mdio-mscc-miim.c +++ b/drivers/net/phy/mdio-mscc-miim.c @@ -16,6 +16,7 @@ #include <linux/of_mdio.h> #define MSCC_MIIM_REG_STATUS 0x0 +#define MSCC_MIIM_STATUS_STAT_PENDING BIT(2) #define MSCC_MIIM_STATUS_STAT_BUSY BIT(3) #define MSCC_MIIM_REG_CMD 0x8 #define MSCC_MIIM_CMD_OPR_WRITE BIT(1) @@ -38,17 +39,35 @@ struct mscc_miim_dev { void __iomem *phy_regs; }; +/* When high resolution timers aren't built-in: we can't use usleep_range() as + * we would sleep way too long. Use udelay() instead. + */ +#define mscc_readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \ +({ \ + if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \ + readl_poll_timeout_atomic(addr, val, cond, delay_us, \ + timeout_us); \ + readl_poll_timeout(addr, val, cond, delay_us, timeout_us); \ +}) + static int mscc_miim_wait_ready(struct mii_bus *bus) { struct mscc_miim_dev *miim = bus->priv; u32 val; - readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val, - !(val & MSCC_MIIM_STATUS_STAT_BUSY), 100, 250000); - if (val & MSCC_MIIM_STATUS_STAT_BUSY) - return -ETIMEDOUT; + return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val, + !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, + 10000); +} - return 0; +static int mscc_miim_wait_pending(struct mii_bus *bus) +{ + struct mscc_miim_dev *miim = bus->priv; + u32 val; + + return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val, + !(val & MSCC_MIIM_STATUS_STAT_PENDING), + 50, 10000); } static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum) @@ -57,7 +76,7 @@ static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum) u32 val; int ret; - ret = mscc_miim_wait_ready(bus); + ret = mscc_miim_wait_pending(bus); if (ret) goto out; @@ -86,7 +105,7 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id, struct mscc_miim_dev *miim = bus->priv; int ret; - ret = mscc_miim_wait_ready(bus); + ret = mscc_miim_wait_pending(bus); if (ret < 0) goto out; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 7a4eb3f2cb74..255fdfcc13a6 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -42,14 +42,11 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev) { - int error; - /* Deassert the optional reset signal */ mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev, "reset", GPIOD_OUT_LOW); - error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio); - if (error) - return error; + if (IS_ERR(mdiodev->reset_gpio)) + return PTR_ERR(mdiodev->reset_gpio); if (mdiodev->reset_gpio) gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset"); @@ -170,7 +167,12 @@ EXPORT_SYMBOL(mdiobus_alloc_size); static void _devm_mdiobus_free(struct device *dev, void *res) { - mdiobus_free(*(struct mii_bus **)res); + struct mii_bus *bus = *(struct mii_bus **)res; + + if (bus->is_managed_registered && bus->state == MDIOBUS_REGISTERED) + mdiobus_unregister(bus); + + mdiobus_free(bus); } static int devm_mdiobus_match(struct device *dev, void *res, void *data) @@ -210,6 +212,7 @@ struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv) if (bus) { *ptr = bus; devres_add(dev, ptr); + bus->is_managed = 1; } else { devres_free(ptr); } @@ -611,6 +614,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) } mutex_init(&bus->mdio_lock); + mutex_init(&bus->shared_lock); /* de-assert bus level PHY GPIO reset */ gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW); @@ -627,8 +631,11 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) gpiod_set_value_cansleep(gpiod, 0); } - if (bus->reset) - bus->reset(bus); + if (bus->reset) { + err = bus->reset(bus); + if (err) + goto error_reset_gpiod; + } for (i = 0; i < PHY_MAX_ADDR; i++) { if ((bus->phy_mask & (1 << i)) == 0) { @@ -657,7 +664,7 @@ error: mdiodev->device_remove(mdiodev); mdiodev->device_free(mdiodev); } - +error_reset_gpiod: /* Put PHYs in RESET to save power */ if (bus->reset_gpiod) gpiod_set_value_cansleep(bus->reset_gpiod, 1); diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 3a4d83fa52dc..3fe552675dd2 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -19,6 +19,7 @@ * ksz9477 */ +#include <linux/bitfield.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/phy.h> @@ -490,9 +491,50 @@ static int ksz9021_config_init(struct phy_device *phydev) /* MMD Address 0x2 */ #define MII_KSZ9031RN_CONTROL_PAD_SKEW 4 +#define MII_KSZ9031RN_RX_CTL_M GENMASK(7, 4) +#define MII_KSZ9031RN_TX_CTL_M GENMASK(3, 0) + #define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5 +#define MII_KSZ9031RN_RXD3 GENMASK(15, 12) +#define MII_KSZ9031RN_RXD2 GENMASK(11, 8) +#define MII_KSZ9031RN_RXD1 GENMASK(7, 4) +#define MII_KSZ9031RN_RXD0 GENMASK(3, 0) + #define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6 +#define MII_KSZ9031RN_TXD3 GENMASK(15, 12) +#define MII_KSZ9031RN_TXD2 GENMASK(11, 8) +#define MII_KSZ9031RN_TXD1 GENMASK(7, 4) +#define MII_KSZ9031RN_TXD0 GENMASK(3, 0) + #define MII_KSZ9031RN_CLK_PAD_SKEW 8 +#define MII_KSZ9031RN_GTX_CLK GENMASK(9, 5) +#define MII_KSZ9031RN_RX_CLK GENMASK(4, 0) + +/* KSZ9031 has internal RGMII_IDRX = 1.2ns and RGMII_IDTX = 0ns. To + * provide different RGMII options we need to configure delay offset + * for each pad relative to build in delay. + */ +/* keep rx as "No delay adjustment" and set rx_clk to +0.60ns to get delays of + * 1.80ns + */ +#define RX_ID 0x7 +#define RX_CLK_ID 0x19 + +/* set rx to +0.30ns and rx_clk to -0.90ns to compensate the + * internal 1.2ns delay. + */ +#define RX_ND 0xc +#define RX_CLK_ND 0x0 + +/* set tx to -0.42ns and tx_clk to +0.96ns to get 1.38ns delay */ +#define TX_ID 0x0 +#define TX_CLK_ID 0x1f + +/* set tx and tx_clk to "No delay adjustment" to keep 0ns + * dealy + */ +#define TX_ND 0x7 +#define TX_CLK_ND 0xf /* MMD Address 0x1C */ #define MII_KSZ9031RN_EDPD 0x23 @@ -501,7 +543,8 @@ static int ksz9021_config_init(struct phy_device *phydev) static int ksz9031_of_load_skew_values(struct phy_device *phydev, const struct device_node *of_node, u16 reg, size_t field_sz, - const char *field[], u8 numfields) + const char *field[], u8 numfields, + bool *update) { int val[4] = {-1, -2, -3, -4}; int matches = 0; @@ -517,6 +560,8 @@ static int ksz9031_of_load_skew_values(struct phy_device *phydev, if (!matches) return 0; + *update |= true; + if (matches < numfields) newval = phy_read_mmd(phydev, 2, reg); else @@ -565,6 +610,67 @@ static int ksz9031_enable_edpd(struct phy_device *phydev) reg | MII_KSZ9031RN_EDPD_ENABLE); } +static int ksz9031_config_rgmii_delay(struct phy_device *phydev) +{ + u16 rx, tx, rx_clk, tx_clk; + int ret; + + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + tx = TX_ND; + tx_clk = TX_CLK_ND; + rx = RX_ND; + rx_clk = RX_CLK_ND; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + tx = TX_ID; + tx_clk = TX_CLK_ID; + rx = RX_ID; + rx_clk = RX_CLK_ID; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + tx = TX_ND; + tx_clk = TX_CLK_ND; + rx = RX_ID; + rx_clk = RX_CLK_ID; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + tx = TX_ID; + tx_clk = TX_CLK_ID; + rx = RX_ND; + rx_clk = RX_CLK_ND; + break; + default: + return 0; + } + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_CONTROL_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_RX_CTL_M, rx) | + FIELD_PREP(MII_KSZ9031RN_TX_CTL_M, tx)); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_RX_DATA_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_RXD3, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD2, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD1, rx) | + FIELD_PREP(MII_KSZ9031RN_RXD0, rx)); + if (ret < 0) + return ret; + + ret = phy_write_mmd(phydev, 2, MII_KSZ9031RN_TX_DATA_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_TXD3, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD2, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD1, tx) | + FIELD_PREP(MII_KSZ9031RN_TXD0, tx)); + if (ret < 0) + return ret; + + return phy_write_mmd(phydev, 2, MII_KSZ9031RN_CLK_PAD_SKEW, + FIELD_PREP(MII_KSZ9031RN_GTX_CLK, tx_clk) | + FIELD_PREP(MII_KSZ9031RN_RX_CLK, rx_clk)); +} + static int ksz9031_config_init(struct phy_device *phydev) { const struct device *dev = &phydev->mdio.dev; @@ -597,21 +703,33 @@ static int ksz9031_config_init(struct phy_device *phydev) } while (!of_node && dev_walker); if (of_node) { + bool update = false; + + if (phy_interface_is_rgmii(phydev)) { + result = ksz9031_config_rgmii_delay(phydev); + if (result < 0) + return result; + } + ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_CLK_PAD_SKEW, 5, - clk_skews, 2); + clk_skews, 2, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_CONTROL_PAD_SKEW, 4, - control_skews, 2); + control_skews, 2, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4, - rx_data_skews, 4); + rx_data_skews, 4, &update); ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, - tx_data_skews, 4); + tx_data_skews, 4, &update); + + if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII) + phydev_warn(phydev, + "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n"); /* Silicon Errata Sheet (DS80000691D or DS80000692D): * When the device links in the 1000BASE-T slave mode only, diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h index 030bf8b600df..f828c917b9f7 100644 --- a/drivers/net/phy/mscc/mscc.h +++ b/drivers/net/phy/mscc/mscc.h @@ -353,7 +353,8 @@ struct vsc8531_private { const struct vsc85xx_hw_stat *hw_stats; u64 *stats; int nstats; - bool pkg_init; + /* PHY address within the package. */ + u8 addr; /* For multiple port PHYs; the MDIO address of the base PHY in the * package. */ diff --git a/drivers/net/phy/mscc/mscc_mac.h b/drivers/net/phy/mscc/mscc_mac.h index fcb5ba5e5d03..59b6837c60b3 100644 --- a/drivers/net/phy/mscc/mscc_mac.h +++ b/drivers/net/phy/mscc/mscc_mac.h @@ -152,8 +152,8 @@ #define MSCC_MAC_PAUSE_CFG_STATE_PAUSE_STATE BIT(0) #define MSCC_MAC_PAUSE_CFG_STATE_MAC_TX_PAUSE_GEN BIT(4) -#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL 0x2 -#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(x) (x) -#define MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M GENMASK(2, 0) +#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL 0x2 +#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(x) (x) +#define MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M GENMASK(2, 0) #endif /* _MSCC_PHY_LINE_MAC_H_ */ diff --git a/drivers/net/phy/mscc/mscc_macsec.c b/drivers/net/phy/mscc/mscc_macsec.c index e99e2cd72a0c..b4d3dc4068e2 100644 --- a/drivers/net/phy/mscc/mscc_macsec.c +++ b/drivers/net/phy/mscc/mscc_macsec.c @@ -316,6 +316,8 @@ static void vsc8584_macsec_mac_init(struct phy_device *phydev, /* Must be called with mdio_lock taken */ static int __vsc8584_macsec_init(struct phy_device *phydev) { + struct vsc8531_private *priv = phydev->priv; + enum macsec_bank proc_bank; u32 val; vsc8584_macsec_block_init(phydev, MACSEC_INGR); @@ -351,12 +353,14 @@ static int __vsc8584_macsec_init(struct phy_device *phydev) val |= MSCC_FCBUF_ENA_CFG_TX_ENA | MSCC_FCBUF_ENA_CFG_RX_ENA; vsc8584_macsec_phy_write(phydev, FC_BUFFER, MSCC_FCBUF_ENA_CFG, val); - val = vsc8584_macsec_phy_read(phydev, IP_1588, - MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL); - val &= ~MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M; - val |= MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(4); - vsc8584_macsec_phy_write(phydev, IP_1588, - MSCC_PROC_0_IP_1588_TOP_CFG_STAT_MODE_CTL, val); + proc_bank = (priv->addr < 2) ? PROC_0 : PROC_2; + + val = vsc8584_macsec_phy_read(phydev, proc_bank, + MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL); + val &= ~MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE_M; + val |= MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL_PROTOCOL_MODE(4); + vsc8584_macsec_phy_write(phydev, proc_bank, + MSCC_PROC_IP_1588_TOP_CFG_STAT_MODE_CTL, val); return 0; } diff --git a/drivers/net/phy/mscc/mscc_macsec.h b/drivers/net/phy/mscc/mscc_macsec.h index d0783944d106..d751f2946b79 100644 --- a/drivers/net/phy/mscc/mscc_macsec.h +++ b/drivers/net/phy/mscc/mscc_macsec.h @@ -64,7 +64,8 @@ enum macsec_bank { FC_BUFFER = 0x04, HOST_MAC = 0x05, LINE_MAC = 0x06, - IP_1588 = 0x0e, + PROC_0 = 0x0e, + PROC_2 = 0x0f, MACSEC_INGR = 0x38, MACSEC_EGR = 0x3c, }; diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c index acddef79f4e8..7ed0285206d0 100644 --- a/drivers/net/phy/mscc/mscc_main.c +++ b/drivers/net/phy/mscc/mscc_main.c @@ -691,27 +691,23 @@ out_unlock: /* phydev->bus->mdio_lock should be locked when using this function */ static int phy_base_write(struct phy_device *phydev, u32 regnum, u16 val) { - struct vsc8531_private *priv = phydev->priv; - if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) { dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n"); dump_stack(); } - return __mdiobus_write(phydev->mdio.bus, priv->base_addr, regnum, val); + return __phy_package_write(phydev, regnum, val); } /* phydev->bus->mdio_lock should be locked when using this function */ static int phy_base_read(struct phy_device *phydev, u32 regnum) { - struct vsc8531_private *priv = phydev->priv; - if (unlikely(!mutex_is_locked(&phydev->mdio.bus->mdio_lock))) { dev_err(&phydev->mdio.dev, "MDIO bus lock not held!\n"); dump_stack(); } - return __mdiobus_read(phydev->mdio.bus, priv->base_addr, regnum); + return __phy_package_read(phydev, regnum); } /* bus->mdio_lock should be locked when using this function */ @@ -1287,66 +1283,40 @@ out: return ret; } -/* Check if one PHY has already done the init of the parts common to all PHYs - * in the Quad PHY package. - */ -static bool vsc8584_is_pkg_init(struct phy_device *phydev, bool reversed) +static void vsc8584_get_base_addr(struct phy_device *phydev) { - struct mdio_device **map = phydev->mdio.bus->mdio_map; - struct vsc8531_private *vsc8531; - struct phy_device *phy; - int i, addr; - - /* VSC8584 is a Quad PHY */ - for (i = 0; i < 4; i++) { - vsc8531 = phydev->priv; - - if (reversed) - addr = vsc8531->base_addr - i; - else - addr = vsc8531->base_addr + i; + struct vsc8531_private *vsc8531 = phydev->priv; + u16 val, addr; - if (!map[addr]) - continue; + mutex_lock(&phydev->mdio.bus->mdio_lock); + __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); - phy = container_of(map[addr], struct phy_device, mdio); + addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4); + addr >>= PHY_CNTL_4_ADDR_POS; - if ((phy->phy_id & phydev->drv->phy_id_mask) != - (phydev->drv->phy_id & phydev->drv->phy_id_mask)) - continue; + val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL); - vsc8531 = phy->priv; + __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_STANDARD); + mutex_unlock(&phydev->mdio.bus->mdio_lock); - if (vsc8531 && vsc8531->pkg_init) - return true; - } + if (val & PHY_ADDR_REVERSED) + vsc8531->base_addr = phydev->mdio.addr + addr; + else + vsc8531->base_addr = phydev->mdio.addr - addr; - return false; + vsc8531->addr = addr; } static int vsc8584_config_init(struct phy_device *phydev) { struct vsc8531_private *vsc8531 = phydev->priv; - u16 addr, val; int ret, i; + u16 val; phydev->mdix_ctrl = ETH_TP_MDI_AUTO; mutex_lock(&phydev->mdio.bus->mdio_lock); - __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, - MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); - addr = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, - MSCC_PHY_EXT_PHY_CNTL_4); - addr >>= PHY_CNTL_4_ADDR_POS; - - val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, - MSCC_PHY_ACTIPHY_CNTL); - if (val & PHY_ADDR_REVERSED) - vsc8531->base_addr = phydev->mdio.addr + addr; - else - vsc8531->base_addr = phydev->mdio.addr - addr; - /* Some parts of the init sequence are identical for every PHY in the * package. Some parts are modifying the GPIO register bank which is a * set of registers that are affecting all PHYs, a few resetting the @@ -1360,7 +1330,7 @@ static int vsc8584_config_init(struct phy_device *phydev) * do the correct init sequence for all PHYs that are package-critical * in this pre-init function. */ - if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0)) { + if (phy_package_init_once(phydev)) { /* The following switch statement assumes that the lowest * nibble of the phy_id_mask is always 0. This works because * the lowest nibble of the PHY_ID's below are also 0. @@ -1389,8 +1359,6 @@ static int vsc8584_config_init(struct phy_device *phydev) goto err; } - vsc8531->pkg_init = true; - phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_GPIO); @@ -1428,7 +1396,8 @@ static int vsc8584_config_init(struct phy_device *phydev) /* Disable SerDes for 100Base-FX */ ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | - PROC_CMD_FIBER_PORT(addr) | PROC_CMD_FIBER_DISABLE | + PROC_CMD_FIBER_PORT(vsc8531->base_addr) | + PROC_CMD_FIBER_DISABLE | PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_100BASE_FX); if (ret) @@ -1436,7 +1405,8 @@ static int vsc8584_config_init(struct phy_device *phydev) /* Disable SerDes for 1000Base-X */ ret = vsc8584_cmd(phydev, PROC_CMD_FIBER_MEDIA_CONF | - PROC_CMD_FIBER_PORT(addr) | PROC_CMD_FIBER_DISABLE | + PROC_CMD_FIBER_PORT(vsc8531->base_addr) | + PROC_CMD_FIBER_DISABLE | PROC_CMD_READ_MOD_WRITE_PORT | PROC_CMD_RST_CONF_PORT | PROC_CMD_FIBER_1000BASE_X); if (ret) @@ -1751,26 +1721,14 @@ static int vsc8514_config_init(struct phy_device *phydev) { struct vsc8531_private *vsc8531 = phydev->priv; unsigned long deadline; - u16 val, addr; int ret, i; + u16 val; u32 reg; phydev->mdix_ctrl = ETH_TP_MDI_AUTO; mutex_lock(&phydev->mdio.bus->mdio_lock); - __phy_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED); - - addr = __phy_read(phydev, MSCC_PHY_EXT_PHY_CNTL_4); - addr >>= PHY_CNTL_4_ADDR_POS; - - val = __phy_read(phydev, MSCC_PHY_ACTIPHY_CNTL); - - if (val & PHY_ADDR_REVERSED) - vsc8531->base_addr = phydev->mdio.addr + addr; - else - vsc8531->base_addr = phydev->mdio.addr - addr; - /* Some parts of the init sequence are identical for every PHY in the * package. Some parts are modifying the GPIO register bank which is a * set of registers that are affecting all PHYs, a few resetting the @@ -1782,11 +1740,9 @@ static int vsc8514_config_init(struct phy_device *phydev) * do the correct init sequence for all PHYs that are package-critical * in this pre-init function. */ - if (!vsc8584_is_pkg_init(phydev, val & PHY_ADDR_REVERSED ? 1 : 0)) + if (phy_package_init_once(phydev)) vsc8514_config_pre_init(phydev); - vsc8531->pkg_init = true; - phy_base_write(phydev, MSCC_EXT_PAGE_ACCESS, MSCC_PHY_PAGE_EXTENDED_GPIO); @@ -1992,6 +1948,10 @@ static int vsc8514_probe(struct phy_device *phydev) phydev->priv = vsc8531; + vsc8584_get_base_addr(phydev); + devm_phy_package_join(&phydev->mdio.dev, phydev, + vsc8531->base_addr, 0); + vsc8531->nleds = 4; vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES; vsc8531->hw_stats = vsc85xx_hw_stats; @@ -2017,6 +1977,10 @@ static int vsc8574_probe(struct phy_device *phydev) phydev->priv = vsc8531; + vsc8584_get_base_addr(phydev); + devm_phy_package_join(&phydev->mdio.dev, phydev, + vsc8531->base_addr, 0); + vsc8531->nleds = 4; vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; vsc8531->hw_stats = vsc8584_hw_stats; @@ -2047,6 +2011,10 @@ static int vsc8584_probe(struct phy_device *phydev) phydev->priv = vsc8531; + vsc8584_get_base_addr(phydev); + devm_phy_package_join(&phydev->mdio.dev, phydev, + vsc8531->base_addr, 0); + vsc8531->nleds = 4; vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; vsc8531->hw_stats = vsc8584_hw_stats; diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c index 47caae770ffc..a72fa0d2e7c7 100644 --- a/drivers/net/phy/nxp-tja11xx.c +++ b/drivers/net/phy/nxp-tja11xx.c @@ -5,16 +5,21 @@ */ #include <linux/delay.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #include <linux/kernel.h> +#include <linux/mdio.h> #include <linux/mii.h> #include <linux/module.h> #include <linux/phy.h> #include <linux/hwmon.h> #include <linux/bitfield.h> +#include <linux/of_mdio.h> +#include <linux/of_irq.h> #define PHY_ID_MASK 0xfffffff0 #define PHY_ID_TJA1100 0x0180dc40 #define PHY_ID_TJA1101 0x0180dd00 +#define PHY_ID_TJA1102 0x0180dc80 #define MII_ECTRL 17 #define MII_ECTRL_LINK_CONTROL BIT(15) @@ -22,10 +27,12 @@ #define MII_ECTRL_POWER_MODE_NO_CHANGE (0x0 << 11) #define MII_ECTRL_POWER_MODE_NORMAL (0x3 << 11) #define MII_ECTRL_POWER_MODE_STANDBY (0xc << 11) +#define MII_ECTRL_CABLE_TEST BIT(5) #define MII_ECTRL_CONFIG_EN BIT(2) #define MII_ECTRL_WAKE_REQUEST BIT(0) #define MII_CFG1 18 +#define MII_CFG1_MASTER_SLAVE BIT(15) #define MII_CFG1_AUTO_OP BIT(14) #define MII_CFG1_SLEEP_CONFIRM BIT(6) #define MII_CFG1_LED_MODE_MASK GENMASK(5, 4) @@ -40,18 +47,31 @@ #define MII_INTSRC_TEMP_ERR BIT(1) #define MII_INTSRC_UV_ERR BIT(3) +#define MII_INTEN 22 +#define MII_INTEN_LINK_FAIL BIT(10) +#define MII_INTEN_LINK_UP BIT(9) + #define MII_COMMSTAT 23 #define MII_COMMSTAT_LINK_UP BIT(15) +#define MII_COMMSTAT_SQI_STATE GENMASK(7, 5) +#define MII_COMMSTAT_SQI_MAX 7 #define MII_GENSTAT 24 #define MII_GENSTAT_PLL_LOCKED BIT(14) +#define MII_EXTSTAT 25 +#define MII_EXTSTAT_SHORT_DETECT BIT(8) +#define MII_EXTSTAT_OPEN_DETECT BIT(7) +#define MII_EXTSTAT_POLARITY_DETECT BIT(6) + #define MII_COMMCFG 27 #define MII_COMMCFG_AUTO_OP BIT(15) struct tja11xx_priv { char *hwmon_name; struct device *hwmon_dev; + struct phy_device *phydev; + struct work_struct phy_register_work; }; struct tja11xx_phy_stats { @@ -100,6 +120,11 @@ static int tja11xx_enable_link_control(struct phy_device *phydev) return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL); } +static int tja11xx_disable_link_control(struct phy_device *phydev) +{ + return phy_clear_bits(phydev, MII_ECTRL, MII_ECTRL_LINK_CONTROL); +} + static int tja11xx_wakeup(struct phy_device *phydev) { int ret; @@ -157,6 +182,70 @@ static int tja11xx_soft_reset(struct phy_device *phydev) return genphy_soft_reset(phydev); } +static int tja11xx_config_aneg_cable_test(struct phy_device *phydev) +{ + bool finished = false; + int ret; + + if (phydev->link) + return 0; + + if (!phydev->drv->cable_test_start || + !phydev->drv->cable_test_get_status) + return 0; + + ret = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF); + if (ret) + return ret; + + ret = phydev->drv->cable_test_start(phydev); + if (ret) + return ret; + + /* According to the documentation this test takes 100 usec */ + usleep_range(100, 200); + + ret = phydev->drv->cable_test_get_status(phydev, &finished); + if (ret) + return ret; + + if (finished) + ethnl_cable_test_finished(phydev); + + return 0; +} + +static int tja11xx_config_aneg(struct phy_device *phydev) +{ + int ret, changed = 0; + u16 ctl = 0; + + switch (phydev->master_slave_set) { + case MASTER_SLAVE_CFG_MASTER_FORCE: + ctl |= MII_CFG1_MASTER_SLAVE; + break; + case MASTER_SLAVE_CFG_SLAVE_FORCE: + break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + goto do_test; + default: + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -ENOTSUPP; + } + + changed = phy_modify_changed(phydev, MII_CFG1, MII_CFG1_MASTER_SLAVE, ctl); + if (changed < 0) + return changed; + +do_test: + ret = tja11xx_config_aneg_cable_test(phydev); + if (ret) + return ret; + + return __genphy_config_aneg(phydev, changed); +} + static int tja11xx_config_init(struct phy_device *phydev) { int ret; @@ -180,6 +269,7 @@ static int tja11xx_config_init(struct phy_device *phydev) return ret; break; case PHY_ID_TJA1101: + case PHY_ID_TJA1102: ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); if (ret) return ret; @@ -213,10 +303,22 @@ static int tja11xx_read_status(struct phy_device *phydev) { int ret; + phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; + ret = genphy_update_link(phydev); if (ret) return ret; + ret = phy_read(phydev, MII_CFG1); + if (ret < 0) + return ret; + + if (ret & MII_CFG1_MASTER_SLAVE) + phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE; + else + phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE; + if (phydev->link) { ret = phy_read(phydev, MII_COMMSTAT); if (ret < 0) @@ -229,6 +331,22 @@ static int tja11xx_read_status(struct phy_device *phydev) return 0; } +static int tja11xx_get_sqi(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_COMMSTAT); + if (ret < 0) + return ret; + + return FIELD_GET(MII_COMMSTAT_SQI_STATE, ret); +} + +static int tja11xx_get_sqi_max(struct phy_device *phydev) +{ + return MII_COMMSTAT_SQI_MAX; +} + static int tja11xx_get_sset_count(struct phy_device *phydev) { return ARRAY_SIZE(tja11xx_hw_stats); @@ -317,16 +435,12 @@ static const struct hwmon_chip_info tja11xx_hwmon_chip_info = { .info = tja11xx_hwmon_info, }; -static int tja11xx_probe(struct phy_device *phydev) +static int tja11xx_hwmon_register(struct phy_device *phydev, + struct tja11xx_priv *priv) { struct device *dev = &phydev->mdio.dev; - struct tja11xx_priv *priv; int i; - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL); if (!priv->hwmon_name) return -ENOMEM; @@ -344,6 +458,239 @@ static int tja11xx_probe(struct phy_device *phydev) return PTR_ERR_OR_ZERO(priv->hwmon_dev); } +static int tja11xx_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct tja11xx_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phydev = phydev; + + return tja11xx_hwmon_register(phydev, priv); +} + +static void tja1102_p1_register(struct work_struct *work) +{ + struct tja11xx_priv *priv = container_of(work, struct tja11xx_priv, + phy_register_work); + struct phy_device *phydev_phy0 = priv->phydev; + struct mii_bus *bus = phydev_phy0->mdio.bus; + struct device *dev = &phydev_phy0->mdio.dev; + struct device_node *np = dev->of_node; + struct device_node *child; + int ret; + + for_each_available_child_of_node(np, child) { + struct phy_device *phy; + int addr; + + addr = of_mdio_parse_addr(dev, child); + if (addr < 0) { + dev_err(dev, "Can't parse addr\n"); + continue; + } else if (addr != phydev_phy0->mdio.addr + 1) { + /* Currently we care only about double PHY chip TJA1102. + * If some day NXP will decide to bring chips with more + * PHYs, this logic should be reworked. + */ + dev_err(dev, "Unexpected address. Should be: %i\n", + phydev_phy0->mdio.addr + 1); + continue; + } + + if (mdiobus_is_registered_device(bus, addr)) { + dev_err(dev, "device is already registered\n"); + continue; + } + + /* Real PHY ID of Port 1 is 0 */ + phy = phy_device_create(bus, addr, PHY_ID_TJA1102, false, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "Can't create PHY device for Port 1: %i\n", + addr); + continue; + } + + /* Overwrite parent device. phy_device_create() set parent to + * the mii_bus->dev, which is not correct in case. + */ + phy->mdio.dev.parent = dev; + + ret = of_mdiobus_phy_device_register(bus, phy, child, addr); + if (ret) { + /* All resources needed for Port 1 should be already + * available for Port 0. Both ports use the same + * interrupt line, so -EPROBE_DEFER would make no sense + * here. + */ + dev_err(dev, "Can't register Port 1. Unexpected error: %i\n", + ret); + phy_device_free(phy); + } + } +} + +static int tja1102_p0_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct tja11xx_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phydev = phydev; + INIT_WORK(&priv->phy_register_work, tja1102_p1_register); + + ret = tja11xx_hwmon_register(phydev, priv); + if (ret) + return ret; + + schedule_work(&priv->phy_register_work); + + return 0; +} + +static int tja1102_match_phy_device(struct phy_device *phydev, bool port0) +{ + int ret; + + if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102) + return 0; + + ret = phy_read(phydev, MII_PHYSID2); + if (ret < 0) + return ret; + + /* TJA1102 Port 1 has phyid 0 and doesn't support temperature + * and undervoltage alarms. + */ + if (port0) + return ret ? 1 : 0; + + return !ret; +} + +static int tja1102_p0_match_phy_device(struct phy_device *phydev) +{ + return tja1102_match_phy_device(phydev, true); +} + +static int tja1102_p1_match_phy_device(struct phy_device *phydev) +{ + return tja1102_match_phy_device(phydev, false); +} + +static int tja11xx_ack_interrupt(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_INTSRC); + + return (ret < 0) ? ret : 0; +} + +static int tja11xx_config_intr(struct phy_device *phydev) +{ + int value = 0; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + value = MII_INTEN_LINK_FAIL | MII_INTEN_LINK_UP; + + return phy_write(phydev, MII_INTEN, value); +} + +static int tja11xx_cable_test_start(struct phy_device *phydev) +{ + int ret; + + ret = phy_clear_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); + if (ret) + return ret; + + ret = tja11xx_wakeup(phydev); + if (ret < 0) + return ret; + + ret = tja11xx_disable_link_control(phydev); + if (ret < 0) + return ret; + + return phy_set_bits(phydev, MII_ECTRL, MII_ECTRL_CABLE_TEST); +} + +/* + * | BI_DA+ | BI_DA- | Result + * | open | open | open + * | + short to - | - short to + | short + * | short to Vdd | open | open + * | open | shot to Vdd | open + * | short to Vdd | short to Vdd | short + * | shot to GND | open | open + * | open | shot to GND | open + * | short to GND | shot to GND | short + * | connected to active link partner (master) | shot and open + */ +static int tja11xx_cable_test_report_trans(u32 result) +{ + u32 mask = MII_EXTSTAT_SHORT_DETECT | MII_EXTSTAT_OPEN_DETECT; + + if ((result & mask) == mask) { + /* connected to active link partner (master) */ + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } else if ((result & mask) == 0) { + return ETHTOOL_A_CABLE_RESULT_CODE_OK; + } else if (result & MII_EXTSTAT_SHORT_DETECT) { + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; + } else if (result & MII_EXTSTAT_OPEN_DETECT) { + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; + } else { + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } +} + +static int tja11xx_cable_test_report(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_EXTSTAT); + if (ret < 0) + return ret; + + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, + tja11xx_cable_test_report_trans(ret)); + + return 0; +} + +static int tja11xx_cable_test_get_status(struct phy_device *phydev, + bool *finished) +{ + int ret; + + *finished = false; + + ret = phy_read(phydev, MII_ECTRL); + if (ret < 0) + return ret; + + if (!(ret & MII_ECTRL_CABLE_TEST)) { + *finished = true; + + ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP); + if (ret) + return ret; + + return tja11xx_cable_test_report(phydev); + } + + return 0; +} + static struct phy_driver tja11xx_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100), @@ -351,8 +698,11 @@ static struct phy_driver tja11xx_driver[] = { .features = PHY_BASIC_T1_FEATURES, .probe = tja11xx_probe, .soft_reset = tja11xx_soft_reset, + .config_aneg = tja11xx_config_aneg, .config_init = tja11xx_config_init, .read_status = tja11xx_read_status, + .get_sqi = tja11xx_get_sqi, + .get_sqi_max = tja11xx_get_sqi_max, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, @@ -366,8 +716,53 @@ static struct phy_driver tja11xx_driver[] = { .features = PHY_BASIC_T1_FEATURES, .probe = tja11xx_probe, .soft_reset = tja11xx_soft_reset, + .config_aneg = tja11xx_config_aneg, + .config_init = tja11xx_config_init, + .read_status = tja11xx_read_status, + .get_sqi = tja11xx_get_sqi, + .get_sqi_max = tja11xx_get_sqi_max, + .suspend = genphy_suspend, + .resume = genphy_resume, + .set_loopback = genphy_loopback, + /* Statistics */ + .get_sset_count = tja11xx_get_sset_count, + .get_strings = tja11xx_get_strings, + .get_stats = tja11xx_get_stats, + }, { + .name = "NXP TJA1102 Port 0", + .features = PHY_BASIC_T1_FEATURES, + .flags = PHY_POLL_CABLE_TEST, + .probe = tja1102_p0_probe, + .soft_reset = tja11xx_soft_reset, + .config_aneg = tja11xx_config_aneg, + .config_init = tja11xx_config_init, + .read_status = tja11xx_read_status, + .get_sqi = tja11xx_get_sqi, + .get_sqi_max = tja11xx_get_sqi_max, + .match_phy_device = tja1102_p0_match_phy_device, + .suspend = genphy_suspend, + .resume = genphy_resume, + .set_loopback = genphy_loopback, + /* Statistics */ + .get_sset_count = tja11xx_get_sset_count, + .get_strings = tja11xx_get_strings, + .get_stats = tja11xx_get_stats, + .ack_interrupt = tja11xx_ack_interrupt, + .config_intr = tja11xx_config_intr, + .cable_test_start = tja11xx_cable_test_start, + .cable_test_get_status = tja11xx_cable_test_get_status, + }, { + .name = "NXP TJA1102 Port 1", + .features = PHY_BASIC_T1_FEATURES, + .flags = PHY_POLL_CABLE_TEST, + /* currently no probe for Port 1 is need */ + .soft_reset = tja11xx_soft_reset, + .config_aneg = tja11xx_config_aneg, .config_init = tja11xx_config_init, .read_status = tja11xx_read_status, + .get_sqi = tja11xx_get_sqi, + .get_sqi_max = tja11xx_get_sqi_max, + .match_phy_device = tja1102_p1_match_phy_device, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, @@ -375,6 +770,10 @@ static struct phy_driver tja11xx_driver[] = { .get_sset_count = tja11xx_get_sset_count, .get_strings = tja11xx_get_strings, .get_stats = tja11xx_get_stats, + .ack_interrupt = tja11xx_ack_interrupt, + .config_intr = tja11xx_config_intr, + .cable_test_start = tja11xx_cable_test_start, + .cable_test_get_status = tja11xx_cable_test_get_status, } }; @@ -383,6 +782,7 @@ module_phy_driver(tja11xx_driver); static struct mdio_device_id __maybe_unused tja11xx_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) }, { PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) }, + { PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) }, { } }; diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 67ba47ae5284..defe09d94422 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -564,6 +564,5 @@ struct phy_driver genphy_c45_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic Clause 45 PHY", - .soft_reset = genphy_no_soft_reset, .read_status = genphy_c45_read_status, }; diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 66b8c61ca74c..46bd68e9ecfa 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -428,9 +428,8 @@ int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) if (phydev->drv && phydev->drv->read_mmd) { val = phydev->drv->read_mmd(phydev, devad, regnum); } else if (phydev->is_c45) { - u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); - - val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr); + val = __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr, + devad, regnum); } else { struct mii_bus *bus = phydev->mdio.bus; int phy_addr = phydev->mdio.addr; @@ -485,10 +484,8 @@ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) if (phydev->drv && phydev->drv->write_mmd) { ret = phydev->drv->write_mmd(phydev, devad, regnum, val); } else if (phydev->is_c45) { - u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff); - - ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, - addr, val); + ret = __mdiobus_c45_write(phydev->mdio.bus, phydev->mdio.addr, + devad, regnum, val); } else { struct mii_bus *bus = phydev->mdio.bus; int phy_addr = phydev->mdio.addr; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 72c69a9c8a98..1de3938628f4 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -15,12 +15,14 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/netdevice.h> +#include <linux/netlink.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/mii.h> #include <linux/ethtool.h> +#include <linux/ethtool_netlink.h> #include <linux/phy.h> #include <linux/phy_led_triggers.h> #include <linux/sfp.h> @@ -29,6 +31,9 @@ #include <linux/io.h> #include <linux/uaccess.h> #include <linux/atomic.h> +#include <net/netlink.h> +#include <net/genetlink.h> +#include <net/sock.h> #define PHY_STATE_TIME HZ @@ -44,6 +49,7 @@ static const char *phy_state_to_str(enum phy_state st) PHY_STATE_STR(UP) PHY_STATE_STR(RUNNING) PHY_STATE_STR(NOLINK) + PHY_STATE_STR(CABLETEST) PHY_STATE_STR(HALTED) } @@ -52,13 +58,13 @@ static const char *phy_state_to_str(enum phy_state st) static void phy_link_up(struct phy_device *phydev) { - phydev->phy_link_change(phydev, true, true); + phydev->phy_link_change(phydev, true); phy_led_trigger_change_speed(phydev); } -static void phy_link_down(struct phy_device *phydev, bool do_carrier) +static void phy_link_down(struct phy_device *phydev) { - phydev->phy_link_change(phydev, false, do_carrier); + phydev->phy_link_change(phydev, false); phy_led_trigger_change_speed(phydev); } @@ -295,7 +301,7 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, phydev->advertising, autoneg == AUTONEG_ENABLE); phydev->duplex = duplex; - + phydev->master_slave_set = cmd->base.master_slave_cfg; phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; /* Restart the PHY */ @@ -314,6 +320,8 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev, cmd->base.speed = phydev->speed; cmd->base.duplex = phydev->duplex; + cmd->base.master_slave_cfg = phydev->master_slave_get; + cmd->base.master_slave_state = phydev->master_slave_state; if (phydev->interface == PHY_INTERFACE_MODE_MOCA) cmd->base.port = PORT_BNC; else @@ -353,7 +361,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) if (mdio_phy_id_is_c45(mii_data->phy_id)) { prtad = mdio_phy_id_prtad(mii_data->phy_id); devad = mdio_phy_id_devad(mii_data->phy_id); - devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num; + devad = mdiobus_c45_addr(devad, mii_data->reg_num); } else { prtad = mii_data->phy_id; devad = mii_data->reg_num; @@ -366,7 +374,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd) if (mdio_phy_id_is_c45(mii_data->phy_id)) { prtad = mdio_phy_id_prtad(mii_data->phy_id); devad = mdio_phy_id_devad(mii_data->phy_id); - devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num; + devad = mdiobus_c45_addr(devad, mii_data->reg_num); } else { prtad = mii_data->phy_id; devad = mii_data->reg_num; @@ -470,6 +478,144 @@ static void phy_trigger_machine(struct phy_device *phydev) phy_queue_state_machine(phydev, 0); } +static void phy_abort_cable_test(struct phy_device *phydev) +{ + int err; + + ethnl_cable_test_finished(phydev); + + err = phy_init_hw(phydev); + if (err) + phydev_err(phydev, "Error while aborting cable test"); +} + +int phy_start_cable_test(struct phy_device *phydev, + struct netlink_ext_ack *extack) +{ + struct net_device *dev = phydev->attached_dev; + int err = -ENOMEM; + + if (!(phydev->drv && + phydev->drv->cable_test_start && + phydev->drv->cable_test_get_status)) { + NL_SET_ERR_MSG(extack, + "PHY driver does not support cable testing"); + return -EOPNOTSUPP; + } + + mutex_lock(&phydev->lock); + if (phydev->state == PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY already performing a test"); + err = -EBUSY; + goto out; + } + + if (phydev->state < PHY_UP || + phydev->state > PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY not configured. Try setting interface up"); + err = -EBUSY; + goto out; + } + + err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_NTF); + if (err) + goto out; + + /* Mark the carrier down until the test is complete */ + phy_link_down(phydev); + + netif_testing_on(dev); + err = phydev->drv->cable_test_start(phydev); + if (err) { + netif_testing_off(dev); + phy_link_up(phydev); + goto out_free; + } + + phydev->state = PHY_CABLETEST; + + if (phy_polling_mode(phydev)) + phy_trigger_machine(phydev); + + mutex_unlock(&phydev->lock); + + return 0; + +out_free: + ethnl_cable_test_free(phydev); +out: + mutex_unlock(&phydev->lock); + + return err; +} +EXPORT_SYMBOL(phy_start_cable_test); + +int phy_start_cable_test_tdr(struct phy_device *phydev, + struct netlink_ext_ack *extack, + const struct phy_tdr_config *config) +{ + struct net_device *dev = phydev->attached_dev; + int err = -ENOMEM; + + if (!(phydev->drv && + phydev->drv->cable_test_tdr_start && + phydev->drv->cable_test_get_status)) { + NL_SET_ERR_MSG(extack, + "PHY driver does not support cable test TDR"); + return -EOPNOTSUPP; + } + + mutex_lock(&phydev->lock); + if (phydev->state == PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY already performing a test"); + err = -EBUSY; + goto out; + } + + if (phydev->state < PHY_UP || + phydev->state > PHY_CABLETEST) { + NL_SET_ERR_MSG(extack, + "PHY not configured. Try setting interface up"); + err = -EBUSY; + goto out; + } + + err = ethnl_cable_test_alloc(phydev, ETHTOOL_MSG_CABLE_TEST_TDR_NTF); + if (err) + goto out; + + /* Mark the carrier down until the test is complete */ + phy_link_down(phydev); + + netif_testing_on(dev); + err = phydev->drv->cable_test_tdr_start(phydev, config); + if (err) { + netif_testing_off(dev); + phy_link_up(phydev); + goto out_free; + } + + phydev->state = PHY_CABLETEST; + + if (phy_polling_mode(phydev)) + phy_trigger_machine(phydev); + + mutex_unlock(&phydev->lock); + + return 0; + +out_free: + ethnl_cable_test_free(phydev); +out: + mutex_unlock(&phydev->lock); + + return err; +} +EXPORT_SYMBOL(phy_start_cable_test_tdr); + static int phy_config_aneg(struct phy_device *phydev) { if (phydev->drv->config_aneg) @@ -513,7 +659,7 @@ static int phy_check_link_status(struct phy_device *phydev) phy_link_up(phydev); } else if (!phydev->link && phydev->state != PHY_NOLINK) { phydev->state = PHY_NOLINK; - phy_link_down(phydev, true); + phy_link_down(phydev); } return 0; @@ -800,6 +946,8 @@ EXPORT_SYMBOL(phy_free_interrupt); */ void phy_stop(struct phy_device *phydev) { + struct net_device *dev = phydev->attached_dev; + if (!phy_is_started(phydev)) { WARN(1, "called from state %s\n", phy_state_to_str(phydev->state)); @@ -808,6 +956,11 @@ void phy_stop(struct phy_device *phydev) mutex_lock(&phydev->lock); + if (phydev->state == PHY_CABLETEST) { + phy_abort_cable_test(phydev); + netif_testing_off(dev); + } + if (phydev->sfp_bus) sfp_upstream_stop(phydev->sfp_bus); @@ -868,8 +1021,10 @@ void phy_state_machine(struct work_struct *work) struct delayed_work *dwork = to_delayed_work(work); struct phy_device *phydev = container_of(dwork, struct phy_device, state_queue); + struct net_device *dev = phydev->attached_dev; bool needs_aneg = false, do_suspend = false; enum phy_state old_state; + bool finished = false; int err = 0; mutex_lock(&phydev->lock); @@ -888,10 +1043,27 @@ void phy_state_machine(struct work_struct *work) case PHY_RUNNING: err = phy_check_link_status(phydev); break; + case PHY_CABLETEST: + err = phydev->drv->cable_test_get_status(phydev, &finished); + if (err) { + phy_abort_cable_test(phydev); + netif_testing_off(dev); + needs_aneg = true; + phydev->state = PHY_UP; + break; + } + + if (finished) { + ethnl_cable_test_finished(phydev); + netif_testing_off(dev); + needs_aneg = true; + phydev->state = PHY_UP; + } + break; case PHY_HALTED: if (phydev->link) { phydev->link = 0; - phy_link_down(phydev, true); + phy_link_down(phydev); } do_suspend = true; break; @@ -1132,9 +1304,11 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) /* Restart autonegotiation so the new modes get sent to the * link partner. */ - ret = phy_restart_aneg(phydev); - if (ret < 0) - return ret; + if (phydev->autoneg == AUTONEG_ENABLE) { + ret = phy_restart_aneg(phydev); + if (ret < 0) + return ret; + } } return 0; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index ac2784192472..04946de74fa0 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -675,16 +675,14 @@ EXPORT_SYMBOL(phy_device_create); static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, u32 *devices_in_package) { - int phy_reg, reg_addr; + int phy_reg; - reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2; - phy_reg = mdiobus_read(bus, addr, reg_addr); + phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS2); if (phy_reg < 0) return -EIO; *devices_in_package = phy_reg << 16; - reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1; - phy_reg = mdiobus_read(bus, addr, reg_addr); + phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS1); if (phy_reg < 0) return -EIO; *devices_in_package |= phy_reg; @@ -709,11 +707,11 @@ static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr, * */ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, - struct phy_c45_device_ids *c45_ids) { - int phy_reg; - int i, reg_addr; + struct phy_c45_device_ids *c45_ids) +{ const int num_ids = ARRAY_SIZE(c45_ids->device_ids); u32 *devs = &c45_ids->devices_in_package; + int i, phy_reg; /* Find first non-zero Devices In package. Device zero is reserved * for 802.3 c45 complied PHYs, so don't probe it at first. @@ -747,14 +745,12 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, if (!(c45_ids->devices_in_package & (1 << i))) continue; - reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1; - phy_reg = mdiobus_read(bus, addr, reg_addr); + phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1); if (phy_reg < 0) return -EIO; c45_ids->device_ids[i] = phy_reg << 16; - reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2; - phy_reg = mdiobus_read(bus, addr, reg_addr); + phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID2); if (phy_reg < 0) return -EIO; c45_ids->device_ids[i] |= phy_reg; @@ -916,16 +912,14 @@ struct phy_device *phy_find_first(struct mii_bus *bus) } EXPORT_SYMBOL(phy_find_first); -static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) +static void phy_link_change(struct phy_device *phydev, bool up) { struct net_device *netdev = phydev->attached_dev; - if (do_carrier) { - if (up) - netif_carrier_on(netdev); - else - netif_carrier_off(netdev); - } + if (up) + netif_carrier_on(netdev); + else + netif_carrier_off(netdev); phydev->adjust_link(netdev); if (phydev->mii_ts && phydev->mii_ts->link_state) phydev->mii_ts->link_state(phydev->mii_ts, phydev); @@ -1082,8 +1076,12 @@ int phy_init_hw(struct phy_device *phydev) if (!phydev->drv) return 0; - if (phydev->drv->soft_reset) + if (phydev->drv->soft_reset) { ret = phydev->drv->soft_reset(phydev); + /* see comment in genphy_soft_reset for an explanation */ + if (!ret) + phydev->suspended = 0; + } if (ret < 0) return ret; @@ -1233,7 +1231,7 @@ int phy_sfp_probe(struct phy_device *phydev, const struct sfp_upstream_ops *ops) { struct sfp_bus *bus; - int ret; + int ret = 0; if (phydev->mdio.dev.fwnode) { bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode); @@ -1245,7 +1243,7 @@ int phy_sfp_probe(struct phy_device *phydev, ret = sfp_bus_add_upstream(bus, phydev, ops); sfp_bus_put(bus); } - return 0; + return ret; } EXPORT_SYMBOL(phy_sfp_probe); @@ -1458,6 +1456,144 @@ bool phy_driver_is_genphy_10g(struct phy_device *phydev) EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g); /** + * phy_package_join - join a common PHY group + * @phydev: target phy_device struct + * @addr: cookie and PHY address for global register access + * @priv_size: if non-zero allocate this amount of bytes for private data + * + * This joins a PHY group and provides a shared storage for all phydevs in + * this group. This is intended to be used for packages which contain + * more than one PHY, for example a quad PHY transceiver. + * + * The addr parameter serves as a cookie which has to have the same value + * for all members of one group and as a PHY address to access generic + * registers of a PHY package. Usually, one of the PHY addresses of the + * different PHYs in the package provides access to these global registers. + * The address which is given here, will be used in the phy_package_read() + * and phy_package_write() convenience functions. If your PHY doesn't have + * global registers you can just pick any of the PHY addresses. + * + * This will set the shared pointer of the phydev to the shared storage. + * If this is the first call for a this cookie the shared storage will be + * allocated. If priv_size is non-zero, the given amount of bytes are + * allocated for the priv member. + * + * Returns < 1 on error, 0 on success. Esp. calling phy_package_join() + * with the same cookie but a different priv_size is an error. + */ +int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size) +{ + struct mii_bus *bus = phydev->mdio.bus; + struct phy_package_shared *shared; + int ret; + + if (addr < 0 || addr >= PHY_MAX_ADDR) + return -EINVAL; + + mutex_lock(&bus->shared_lock); + shared = bus->shared[addr]; + if (!shared) { + ret = -ENOMEM; + shared = kzalloc(sizeof(*shared), GFP_KERNEL); + if (!shared) + goto err_unlock; + if (priv_size) { + shared->priv = kzalloc(priv_size, GFP_KERNEL); + if (!shared->priv) + goto err_free; + shared->priv_size = priv_size; + } + shared->addr = addr; + refcount_set(&shared->refcnt, 1); + bus->shared[addr] = shared; + } else { + ret = -EINVAL; + if (priv_size && priv_size != shared->priv_size) + goto err_unlock; + refcount_inc(&shared->refcnt); + } + mutex_unlock(&bus->shared_lock); + + phydev->shared = shared; + + return 0; + +err_free: + kfree(shared); +err_unlock: + mutex_unlock(&bus->shared_lock); + return ret; +} +EXPORT_SYMBOL_GPL(phy_package_join); + +/** + * phy_package_leave - leave a common PHY group + * @phydev: target phy_device struct + * + * This leaves a PHY group created by phy_package_join(). If this phydev + * was the last user of the shared data between the group, this data is + * freed. Resets the phydev->shared pointer to NULL. + */ +void phy_package_leave(struct phy_device *phydev) +{ + struct phy_package_shared *shared = phydev->shared; + struct mii_bus *bus = phydev->mdio.bus; + + if (!shared) + return; + + if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) { + bus->shared[shared->addr] = NULL; + mutex_unlock(&bus->shared_lock); + kfree(shared->priv); + kfree(shared); + } + + phydev->shared = NULL; +} +EXPORT_SYMBOL_GPL(phy_package_leave); + +static void devm_phy_package_leave(struct device *dev, void *res) +{ + phy_package_leave(*(struct phy_device **)res); +} + +/** + * devm_phy_package_join - resource managed phy_package_join() + * @dev: device that is registering this PHY package + * @phydev: target phy_device struct + * @addr: cookie and PHY address for global register access + * @priv_size: if non-zero allocate this amount of bytes for private data + * + * Managed phy_package_join(). Shared storage fetched by this function, + * phy_package_leave() is automatically called on driver detach. See + * phy_package_join() for more information. + */ +int devm_phy_package_join(struct device *dev, struct phy_device *phydev, + int addr, size_t priv_size) +{ + struct phy_device **ptr; + int ret; + + ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + ret = phy_package_join(phydev, addr, priv_size); + + if (!ret) { + *ptr = phydev; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_phy_package_join); + +/** * phy_detach - detach a PHY device from its network device * @phydev: target phy_device struct * @@ -1524,6 +1660,9 @@ int phy_suspend(struct phy_device *phydev) struct phy_driver *phydrv = phydev->drv; int ret; + if (phydev->suspended) + return 0; + /* If the device has WOL enabled, we cannot suspend the PHY */ phy_ethtool_get_wol(phydev, &wol); if (wol.wolopts || (netdev && netdev->wol_enabled)) @@ -1768,6 +1907,90 @@ int genphy_setup_forced(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_setup_forced); +static int genphy_setup_master_slave(struct phy_device *phydev) +{ + u16 ctl = 0; + + if (!phydev->is_gigabit_capable) + return 0; + + switch (phydev->master_slave_set) { + case MASTER_SLAVE_CFG_MASTER_PREFERRED: + ctl |= CTL1000_PREFER_MASTER; + break; + case MASTER_SLAVE_CFG_SLAVE_PREFERRED: + break; + case MASTER_SLAVE_CFG_MASTER_FORCE: + ctl |= CTL1000_AS_MASTER; + /* fallthrough */ + case MASTER_SLAVE_CFG_SLAVE_FORCE: + ctl |= CTL1000_ENABLE_MASTER; + break; + case MASTER_SLAVE_CFG_UNKNOWN: + case MASTER_SLAVE_CFG_UNSUPPORTED: + return 0; + default: + phydev_warn(phydev, "Unsupported Master/Slave mode\n"); + return -EOPNOTSUPP; + } + + return phy_modify_changed(phydev, MII_CTRL1000, + (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | + CTL1000_PREFER_MASTER), ctl); +} + +static int genphy_read_master_slave(struct phy_device *phydev) +{ + int cfg, state; + int val; + + if (!phydev->is_gigabit_capable) { + phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; + return 0; + } + + phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN; + phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN; + + val = phy_read(phydev, MII_CTRL1000); + if (val < 0) + return val; + + if (val & CTL1000_ENABLE_MASTER) { + if (val & CTL1000_AS_MASTER) + cfg = MASTER_SLAVE_CFG_MASTER_FORCE; + else + cfg = MASTER_SLAVE_CFG_SLAVE_FORCE; + } else { + if (val & CTL1000_PREFER_MASTER) + cfg = MASTER_SLAVE_CFG_MASTER_PREFERRED; + else + cfg = MASTER_SLAVE_CFG_SLAVE_PREFERRED; + } + + val = phy_read(phydev, MII_STAT1000); + if (val < 0) + return val; + + if (val & LPA_1000MSFAIL) { + state = MASTER_SLAVE_STATE_ERR; + } else if (phydev->link) { + /* this bits are valid only for active link */ + if (val & LPA_1000MSRES) + state = MASTER_SLAVE_STATE_MASTER; + else + state = MASTER_SLAVE_STATE_SLAVE; + } else { + state = MASTER_SLAVE_STATE_UNKNOWN; + } + + phydev->master_slave_get = cfg; + phydev->master_slave_state = state; + + return 0; +} + /** * genphy_restart_aneg - Enable and Restart Autonegotiation * @phydev: target phy_device struct @@ -1826,6 +2049,12 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) if (genphy_config_eee_advert(phydev)) changed = true; + err = genphy_setup_master_slave(phydev); + if (err < 0) + return err; + else if (err) + changed = true; + if (AUTONEG_ENABLE != phydev->autoneg) return genphy_setup_forced(phydev); @@ -2060,6 +2289,10 @@ int genphy_read_status(struct phy_device *phydev) phydev->pause = 0; phydev->asym_pause = 0; + err = genphy_read_master_slave(phydev); + if (err < 0) + return err; + err = genphy_read_lpa(phydev); if (err < 0) return err; @@ -2154,6 +2387,12 @@ int genphy_soft_reset(struct phy_device *phydev) if (ret < 0) return ret; + /* Clause 22 states that setting bit BMCR_RESET sets control registers + * to their default value. Therefore the POWER DOWN bit is supposed to + * be cleared after soft reset. + */ + phydev->suspended = 0; + ret = phy_poll_reset(phydev); if (ret) return ret; @@ -2627,7 +2866,6 @@ static struct phy_driver genphy_driver = { .phy_id = 0xffffffff, .phy_id_mask = 0xffffffff, .name = "Generic PHY", - .soft_reset = genphy_no_soft_reset, .get_features = genphy_read_abilities, .suspend = genphy_suspend, .resume = genphy_resume, diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 34ca12aec61b..0ab65fb75258 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -480,8 +480,8 @@ static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state) { *state = pl->link_config; - if (pl->get_fixed_state) - pl->get_fixed_state(pl->netdev, state); + if (pl->config->get_fixed_state) + pl->config->get_fixed_state(pl->config, state); else if (pl->link_gpio) state->link = !!gpiod_get_value_cansleep(pl->link_gpio); @@ -803,8 +803,7 @@ void phylink_destroy(struct phylink *pl) } EXPORT_SYMBOL_GPL(phylink_destroy); -static void phylink_phy_change(struct phy_device *phydev, bool up, - bool do_carrier) +static void phylink_phy_change(struct phy_device *phydev, bool up) { struct phylink *pl = phydev->phylink; bool tx_pause, rx_pause; @@ -1045,32 +1044,6 @@ void phylink_disconnect_phy(struct phylink *pl) EXPORT_SYMBOL_GPL(phylink_disconnect_phy); /** - * phylink_fixed_state_cb() - allow setting a fixed link callback - * @pl: a pointer to a &struct phylink returned from phylink_create() - * @cb: callback to execute to determine the fixed link state. - * - * The MAC driver should call this driver when the state of its link - * can be determined through e.g: an out of band MMIO register. - */ -int phylink_fixed_state_cb(struct phylink *pl, - void (*cb)(struct net_device *dev, - struct phylink_link_state *state)) -{ - /* It does not make sense to let the link be overriden unless we use - * MLO_AN_FIXED - */ - if (pl->cfg_link_an_mode != MLO_AN_FIXED) - return -EINVAL; - - mutex_lock(&pl->state_mutex); - pl->get_fixed_state = cb; - mutex_unlock(&pl->state_mutex); - - return 0; -} -EXPORT_SYMBOL_GPL(phylink_fixed_state_cb); - -/** * phylink_mac_change() - notify phylink of a change in MAC state * @pl: a pointer to a &struct phylink returned from phylink_create() * @up: indicates whether the link is currently up. @@ -1106,6 +1079,8 @@ static irqreturn_t phylink_link_handler(int irq, void *data) */ void phylink_start(struct phylink *pl) { + bool poll = false; + ASSERT_RTNL(); phylink_info(pl, "configuring for %s/%s link mode\n", @@ -1142,10 +1117,18 @@ void phylink_start(struct phylink *pl) irq = 0; } if (irq <= 0) - mod_timer(&pl->link_poll, jiffies + HZ); + poll = true; + } + + switch (pl->cfg_link_an_mode) { + case MLO_AN_FIXED: + poll |= pl->config->poll_fixed_state; + break; + case MLO_AN_INBAND: + poll |= pl->config->pcs_poll; + break; } - if ((pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) || - pl->config->pcs_poll) + if (poll) mod_timer(&pl->link_poll, jiffies + HZ); if (pl->phydev) phy_start(pl->phydev); @@ -1648,7 +1631,7 @@ static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, if (mdio_phy_id_is_c45(phy_id)) { prtad = mdio_phy_id_prtad(phy_id); devad = mdio_phy_id_devad(phy_id); - devad = MII_ADDR_C45 | devad << 16 | reg; + devad = mdiobus_c45_addr(devad, reg); } else if (phydev->is_c45) { switch (reg) { case MII_BMCR: @@ -1671,7 +1654,7 @@ static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, return -EINVAL; } prtad = phy_id; - devad = MII_ADDR_C45 | devad << 16 | reg; + devad = mdiobus_c45_addr(devad, reg); } else { prtad = phy_id; devad = reg; @@ -1688,7 +1671,7 @@ static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, if (mdio_phy_id_is_c45(phy_id)) { prtad = mdio_phy_id_prtad(phy_id); devad = mdio_phy_id_devad(phy_id); - devad = MII_ADDR_C45 | devad << 16 | reg; + devad = mdiobus_c45_addr(devad, reg); } else if (phydev->is_c45) { switch (reg) { case MII_BMCR: @@ -1711,7 +1694,7 @@ static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, return -EINVAL; } prtad = phy_id; - devad = MII_ADDR_C45 | devad << 16 | reg; + devad = mdiobus_c45_addr(devad, reg); } else { prtad = phy_id; devad = reg; @@ -2309,7 +2292,6 @@ void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs) } EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart); -#define C45_ADDR(d,a) (MII_ADDR_C45 | (d) << 16 | (a)) void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, struct phylink_link_state *state) { @@ -2317,7 +2299,7 @@ void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs, int addr = pcs->addr; int stat; - stat = mdiobus_read(bus, addr, C45_ADDR(MDIO_MMD_PCS, MDIO_STAT1)); + stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1); if (stat < 0) { state->link = false; return; diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 2d99e9de6ee1..c7229d022a27 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -11,6 +11,7 @@ #include <linux/bitops.h> #include <linux/phy.h> #include <linux/module.h> +#include <linux/delay.h> #define RTL821x_PHYSR 0x11 #define RTL821x_PHYSR_DUPLEX BIT(13) @@ -526,6 +527,16 @@ static int rtl8125_match_phy_device(struct phy_device *phydev) rtlgen_supports_2_5gbps(phydev); } +static int rtlgen_resume(struct phy_device *phydev) +{ + int ret = genphy_resume(phydev); + + /* Internal PHY's from RTL8168h up may not be instantly ready */ + msleep(20); + + return ret; +} + static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201), @@ -609,7 +620,7 @@ static struct phy_driver realtek_drvs[] = { .match_phy_device = rtlgen_match_phy_device, .read_status = rtlgen_read_status, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, .read_mmd = rtlgen_read_mmd, @@ -621,7 +632,7 @@ static struct phy_driver realtek_drvs[] = { .config_aneg = rtl8125_config_aneg, .read_status = rtl8125_read_status, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = rtlgen_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, .read_mmd = rtl8125_read_mmd, diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c index 53c214a22b95..59f1ba4d49bc 100644 --- a/drivers/net/phy/swphy.c +++ b/drivers/net/phy/swphy.c @@ -2,7 +2,7 @@ /* * Software PHY emulation * - * Code taken from fixed_phy.c by Russell King <rmk+kernel@arm.linux.org.uk> + * Code taken from fixed_phy.c by Russell King. * * Author: Vitaly Bordug <vbordug@ru.mvista.com> * Anton Vorontsov <avorontsov@ru.mvista.com> diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c index beb054b931ee..8057ea8dbc21 100644 --- a/drivers/net/phy/teranetics.c +++ b/drivers/net/phy/teranetics.c @@ -78,7 +78,6 @@ static struct phy_driver teranetics_driver[] = { .phy_id_mask = 0xffffffff, .name = "Teranetics TN2020", .features = PHY_10GBIT_FEATURES, - .soft_reset = genphy_no_soft_reset, .aneg_done = teranetics_aneg_done, .config_aneg = gen10g_config_aneg, .read_status = teranetics_read_status, |