summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/Kconfig11
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/amd-xgbe-phy.c168
-rw-r--r--drivers/net/phy/bcm7xxx.c153
-rw-r--r--drivers/net/phy/broadcom.c122
-rw-r--r--drivers/net/phy/dp83640.c35
-rw-r--r--drivers/net/phy/fixed.c27
-rw-r--r--drivers/net/phy/mdio-bcm-unimac.c213
-rw-r--r--drivers/net/phy/mdio_bus.c8
-rw-r--r--drivers/net/phy/phy.c12
-rw-r--r--drivers/net/phy/phy_device.c4
11 files changed, 494 insertions, 260 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 65de0cab8d07..75472cf734de 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -159,8 +159,6 @@ config MDIO_OCTEON
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
- select REGULATOR
- select REGULATOR_FIXED_VOLTAGE
help
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
@@ -205,6 +203,15 @@ config MDIO_BUS_MUX_MMIOREG
Currently, only 8-bit registers are supported.
+config MDIO_BCM_UNIMAC
+ tristate "Broadcom UniMAC MDIO bus controller"
+ depends on HAS_IOMEM
+ help
+ This module provides a driver for the Broadcom UniMAC MDIO busses.
+ This hardware can be found in the Broadcom GENET Ethernet MAC
+ controllers as well as some Broadcom Ethernet switches such as the
+ Starfighter 2 switches.
+
endif # PHYLIB
config MICREL_KS8995MA
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 7dc3d5b304cf..eb3b18b5978b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_AMD_XGBE_PHY) += amd-xgbe-phy.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c
index f3230eef41fd..c456559f6e7f 100644
--- a/drivers/net/phy/amd-xgbe-phy.c
+++ b/drivers/net/phy/amd-xgbe-phy.c
@@ -75,7 +75,6 @@
#include <linux/of_device.h>
#include <linux/uaccess.h>
-
MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION("1.0.0-a");
@@ -100,9 +99,11 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#ifndef MDIO_PMA_10GBR_PMD_CTRL
#define MDIO_PMA_10GBR_PMD_CTRL 0x0096
#endif
+
#ifndef MDIO_PMA_10GBR_FEC_CTRL
#define MDIO_PMA_10GBR_FEC_CTRL 0x00ab
#endif
+
#ifndef MDIO_AN_XNP
#define MDIO_AN_XNP 0x0016
#endif
@@ -110,14 +111,23 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#ifndef MDIO_AN_INTMASK
#define MDIO_AN_INTMASK 0x8001
#endif
+
#ifndef MDIO_AN_INT
#define MDIO_AN_INT 0x8002
#endif
+#ifndef MDIO_AN_KR_CTRL
+#define MDIO_AN_KR_CTRL 0x8003
+#endif
+
#ifndef MDIO_CTRL1_SPEED1G
#define MDIO_CTRL1_SPEED1G (MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
#endif
+#ifndef MDIO_KR_CTRL_PDETECT
+#define MDIO_KR_CTRL_PDETECT 0x01
+#endif
+
/* SerDes integration register offsets */
#define SIR0_KR_RT_1 0x002c
#define SIR0_STATUS 0x0040
@@ -161,7 +171,6 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver");
#define SPEED_1000_TXAMP 0xf
#define SPEED_1000_WORD 0x1
-
/* SerDes RxTx register offsets */
#define RXTX_REG20 0x0050
#define RXTX_REG114 0x01c8
@@ -255,7 +264,6 @@ do { \
XSIR1_IOWRITE((_priv), _reg, reg_val); \
} while (0)
-
/* Macros for reading or writing SerDes RxTx registers
* The ioread macros will get bit fields or full values using the
* register definitions formed using the input names
@@ -283,7 +291,6 @@ do { \
XRXTX_IOWRITE((_priv), _reg, reg_val); \
} while (0)
-
enum amd_xgbe_phy_an {
AMD_XGBE_AN_READY = 0,
AMD_XGBE_AN_START,
@@ -331,7 +338,6 @@ struct amd_xgbe_phy_priv {
/* Maintain link status for re-starting auto-negotiation */
unsigned int link;
- enum amd_xgbe_phy_mode mode;
unsigned int speed_set;
/* Auto-negotiation state machine support */
@@ -342,6 +348,7 @@ struct amd_xgbe_phy_priv {
enum amd_xgbe_phy_rx kx_state;
struct work_struct an_work;
struct workqueue_struct *an_workqueue;
+ unsigned int parallel_detect;
};
static int amd_xgbe_an_enable_kr_training(struct phy_device *phydev)
@@ -468,8 +475,6 @@ static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev)
amd_xgbe_phy_serdes_complete_ratechange(phydev);
- priv->mode = AMD_XGBE_MODE_KR;
-
return 0;
}
@@ -518,8 +523,6 @@ static int amd_xgbe_phy_gmii_2500_mode(struct phy_device *phydev)
amd_xgbe_phy_serdes_complete_ratechange(phydev);
- priv->mode = AMD_XGBE_MODE_KX;
-
return 0;
}
@@ -568,18 +571,43 @@ static int amd_xgbe_phy_gmii_mode(struct phy_device *phydev)
amd_xgbe_phy_serdes_complete_ratechange(phydev);
- priv->mode = AMD_XGBE_MODE_KX;
+ return 0;
+}
+
+static int amd_xgbe_phy_cur_mode(struct phy_device *phydev,
+ enum amd_xgbe_phy_mode *mode)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
+ *mode = AMD_XGBE_MODE_KR;
+ else
+ *mode = AMD_XGBE_MODE_KX;
return 0;
}
+static bool amd_xgbe_phy_in_kr_mode(struct phy_device *phydev)
+{
+ enum amd_xgbe_phy_mode mode;
+
+ if (amd_xgbe_phy_cur_mode(phydev, &mode))
+ return false;
+
+ return (mode == AMD_XGBE_MODE_KR);
+}
+
static int amd_xgbe_phy_switch_mode(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
int ret;
/* If we are in KR switch to KX, and vice-versa */
- if (priv->mode == AMD_XGBE_MODE_KR) {
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000)
ret = amd_xgbe_phy_gmii_mode(phydev);
else
@@ -591,15 +619,20 @@ static int amd_xgbe_phy_switch_mode(struct phy_device *phydev)
return ret;
}
-static enum amd_xgbe_phy_an amd_xgbe_an_switch_mode(struct phy_device *phydev)
+static int amd_xgbe_phy_set_mode(struct phy_device *phydev,
+ enum amd_xgbe_phy_mode mode)
{
+ enum amd_xgbe_phy_mode cur_mode;
int ret;
- ret = amd_xgbe_phy_switch_mode(phydev);
- if (ret < 0)
- return AMD_XGBE_AN_ERROR;
+ ret = amd_xgbe_phy_cur_mode(phydev, &cur_mode);
+ if (ret)
+ return ret;
- return AMD_XGBE_AN_START;
+ if (mode != cur_mode)
+ ret = amd_xgbe_phy_switch_mode(phydev);
+
+ return ret;
}
static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
@@ -610,8 +643,8 @@ static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev,
*state = AMD_XGBE_RX_COMPLETE;
- /* If we're in KX mode then we're done */
- if (priv->mode == AMD_XGBE_MODE_KX)
+ /* If we're not in KR mode then we're done */
+ if (!amd_xgbe_phy_in_kr_mode(phydev))
return AMD_XGBE_AN_EVENT;
/* Enable/Disable FEC */
@@ -669,7 +702,6 @@ static enum amd_xgbe_phy_an amd_xgbe_an_tx_xnp(struct phy_device *phydev,
static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev,
enum amd_xgbe_phy_rx *state)
{
- struct amd_xgbe_phy_priv *priv = phydev->priv;
unsigned int link_support;
int ret, ad_reg, lp_reg;
@@ -679,9 +711,9 @@ static enum amd_xgbe_phy_an amd_xgbe_an_rx_bpa(struct phy_device *phydev,
return AMD_XGBE_AN_ERROR;
/* Check for a supported mode, otherwise restart in a different one */
- link_support = (priv->mode == AMD_XGBE_MODE_KR) ? 0x80 : 0x20;
+ link_support = amd_xgbe_phy_in_kr_mode(phydev) ? 0x80 : 0x20;
if (!(ret & link_support))
- return amd_xgbe_an_switch_mode(phydev);
+ return AMD_XGBE_AN_INCOMPAT_LINK;
/* Check Extended Next Page support */
ad_reg = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
@@ -722,7 +754,7 @@ static enum amd_xgbe_phy_an amd_xgbe_an_start(struct phy_device *phydev)
int ret;
/* Be sure we aren't looping trying to negotiate */
- if (priv->mode == AMD_XGBE_MODE_KR) {
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
if (priv->kr_state != AMD_XGBE_RX_READY)
return AMD_XGBE_AN_NO_LINK;
priv->kr_state = AMD_XGBE_RX_BPA;
@@ -785,6 +817,13 @@ static enum amd_xgbe_phy_an amd_xgbe_an_start(struct phy_device *phydev)
/* Enable and start auto-negotiation */
phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_INT, 0);
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_KR_CTRL);
+ if (ret < 0)
+ return AMD_XGBE_AN_ERROR;
+
+ ret |= MDIO_KR_CTRL_PDETECT;
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_KR_CTRL, ret);
+
ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
if (ret < 0)
return AMD_XGBE_AN_ERROR;
@@ -825,8 +864,8 @@ static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev)
enum amd_xgbe_phy_rx *state;
int ret;
- state = (priv->mode == AMD_XGBE_MODE_KR) ? &priv->kr_state
- : &priv->kx_state;
+ state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state
+ : &priv->kx_state;
switch (*state) {
case AMD_XGBE_RX_BPA:
@@ -846,7 +885,13 @@ static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev)
static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev)
{
- return amd_xgbe_an_switch_mode(phydev);
+ int ret;
+
+ ret = amd_xgbe_phy_switch_mode(phydev);
+ if (ret)
+ return AMD_XGBE_AN_ERROR;
+
+ return AMD_XGBE_AN_START;
}
static void amd_xgbe_an_state_machine(struct work_struct *work)
@@ -859,6 +904,10 @@ static void amd_xgbe_an_state_machine(struct work_struct *work)
int sleep;
unsigned int an_supported = 0;
+ /* Start in KX mode */
+ if (amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX))
+ priv->an_state = AMD_XGBE_AN_ERROR;
+
while (1) {
mutex_lock(&priv->an_mutex);
@@ -866,8 +915,9 @@ static void amd_xgbe_an_state_machine(struct work_struct *work)
switch (priv->an_state) {
case AMD_XGBE_AN_START:
- priv->an_state = amd_xgbe_an_start(phydev);
an_supported = 0;
+ priv->parallel_detect = 0;
+ priv->an_state = amd_xgbe_an_start(phydev);
break;
case AMD_XGBE_AN_EVENT:
@@ -884,6 +934,7 @@ static void amd_xgbe_an_state_machine(struct work_struct *work)
break;
case AMD_XGBE_AN_COMPLETE:
+ priv->parallel_detect = an_supported ? 0 : 1;
netdev_info(phydev->attached_dev, "%s successful\n",
an_supported ? "Auto negotiation"
: "Parallel detection");
@@ -1018,7 +1069,6 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
u32 mmd_mask = phydev->c45_ids.devices_in_package;
- int ret;
if (phydev->autoneg != AUTONEG_ENABLE)
return amd_xgbe_phy_setup_forced(phydev);
@@ -1027,11 +1077,6 @@ static int amd_xgbe_phy_config_aneg(struct phy_device *phydev)
if (!(mmd_mask & MDIO_DEVS_AN))
return -EINVAL;
- /* Get the current speed mode */
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
- if (ret < 0)
- return ret;
-
/* Start/Restart the auto-negotiation state machine */
mutex_lock(&priv->an_mutex);
priv->an_result = AMD_XGBE_AN_READY;
@@ -1121,18 +1166,14 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
{
struct amd_xgbe_phy_priv *priv = phydev->priv;
u32 mmd_mask = phydev->c45_ids.devices_in_package;
- int ret, mode, ad_ret, lp_ret;
+ int ret, ad_ret, lp_ret;
ret = amd_xgbe_phy_update_link(phydev);
if (ret)
return ret;
- mode = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
- if (mode < 0)
- return mode;
- mode &= MDIO_PCS_CTRL2_TYPE;
-
- if (phydev->autoneg == AUTONEG_ENABLE) {
+ if ((phydev->autoneg == AUTONEG_ENABLE) &&
+ !priv->parallel_detect) {
if (!(mmd_mask & MDIO_DEVS_AN))
return -EINVAL;
@@ -1163,40 +1204,39 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev)
ad_ret &= lp_ret;
if (ad_ret & 0x80) {
phydev->speed = SPEED_10000;
- if (mode != MDIO_PCS_CTRL2_10GBR) {
- ret = amd_xgbe_phy_xgmii_mode(phydev);
- if (ret < 0)
- return ret;
- }
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR);
+ if (ret)
+ return ret;
} else {
- int (*mode_fcn)(struct phy_device *);
-
- if (priv->speed_set ==
- AMD_XGBE_PHY_SPEEDSET_1000_10000) {
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
phydev->speed = SPEED_1000;
- mode_fcn = amd_xgbe_phy_gmii_mode;
- } else {
+ break;
+
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
phydev->speed = SPEED_2500;
- mode_fcn = amd_xgbe_phy_gmii_2500_mode;
+ break;
}
- if (mode == MDIO_PCS_CTRL2_10GBR) {
- ret = mode_fcn(phydev);
- if (ret < 0)
- return ret;
- }
+ ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX);
+ if (ret)
+ return ret;
}
phydev->duplex = DUPLEX_FULL;
} else {
- if (mode == MDIO_PCS_CTRL2_10GBR) {
+ if (amd_xgbe_phy_in_kr_mode(phydev)) {
phydev->speed = SPEED_10000;
} else {
- if (priv->speed_set ==
- AMD_XGBE_PHY_SPEEDSET_1000_10000)
+ switch (priv->speed_set) {
+ case AMD_XGBE_PHY_SPEEDSET_1000_10000:
phydev->speed = SPEED_1000;
- else
+ break;
+
+ case AMD_XGBE_PHY_SPEEDSET_2500_10000:
phydev->speed = SPEED_2500;
+ break;
+ }
}
phydev->duplex = DUPLEX_FULL;
phydev->pause = 0;
@@ -1329,14 +1369,6 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev)
priv->link = 1;
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2);
- if (ret < 0)
- goto err_sir1;
- if ((ret & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
- priv->mode = AMD_XGBE_MODE_KR;
- else
- priv->mode = AMD_XGBE_MODE_KX;
-
mutex_init(&priv->an_mutex);
INIT_WORK(&priv->an_work, amd_xgbe_an_state_machine);
priv->an_workqueue = create_singlethread_workqueue(wq_name);
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index fdce1ea28790..1d211d369039 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -14,6 +14,7 @@
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/brcmphy.h>
+#include <linux/mdio.h>
/* Broadcom BCM7xxx internal PHY registers */
#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000
@@ -146,15 +147,79 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm7xxx_apd_enable(struct phy_device *phydev)
+{
+ int val;
+
+ /* Enable powering down of the DLL during auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+ bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+ /* Enable auto-power down */
+ val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+ if (val < 0)
+ return val;
+
+ val |= BCM54XX_SHD_APD_EN;
+ return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+}
+
+static int bcm7xxx_eee_enable(struct phy_device *phydev)
+{
+ int val;
+
+ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+
+ /* Enable general EEE feature at the PHY level */
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+ phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ /* Advertise supported modes */
+ val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr, val);
+
+ return 0;
+}
+
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
- int ret;
+ u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ int ret = 0;
+
+ dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch);
+
+ switch (rev) {
+ case 0xa0:
+ case 0xb0:
+ ret = bcm7445_config_init(phydev);
+ break;
+ default:
+ ret = bcm7xxx_28nm_afe_config_init(phydev);
+ break;
+ }
- ret = bcm7445_config_init(phydev);
if (ret)
return ret;
- return bcm7xxx_28nm_afe_config_init(phydev);
+ ret = bcm7xxx_eee_enable(phydev);
+ if (ret)
+ return ret;
+
+ return bcm7xxx_apd_enable(phydev);
}
static int bcm7xxx_28nm_resume(struct phy_device *phydev)
@@ -201,8 +266,8 @@ static int bcm7xxx_config_init(struct phy_device *phydev)
phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
- /* Workaround only required for 100Mbits/sec */
- if (!(phydev->dev_flags & PHY_BRCM_100MBPS_WAR))
+ /* Workaround only required for 100Mbits/sec capable PHYs */
+ if (phydev->supported & PHY_GBIT_FEATURES)
return 0;
/* set shadow mode 2 */
@@ -263,43 +328,53 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
return 0;
}
+#define BCM7XXX_28NM_GPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_GBIT_FEATURES | \
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_28nm_afe_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .resume = bcm7xxx_28nm_resume, \
+ .driver = { .owner = THIS_MODULE }, \
+}
+
static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
{
- .phy_id = PHY_ID_BCM7366,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7366",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_resume,
- .driver = { .owner = THIS_MODULE },
-}, {
- .phy_id = PHY_ID_BCM7439,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7439",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7425,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7425",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_afe_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_resume,
- .driver = { .owner = THIS_MODULE },
+ .flags = 0,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
- .phy_id = PHY_ID_BCM7445,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7445",
- .features = PHY_GBIT_FEATURES |
+ .phy_id = PHY_ID_BCM7429,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7429",
+ .features = PHY_GBIT_FEATURES |
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_28nm_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .resume = bcm7xxx_28nm_afe_config_init,
- .driver = { .owner = THIS_MODULE },
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
}, {
.phy_id = PHY_BCM_OUI_4,
.phy_id_mask = 0xffff0000,
@@ -329,7 +404,11 @@ static struct phy_driver bcm7xxx_driver[] = {
} };
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
{ PHY_ID_BCM7439, 0xfffffff0, },
{ PHY_ID_BCM7445, 0xfffffff0, },
{ PHY_BCM_OUI_4, 0xffff0000 },
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 34088d60da74..854f2c9a7b2b 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,132 +25,10 @@
#define BRCM_PHY_REV(phydev) \
((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
-/*
- * Broadcom LED source encodings. These are used in BCM5461, BCM5481,
- * BCM5482, and possibly some others.
- */
-#define BCM_LED_SRC_LINKSPD1 0x0
-#define BCM_LED_SRC_LINKSPD2 0x1
-#define BCM_LED_SRC_XMITLED 0x2
-#define BCM_LED_SRC_ACTIVITYLED 0x3
-#define BCM_LED_SRC_FDXLED 0x4
-#define BCM_LED_SRC_SLAVE 0x5
-#define BCM_LED_SRC_INTR 0x6
-#define BCM_LED_SRC_QUALITY 0x7
-#define BCM_LED_SRC_RCVLED 0x8
-#define BCM_LED_SRC_MULTICOLOR1 0xa
-#define BCM_LED_SRC_OPENSHORT 0xb
-#define BCM_LED_SRC_OFF 0xe /* Tied high */
-#define BCM_LED_SRC_ON 0xf /* Tied low */
-
-
-/*
- * BCM5482: Shadow registers
- * Shadow values go into bits [14:10] of register 0x1c to select a shadow
- * register to access.
- */
-/* 00101: Spare Control Register 3 */
-#define BCM54XX_SHD_SCR3 0x05
-#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
-#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
-#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
-
-/* 01010: Auto Power-Down */
-#define BCM54XX_SHD_APD 0x0a
-#define BCM54XX_SHD_APD_EN 0x0020
-
-#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */
- /* LED3 / ~LINKSPD[2] selector */
-#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4)
- /* LED1 / ~LINKSPD[1] selector */
-#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0)
-#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */
-#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */
-#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */
-#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */
-#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */
-#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */
-
-
-/*
- * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
- */
-#define MII_BCM54XX_EXP_AADJ1CH0 0x001f
-#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200
-#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100
-#define MII_BCM54XX_EXP_AADJ1CH3 0x601f
-#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002
-#define MII_BCM54XX_EXP_EXP08 0x0F08
-#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001
-#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200
-#define MII_BCM54XX_EXP_EXP75 0x0f75
-#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c
-#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001
-#define MII_BCM54XX_EXP_EXP96 0x0f96
-#define MII_BCM54XX_EXP_EXP96_MYST 0x0010
-#define MII_BCM54XX_EXP_EXP97 0x0f97
-#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c
-
-/*
- * BCM5482: Secondary SerDes registers
- */
-#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */
-#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */
-#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */
-#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
-#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
-
-
-/*****************************************************************************/
-/* Fast Ethernet Transceiver definitions. */
-/*****************************************************************************/
-
-#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */
-#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */
-#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */
-#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */
-#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */
-#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */
-
-#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */
-#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */
-
-
-/*** Shadow register definitions ***/
-
-#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */
-#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */
-
-#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */
-#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003
-#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
-
-#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */
-#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */
-
-
MODULE_DESCRIPTION("Broadcom PHY driver");
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
- phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
- return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow, u16 val)
-{
- return phy_write(phydev, MII_BCM54XX_SHD,
- MII_BCM54XX_SHD_WRITE |
- MII_BCM54XX_SHD_VAL(shadow) |
- MII_BCM54XX_SHD_DATA(val));
-}
-
/* Indirect register access functions for the Expansion Registers */
static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
{
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index c301e4cb37ca..2954052706e8 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -721,7 +721,7 @@ static inline u16 exts_chan_to_edata(int ch)
}
static int decode_evnt(struct dp83640_private *dp83640,
- void *data, u16 ests)
+ void *data, int len, u16 ests)
{
struct phy_txts *phy_txts;
struct ptp_clock_event event;
@@ -729,6 +729,16 @@ static int decode_evnt(struct dp83640_private *dp83640,
int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK;
u16 ext_status = 0;
+ /* calculate length of the event timestamp status message */
+ if (ests & MULT_EVNT)
+ parsed = (words + 2) * sizeof(u16);
+ else
+ parsed = (words + 1) * sizeof(u16);
+
+ /* check if enough data is available */
+ if (len < parsed)
+ return len;
+
if (ests & MULT_EVNT) {
ext_status = *(u16 *) data;
data += sizeof(ext_status);
@@ -747,10 +757,7 @@ static int decode_evnt(struct dp83640_private *dp83640,
dp83640->edata.ns_lo = phy_txts->ns_lo;
}
- if (ext_status) {
- parsed = words + 2;
- } else {
- parsed = words + 1;
+ if (!ext_status) {
i = ((ests >> EVNT_NUM_SHIFT) & EVNT_NUM_MASK) - EXT_EVENT;
ext_status = exts_chan_to_edata(i);
}
@@ -768,7 +775,7 @@ static int decode_evnt(struct dp83640_private *dp83640,
}
}
- return parsed * sizeof(u16);
+ return parsed;
}
static int match(struct sk_buff *skb, unsigned int type, struct rxts *rxts)
@@ -905,9 +912,9 @@ static void decode_status_frame(struct dp83640_private *dp83640,
decode_txts(dp83640, phy_txts);
size = sizeof(*phy_txts);
- } else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) {
+ } else if (PSF_EVNT == type) {
- size = decode_evnt(dp83640, ptr, ests);
+ size = decode_evnt(dp83640, ptr, len, ests);
} else {
size = 0;
@@ -1129,7 +1136,6 @@ static void dp83640_remove(struct phy_device *phydev)
struct dp83640_clock *clock;
struct list_head *this, *next;
struct dp83640_private *tmp, *dp83640 = phydev->priv;
- struct sk_buff *skb;
if (phydev->addr == BROADCAST_ADDR)
return;
@@ -1137,11 +1143,8 @@ static void dp83640_remove(struct phy_device *phydev)
enable_status_frames(phydev, false);
cancel_work_sync(&dp83640->ts_work);
- while ((skb = skb_dequeue(&dp83640->rx_queue)) != NULL)
- kfree_skb(skb);
-
- while ((skb = skb_dequeue(&dp83640->tx_queue)) != NULL)
- skb_complete_tx_timestamp(skb, NULL);
+ skb_queue_purge(&dp83640->rx_queue);
+ skb_queue_purge(&dp83640->tx_queue);
clock = dp83640_clock_get(dp83640->clock);
@@ -1398,7 +1401,7 @@ static void dp83640_txtstamp(struct phy_device *phydev,
case HWTSTAMP_TX_ONESTEP_SYNC:
if (is_sync(skb, type)) {
- skb_complete_tx_timestamp(skb, NULL);
+ kfree_skb(skb);
return;
}
/* fall through */
@@ -1409,7 +1412,7 @@ static void dp83640_txtstamp(struct phy_device *phydev,
case HWTSTAMP_TX_OFF:
default:
- skb_complete_tx_timestamp(skb, NULL);
+ kfree_skb(skb);
break;
}
}
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index d60d875cb445..47872caa0081 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -124,6 +124,17 @@ static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
if (reg_num >= MII_REGS_NUM)
return -1;
+ /* We do not support emulating Clause 45 over Clause 22 register reads
+ * return an error instead of bogus data.
+ */
+ switch (reg_num) {
+ case MII_MMD_CTRL:
+ case MII_MMD_DATA:
+ return -1;
+ default:
+ break;
+ }
+
list_for_each_entry(fp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
/* Issue callback if user registered it. */
@@ -222,9 +233,9 @@ EXPORT_SYMBOL_GPL(fixed_phy_del);
static int phy_fixed_addr;
static DEFINE_SPINLOCK(phy_fixed_addr_lock);
-int fixed_phy_register(unsigned int irq,
- struct fixed_phy_status *status,
- struct device_node *np)
+struct phy_device *fixed_phy_register(unsigned int irq,
+ struct fixed_phy_status *status,
+ struct device_node *np)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct phy_device *phy;
@@ -235,19 +246,19 @@ int fixed_phy_register(unsigned int irq,
spin_lock(&phy_fixed_addr_lock);
if (phy_fixed_addr == PHY_MAX_ADDR) {
spin_unlock(&phy_fixed_addr_lock);
- return -ENOSPC;
+ return ERR_PTR(-ENOSPC);
}
phy_addr = phy_fixed_addr++;
spin_unlock(&phy_fixed_addr_lock);
ret = fixed_phy_add(PHY_POLL, phy_addr, status);
if (ret < 0)
- return ret;
+ return ERR_PTR(ret);
phy = get_phy_device(fmb->mii_bus, phy_addr, false);
if (!phy || IS_ERR(phy)) {
fixed_phy_del(phy_addr);
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
of_node_get(np);
@@ -258,10 +269,10 @@ int fixed_phy_register(unsigned int irq,
phy_device_free(phy);
of_node_put(np);
fixed_phy_del(phy_addr);
- return ret;
+ return ERR_PTR(ret);
}
- return 0;
+ return phy;
}
static int __init fixed_mdio_bus_init(void)
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
new file mode 100644
index 000000000000..5b643e588e8f
--- /dev/null
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -0,0 +1,213 @@
+/*
+ * Broadcom UniMAC MDIO bus controller driver
+ *
+ * Copyright (C) 2014, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+
+#define MDIO_CMD 0x00
+#define MDIO_START_BUSY (1 << 29)
+#define MDIO_READ_FAIL (1 << 28)
+#define MDIO_RD (2 << 26)
+#define MDIO_WR (1 << 26)
+#define MDIO_PMD_SHIFT 21
+#define MDIO_PMD_MASK 0x1F
+#define MDIO_REG_SHIFT 16
+#define MDIO_REG_MASK 0x1F
+
+#define MDIO_CFG 0x04
+#define MDIO_C22 (1 << 0)
+#define MDIO_C45 0
+#define MDIO_CLK_DIV_SHIFT 4
+#define MDIO_CLK_DIV_MASK 0x3F
+#define MDIO_SUPP_PREAMBLE (1 << 12)
+
+struct unimac_mdio_priv {
+ struct mii_bus *mii_bus;
+ void __iomem *base;
+};
+
+static inline void unimac_mdio_start(struct unimac_mdio_priv *priv)
+{
+ u32 reg;
+
+ reg = __raw_readl(priv->base + MDIO_CMD);
+ reg |= MDIO_START_BUSY;
+ __raw_writel(reg, priv->base + MDIO_CMD);
+}
+
+static inline unsigned int unimac_mdio_busy(struct unimac_mdio_priv *priv)
+{
+ return __raw_readl(priv->base + MDIO_CMD) & MDIO_START_BUSY;
+}
+
+static int unimac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ struct unimac_mdio_priv *priv = bus->priv;
+ unsigned int timeout = 1000;
+ u32 cmd;
+
+ /* Prepare the read operation */
+ cmd = MDIO_RD | (phy_id << MDIO_PMD_SHIFT) | (reg << MDIO_REG_SHIFT);
+ __raw_writel(cmd, priv->base + MDIO_CMD);
+
+ /* Start MDIO transaction */
+ unimac_mdio_start(priv);
+
+ do {
+ if (!unimac_mdio_busy(priv))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ cmd = __raw_readl(priv->base + MDIO_CMD);
+ if (cmd & MDIO_READ_FAIL)
+ return -EIO;
+
+ return cmd & 0xffff;
+}
+
+static int unimac_mdio_write(struct mii_bus *bus, int phy_id,
+ int reg, u16 val)
+{
+ struct unimac_mdio_priv *priv = bus->priv;
+ unsigned int timeout = 1000;
+ u32 cmd;
+
+ /* Prepare the write operation */
+ cmd = MDIO_WR | (phy_id << MDIO_PMD_SHIFT) |
+ (reg << MDIO_REG_SHIFT) | (0xffff & val);
+ __raw_writel(cmd, priv->base + MDIO_CMD);
+
+ unimac_mdio_start(priv);
+
+ do {
+ if (!unimac_mdio_busy(priv))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int unimac_mdio_probe(struct platform_device *pdev)
+{
+ struct unimac_mdio_priv *priv;
+ struct device_node *np;
+ struct mii_bus *bus;
+ struct resource *r;
+ int ret;
+
+ np = pdev->dev.of_node;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ /* Just ioremap, as this MDIO block is usually integrated into an
+ * Ethernet MAC controller register range
+ */
+ priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (!priv->base) {
+ dev_err(&pdev->dev, "failed to remap register\n");
+ return -ENOMEM;
+ }
+
+ priv->mii_bus = mdiobus_alloc();
+ if (!priv->mii_bus)
+ return -ENOMEM;
+
+ bus = priv->mii_bus;
+ bus->priv = priv;
+ bus->name = "unimac MII bus";
+ bus->parent = &pdev->dev;
+ bus->read = unimac_mdio_read;
+ bus->write = unimac_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
+
+ bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
+ if (!bus->irq) {
+ ret = -ENOMEM;
+ goto out_mdio_free;
+ }
+
+ ret = of_mdiobus_register(bus, np);
+ if (ret) {
+ dev_err(&pdev->dev, "MDIO bus registration failed\n");
+ goto out_mdio_irq;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus at 0x%p\n", priv->base);
+
+ return 0;
+
+out_mdio_irq:
+ kfree(bus->irq);
+out_mdio_free:
+ mdiobus_free(bus);
+ return ret;
+}
+
+static int unimac_mdio_remove(struct platform_device *pdev)
+{
+ struct unimac_mdio_priv *priv = platform_get_drvdata(pdev);
+
+ mdiobus_unregister(priv->mii_bus);
+ kfree(priv->mii_bus->irq);
+ mdiobus_free(priv->mii_bus);
+
+ return 0;
+}
+
+static struct of_device_id unimac_mdio_ids[] = {
+ { .compatible = "brcm,genet-mdio-v4", },
+ { .compatible = "brcm,genet-mdio-v3", },
+ { .compatible = "brcm,genet-mdio-v2", },
+ { .compatible = "brcm,genet-mdio-v1", },
+ { .compatible = "brcm,unimac-mdio", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver unimac_mdio_driver = {
+ .driver = {
+ .name = "unimac-mdio",
+ .owner = THIS_MODULE,
+ .of_match_table = unimac_mdio_ids,
+ },
+ .probe = unimac_mdio_probe,
+ .remove = unimac_mdio_remove,
+};
+module_platform_driver(unimac_mdio_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("Broadcom UniMAC MDIO bus controller");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:unimac-mdio");
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 4eaadcfcb0fe..50051f271b10 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -553,8 +553,14 @@ static ssize_t
phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct phy_device *phydev = to_phy_device(dev);
+ const char *mode = NULL;
- return sprintf(buf, "%s\n", phy_modes(phydev->interface));
+ if (phy_is_internal(phydev))
+ mode = "internal";
+ else
+ mode = phy_modes(phydev->interface);
+
+ return sprintf(buf, "%s\n", mode);
}
static DEVICE_ATTR_RO(phy_interface);
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index a854d38c231d..1dfffdc9dfc3 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -955,7 +955,7 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
* 3) Read reg 14 // Read MMD data
*/
-static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
int devad, int addr)
{
struct phy_driver *phydrv = phydev->drv;
@@ -971,6 +971,7 @@ static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
}
return value;
}
+EXPORT_SYMBOL(phy_read_mmd_indirect);
/**
* phy_write_mmd_indirect - writes data to the MMD registers
@@ -988,7 +989,7 @@ static int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
* 3) Write reg 13 // MMD Data Command for MMD DEVAD
* 3) Write reg 14 // Write MMD data
*/
-static void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
+void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
int devad, int addr, u32 data)
{
struct phy_driver *phydrv = phydev->drv;
@@ -1002,6 +1003,7 @@ static void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
phydrv->write_mmd_indirect(phydev, prtad, devad, addr, data);
}
}
+EXPORT_SYMBOL(phy_write_mmd_indirect);
/**
* phy_init_eee - init and check the EEE feature
@@ -1017,12 +1019,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
{
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
- * or RGMII.
+ * or RGMII. Internal PHYs are also allowed to proceed and should
+ * return an error if they do not support EEE.
*/
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
- (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ phy_is_internal(phydev))) {
int eee_lp, eee_cap, eee_adv;
u32 lp, cap, adv;
int status;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ca5ec3e18d36..3fc91e89f5a5 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -230,13 +230,13 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
for (i = 1;
i < num_ids && c45_ids->devices_in_package == 0;
i++) {
- reg_addr = MII_ADDR_C45 | i << 16 | 6;
+ reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2;
phy_reg = mdiobus_read(bus, addr, reg_addr);
if (phy_reg < 0)
return -EIO;
c45_ids->devices_in_package = (phy_reg & 0xffff) << 16;
- reg_addr = MII_ADDR_C45 | i << 16 | 5;
+ reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS1;
phy_reg = mdiobus_read(bus, addr, reg_addr);
if (phy_reg < 0)
return -EIO;
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 15:02:13 +0300