summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/commands.h')
-rw-r--r--drivers/net/wireless/intel/iwlwifi/dvm/commands.h4008
1 files changed, 4008 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/commands.h b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
new file mode 100644
index 000000000000..2ab2773655a8
--- /dev/null
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/commands.h
@@ -0,0 +1,4008 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <linuxwifi@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+/*
+ * Please use this file (commands.h) only for uCode API definitions.
+ * Please use iwl-xxxx-hw.h for hardware-related definitions.
+ * Please use dev.h for driver implementation definitions.
+ */
+
+#ifndef __iwl_commands_h__
+#define __iwl_commands_h__
+
+#include <linux/ieee80211.h>
+#include <linux/types.h>
+
+
+enum {
+ REPLY_ALIVE = 0x1,
+ REPLY_ERROR = 0x2,
+ REPLY_ECHO = 0x3, /* test command */
+
+ /* RXON and QOS commands */
+ REPLY_RXON = 0x10,
+ REPLY_RXON_ASSOC = 0x11,
+ REPLY_QOS_PARAM = 0x13,
+ REPLY_RXON_TIMING = 0x14,
+
+ /* Multi-Station support */
+ REPLY_ADD_STA = 0x18,
+ REPLY_REMOVE_STA = 0x19,
+ REPLY_REMOVE_ALL_STA = 0x1a, /* not used */
+ REPLY_TXFIFO_FLUSH = 0x1e,
+
+ /* Security */
+ REPLY_WEPKEY = 0x20,
+
+ /* RX, TX, LEDs */
+ REPLY_TX = 0x1c,
+ REPLY_LEDS_CMD = 0x48,
+ REPLY_TX_LINK_QUALITY_CMD = 0x4e,
+
+ /* WiMAX coexistence */
+ COEX_PRIORITY_TABLE_CMD = 0x5a,
+ COEX_MEDIUM_NOTIFICATION = 0x5b,
+ COEX_EVENT_CMD = 0x5c,
+
+ /* Calibration */
+ TEMPERATURE_NOTIFICATION = 0x62,
+ CALIBRATION_CFG_CMD = 0x65,
+ CALIBRATION_RES_NOTIFICATION = 0x66,
+ CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
+
+ /* 802.11h related */
+ REPLY_QUIET_CMD = 0x71, /* not used */
+ REPLY_CHANNEL_SWITCH = 0x72,
+ CHANNEL_SWITCH_NOTIFICATION = 0x73,
+ REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74,
+ SPECTRUM_MEASURE_NOTIFICATION = 0x75,
+
+ /* Power Management */
+ POWER_TABLE_CMD = 0x77,
+ PM_SLEEP_NOTIFICATION = 0x7A,
+ PM_DEBUG_STATISTIC_NOTIFIC = 0x7B,
+
+ /* Scan commands and notifications */
+ REPLY_SCAN_CMD = 0x80,
+ REPLY_SCAN_ABORT_CMD = 0x81,
+ SCAN_START_NOTIFICATION = 0x82,
+ SCAN_RESULTS_NOTIFICATION = 0x83,
+ SCAN_COMPLETE_NOTIFICATION = 0x84,
+
+ /* IBSS/AP commands */
+ BEACON_NOTIFICATION = 0x90,
+ REPLY_TX_BEACON = 0x91,
+ WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */
+
+ /* Miscellaneous commands */
+ REPLY_TX_POWER_DBM_CMD = 0x95,
+ QUIET_NOTIFICATION = 0x96, /* not used */
+ REPLY_TX_PWR_TABLE_CMD = 0x97,
+ REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */
+ TX_ANT_CONFIGURATION_CMD = 0x98,
+ MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */
+
+ /* Bluetooth device coexistence config command */
+ REPLY_BT_CONFIG = 0x9b,
+
+ /* Statistics */
+ REPLY_STATISTICS_CMD = 0x9c,
+ STATISTICS_NOTIFICATION = 0x9d,
+
+ /* RF-KILL commands and notifications */
+ REPLY_CARD_STATE_CMD = 0xa0,
+ CARD_STATE_NOTIFICATION = 0xa1,
+
+ /* Missed beacons notification */
+ MISSED_BEACONS_NOTIFICATION = 0xa2,
+
+ REPLY_CT_KILL_CONFIG_CMD = 0xa4,
+ SENSITIVITY_CMD = 0xa8,
+ REPLY_PHY_CALIBRATION_CMD = 0xb0,
+ REPLY_RX_PHY_CMD = 0xc0,
+ REPLY_RX_MPDU_CMD = 0xc1,
+ REPLY_RX = 0xc3,
+ REPLY_COMPRESSED_BA = 0xc5,
+
+ /* BT Coex */
+ REPLY_BT_COEX_PRIO_TABLE = 0xcc,
+ REPLY_BT_COEX_PROT_ENV = 0xcd,
+ REPLY_BT_COEX_PROFILE_NOTIF = 0xce,
+
+ /* PAN commands */
+ REPLY_WIPAN_PARAMS = 0xb2,
+ REPLY_WIPAN_RXON = 0xb3, /* use REPLY_RXON structure */
+ REPLY_WIPAN_RXON_TIMING = 0xb4, /* use REPLY_RXON_TIMING structure */
+ REPLY_WIPAN_RXON_ASSOC = 0xb6, /* use REPLY_RXON_ASSOC structure */
+ REPLY_WIPAN_QOS_PARAM = 0xb7, /* use REPLY_QOS_PARAM structure */
+ REPLY_WIPAN_WEPKEY = 0xb8, /* use REPLY_WEPKEY structure */
+ REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9,
+ REPLY_WIPAN_NOA_NOTIFICATION = 0xbc,
+ REPLY_WIPAN_DEACTIVATION_COMPLETE = 0xbd,
+
+ REPLY_WOWLAN_PATTERNS = 0xe0,
+ REPLY_WOWLAN_WAKEUP_FILTER = 0xe1,
+ REPLY_WOWLAN_TSC_RSC_PARAMS = 0xe2,
+ REPLY_WOWLAN_TKIP_PARAMS = 0xe3,
+ REPLY_WOWLAN_KEK_KCK_MATERIAL = 0xe4,
+ REPLY_WOWLAN_GET_STATUS = 0xe5,
+ REPLY_D3_CONFIG = 0xd3,
+
+ REPLY_MAX = 0xff
+};
+
+/*
+ * Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate
+ * - 4 standard TX queues
+ * - the command queue
+ * - 4 PAN TX queues
+ * - the PAN multicast queue, and
+ * - the AUX (TX during scan dwell) queue.
+ */
+#define IWL_MIN_NUM_QUEUES 11
+
+/*
+ * Command queue depends on iPAN support.
+ */
+#define IWL_DEFAULT_CMD_QUEUE_NUM 4
+#define IWL_IPAN_CMD_QUEUE_NUM 9
+
+#define IWL_TX_FIFO_BK 0 /* shared */
+#define IWL_TX_FIFO_BE 1
+#define IWL_TX_FIFO_VI 2 /* shared */
+#define IWL_TX_FIFO_VO 3
+#define IWL_TX_FIFO_BK_IPAN IWL_TX_FIFO_BK
+#define IWL_TX_FIFO_BE_IPAN 4
+#define IWL_TX_FIFO_VI_IPAN IWL_TX_FIFO_VI
+#define IWL_TX_FIFO_VO_IPAN 5
+/* re-uses the VO FIFO, uCode will properly flush/schedule */
+#define IWL_TX_FIFO_AUX 5
+#define IWL_TX_FIFO_UNUSED 255
+
+#define IWLAGN_CMD_FIFO_NUM 7
+
+/*
+ * This queue number is required for proper operation
+ * because the ucode will stop/start the scheduler as
+ * required.
+ */
+#define IWL_IPAN_MCAST_QUEUE 8
+
+/******************************************************************************
+ * (0)
+ * Commonly used structures and definitions:
+ * Command header, rate_n_flags, txpower
+ *
+ *****************************************************************************/
+
+/**
+ * iwlagn rate_n_flags bit fields
+ *
+ * rate_n_flags format is used in following iwlagn commands:
+ * REPLY_RX (response only)
+ * REPLY_RX_MPDU (response only)
+ * REPLY_TX (both command and response)
+ * REPLY_TX_LINK_QUALITY_CMD
+ *
+ * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
+ * 2-0: 0) 6 Mbps
+ * 1) 12 Mbps
+ * 2) 18 Mbps
+ * 3) 24 Mbps
+ * 4) 36 Mbps
+ * 5) 48 Mbps
+ * 6) 54 Mbps
+ * 7) 60 Mbps
+ *
+ * 4-3: 0) Single stream (SISO)
+ * 1) Dual stream (MIMO)
+ * 2) Triple stream (MIMO)
+ *
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
+ *
+ * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
+ * 3-0: 0xD) 6 Mbps
+ * 0xF) 9 Mbps
+ * 0x5) 12 Mbps
+ * 0x7) 18 Mbps
+ * 0x9) 24 Mbps
+ * 0xB) 36 Mbps
+ * 0x1) 48 Mbps
+ * 0x3) 54 Mbps
+ *
+ * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
+ * 6-0: 10) 1 Mbps
+ * 20) 2 Mbps
+ * 55) 5.5 Mbps
+ * 110) 11 Mbps
+ */
+#define RATE_MCS_CODE_MSK 0x7
+#define RATE_MCS_SPATIAL_POS 3
+#define RATE_MCS_SPATIAL_MSK 0x18
+#define RATE_MCS_HT_DUP_POS 5
+#define RATE_MCS_HT_DUP_MSK 0x20
+/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */
+#define RATE_MCS_RATE_MSK 0xff
+
+/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
+#define RATE_MCS_FLAGS_POS 8
+#define RATE_MCS_HT_POS 8
+#define RATE_MCS_HT_MSK 0x100
+
+/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
+#define RATE_MCS_CCK_POS 9
+#define RATE_MCS_CCK_MSK 0x200
+
+/* Bit 10: (1) Use Green Field preamble */
+#define RATE_MCS_GF_POS 10
+#define RATE_MCS_GF_MSK 0x400
+
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
+
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
+#define RATE_MCS_DUP_POS 12
+#define RATE_MCS_DUP_MSK 0x1000
+
+/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
+#define RATE_MCS_SGI_POS 13
+#define RATE_MCS_SGI_MSK 0x2000
+
+/**
+ * rate_n_flags Tx antenna masks
+ * 4965 has 2 transmitters
+ * 5100 has 1 transmitter B
+ * 5150 has 1 transmitter A
+ * 5300 has 3 transmitters
+ * 5350 has 3 transmitters
+ * bit14:16
+ */
+#define RATE_MCS_ANT_POS 14
+#define RATE_MCS_ANT_A_MSK 0x04000
+#define RATE_MCS_ANT_B_MSK 0x08000
+#define RATE_MCS_ANT_C_MSK 0x10000
+#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK)
+#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
+#define RATE_ANT_NUM 3
+
+#define POWER_TABLE_NUM_ENTRIES 33
+#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
+#define POWER_TABLE_CCK_ENTRY 32
+
+#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24
+#define IWL_PWR_CCK_ENTRIES 2
+
+/**
+ * struct tx_power_dual_stream
+ *
+ * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ *
+ * Same format as iwl_tx_power_dual_stream, but __le32
+ */
+struct tx_power_dual_stream {
+ __le32 dw;
+} __packed;
+
+/**
+ * Command REPLY_TX_POWER_DBM_CMD = 0x98
+ * struct iwlagn_tx_power_dbm_cmd
+ */
+#define IWLAGN_TX_POWER_AUTO 0x7f
+#define IWLAGN_TX_POWER_NO_CLOSED (0x1 << 6)
+
+struct iwlagn_tx_power_dbm_cmd {
+ s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
+ u8 flags;
+ s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
+ u8 reserved;
+} __packed;
+
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+ __le32 valid;
+} __packed;
+
+/******************************************************************************
+ * (0a)
+ * Alive and Error Commands & Responses:
+ *
+ *****************************************************************************/
+
+#define UCODE_VALID_OK cpu_to_le32(0x1)
+
+/**
+ * REPLY_ALIVE = 0x1 (response only, not a command)
+ *
+ * uCode issues this "alive" notification once the runtime image is ready
+ * to receive commands from the driver. This is the *second* "alive"
+ * notification that the driver will receive after rebooting uCode;
+ * this "alive" is indicated by subtype field != 9.
+ *
+ * See comments documenting "BSM" (bootstrap state machine).
+ *
+ * This response includes two pointers to structures within the device's
+ * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging:
+ *
+ * 1) log_event_table_ptr indicates base of the event log. This traces
+ * a 256-entry history of uCode execution within a circular buffer.
+ * Its header format is:
+ *
+ * __le32 log_size; log capacity (in number of entries)
+ * __le32 type; (1) timestamp with each entry, (0) no timestamp
+ * __le32 wraps; # times uCode has wrapped to top of circular buffer
+ * __le32 write_index; next circular buffer entry that uCode would fill
+ *
+ * The header is followed by the circular buffer of log entries. Entries
+ * with timestamps have the following format:
+ *
+ * __le32 event_id; range 0 - 1500
+ * __le32 timestamp; low 32 bits of TSF (of network, if associated)
+ * __le32 data; event_id-specific data value
+ *
+ * Entries without timestamps contain only event_id and data.
+ *
+ *
+ * 2) error_event_table_ptr indicates base of the error log. This contains
+ * information about any uCode error that occurs. For agn, the format
+ * of the error log is defined by struct iwl_error_event_table.
+ *
+ * The Linux driver can print both logs to the system log when a uCode error
+ * occurs.
+ */
+
+/*
+ * Note: This structure is read from the device with IO accesses,
+ * and the reading already does the endian conversion. As it is
+ * read with u32-sized accesses, any members with a different size
+ * need to be ordered correctly though!
+ */
+struct iwl_error_event_table {
+ u32 valid; /* (nonzero) valid, (0) log is empty */
+ u32 error_id; /* type of error */
+ u32 pc; /* program counter */
+ u32 blink1; /* branch link */
+ u32 blink2; /* branch link */
+ u32 ilink1; /* interrupt link */
+ u32 ilink2; /* interrupt link */
+ u32 data1; /* error-specific data */
+ u32 data2; /* error-specific data */
+ u32 line; /* source code line of error */
+ u32 bcon_time; /* beacon timer */
+ u32 tsf_low; /* network timestamp function timer */
+ u32 tsf_hi; /* network timestamp function timer */
+ u32 gp1; /* GP1 timer register */
+ u32 gp2; /* GP2 timer register */
+ u32 gp3; /* GP3 timer register */
+ u32 ucode_ver; /* uCode version */
+ u32 hw_ver; /* HW Silicon version */
+ u32 brd_ver; /* HW board version */
+ u32 log_pc; /* log program counter */
+ u32 frame_ptr; /* frame pointer */
+ u32 stack_ptr; /* stack pointer */
+ u32 hcmd; /* last host command header */
+ u32 isr0; /* isr status register LMPM_NIC_ISR0:
+ * rxtx_flag */
+ u32 isr1; /* isr status register LMPM_NIC_ISR1:
+ * host_flag */
+ u32 isr2; /* isr status register LMPM_NIC_ISR2:
+ * enc_flag */
+ u32 isr3; /* isr status register LMPM_NIC_ISR3:
+ * time_flag */
+ u32 isr4; /* isr status register LMPM_NIC_ISR4:
+ * wico interrupt */
+ u32 isr_pref; /* isr status register LMPM_NIC_PREF_STAT */
+ u32 wait_event; /* wait event() caller address */
+ u32 l2p_control; /* L2pControlField */
+ u32 l2p_duration; /* L2pDurationField */
+ u32 l2p_mhvalid; /* L2pMhValidBits */
+ u32 l2p_addr_match; /* L2pAddrMatchStat */
+ u32 lmpm_pmg_sel; /* indicate which clocks are turned on
+ * (LMPM_PMG_SEL) */
+ u32 u_timestamp; /* indicate when the date and time of the
+ * compilation */
+ u32 flow_handler; /* FH read/write pointers, RX credit */
+} __packed;
+
+struct iwl_alive_resp {
+ u8 ucode_minor;
+ u8 ucode_major;
+ __le16 reserved1;
+ u8 sw_rev[8];
+ u8 ver_type;
+ u8 ver_subtype; /* not "9" for runtime alive */
+ __le16 reserved2;
+ __le32 log_event_table_ptr; /* SRAM address for event log */
+ __le32 error_event_table_ptr; /* SRAM address for error log */
+ __le32 timestamp;
+ __le32 is_valid;
+} __packed;
+
+/*
+ * REPLY_ERROR = 0x2 (response only, not a command)
+ */
+struct iwl_error_resp {
+ __le32 error_type;
+ u8 cmd_id;
+ u8 reserved1;
+ __le16 bad_cmd_seq_num;
+ __le32 error_info;
+ __le64 timestamp;
+} __packed;
+
+/******************************************************************************
+ * (1)
+ * RXON Commands & Responses:
+ *
+ *****************************************************************************/
+
+/*
+ * Rx config defines & structure
+ */
+/* rx_config device types */
+enum {
+ RXON_DEV_TYPE_AP = 1,
+ RXON_DEV_TYPE_ESS = 3,
+ RXON_DEV_TYPE_IBSS = 4,
+ RXON_DEV_TYPE_SNIFFER = 6,
+ RXON_DEV_TYPE_CP = 7,
+ RXON_DEV_TYPE_2STA = 8,
+ RXON_DEV_TYPE_P2P = 9,
+};
+
+
+#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0)
+#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0)
+#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1)
+#define RXON_RX_CHAIN_VALID_POS (1)
+#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4)
+#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
+#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10)
+#define RXON_RX_CHAIN_CNT_POS (10)
+#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12)
+#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
+#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14)
+#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
+
+/* rx_config flags */
+/* band & modulation selection */
+#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1)
+/* auto detection enable */
+#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2)
+/* TGg protection when tx */
+#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3)
+/* cck short slot & preamble */
+#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5)
+/* antenna selection */
+#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
+/* radar detection enable */
+#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13)
+/* rx response to host with 8-byte TSF
+* (according to ON_AIR deassertion) */
+#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15)
+
+
+/* HT flags */
+#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
+#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22)
+
+#define RXON_FLG_HT_OPERATING_MODE_POS (23)
+
+#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
+#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
+
+#define RXON_FLG_CHANNEL_MODE_POS (25)
+#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
+
+/* channel mode */
+enum {
+ CHANNEL_MODE_LEGACY = 0,
+ CHANNEL_MODE_PURE_40 = 1,
+ CHANNEL_MODE_MIXED = 2,
+ CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
+/* CTS to self (if spec allows) flag */
+#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30)
+
+/* rx_config filter flags */
+/* accept all data frames */
+#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0)
+/* pass control & management to host */
+#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1)
+/* accept multi-cast */
+#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2)
+/* don't decrypt uni-cast frames */
+#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3)
+/* don't decrypt multi-cast frames */
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
+/* STA is associated */
+#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5)
+/* transfer to host non bssid beacons in associated state */
+#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6)
+
+/**
+ * REPLY_RXON = 0x10 (command, has simple generic response)
+ *
+ * RXON tunes the radio tuner to a service channel, and sets up a number
+ * of parameters that are used primarily for Rx, but also for Tx operations.
+ *
+ * NOTE: When tuning to a new channel, driver must set the
+ * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent
+ * info within the device, including the station tables, tx retry
+ * rate tables, and txpower tables. Driver must build a new station
+ * table and txpower table before transmitting anything on the RXON
+ * channel.
+ *
+ * NOTE: All RXONs wipe clean the internal txpower table. Driver must
+ * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
+ * regardless of whether RXON_FILTER_ASSOC_MSK is set.
+ */
+
+struct iwl_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 rx_chain;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ u8 ofdm_ht_single_stream_basic_rates;
+ u8 ofdm_ht_dual_stream_basic_rates;
+ u8 ofdm_ht_triple_stream_basic_rates;
+ u8 reserved5;
+ __le16 acquisition_data;
+ __le16 reserved6;
+} __packed;
+
+/*
+ * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
+ */
+struct iwl_rxon_assoc_cmd {
+ __le32 flags;
+ __le32 filter_flags;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 reserved1;
+ u8 ofdm_ht_single_stream_basic_rates;
+ u8 ofdm_ht_dual_stream_basic_rates;
+ u8 ofdm_ht_triple_stream_basic_rates;
+ u8 reserved2;
+ __le16 rx_chain_select_flags;
+ __le16 acquisition_data;
+ __le32 reserved3;
+} __packed;
+
+#define IWL_CONN_MAX_LISTEN_INTERVAL 10
+#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+
+/*
+ * REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
+ */
+struct iwl_rxon_time_cmd {
+ __le64 timestamp;
+ __le16 beacon_interval;
+ __le16 atim_window;
+ __le32 beacon_init_val;
+ __le16 listen_interval;
+ u8 dtim_period;
+ u8 delta_cp_bss_tbtts;
+} __packed;
+
+/*
+ * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
+ */
+/**
+ * struct iwl5000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ * 1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl5000_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ __le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __packed;
+
+/**
+ * struct iwl6000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ * 1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl6000_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ __le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __packed;
+
+/*
+ * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
+ */
+struct iwl_csa_notification {
+ __le16 band;
+ __le16 channel;
+ __le32 status; /* 0 - OK, 1 - fail */
+} __packed;
+
+/******************************************************************************
+ * (2)
+ * Quality-of-Service (QOS) Commands & Responses:
+ *
+ *****************************************************************************/
+
+/**
+ * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM
+ * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd
+ *
+ * @cw_min: Contention window, start value in numbers of slots.
+ * Should be a power-of-2, minus 1. Device's default is 0x0f.
+ * @cw_max: Contention window, max value in numbers of slots.
+ * Should be a power-of-2, minus 1. Device's default is 0x3f.
+ * @aifsn: Number of slots in Arbitration Interframe Space (before
+ * performing random backoff timing prior to Tx). Device default 1.
+ * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
+ *
+ * Device will automatically increase contention window by (2*CW) + 1 for each
+ * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
+ * value, to cap the CW value.
+ */
+struct iwl_ac_qos {
+ __le16 cw_min;
+ __le16 cw_max;
+ u8 aifsn;
+ u8 reserved1;
+ __le16 edca_txop;
+} __packed;
+
+/* QoS flags defines */
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10)
+
+/* Number of Access Categories (AC) (EDCA), queues 0..3 */
+#define AC_NUM 4
+
+/*
+ * REPLY_QOS_PARAM = 0x13 (command, has simple generic response)
+ *
+ * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
+ * 0: Background, 1: Best Effort, 2: Video, 3: Voice.
+ */
+struct iwl_qosparam_cmd {
+ __le32 qos_flags;
+ struct iwl_ac_qos ac[AC_NUM];
+} __packed;
+
+/******************************************************************************
+ * (3)
+ * Add/Modify Stations Commands & Responses:
+ *
+ *****************************************************************************/
+/*
+ * Multi station support
+ */
+
+/* Special, dedicated locations within device's station table */
+#define IWL_AP_ID 0
+#define IWL_AP_ID_PAN 1
+#define IWL_STA_ID 2
+#define IWLAGN_PAN_BCAST_ID 14
+#define IWLAGN_BROADCAST_ID 15
+#define IWLAGN_STATION_COUNT 16
+
+#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
+
+#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
+#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
+#define STA_FLG_PAN_STATION cpu_to_le32(1 << 13)
+#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
+#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
+#define STA_FLG_MAX_AGG_SIZE_POS (19)
+#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
+#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
+#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
+#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
+
+/* Use in mode field. 1: modify existing entry, 0: add new station entry */
+#define STA_CONTROL_MODIFY_MSK 0x01
+
+/* key flags __le16*/
+#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003)
+
+#define STA_KEY_FLG_KEYID_POS 8
+#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800)
+/* wep key is either from global key (0) or from station info array (1) */
+#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008)
+
+/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
+#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000)
+#define STA_KEY_MAX_NUM 8
+#define STA_KEY_MAX_NUM_PAN 16
+/* must not match WEP_INVALID_OFFSET */
+#define IWLAGN_HW_KEY_DEFAULT 0xfe
+
+/* Flags indicate whether to modify vs. don't change various station params */
+#define STA_MODIFY_KEY_MASK 0x01
+#define STA_MODIFY_TID_DISABLE_TX 0x02
+#define STA_MODIFY_TX_RATE_MSK 0x04
+#define STA_MODIFY_ADDBA_TID_MSK 0x08
+#define STA_MODIFY_DELBA_TID_MSK 0x10
+#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20
+
+/* agn */
+struct iwl_keyinfo {
+ __le16 key_flags;
+ u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
+ u8 reserved1;
+ __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */
+ u8 key_offset;
+ u8 reserved2;
+ u8 key[16]; /* 16-byte unicast decryption key */
+ __le64 tx_secur_seq_cnt;
+ __le64 hw_tkip_mic_rx_key;
+ __le64 hw_tkip_mic_tx_key;
+} __packed;
+
+/**
+ * struct sta_id_modify
+ * @addr[ETH_ALEN]: station's MAC address
+ * @sta_id: index of station in uCode's station table
+ * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
+ *
+ * Driver selects unused table index when adding new station,
+ * or the index to a pre-existing station entry when modifying that station.
+ * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP).
+ *
+ * modify_mask flags select which parameters to modify vs. leave alone.
+ */
+struct sta_id_modify {
+ u8 addr[ETH_ALEN];
+ __le16 reserved1;
+ u8 sta_id;
+ u8 modify_mask;
+ __le16 reserved2;
+} __packed;
+
+/*
+ * REPLY_ADD_STA = 0x18 (command)
+ *
+ * The device contains an internal table of per-station information,
+ * with info on security keys, aggregation parameters, and Tx rates for
+ * initial Tx attempt and any retries (agn devices uses
+ * REPLY_TX_LINK_QUALITY_CMD,
+ *
+ * REPLY_ADD_STA sets up the table entry for one station, either creating
+ * a new entry, or modifying a pre-existing one.
+ *
+ * NOTE: RXON command (without "associated" bit set) wipes the station table
+ * clean. Moving into RF_KILL state does this also. Driver must set up
+ * new station table before transmitting anything on the RXON channel
+ * (except active scans or active measurements; those commands carry
+ * their own txpower/rate setup data).
+ *
+ * When getting started on a new channel, driver must set up the
+ * IWL_BROADCAST_ID entry (last entry in the table). For a client
+ * station in a BSS, once an AP is selected, driver sets up the AP STA
+ * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP
+ * are all that are needed for a BSS client station. If the device is
+ * used as AP, or in an IBSS network, driver must set up station table
+ * entries for all STAs in network, starting with index IWL_STA_ID.
+ */
+
+struct iwl_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct iwl_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+ __le16 legacy_reserved;
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+
+ /*
+ * Number of packets OK to transmit to station even though
+ * it is asleep -- used to synchronise PS-poll and u-APSD
+ * responses while ucode keeps track of STA sleep state.
+ */
+ __le16 sleep_tx_count;
+
+ __le16 reserved2;
+} __packed;
+
+
+#define ADD_STA_SUCCESS_MSK 0x1
+#define ADD_STA_NO_ROOM_IN_TABLE 0x2
+#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4
+#define ADD_STA_MODIFY_NON_EXIST_STA 0x8
+/*
+ * REPLY_ADD_STA = 0x18 (response)
+ */
+struct iwl_add_sta_resp {
+ u8 status; /* ADD_STA_* */
+} __packed;
+
+#define REM_STA_SUCCESS_MSK 0x1
+/*
+ * REPLY_REM_STA = 0x19 (response)
+ */
+struct iwl_rem_sta_resp {
+ u8 status;
+} __packed;
+
+/*
+ * REPLY_REM_STA = 0x19 (command)
+ */
+struct iwl_rem_sta_cmd {
+ u8 num_sta; /* number of removed stations */
+ u8 reserved[3];
+ u8 addr[ETH_ALEN]; /* MAC addr of the first station */
+ u8 reserved2[2];
+} __packed;
+
+
+/* WiFi queues mask */
+#define IWL_SCD_BK_MSK BIT(0)
+#define IWL_SCD_BE_MSK BIT(1)
+#define IWL_SCD_VI_MSK BIT(2)
+#define IWL_SCD_VO_MSK BIT(3)
+#define IWL_SCD_MGMT_MSK BIT(3)
+
+/* PAN queues mask */
+#define IWL_PAN_SCD_BK_MSK BIT(4)
+#define IWL_PAN_SCD_BE_MSK BIT(5)
+#define IWL_PAN_SCD_VI_MSK BIT(6)
+#define IWL_PAN_SCD_VO_MSK BIT(7)
+#define IWL_PAN_SCD_MGMT_MSK BIT(7)
+#define IWL_PAN_SCD_MULTICAST_MSK BIT(8)
+
+#define IWL_AGG_TX_QUEUE_MSK 0xffc00
+
+#define IWL_DROP_ALL BIT(1)
+
+/*
+ * REPLY_TXFIFO_FLUSH = 0x1e(command and response)
+ *
+ * When using full FIFO flush this command checks the scheduler HW block WR/RD
+ * pointers to check if all the frames were transferred by DMA into the
+ * relevant TX FIFO queue. Only when the DMA is finished and the queue is
+ * empty the command can finish.
+ * This command is used to flush the TXFIFO from transmit commands, it may
+ * operate on single or multiple queues, the command queue can't be flushed by
+ * this command. The command response is returned when all the queue flush
+ * operations are done. Each TX command flushed return response with the FLUSH
+ * status set in the TX response status. When FIFO flush operation is used,
+ * the flush operation ends when both the scheduler DMA done and TXFIFO empty
+ * are set.
+ *
+ * @queue_control: bit mask for which queues to flush
+ * @flush_control: flush controls
+ * 0: Dump single MSDU
+ * 1: Dump multiple MSDU according to PS, INVALID STA, TTL, TID disable.
+ * 2: Dump all FIFO
+ */
+struct iwl_txfifo_flush_cmd_v3 {
+ __le32 queue_control;
+ __le16 flush_control;
+ __le16 reserved;
+} __packed;
+
+struct iwl_txfifo_flush_cmd_v2 {
+ __le16 queue_control;
+ __le16 flush_control;
+} __packed;
+
+/*
+ * REPLY_WEP_KEY = 0x20
+ */
+struct iwl_wep_key {
+ u8 key_index;
+ u8 key_offset;
+ u8 reserved1[2];
+ u8 key_size;
+ u8 reserved2[3];
+ u8 key[16];
+} __packed;
+
+struct iwl_wep_cmd {
+ u8 num_keys;
+ u8 global_key_type;
+ u8 flags;
+ u8 reserved;
+ struct iwl_wep_key key[0];
+} __packed;
+
+#define WEP_KEY_WEP_TYPE 1
+#define WEP_KEYS_MAX 4
+#define WEP_INVALID_OFFSET 0xff
+#define WEP_KEY_LEN_64 5
+#define WEP_KEY_LEN_128 13
+
+/******************************************************************************
+ * (4)
+ * Rx Responses:
+ *
+ *****************************************************************************/
+
+#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1)
+
+#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0x70
+#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
+#define RX_RES_PHY_FLAGS_AGG_MSK cpu_to_le16(1 << 7)
+
+#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
+#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
+#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8)
+#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8)
+#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8)
+#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8)
+
+#define RX_RES_STATUS_STATION_FOUND (1<<6)
+#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7)
+
+#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11)
+#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11)
+#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11)
+#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11)
+#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11)
+
+#define RX_MPDU_RES_STATUS_ICV_OK (0x20)
+#define RX_MPDU_RES_STATUS_MIC_OK (0x40)
+#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
+#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
+
+
+#define IWLAGN_RX_RES_PHY_CNT 8
+#define IWLAGN_RX_RES_AGC_IDX 1
+#define IWLAGN_RX_RES_RSSI_AB_IDX 2
+#define IWLAGN_RX_RES_RSSI_C_IDX 3
+#define IWLAGN_OFDM_AGC_MSK 0xfe00
+#define IWLAGN_OFDM_AGC_BIT_POS 9
+#define IWLAGN_OFDM_RSSI_INBAND_A_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_A_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_A_BIT_POS 0
+#define IWLAGN_OFDM_RSSI_INBAND_B_BITMSK 0xff0000
+#define IWLAGN_OFDM_RSSI_ALLBAND_B_BITMSK 0xff000000
+#define IWLAGN_OFDM_RSSI_B_BIT_POS 16
+#define IWLAGN_OFDM_RSSI_INBAND_C_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_C_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_C_BIT_POS 0
+
+struct iwlagn_non_cfg_phy {
+ __le32 non_cfg_phy[IWLAGN_RX_RES_PHY_CNT]; /* up to 8 phy entries */
+} __packed;
+
+
+/*
+ * REPLY_RX = 0xc3 (response only, not a command)
+ * Used only for legacy (non 11n) frames.
+ */
+struct iwl_rx_phy_res {
+ u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
+ u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
+ u8 stat_id; /* configurable DSP phy data set ID */
+ u8 reserved1;
+ __le64 timestamp; /* TSF at on air rise */
+ __le32 beacon_time_stamp; /* beacon at on-air rise */
+ __le16 phy_flags; /* general phy flags: band, modulation, ... */
+ __le16 channel; /* channel number */
+ u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+ __le16 byte_count; /* frame's byte-count */
+ __le16 frame_time; /* frame's time on the air */
+} __packed;
+
+struct iwl_rx_mpdu_res_start {
+ __le16 byte_count;
+ __le16 reserved;
+} __packed;
+
+
+/******************************************************************************
+ * (5)
+ * Tx Commands & Responses:
+ *
+ * Driver must place each REPLY_TX command into one of the prioritized Tx
+ * queues in host DRAM, shared between driver and device (see comments for
+ * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode
+ * are preparing to transmit, the device pulls the Tx command over the PCI
+ * bus via one of the device's Tx DMA channels, to fill an internal FIFO
+ * from which data will be transmitted.
+ *
+ * uCode handles all timing and protocol related to control frames
+ * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler
+ * handle reception of block-acks; uCode updates the host driver via
+ * REPLY_COMPRESSED_BA.
+ *
+ * uCode handles retrying Tx when an ACK is expected but not received.
+ * This includes trying lower data rates than the one requested in the Tx
+ * command, as set up by the REPLY_TX_LINK_QUALITY_CMD (agn).
+ *
+ * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
+ * This command must be executed after every RXON command, before Tx can occur.
+ *****************************************************************************/
+
+/* REPLY_TX Tx flags field */
+
+/*
+ * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
+ * before this frame. if CTS-to-self required check
+ * RXON_FLG_SELF_CTS_EN status.
+ */
+#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0)
+
+/* 1: Expect ACK from receiving station
+ * 0: Don't expect ACK (MAC header's duration field s/b 0)
+ * Set this for unicast frames, but not broadcast/multicast. */
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
+
+/* For agn devices:
+ * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
+ * Tx command's initial_rate_index indicates first rate to try;
+ * uCode walks through table for additional Tx attempts.
+ * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
+ * This rate will be used for all Tx attempts; it will not be scaled. */
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
+
+/* 1: Expect immediate block-ack.
+ * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
+#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
+
+/* Tx antenna selection field; reserved (0) for agn devices. */
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+
+/* 1: Ignore Bluetooth priority for this frame.
+ * 0: Delay Tx until Bluetooth device is done (normal usage). */
+#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12)
+
+/* 1: uCode overrides sequence control field in MAC header.
+ * 0: Driver provides sequence control field in MAC header.
+ * Set this for management frames, non-QOS data frames, non-unicast frames,
+ * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
+
+/* 1: This frame is non-last MPDU; more fragments are coming.
+ * 0: Last fragment, or not using fragmentation. */
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
+
+/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
+ * 0: No TSF required in outgoing frame.
+ * Set this for transmitting beacons and probe responses. */
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
+
+/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
+ * alignment of frame's payload data field.
+ * 0: No pad
+ * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
+ * field (but not both). Driver must align frame data (i.e. data following
+ * MAC header) to DWORD boundary. */
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
+
+/* accelerate aggregation support
+ * 0 - no CCMP encryption; 1 - CCMP encryption */
+#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
+
+/* HCCA-AP - disable duration overwriting. */
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
+
+
+/*
+ * TX command security control
+ */
+#define TX_CMD_SEC_WEP 0x01
+#define TX_CMD_SEC_CCM 0x02
+#define TX_CMD_SEC_TKIP 0x03
+#define TX_CMD_SEC_MSK 0x03
+#define TX_CMD_SEC_SHIFT 6
+#define TX_CMD_SEC_KEY128 0x08
+
+/*
+ * REPLY_TX = 0x1c (command)
+ */
+
+/*
+ * 4965 uCode updates these Tx attempt count values in host DRAM.
+ * Used for managing Tx retries when expecting block-acks.
+ * Driver should set these fields to 0.
+ */
+struct iwl_dram_scratch {
+ u8 try_cnt; /* Tx attempts */
+ u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
+ __le16 reserved;
+} __packed;
+
+struct iwl_tx_cmd {
+ /*
+ * MPDU byte count:
+ * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+ * + 8 byte IV for CCM or TKIP (not used for WEP)
+ * + Data payload
+ * + 8-byte MIC (not used for CCM/WEP)
+ * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
+ * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+ * Range: 14-2342 bytes.
+ */
+ __le16 len;
+
+ /*
+ * MPDU or MSDU byte count for next frame.
+ * Used for fragmentation and bursting, but not 11n aggregation.
+ * Same as "len", but for next frame. Set to 0 if not applicable.
+ */
+ __le16 next_frame_len;
+
+ __le32 tx_flags; /* TX_CMD_FLG_* */
+
+ /* uCode may modify this field of the Tx command (in host DRAM!).
+ * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
+ struct iwl_dram_scratch scratch;
+
+ /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+
+ /* Index of destination station in uCode's station table */
+ u8 sta_id;
+
+ /* Type of security encryption: CCM or TKIP */
+ u8 sec_ctl; /* TX_CMD_SEC_* */
+
+ /*
+ * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial
+ * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for
+ * data frames, this field may be used to selectively reduce initial
+ * rate (via non-0 value) for special frames (e.g. management), while
+ * still supporting rate scaling for all frames.
+ */
+ u8 initial_rate_index;
+ u8 reserved;
+ u8 key[16];
+ __le16 next_frame_flags;
+ __le16 reserved2;
+ union {
+ __le32 life_time;
+ __le32 attempt;
+ } stop_time;
+
+ /* Host DRAM physical address pointer to "scratch" in this command.
+ * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */
+ __le32 dram_lsb_ptr;
+ u8 dram_msb_ptr;
+
+ u8 rts_retry_limit; /*byte 50 */
+ u8 data_retry_limit; /*byte 51 */
+ u8 tid_tspec;
+ union {
+ __le16 pm_frame_timeout;
+ __le16 attempt_duration;
+ } timeout;
+
+ /*
+ * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+ * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+ */
+ __le16 driver_txop;
+
+ /*
+ * MAC header goes here, followed by 2 bytes padding if MAC header
+ * length is 26 or 30 bytes, followed by payload data
+ */
+ u8 payload[0];
+ struct ieee80211_hdr hdr[0];
+} __packed;
+
+/*
+ * TX command response is sent after *agn* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
+enum {
+ TX_STATUS_SUCCESS = 0x01,
+ TX_STATUS_DIRECT_DONE = 0x02,
+ /* postpone TX */
+ TX_STATUS_POSTPONE_DELAY = 0x40,
+ TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+ TX_STATUS_POSTPONE_BT_PRIO = 0x42,
+ TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+ TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+ /* abort TX */
+ TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
+ TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
+ TX_STATUS_FAIL_LONG_LIMIT = 0x83,
+ TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+ TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+ TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
+ TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+ TX_STATUS_FAIL_DEST_PS = 0x88,
+ TX_STATUS_FAIL_HOST_ABORTED = 0x89,
+ TX_STATUS_FAIL_BT_RETRY = 0x8a,
+ TX_STATUS_FAIL_STA_INVALID = 0x8b,
+ TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+ TX_STATUS_FAIL_TID_DISABLE = 0x8d,
+ TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
+ TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+ TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90,
+ TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+#define TX_PACKET_MODE_REGULAR 0x0000
+#define TX_PACKET_MODE_BURST_SEQ 0x0100
+#define TX_PACKET_MODE_BURST_FIRST 0x0200
+
+enum {
+ TX_POWER_PA_NOT_ACTIVE = 0x0,
+};
+
+enum {
+ TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
+ TX_STATUS_DELAY_MSK = 0x00000040,
+ TX_STATUS_ABORT_MSK = 0x00000080,
+ TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */
+ TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */
+ TX_RESERVED = 0x00780000, /* bits 19:22 */
+ TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */
+ TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
+};
+
+/* *******************************
+ * TX aggregation status
+ ******************************* */
+
+enum {
+ AGG_TX_STATE_TRANSMITTED = 0x00,
+ AGG_TX_STATE_UNDERRUN_MSK = 0x01,
+ AGG_TX_STATE_BT_PRIO_MSK = 0x02,
+ AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
+ AGG_TX_STATE_ABORT_MSK = 0x08,
+ AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
+ AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40,
+ AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
+ AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
+ AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
+ AGG_TX_STATE_DUMP_TX_MSK = 0x200,
+ AGG_TX_STATE_DELAY_TX_MSK = 0x400
+};
+
+#define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */
+#define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */
+#define AGG_TX_TRY_POS 12
+
+#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
+ AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
+
+/* # tx attempts for first frame in aggregation */
+#define AGG_TX_STATE_TRY_CNT_POS 12
+#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
+
+/* Command ID and sequence number of Tx command for this frame */
+#define AGG_TX_STATE_SEQ_NUM_POS 16
+#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
+
+/*
+ * REPLY_TX = 0x1c (response)
+ *
+ * This response may be in one of two slightly different formats, indicated
+ * by the frame_count field:
+ *
+ * 1) No aggregation (frame_count == 1). This reports Tx results for
+ * a single frame. Multiple attempts, at various bit rates, may have
+ * been made for this frame.
+ *
+ * 2) Aggregation (frame_count > 1). This reports Tx results for
+ * 2 or more frames that used block-acknowledge. All frames were
+ * transmitted at same rate. Rate scaling may have been used if first
+ * frame in this new agg block failed in previous agg block(s).
+ *
+ * Note that, for aggregation, ACK (block-ack) status is not delivered here;
+ * block-ack has not been received by the time the agn device records
+ * this status.
+ * This status relates to reasons the tx might have been blocked or aborted
+ * within the sending station (this agn device), rather than whether it was
+ * received successfully by the destination station.
+ */
+struct agg_tx_status {
+ __le16 status;
+ __le16 sequence;
+} __packed;
+
+/*
+ * definitions for initial rate index field
+ * bits [3:0] initial rate index
+ * bits [6:4] rate table color, used for the initial rate
+ * bit-7 invalid rate indication
+ * i.e. rate was not chosen from rate table
+ * or rate table color was changed during frame retries
+ * refer tlc rate info
+ */
+
+#define IWL50_TX_RES_INIT_RATE_INDEX_POS 0
+#define IWL50_TX_RES_INIT_RATE_INDEX_MSK 0x0f
+#define IWL50_TX_RES_RATE_TABLE_COLOR_POS 4
+#define IWL50_TX_RES_RATE_TABLE_COLOR_MSK 0x70
+#define IWL50_TX_RES_INV_RATE_INDEX_MSK 0x80
+
+/* refer to ra_tid */
+#define IWLAGN_TX_RES_TID_POS 0
+#define IWLAGN_TX_RES_TID_MSK 0x0f
+#define IWLAGN_TX_RES_RA_POS 4
+#define IWLAGN_TX_RES_RA_MSK 0xf0
+
+struct iwlagn_tx_resp {
+ u8 frame_count; /* 1 no aggregation, >1 aggregation */
+ u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
+ u8 failure_rts; /* # failures due to unsuccessful RTS */
+ u8 failure_frame; /* # failures due to no ACK (unused for agg) */
+
+ /* For non-agg: Rate at which frame was successful.
+ * For agg: Rate at which all frames were transmitted. */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+
+ /* For non-agg: RTS + CTS + frame tx attempts time + ACK.
+ * For agg: RTS + CTS + aggregation tx time + block-ack time. */
+ __le16 wireless_media_time; /* uSecs */
+
+ u8 pa_status; /* RF power amplifier measurement (not used) */
+ u8 pa_integ_res_a[3];
+ u8 pa_integ_res_b[3];
+ u8 pa_integ_res_C[3];
+
+ __le32 tfd_info;
+ __le16 seq_ctl;
+ __le16 byte_cnt;
+ u8 tlc_info;
+ u8 ra_tid; /* tid (0:3), sta_id (4:7) */
+ __le16 frame_ctrl;
+ /*
+ * For non-agg: frame status TX_STATUS_*
+ * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
+ * fields follow this one, up to frame_count.
+ * Bit fields:
+ * 11- 0: AGG_TX_STATE_* status code
+ * 15-12: Retry count for 1st frame in aggregation (retries
+ * occur if tx failed for this frame when it was a
+ * member of a previous aggregation block). If rate
+ * scaling is used, retry count indicates the rate
+ * table entry used for all frames in the new agg.
+ * 31-16: Sequence # for this frame's Tx cmd (not SSN!)
+ */
+ struct agg_tx_status status; /* TX status (in aggregation -
+ * status of 1st frame) */
+} __packed;
+/*
+ * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command)
+ *
+ * Reports Block-Acknowledge from recipient station
+ */
+struct iwl_compressed_ba_resp {
+ __le32 sta_addr_lo32;
+ __le16 sta_addr_hi16;
+ __le16 reserved;
+
+ /* Index of recipient (BA-sending) station in uCode's station table */
+ u8 sta_id;
+ u8 tid;
+ __le16 seq_ctl;
+ __le64 bitmap;
+ __le16 scd_flow;
+ __le16 scd_ssn;
+ u8 txed; /* number of frames sent */
+ u8 txed_2_done; /* number of frames acked */
+ __le16 reserved1;
+} __packed;
+
+/*
+ * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response)
+ *
+ */
+
+/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
+#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
+
+/* # of EDCA prioritized tx fifos */
+#define LINK_QUAL_AC_NUM AC_NUM
+
+/* # entries in rate scale table to support Tx retries */
+#define LINK_QUAL_MAX_RETRY_NUM 16
+
+/* Tx antenna selection values */
+#define LINK_QUAL_ANT_A_MSK (1 << 0)
+#define LINK_QUAL_ANT_B_MSK (1 << 1)
+#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK)
+
+
+/**
+ * struct iwl_link_qual_general_params
+ *
+ * Used in REPLY_TX_LINK_QUALITY_CMD
+ */
+struct iwl_link_qual_general_params {
+ u8 flags;
+
+ /* No entries at or above this (driver chosen) index contain MIMO */
+ u8 mimo_delimiter;
+
+ /* Best single antenna to use for single stream (legacy, SISO). */
+ u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */
+
+ /* Best antennas to use for MIMO (unused for 4965, assumes both). */
+ u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */
+
+ /*
+ * If driver needs to use different initial rates for different
+ * EDCA QOS access categories (as implemented by tx fifos 0-3),
+ * this table will set that up, by indicating the indexes in the
+ * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
+ * Otherwise, driver should set all entries to 0.
+ *
+ * Entry usage:
+ * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
+ * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
+ */
+ u8 start_rate_index[LINK_QUAL_AC_NUM];
+} __packed;
+
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
+
+/**
+ * struct iwl_link_qual_agg_params
+ *
+ * Used in REPLY_TX_LINK_QUALITY_CMD
+ */
+struct iwl_link_qual_agg_params {
+
+ /*
+ *Maximum number of uSec in aggregation.
+ * default set to 4000 (4 milliseconds) if not configured in .cfg
+ */
+ __le16 agg_time_limit;
+
+ /*
+ * Number of Tx retries allowed for a frame, before that frame will
+ * no longer be considered for the start of an aggregation sequence
+ * (scheduler will then try to tx it as single frame).
+ * Driver should set this to 3.
+ */
+ u8 agg_dis_start_th;
+
+ /*
+ * Maximum number of frames in aggregation.
+ * 0 = no limit (default). 1 = no aggregation.
+ * Other values = max # frames in aggregation.
+ */
+ u8 agg_frame_cnt_limit;
+
+ __le32 reserved;
+} __packed;
+
+/*
+ * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response)
+ *
+ * For agn devices
+ *
+ * Each station in the agn device's internal station table has its own table
+ * of 16
+ * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when
+ * an ACK is not received. This command replaces the entire table for
+ * one station.
+ *
+ * NOTE: Station must already be in agn device's station table.
+ * Use REPLY_ADD_STA.
+ *
+ * The rate scaling procedures described below work well. Of course, other
+ * procedures are possible, and may work better for particular environments.
+ *
+ *
+ * FILLING THE RATE TABLE
+ *
+ * Given a particular initial rate and mode, as determined by the rate
+ * scaling algorithm described below, the Linux driver uses the following
+ * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the
+ * Link Quality command:
+ *
+ *
+ * 1) If using High-throughput (HT) (SISO or MIMO) initial rate:
+ * a) Use this same initial rate for first 3 entries.
+ * b) Find next lower available rate using same mode (SISO or MIMO),
+ * use for next 3 entries. If no lower rate available, switch to
+ * legacy mode (no HT40 channel, no MIMO, no short guard interval).
+ * c) If using MIMO, set command's mimo_delimiter to number of entries
+ * using MIMO (3 or 6).
+ * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
+ * no MIMO, no short guard interval), at the next lower bit rate
+ * (e.g. if second HT bit rate was 54, try 48 legacy), and follow
+ * legacy procedure for remaining table entries.
+ *
+ * 2) If using legacy initial rate:
+ * a) Use the initial rate for only one entry.
+ * b) For each following entry, reduce the rate to next lower available
+ * rate, until reaching the lowest available rate.
+ * c) When reducing rate, also switch antenna selection.
+ * d) Once lowest available rate is reached, repeat this rate until
+ * rate table is filled (16 entries), switching antenna each entry.
+ *
+ *
+ * ACCUMULATING HISTORY
+ *
+ * The rate scaling algorithm for agn devices, as implemented in Linux driver,
+ * uses two sets of frame Tx success history: One for the current/active
+ * modulation mode, and one for a speculative/search mode that is being
+ * attempted. If the speculative mode turns out to be more effective (i.e.
+ * actual transfer rate is better), then the driver continues to use the
+ * speculative mode as the new current active mode.
+ *
+ * Each history set contains, separately for each possible rate, data for a
+ * sliding window of the 62 most recent tx attempts at that rate. The data
+ * includes a shifting bitmap of success(1)/failure(0), and sums of successful
+ * and attempted frames, from which the driver can additionally calculate a
+ * success ratio (success / attempted) and number of failures
+ * (attempted - success), and control the size of the window (attempted).
+ * The driver uses the bit map to remove successes from the success sum, as
+ * the oldest tx attempts fall out of the window.
+ *
+ * When the agn device makes multiple tx attempts for a given frame, each
+ * attempt might be at a different rate, and have different modulation
+ * characteristics (e.g. antenna, fat channel, short guard interval), as set
+ * up in the rate scaling table in the Link Quality command. The driver must
+ * determine which rate table entry was used for each tx attempt, to determine
+ * which rate-specific history to update, and record only those attempts that
+ * match the modulation characteristics of the history set.
+ *
+ * When using block-ack (aggregation), all frames are transmitted at the same
+ * rate, since there is no per-attempt acknowledgment from the destination
+ * station. The Tx response struct iwl_tx_resp indicates the Tx rate in
+ * rate_n_flags field. After receiving a block-ack, the driver can update
+ * history for the entire block all at once.
+ *
+ *
+ * FINDING BEST STARTING RATE:
+ *
+ * When working with a selected initial modulation mode (see below), the
+ * driver attempts to find a best initial rate. The initial rate is the
+ * first entry in the Link Quality command's rate table.
+ *
+ * 1) Calculate actual throughput (success ratio * expected throughput, see
+ * table below) for current initial rate. Do this only if enough frames
+ * have been attempted to make the value meaningful: at least 6 failed
+ * tx attempts, or at least 8 successes. If not enough, don't try rate
+ * scaling yet.
+ *
+ * 2) Find available rates adjacent to current initial rate. Available means:
+ * a) supported by hardware &&
+ * b) supported by association &&
+ * c) within any constraints selected by user
+ *
+ * 3) Gather measured throughputs for adjacent rates. These might not have
+ * enough history to calculate a throughput. That's okay, we might try
+ * using one of them anyway!
+ *
+ * 4) Try decreasing rate if, for current rate:
+ * a) success ratio is < 15% ||
+ * b) lower adjacent rate has better measured throughput ||
+ * c) higher adjacent rate has worse throughput, and lower is unmeasured
+ *
+ * As a sanity check, if decrease was determined above, leave rate
+ * unchanged if:
+ * a) lower rate unavailable
+ * b) success ratio at current rate > 85% (very good)
+ * c) current measured throughput is better than expected throughput
+ * of lower rate (under perfect 100% tx conditions, see table below)
+ *
+ * 5) Try increasing rate if, for current rate:
+ * a) success ratio is < 15% ||
+ * b) both adjacent rates' throughputs are unmeasured (try it!) ||
+ * b) higher adjacent rate has better measured throughput ||
+ * c) lower adjacent rate has worse throughput, and higher is unmeasured
+ *
+ * As a sanity check, if increase was determined above, leave rate
+ * unchanged if:
+ * a) success ratio at current rate < 70%. This is not particularly
+ * good performance; higher rate is sure to have poorer success.
+ *
+ * 6) Re-evaluate the rate after each tx frame. If working with block-
+ * acknowledge, history and statistics may be calculated for the entire
+ * block (including prior history that fits within the history windows),
+ * before re-evaluation.
+ *
+ * FINDING BEST STARTING MODULATION MODE:
+ *
+ * After working with a modulation mode for a "while" (and doing rate scaling),
+ * the driver searches for a new initial mode in an attempt to improve
+ * throughput. The "while" is measured by numbers of attempted frames:
+ *
+ * For legacy mode, search for new mode after:
+ * 480 successful frames, or 160 failed frames
+ * For high-throughput modes (SISO or MIMO), search for new mode after:
+ * 4500 successful frames, or 400 failed frames
+ *
+ * Mode switch possibilities are (3 for each mode):
+ *
+ * For legacy:
+ * Change antenna, try SISO (if HT association), try MIMO (if HT association)
+ * For SISO:
+ * Change antenna, try MIMO, try shortened guard interval (SGI)
+ * For MIMO:
+ * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI)
+ *
+ * When trying a new mode, use the same bit rate as the old/current mode when
+ * trying antenna switches and shortened guard interval. When switching to
+ * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate
+ * for which the expected throughput (under perfect conditions) is about the
+ * same or slightly better than the actual measured throughput delivered by
+ * the old/current mode.
+ *
+ * Actual throughput can be estimated by multiplying the expected throughput
+ * by the success ratio (successful / attempted tx frames). Frame size is
+ * not considered in this calculation; it assumes that frame size will average
+ * out to be fairly consistent over several samples. The following are
+ * metric values for expected throughput assuming 100% success ratio.
+ * Only G band has support for CCK rates:
+ *
+ * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60
+ *
+ * G: 7 13 35 58 40 57 72 98 121 154 177 186 186
+ * A: 0 0 0 0 40 57 72 98 121 154 177 186 186
+ * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202
+ * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211
+ * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251
+ * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257
+ * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257
+ * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264
+ * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289
+ * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293
+ *
+ * After the new mode has been tried for a short while (minimum of 6 failed
+ * frames or 8 successful frames), compare success ratio and actual throughput
+ * estimate of the new mode with the old. If either is better with the new
+ * mode, continue to use the new mode.
+ *
+ * Continue comparing modes until all 3 possibilities have been tried.
+ * If moving from legacy to HT, try all 3 possibilities from the new HT
+ * mode. After trying all 3, a best mode is found. Continue to use this mode
+ * for the longer "while" described above (e.g. 480 successful frames for
+ * legacy), and then repeat the search process.
+ *
+ */
+struct iwl_link_quality_cmd {
+
+ /* Index of destination/recipient station in uCode's station table */
+ u8 sta_id;
+ u8 reserved1;
+ __le16 control; /* not used */
+ struct iwl_link_qual_general_params general_params;
+ struct iwl_link_qual_agg_params agg_params;
+
+ /*
+ * Rate info; when using rate-scaling, Tx command's initial_rate_index
+ * specifies 1st Tx rate attempted, via index into this table.
+ * agn devices works its way through table when retrying Tx.
+ */
+ struct {
+ __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */
+ } rs_table[LINK_QUAL_MAX_RETRY_NUM];
+ __le32 reserved2;
+} __packed;
+
+/*
+ * BT configuration enable flags:
+ * bit 0 - 1: BT channel announcement enabled
+ * 0: disable
+ * bit 1 - 1: priority of BT device enabled
+ * 0: disable
+ * bit 2 - 1: BT 2 wire support enabled
+ * 0: disable
+ */
+#define BT_COEX_DISABLE (0x0)
+#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0)
+#define BT_ENABLE_PRIORITY BIT(1)
+#define BT_ENABLE_2_WIRE BIT(2)
+
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY)
+
+#define BT_LEAD_TIME_MIN (0x0)
+#define BT_LEAD_TIME_DEF (0x1E)
+#define BT_LEAD_TIME_MAX (0xFF)
+
+#define BT_MAX_KILL_MIN (0x1)
+#define BT_MAX_KILL_DEF (0x5)
+#define BT_MAX_KILL_MAX (0xFF)
+
+#define BT_DURATION_LIMIT_DEF 625
+#define BT_DURATION_LIMIT_MAX 1250
+#define BT_DURATION_LIMIT_MIN 625
+
+#define BT_ON_THRESHOLD_DEF 4
+#define BT_ON_THRESHOLD_MAX 1000
+#define BT_ON_THRESHOLD_MIN 1
+
+#define BT_FRAG_THRESHOLD_DEF 0
+#define BT_FRAG_THRESHOLD_MAX 0
+#define BT_FRAG_THRESHOLD_MIN 0
+
+#define BT_AGG_THRESHOLD_DEF 1200
+#define BT_AGG_THRESHOLD_MAX 8000
+#define BT_AGG_THRESHOLD_MIN 400
+
+/*
+ * REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
+ *
+ * agn devices support hardware handshake with Bluetooth device on
+ * same platform. Bluetooth device alerts wireless device when it will Tx;
+ * wireless device can delay or kill its own Tx to accommodate.
+ */
+struct iwl_bt_cmd {
+ u8 flags;
+ u8 lead_time;
+ u8 max_kill;
+ u8 reserved;
+ __le32 kill_ack_mask;
+ __le32 kill_cts_mask;
+} __packed;
+
+#define IWLAGN_BT_FLAG_CHANNEL_INHIBITION BIT(0)
+
+#define IWLAGN_BT_FLAG_COEX_MODE_MASK (BIT(3)|BIT(4)|BIT(5))
+#define IWLAGN_BT_FLAG_COEX_MODE_SHIFT 3
+#define IWLAGN_BT_FLAG_COEX_MODE_DISABLED 0
+#define IWLAGN_BT_FLAG_COEX_MODE_LEGACY_2W 1
+#define IWLAGN_BT_FLAG_COEX_MODE_3W 2
+#define IWLAGN_BT_FLAG_COEX_MODE_4W 3
+
+#define IWLAGN_BT_FLAG_UCODE_DEFAULT BIT(6)
+/* Disable Sync PSPoll on SCO/eSCO */
+#define IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE BIT(7)
+
+#define IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD -75 /* dBm */
+#define IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD -65 /* dBm */
+
+#define IWLAGN_BT_PRIO_BOOST_MAX 0xFF
+#define IWLAGN_BT_PRIO_BOOST_MIN 0x00
+#define IWLAGN_BT_PRIO_BOOST_DEFAULT 0xF0
+#define IWLAGN_BT_PRIO_BOOST_DEFAULT32 0xF0F0F0F0
+
+#define IWLAGN_BT_MAX_KILL_DEFAULT 5
+
+#define IWLAGN_BT3_T7_DEFAULT 1
+
+enum iwl_bt_kill_idx {
+ IWL_BT_KILL_DEFAULT = 0,
+ IWL_BT_KILL_OVERRIDE = 1,
+ IWL_BT_KILL_REDUCE = 2,
+};
+
+#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO cpu_to_le32(0xffffffff)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE cpu_to_le32(0)
+
+#define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT 2
+
+#define IWLAGN_BT3_T2_DEFAULT 0xc
+
+#define IWLAGN_BT_VALID_ENABLE_FLAGS cpu_to_le16(BIT(0))
+#define IWLAGN_BT_VALID_BOOST cpu_to_le16(BIT(1))
+#define IWLAGN_BT_VALID_MAX_KILL cpu_to_le16(BIT(2))
+#define IWLAGN_BT_VALID_3W_TIMERS cpu_to_le16(BIT(3))
+#define IWLAGN_BT_VALID_KILL_ACK_MASK cpu_to_le16(BIT(4))
+#define IWLAGN_BT_VALID_KILL_CTS_MASK cpu_to_le16(BIT(5))
+#define IWLAGN_BT_VALID_REDUCED_TX_PWR cpu_to_le16(BIT(6))
+#define IWLAGN_BT_VALID_3W_LUT cpu_to_le16(BIT(7))
+
+#define IWLAGN_BT_ALL_VALID_MSK (IWLAGN_BT_VALID_ENABLE_FLAGS | \
+ IWLAGN_BT_VALID_BOOST | \
+ IWLAGN_BT_VALID_MAX_KILL | \
+ IWLAGN_BT_VALID_3W_TIMERS | \
+ IWLAGN_BT_VALID_KILL_ACK_MASK | \
+ IWLAGN_BT_VALID_KILL_CTS_MASK | \
+ IWLAGN_BT_VALID_REDUCED_TX_PWR | \
+ IWLAGN_BT_VALID_3W_LUT)
+
+#define IWLAGN_BT_REDUCED_TX_PWR BIT(0)
+
+#define IWLAGN_BT_DECISION_LUT_SIZE 12
+
+struct iwl_basic_bt_cmd {
+ u8 flags;
+ u8 ledtime; /* unused */
+ u8 max_kill;
+ u8 bt3_timer_t7_value;
+ __le32 kill_ack_mask;
+ __le32 kill_cts_mask;
+ u8 bt3_prio_sample_time;
+ u8 bt3_timer_t2_value;
+ __le16 bt4_reaction_time; /* unused */
+ __le32 bt3_lookup_table[IWLAGN_BT_DECISION_LUT_SIZE];
+ /*
+ * bit 0: use reduced tx power for control frame
+ * bit 1 - 7: reserved
+ */
+ u8 reduce_txpower;
+ u8 reserved;
+ __le16 valid;
+};
+
+struct iwl_bt_cmd_v1 {
+ struct iwl_basic_bt_cmd basic;
+ u8 prio_boost;
+ /*
+ * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
+ * if configure the following patterns
+ */
+ u8 tx_prio_boost; /* SW boost of WiFi tx priority */
+ __le16 rx_prio_boost; /* SW boost of WiFi rx priority */
+};
+
+struct iwl_bt_cmd_v2 {
+ struct iwl_basic_bt_cmd basic;
+ __le32 prio_boost;
+ /*
+ * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
+ * if configure the following patterns
+ */
+ u8 reserved;
+ u8 tx_prio_boost; /* SW boost of WiFi tx priority */
+ __le16 rx_prio_boost; /* SW boost of WiFi rx priority */
+};
+
+#define IWLAGN_BT_SCO_ACTIVE cpu_to_le32(BIT(0))
+
+struct iwlagn_bt_sco_cmd {
+ __le32 flags;
+};
+
+/******************************************************************************
+ * (6)
+ * Spectrum Management (802.11h) Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/*
+ * Spectrum Management
+ */
+#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \
+ RXON_FILTER_CTL2HOST_MSK | \
+ RXON_FILTER_ACCEPT_GRP_MSK | \
+ RXON_FILTER_DIS_DECRYPT_MSK | \
+ RXON_FILTER_DIS_GRP_DECRYPT_MSK | \
+ RXON_FILTER_ASSOC_MSK | \
+ RXON_FILTER_BCON_AWARE_MSK)
+
+struct iwl_measure_channel {
+ __le32 duration; /* measurement duration in extended beacon
+ * format */
+ u8 channel; /* channel to measure */
+ u8 type; /* see enum iwl_measure_type */
+ __le16 reserved;
+} __packed;
+
+/*
+ * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
+ */
+struct iwl_spectrum_cmd {
+ __le16 len; /* number of bytes starting from token */
+ u8 token; /* token id */
+ u8 id; /* measurement id -- 0 or 1 */
+ u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */
+ u8 periodic; /* 1 = periodic */
+ __le16 path_loss_timeout;
+ __le32 start_time; /* start time in extended beacon format */
+ __le32 reserved2;
+ __le32 flags; /* rxon flags */
+ __le32 filter_flags; /* rxon filter flags */
+ __le16 channel_count; /* minimum 1, maximum 10 */
+ __le16 reserved3;
+ struct iwl_measure_channel channels[10];
+} __packed;
+
+/*
+ * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
+ */
+struct iwl_spectrum_resp {
+ u8 token;
+ u8 id; /* id of the prior command replaced, or 0xff */
+ __le16 status; /* 0 - command will be handled
+ * 1 - cannot handle (conflicts with another
+ * measurement) */
+} __packed;
+
+enum iwl_measurement_state {
+ IWL_MEASUREMENT_START = 0,
+ IWL_MEASUREMENT_STOP = 1,
+};
+
+enum iwl_measurement_status {
+ IWL_MEASUREMENT_OK = 0,
+ IWL_MEASUREMENT_CONCURRENT = 1,
+ IWL_MEASUREMENT_CSA_CONFLICT = 2,
+ IWL_MEASUREMENT_TGH_CONFLICT = 3,
+ /* 4-5 reserved */
+ IWL_MEASUREMENT_STOPPED = 6,
+ IWL_MEASUREMENT_TIMEOUT = 7,
+ IWL_MEASUREMENT_PERIODIC_FAILED = 8,
+};
+
+#define NUM_ELEMENTS_IN_HISTOGRAM 8
+
+struct iwl_measurement_histogram {
+ __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
+ __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
+} __packed;
+
+/* clear channel availability counters */
+struct iwl_measurement_cca_counters {
+ __le32 ofdm;
+ __le32 cck;
+} __packed;
+
+enum iwl_measure_type {
+ IWL_MEASURE_BASIC = (1 << 0),
+ IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
+ IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
+ IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
+ IWL_MEASURE_FRAME = (1 << 4),
+ /* bits 5:6 are reserved */
+ IWL_MEASURE_IDLE = (1 << 7),
+};
+
+/*
+ * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
+ */
+struct iwl_spectrum_notification {
+ u8 id; /* measurement id -- 0 or 1 */
+ u8 token;
+ u8 channel_index; /* index in measurement channel list */
+ u8 state; /* 0 - start, 1 - stop */
+ __le32 start_time; /* lower 32-bits of TSF */
+ u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
+ u8 channel;
+ u8 type; /* see enum iwl_measurement_type */
+ u8 reserved1;
+ /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
+ * valid if applicable for measurement type requested. */
+ __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */
+ __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */
+ __le32 cca_time; /* channel load time in usecs */
+ u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
+ * unidentified */
+ u8 reserved2[3];
+ struct iwl_measurement_histogram histogram;
+ __le32 stop_time; /* lower 32-bits of TSF */
+ __le32 status; /* see iwl_measurement_status */
+} __packed;
+
+/******************************************************************************
+ * (7)
+ * Power Management Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/**
+ * struct iwl_powertable_cmd - Power Table Command
+ * @flags: See below:
+ *
+ * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
+ *
+ * PM allow:
+ * bit 0 - '0' Driver not allow power management
+ * '1' Driver allow PM (use rest of parameters)
+ *
+ * uCode send sleep notifications:
+ * bit 1 - '0' Don't send sleep notification
+ * '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
+ * Sleep over DTIM
+ * bit 2 - '0' PM have to walk up every DTIM
+ * '1' PM could sleep over DTIM till listen Interval.
+ *
+ * PCI power managed
+ * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
+ * '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ * bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
+ * Force sleep Modes
+ * bit 31/30- '00' use both mac/xtal sleeps
+ * '01' force Mac sleep
+ * '10' force xtal sleep
+ * '11' Illegal set
+ *
+ * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
+ * for every DTIM.
+ */
+#define IWL_POWER_VEC_SIZE 5
+
+#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_SAVE_ENA_MSK cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_MANAGEMENT_ENA_MSK cpu_to_le16(BIT(1))
+#define IWL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2))
+#define IWL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
+#define IWL_POWER_FAST_PD cpu_to_le16(BIT(4))
+#define IWL_POWER_BEACON_FILTERING cpu_to_le16(BIT(5))
+#define IWL_POWER_SHADOW_REG_ENA cpu_to_le16(BIT(6))
+#define IWL_POWER_CT_KILL_SET cpu_to_le16(BIT(7))
+#define IWL_POWER_BT_SCO_ENA cpu_to_le16(BIT(8))
+#define IWL_POWER_ADVANCE_PM_ENA_MSK cpu_to_le16(BIT(9))
+
+struct iwl_powertable_cmd {
+ __le16 flags;
+ u8 keep_alive_seconds;
+ u8 debug_flags;
+ __le32 rx_data_timeout;
+ __le32 tx_data_timeout;
+ __le32 sleep_interval[IWL_POWER_VEC_SIZE];
+ __le32 keep_alive_beacons;
+} __packed;
+
+/*
+ * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
+ * all devices identical.
+ */
+struct iwl_sleep_notification {
+ u8 pm_sleep_mode;
+ u8 pm_wakeup_src;
+ __le16 reserved;
+ __le32 sleep_time;
+ __le32 tsf_low;
+ __le32 bcon_timer;
+} __packed;
+
+/* Sleep states. all devices identical. */
+enum {
+ IWL_PM_NO_SLEEP = 0,
+ IWL_PM_SLP_MAC = 1,
+ IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
+ IWL_PM_SLP_FULL_MAC_CARD_STATE = 3,
+ IWL_PM_SLP_PHY = 4,
+ IWL_PM_SLP_REPENT = 5,
+ IWL_PM_WAKEUP_BY_TIMER = 6,
+ IWL_PM_WAKEUP_BY_DRIVER = 7,
+ IWL_PM_WAKEUP_BY_RFKILL = 8,
+ /* 3 reserved */
+ IWL_PM_NUM_OF_MODES = 12,
+};
+
+/*
+ * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response)
+ */
+#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */
+#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */
+#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */
+struct iwl_card_state_cmd {
+ __le32 status; /* CARD_STATE_CMD_* request new power state */
+} __packed;
+
+/*
+ * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
+ */
+struct iwl_card_state_notif {
+ __le32 flags;
+} __packed;
+
+#define HW_CARD_DISABLED 0x01
+#define SW_CARD_DISABLED 0x02
+#define CT_CARD_DISABLED 0x04
+#define RXON_CARD_DISABLED 0x10
+
+struct iwl_ct_kill_config {
+ __le32 reserved;
+ __le32 critical_temperature_M;
+ __le32 critical_temperature_R;
+} __packed;
+
+/* 1000, and 6x00 */
+struct iwl_ct_kill_throttling_config {
+ __le32 critical_temperature_exit;
+ __le32 reserved;
+ __le32 critical_temperature_enter;
+} __packed;
+
+/******************************************************************************
+ * (8)
+ * Scan Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
+#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
+
+/**
+ * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
+ *
+ * One for each channel in the scan list.
+ * Each channel can independently select:
+ * 1) SSID for directed active scans
+ * 2) Txpower setting (for rate specified within Tx command)
+ * 3) How long to stay on-channel (behavior may be modified by quiet_time,
+ * quiet_plcp_th, good_CRC_th)
+ *
+ * To avoid uCode errors, make sure the following are true (see comments
+ * under struct iwl_scan_cmd about max_out_time and quiet_time):
+ * 1) If using passive_dwell (i.e. passive_dwell != 0):
+ * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
+ * 2) quiet_time <= active_dwell
+ * 3) If restricting off-channel time (i.e. max_out_time !=0):
+ * passive_dwell < max_out_time
+ * active_dwell < max_out_time
+ */
+
+struct iwl_scan_channel {
+ /*
+ * type is defined as:
+ * 0:0 1 = active, 0 = passive
+ * 1:20 SSID direct bit map; if a bit is set, then corresponding
+ * SSID IE is transmitted in probe request.
+ * 21:31 reserved
+ */
+ __le32 type;
+ __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
+ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
+ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
+} __packed;
+
+/* set number of direct probes __le32 type */
+#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
+/**
+ * struct iwl_ssid_ie - directed scan network information element
+ *
+ * Up to 20 of these may appear in REPLY_SCAN_CMD,
+ * selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 entries.
+ * SSID IEs get transmitted in reverse order of entry.
+ */
+struct iwl_ssid_ie {
+ u8 id;
+ u8 len;
+ u8 ssid[32];
+} __packed;
+
+#define PROBE_OPTION_MAX 20
+#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
+#define IWL_GOOD_CRC_TH_DISABLED 0
+#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
+#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
+#define IWL_MAX_CMD_SIZE 4096
+
+/*
+ * REPLY_SCAN_CMD = 0x80 (command)
+ *
+ * The hardware scan command is very powerful; the driver can set it up to
+ * maintain (relatively) normal network traffic while doing a scan in the
+ * background. The max_out_time and suspend_time control the ratio of how
+ * long the device stays on an associated network channel ("service channel")
+ * vs. how long it's away from the service channel, i.e. tuned to other channels
+ * for scanning.
+ *
+ * max_out_time is the max time off-channel (in usec), and suspend_time
+ * is how long (in "extended beacon" format) that the scan is "suspended"
+ * after returning to the service channel. That is, suspend_time is the
+ * time that we stay on the service channel, doing normal work, between
+ * scan segments. The driver may set these parameters differently to support
+ * scanning when associated vs. not associated, and light vs. heavy traffic
+ * loads when associated.
+ *
+ * After receiving this command, the device's scan engine does the following;
+ *
+ * 1) Sends SCAN_START notification to driver
+ * 2) Checks to see if it has time to do scan for one channel
+ * 3) Sends NULL packet, with power-save (PS) bit set to 1,
+ * to tell AP that we're going off-channel
+ * 4) Tunes to first channel in scan list, does active or passive scan
+ * 5) Sends SCAN_RESULT notification to driver
+ * 6) Checks to see if it has time to do scan on *next* channel in list
+ * 7) Repeats 4-6 until it no longer has time to scan the next channel
+ * before max_out_time expires
+ * 8) Returns to service channel
+ * 9) Sends NULL packet with PS=0 to tell AP that we're back
+ * 10) Stays on service channel until suspend_time expires
+ * 11) Repeats entire process 2-10 until list is complete
+ * 12) Sends SCAN_COMPLETE notification
+ *
+ * For fast, efficient scans, the scan command also has support for staying on
+ * a channel for just a short time, if doing active scanning and getting no
+ * responses to the transmitted probe request. This time is controlled by
+ * quiet_time, and the number of received packets below which a channel is
+ * considered "quiet" is controlled by quiet_plcp_threshold.
+ *
+ * For active scanning on channels that have regulatory restrictions against
+ * blindly transmitting, the scan can listen before transmitting, to make sure
+ * that there is already legitimate activity on the channel. If enough
+ * packets are cleanly received on the channel (controlled by good_CRC_th,
+ * typical value 1), the scan engine starts transmitting probe requests.
+ *
+ * Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
+ *
+ * To avoid uCode errors, see timing restrictions described under
+ * struct iwl_scan_channel.
+ */
+
+enum iwl_scan_flags {
+ /* BIT(0) currently unused */
+ IWL_SCAN_FLAGS_ACTION_FRAME_TX = BIT(1),
+ /* bits 2-7 reserved */
+};
+
+struct iwl_scan_cmd {
+ __le16 len;
+ u8 scan_flags; /* scan flags: see enum iwl_scan_flags */
+ u8 channel_count; /* # channels in channel list */
+ __le16 quiet_time; /* dwell only this # millisecs on quiet channel
+ * (only for active scan) */
+ __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
+ __le16 good_CRC_th; /* passive -> active promotion threshold */
+ __le16 rx_chain; /* RXON_RX_CHAIN_* */
+ __le32 max_out_time; /* max usec to be away from associated (service)
+ * channel */
+ __le32 suspend_time; /* pause scan this long (in "extended beacon
+ * format") when returning to service chnl:
+ */
+ __le32 flags; /* RXON_FLG_* */
+ __le32 filter_flags; /* RXON_FILTER_* */
+
+ /* For active scans (set to all-0s for passive scans).
+ * Does not include payload. Must specify Tx rate; no rate scaling. */
+ struct iwl_tx_cmd tx_cmd;
+
+ /* For directed active scans (set to all-0s otherwise) */
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct iwl_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __packed;
+
+/* Can abort will notify by complete notification with abort status. */
+#define CAN_ABORT_STATUS cpu_to_le32(0x1)
+/* complete notification statuses */
+#define ABORT_STATUS 0x2
+
+/*
+ * REPLY_SCAN_CMD = 0x80 (response)
+ */
+struct iwl_scanreq_notification {
+ __le32 status; /* 1: okay, 2: cannot fulfill request */
+} __packed;
+
+/*
+ * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
+ */
+struct iwl_scanstart_notification {
+ __le32 tsf_low;
+ __le32 tsf_high;
+ __le32 beacon_timer;
+ u8 channel;
+ u8 band;
+ u8 reserved[2];
+ __le32 status;
+} __packed;
+
+#define SCAN_OWNER_STATUS 0x1
+#define MEASURE_OWNER_STATUS 0x2
+
+#define IWL_PROBE_STATUS_OK 0
+#define IWL_PROBE_STATUS_TX_FAILED BIT(0)
+/* error statuses combined with TX_FAILED */
+#define IWL_PROBE_STATUS_FAIL_TTL BIT(1)
+#define IWL_PROBE_STATUS_FAIL_BT BIT(2)
+
+#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */
+/*
+ * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
+ */
+struct iwl_scanresults_notification {
+ u8 channel;
+ u8 band;
+ u8 probe_status;
+ u8 num_probe_not_sent; /* not enough time to send */
+ __le32 tsf_low;
+ __le32 tsf_high;
+ __le32 statistics[NUMBER_OF_STATISTICS];
+} __packed;
+
+/*
+ * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
+ */
+struct iwl_scancomplete_notification {
+ u8 scanned_channels;
+ u8 status;
+ u8 bt_status; /* BT On/Off status */
+ u8 last_channel;
+ __le32 tsf_low;
+ __le32 tsf_high;
+} __packed;
+
+
+/******************************************************************************
+ * (9)
+ * IBSS/AP Commands and Notifications:
+ *
+ *****************************************************************************/
+
+enum iwl_ibss_manager {
+ IWL_NOT_IBSS_MANAGER = 0,
+ IWL_IBSS_MANAGER = 1,
+};
+
+/*
+ * BEACON_NOTIFICATION = 0x90 (notification only, not a command)
+ */
+
+struct iwlagn_beacon_notif {
+ struct iwlagn_tx_resp beacon_notify_hdr;
+ __le32 low_tsf;
+ __le32 high_tsf;
+ __le32 ibss_mgr_status;
+} __packed;
+
+/*
+ * REPLY_TX_BEACON = 0x91 (command, has simple generic response)
+ */
+
+struct iwl_tx_beacon_cmd {
+ struct iwl_tx_cmd tx;
+ __le16 tim_idx;
+ u8 tim_size;
+ u8 reserved1;
+ struct ieee80211_hdr frame[0]; /* beacon frame */
+} __packed;
+
+/******************************************************************************
+ * (10)
+ * Statistics Commands and Notifications:
+ *
+ *****************************************************************************/
+
+#define IWL_TEMP_CONVERT 260
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
+
+/* Used for passing to driver number of successes and failures per rate */
+struct rate_histogram {
+ union {
+ __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } success;
+ union {
+ __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } failed;
+} __packed;
+
+/* statistics command response */
+
+struct statistics_dbg {
+ __le32 burst_check;
+ __le32 burst_count;
+ __le32 wait_for_silence_timeout_cnt;
+ __le32 reserved[3];
+} __packed;
+
+struct statistics_rx_phy {
+ __le32 ina_cnt;
+ __le32 fina_cnt;
+ __le32 plcp_err;
+ __le32 crc32_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 false_alarm_cnt;
+ __le32 fina_sync_err_cnt;
+ __le32 sfd_timeout;
+ __le32 fina_timeout;
+ __le32 unresponded_rts;
+ __le32 rxe_frame_limit_overrun;
+ __le32 sent_ack_cnt;
+ __le32 sent_cts_cnt;
+ __le32 sent_ba_rsp_cnt;
+ __le32 dsp_self_kill;
+ __le32 mh_format_err;
+ __le32 re_acq_main_rssi_sum;
+ __le32 reserved3;
+} __packed;
+
+struct statistics_rx_ht_phy {
+ __le32 plcp_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 crc32_err;
+ __le32 mh_format_err;
+ __le32 agg_crc32_good;
+ __le32 agg_mpdu_cnt;
+ __le32 agg_cnt;
+ __le32 unsupport_mcs;
+} __packed;
+
+#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1)
+
+struct statistics_rx_non_phy {
+ __le32 bogus_cts; /* CTS received when not expecting CTS */
+ __le32 bogus_ack; /* ACK received when not expecting ACK */
+ __le32 non_bssid_frames; /* number of frames with BSSID that
+ * doesn't belong to the STA BSSID */
+ __le32 filtered_frames; /* count frames that were dumped in the
+ * filtering process */
+ __le32 non_channel_beacons; /* beacons with our bss id but not on
+ * our serving channel */
+ __le32 channel_beacons; /* beacons with our bss id and in our
+ * serving channel */
+ __le32 num_missed_bcon; /* number of missed beacons */
+ __le32 adc_rx_saturation_time; /* count in 0.8us units the time the
+ * ADC was in saturation */
+ __le32 ina_detection_search_time;/* total time (in 0.8us) searched
+ * for INA */
+ __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */
+ __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */
+ __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */
+ __le32 interference_data_flag; /* flag for interference data
+ * availability. 1 when data is
+ * available. */
+ __le32 channel_load; /* counts RX Enable time in uSec */
+ __le32 dsp_false_alarms; /* DSP false alarm (both OFDM
+ * and CCK) counter */
+ __le32 beacon_rssi_a;
+ __le32 beacon_rssi_b;
+ __le32 beacon_rssi_c;
+ __le32 beacon_energy_a;
+ __le32 beacon_energy_b;
+ __le32 beacon_energy_c;
+} __packed;
+
+struct statistics_rx_non_phy_bt {
+ struct statistics_rx_non_phy common;
+ /* additional stats for bt */
+ __le32 num_bt_kills;
+ __le32 reserved[2];
+} __packed;
+
+struct statistics_rx {
+ struct statistics_rx_phy ofdm;
+ struct statistics_rx_phy cck;
+ struct statistics_rx_non_phy general;
+ struct statistics_rx_ht_phy ofdm_ht;
+} __packed;
+
+struct statistics_rx_bt {
+ struct statistics_rx_phy ofdm;
+ struct statistics_rx_phy cck;
+ struct statistics_rx_non_phy_bt general;
+ struct statistics_rx_ht_phy ofdm_ht;
+} __packed;
+
+/**
+ * struct statistics_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct statistics_tx_power {
+ u8 ant_a;
+ u8 ant_b;
+ u8 ant_c;
+ u8 reserved;
+} __packed;
+
+struct statistics_tx_non_phy_agg {
+ __le32 ba_timeout;
+ __le32 ba_reschedule_frames;
+ __le32 scd_query_agg_frame_cnt;
+ __le32 scd_query_no_agg;
+ __le32 scd_query_agg;
+ __le32 scd_query_mismatch;
+ __le32 frame_not_ready;
+ __le32 underrun;
+ __le32 bt_prio_kill;
+ __le32 rx_ba_rsp_cnt;
+} __packed;
+
+struct statistics_tx {
+ __le32 preamble_cnt;
+ __le32 rx_detected_cnt;
+ __le32 bt_prio_defer_cnt;
+ __le32 bt_prio_kill_cnt;
+ __le32 few_bytes_cnt;
+ __le32 cts_timeout;
+ __le32 ack_timeout;
+ __le32 expected_ack_cnt;
+ __le32 actual_ack_cnt;
+ __le32 dump_msdu_cnt;
+ __le32 burst_abort_next_frame_mismatch_cnt;
+ __le32 burst_abort_missing_next_frame_cnt;
+ __le32 cts_timeout_collision;
+ __le32 ack_or_ba_timeout_collision;
+ struct statistics_tx_non_phy_agg agg;
+ /*
+ * "tx_power" are optional parameters provided by uCode,
+ * 6000 series is the only device provide the information,
+ * Those are reserved fields for all the other devices
+ */
+ struct statistics_tx_power tx_power;
+ __le32 reserved1;
+} __packed;
+
+
+struct statistics_div {
+ __le32 tx_on_a;
+ __le32 tx_on_b;
+ __le32 exec_time;
+ __le32 probe_time;
+ __le32 reserved1;
+ __le32 reserved2;
+} __packed;
+
+struct statistics_general_common {
+ __le32 temperature; /* radio temperature */
+ __le32 temperature_m; /* radio voltage */
+ struct statistics_dbg dbg;
+ __le32 sleep_time;
+ __le32 slots_out;
+ __le32 slots_idle;
+ __le32 ttl_timestamp;
+ struct statistics_div div;
+ __le32 rx_enable_counter;
+ /*
+ * num_of_sos_states:
+ * count the number of times we have to re-tune
+ * in order to get out of bad PHY status
+ */
+ __le32 num_of_sos_states;
+} __packed;
+
+struct statistics_bt_activity {
+ /* Tx statistics */
+ __le32 hi_priority_tx_req_cnt;
+ __le32 hi_priority_tx_denied_cnt;
+ __le32 lo_priority_tx_req_cnt;
+ __le32 lo_priority_tx_denied_cnt;
+ /* Rx statistics */
+ __le32 hi_priority_rx_req_cnt;
+ __le32 hi_priority_rx_denied_cnt;
+ __le32 lo_priority_rx_req_cnt;
+ __le32 lo_priority_rx_denied_cnt;
+} __packed;
+
+struct statistics_general {
+ struct statistics_general_common common;
+ __le32 reserved2;
+ __le32 reserved3;
+} __packed;
+
+struct statistics_general_bt {
+ struct statistics_general_common common;
+ struct statistics_bt_activity activity;
+ __le32 reserved2;
+ __le32 reserved3;
+} __packed;
+
+#define UCODE_STATISTICS_CLEAR_MSK (0x1 << 0)
+#define UCODE_STATISTICS_FREQUENCY_MSK (0x1 << 1)
+#define UCODE_STATISTICS_NARROW_BAND_MSK (0x1 << 2)
+
+/*
+ * REPLY_STATISTICS_CMD = 0x9c,
+ * all devices identical.
+ *
+ * This command triggers an immediate response containing uCode statistics.
+ * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below.
+ *
+ * If the CLEAR_STATS configuration flag is set, uCode will clear its
+ * internal copy of the statistics (counters) after issuing the response.
+ * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below).
+ *
+ * If the DISABLE_NOTIF configuration flag is set, uCode will not issue
+ * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag
+ * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
+ */
+#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
+#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
+struct iwl_statistics_cmd {
+ __le32 configuration_flags; /* IWL_STATS_CONF_* */
+} __packed;
+
+/*
+ * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
+ *
+ * By default, uCode issues this notification after receiving a beacon
+ * while associated. To disable this behavior, set DISABLE_NOTIF flag in the
+ * REPLY_STATISTICS_CMD 0x9c, above.
+ *
+ * Statistics counters continue to increment beacon after beacon, but are
+ * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD
+ * 0x9c with CLEAR_STATS bit set (see above).
+ *
+ * uCode also issues this notification during scans. uCode clears statistics
+ * appropriately so that each notification contains statistics for only the
+ * one channel that has just been scanned.
+ */
+#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
+#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
+
+struct iwl_notif_statistics {
+ __le32 flag;
+ struct statistics_rx rx;
+ struct statistics_tx tx;
+ struct statistics_general general;
+} __packed;
+
+struct iwl_bt_notif_statistics {
+ __le32 flag;
+ struct statistics_rx_bt rx;
+ struct statistics_tx tx;
+ struct statistics_general_bt general;
+} __packed;
+
+/*
+ * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command)
+ *
+ * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed
+ * in regardless of how many missed beacons, which mean when driver receive the
+ * notification, inside the command, it can find all the beacons information
+ * which include number of total missed beacons, number of consecutive missed
+ * beacons, number of beacons received and number of beacons expected to
+ * receive.
+ *
+ * If uCode detected consecutive_missed_beacons > 5, it will reset the radio
+ * in order to bring the radio/PHY back to working state; which has no relation
+ * to when driver will perform sensitivity calibration.
+ *
+ * Driver should set it own missed_beacon_threshold to decide when to perform
+ * sensitivity calibration based on number of consecutive missed beacons in
+ * order to improve overall performance, especially in noisy environment.
+ *
+ */
+
+#define IWL_MISSED_BEACON_THRESHOLD_MIN (1)
+#define IWL_MISSED_BEACON_THRESHOLD_DEF (5)
+#define IWL_MISSED_BEACON_THRESHOLD_MAX IWL_MISSED_BEACON_THRESHOLD_DEF
+
+struct iwl_missed_beacon_notif {
+ __le32 consecutive_missed_beacons;
+ __le32 total_missed_becons;
+ __le32 num_expected_beacons;
+ __le32 num_recvd_beacons;
+} __packed;
+
+
+/******************************************************************************
+ * (11)
+ * Rx Calibration Commands:
+ *
+ * With the uCode used for open source drivers, most Tx calibration (except
+ * for Tx Power) and most Rx calibration is done by uCode during the
+ * "initialize" phase of uCode boot. Driver must calibrate only:
+ *
+ * 1) Tx power (depends on temperature), described elsewhere
+ * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas)
+ * 3) Receiver sensitivity (to optimize signal detection)
+ *
+ *****************************************************************************/
+
+/**
+ * SENSITIVITY_CMD = 0xa8 (command, has simple generic response)
+ *
+ * This command sets up the Rx signal detector for a sensitivity level that
+ * is high enough to lock onto all signals within the associated network,
+ * but low enough to ignore signals that are below a certain threshold, so as
+ * not to have too many "false alarms". False alarms are signals that the
+ * Rx DSP tries to lock onto, but then discards after determining that they
+ * are noise.
+ *
+ * The optimum number of false alarms is between 5 and 50 per 200 TUs
+ * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e.
+ * time listening, not transmitting). Driver must adjust sensitivity so that
+ * the ratio of actual false alarms to actual Rx time falls within this range.
+ *
+ * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each
+ * received beacon. These provide information to the driver to analyze the
+ * sensitivity. Don't analyze statistics that come in from scanning, or any
+ * other non-associated-network source. Pertinent statistics include:
+ *
+ * From "general" statistics (struct statistics_rx_non_phy):
+ *
+ * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level)
+ * Measure of energy of desired signal. Used for establishing a level
+ * below which the device does not detect signals.
+ *
+ * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB)
+ * Measure of background noise in silent period after beacon.
+ *
+ * channel_load
+ * uSecs of actual Rx time during beacon period (varies according to
+ * how much time was spent transmitting).
+ *
+ * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately:
+ *
+ * false_alarm_cnt
+ * Signal locks abandoned early (before phy-level header).
+ *
+ * plcp_err
+ * Signal locks abandoned late (during phy-level header).
+ *
+ * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from
+ * beacon to beacon, i.e. each value is an accumulation of all errors
+ * before and including the latest beacon. Values will wrap around to 0
+ * after counting up to 2^32 - 1. Driver must differentiate vs.
+ * previous beacon's values to determine # false alarms in the current
+ * beacon period.
+ *
+ * Total number of false alarms = false_alarms + plcp_errs
+ *
+ * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd
+ * (notice that the start points for OFDM are at or close to settings for
+ * maximum sensitivity):
+ *
+ * START / MIN / MAX
+ * HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120
+ * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210
+ * HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140
+ * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270
+ *
+ * If actual rate of OFDM false alarms (+ plcp_errors) is too high
+ * (greater than 50 for each 204.8 msecs listening), reduce sensitivity
+ * by *adding* 1 to all 4 of the table entries above, up to the max for
+ * each entry. Conversely, if false alarm rate is too low (less than 5
+ * for each 204.8 msecs listening), *subtract* 1 from each entry to
+ * increase sensitivity.
+ *
+ * For CCK sensitivity, keep track of the following:
+ *
+ * 1). 20-beacon history of maximum background noise, indicated by
+ * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the
+ * 3 receivers. For any given beacon, the "silence reference" is
+ * the maximum of last 60 samples (20 beacons * 3 receivers).
+ *
+ * 2). 10-beacon history of strongest signal level, as indicated
+ * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers,
+ * i.e. the strength of the signal through the best receiver at the
+ * moment. These measurements are "upside down", with lower values
+ * for stronger signals, so max energy will be *minimum* value.
+ *
+ * Then for any given beacon, the driver must determine the *weakest*
+ * of the strongest signals; this is the minimum level that needs to be
+ * successfully detected, when using the best receiver at the moment.
+ * "Max cck energy" is the maximum (higher value means lower energy!)
+ * of the last 10 minima. Once this is determined, driver must add
+ * a little margin by adding "6" to it.
+ *
+ * 3). Number of consecutive beacon periods with too few false alarms.
+ * Reset this to 0 at the first beacon period that falls within the
+ * "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
+ *
+ * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd
+ * (notice that the start points for CCK are at maximum sensitivity):
+ *
+ * START / MIN / MAX
+ * HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200
+ * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400
+ * HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is too high
+ * (greater than 50 for each 204.8 msecs listening), method for reducing
+ * sensitivity is:
+ *
+ * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
+ * up to max 400.
+ *
+ * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160,
+ * sensitivity has been reduced a significant amount; bring it up to
+ * a moderate 161. Otherwise, *add* 3, up to max 200.
+ *
+ * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160,
+ * sensitivity has been reduced only a moderate or small amount;
+ * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX,
+ * down to min 0. Otherwise (if gain has been significantly reduced),
+ * don't change the HD_MIN_ENERGY_CCK_DET_INDEX value.
+ *
+ * b) Save a snapshot of the "silence reference".
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is too low
+ * (less than 5 for each 204.8 msecs listening), method for increasing
+ * sensitivity is used only if:
+ *
+ * 1a) Previous beacon did not have too many false alarms
+ * 1b) AND difference between previous "silence reference" and current
+ * "silence reference" (prev - current) is 2 or more,
+ * OR 2) 100 or more consecutive beacon periods have had rate of
+ * less than 5 false alarms per 204.8 milliseconds rx time.
+ *
+ * Method for increasing sensitivity:
+ *
+ * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX,
+ * down to min 125.
+ *
+ * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
+ * down to min 200.
+ *
+ * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100.
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is within good range
+ * (between 5 and 50 for each 204.8 msecs listening):
+ *
+ * 1) Save a snapshot of the silence reference.
+ *
+ * 2) If previous beacon had too many CCK false alarms (+ plcp_errors),
+ * give some extra margin to energy threshold by *subtracting* 8
+ * from value in HD_MIN_ENERGY_CCK_DET_INDEX.
+ *
+ * For all cases (too few, too many, good range), make sure that the CCK
+ * detection threshold (energy) is below the energy level for robust
+ * detection over the past 10 beacon periods, the "Max cck energy".
+ * Lower values mean higher energy; this means making sure that the value
+ * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
+ *
+ */
+
+/*
+ * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd)
+ */
+#define HD_TABLE_SIZE (11) /* number of entries */
+#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */
+#define HD_MIN_ENERGY_OFDM_DET_INDEX (1)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6)
+#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7)
+#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9)
+#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
+
+/*
+ * Additional table entries in enhance SENSITIVITY_CMD
+ */
+#define HD_INA_NON_SQUARE_DET_OFDM_INDEX (11)
+#define HD_INA_NON_SQUARE_DET_CCK_INDEX (12)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX (13)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX (14)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (15)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX (16)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX (17)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX (18)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (19)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_INDEX (20)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX (21)
+#define HD_RESERVED (22)
+
+/* number of entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_SIZE (23)
+
+/* number of additional entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_ENTRIES (ENHANCE_HD_TABLE_SIZE - HD_TABLE_SIZE)
+
+#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V1 cpu_to_le16(0)
+#define HD_INA_NON_SQUARE_DET_CCK_DATA_V1 cpu_to_le16(0)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1 cpu_to_le16(0)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(668)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(486)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(37)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(853)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(476)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(99)
+
+#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V2 cpu_to_le16(1)
+#define HD_INA_NON_SQUARE_DET_CCK_DATA_V2 cpu_to_le16(1)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2 cpu_to_le16(1)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(600)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(40)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(486)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(45)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(853)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(60)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(476)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(99)
+
+
+/* Control field in struct iwl_sensitivity_cmd */
+#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
+#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
+
+/**
+ * struct iwl_sensitivity_cmd
+ * @control: (1) updates working table, (0) updates default table
+ * @table: energy threshold values, use HD_* as index into table
+ *
+ * Always use "1" in "control" to update uCode's working table and DSP.
+ */
+struct iwl_sensitivity_cmd {
+ __le16 control; /* always use "1" */
+ __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */
+} __packed;
+
+/*
+ *
+ */
+struct iwl_enhance_sensitivity_cmd {
+ __le16 control; /* always use "1" */
+ __le16 enhance_table[ENHANCE_HD_TABLE_SIZE]; /* use HD_* as index */
+} __packed;
+
+
+/**
+ * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response)
+ *
+ * This command sets the relative gains of agn device's 3 radio receiver chains.
+ *
+ * After the first association, driver should accumulate signal and noise
+ * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20
+ * beacons from the associated network (don't collect statistics that come
+ * in from scanning, or any other non-network source).
+ *
+ * DISCONNECTED ANTENNA:
+ *
+ * Driver should determine which antennas are actually connected, by comparing
+ * average beacon signal levels for the 3 Rx chains. Accumulate (add) the
+ * following values over 20 beacons, one accumulator for each of the chains
+ * a/b/c, from struct statistics_rx_non_phy:
+ *
+ * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the strongest signal from among a/b/c. Compare the other two to the
+ * strongest. If any signal is more than 15 dB (times 20, unless you
+ * divide the accumulated values by 20) below the strongest, the driver
+ * considers that antenna to be disconnected, and should not try to use that
+ * antenna/chain for Rx or Tx. If both A and B seem to be disconnected,
+ * driver should declare the stronger one as connected, and attempt to use it
+ * (A and B are the only 2 Tx chains!).
+ *
+ *
+ * RX BALANCE:
+ *
+ * Driver should balance the 3 receivers (but just the ones that are connected
+ * to antennas, see above) for gain, by comparing the average signal levels
+ * detected during the silence after each beacon (background noise).
+ * Accumulate (add) the following values over 20 beacons, one accumulator for
+ * each of the chains a/b/c, from struct statistics_rx_non_phy:
+ *
+ * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the weakest background noise level from among a/b/c. This Rx chain
+ * will be the reference, with 0 gain adjustment. Attenuate other channels by
+ * finding noise difference:
+ *
+ * (accum_noise[i] - accum_noise[reference]) / 30
+ *
+ * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
+ * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the
+ * driver should limit the difference results to a range of 0-3 (0-4.5 dB),
+ * and set bit 2 to indicate "reduce gain". The value for the reference
+ * (weakest) chain should be "0".
+ *
+ * diff_gain_[abc] bit fields:
+ * 2: (1) reduce gain, (0) increase gain
+ * 1-0: amount of gain, units of 1.5 dB
+ */
+
+/* Phy calibration command for series */
+enum {
+ IWL_PHY_CALIBRATE_DC_CMD = 8,
+ IWL_PHY_CALIBRATE_LO_CMD = 9,
+ IWL_PHY_CALIBRATE_TX_IQ_CMD = 11,
+ IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15,
+ IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16,
+ IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17,
+ IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD = 18,
+};
+
+/* This enum defines the bitmap of various calibrations to enable in both
+ * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
+ */
+enum iwl_ucode_calib_cfg {
+ IWL_CALIB_CFG_RX_BB_IDX = BIT(0),
+ IWL_CALIB_CFG_DC_IDX = BIT(1),
+ IWL_CALIB_CFG_LO_IDX = BIT(2),
+ IWL_CALIB_CFG_TX_IQ_IDX = BIT(3),
+ IWL_CALIB_CFG_RX_IQ_IDX = BIT(4),
+ IWL_CALIB_CFG_NOISE_IDX = BIT(5),
+ IWL_CALIB_CFG_CRYSTAL_IDX = BIT(6),
+ IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(7),
+ IWL_CALIB_CFG_PAPD_IDX = BIT(8),
+ IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(9),
+ IWL_CALIB_CFG_TX_PWR_IDX = BIT(10),
+};
+
+#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \
+ IWL_CALIB_CFG_DC_IDX | \
+ IWL_CALIB_CFG_LO_IDX | \
+ IWL_CALIB_CFG_TX_IQ_IDX | \
+ IWL_CALIB_CFG_RX_IQ_IDX | \
+ IWL_CALIB_CFG_CRYSTAL_IDX)
+
+#define IWL_CALIB_RT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \
+ IWL_CALIB_CFG_DC_IDX | \
+ IWL_CALIB_CFG_LO_IDX | \
+ IWL_CALIB_CFG_TX_IQ_IDX | \
+ IWL_CALIB_CFG_RX_IQ_IDX | \
+ IWL_CALIB_CFG_TEMPERATURE_IDX | \
+ IWL_CALIB_CFG_PAPD_IDX | \
+ IWL_CALIB_CFG_TX_PWR_IDX | \
+ IWL_CALIB_CFG_CRYSTAL_IDX)
+
+#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK cpu_to_le32(BIT(0))
+
+struct iwl_calib_cfg_elmnt_s {
+ __le32 is_enable;
+ __le32 start;
+ __le32 send_res;
+ __le32 apply_res;
+ __le32 reserved;
+} __packed;
+
+struct iwl_calib_cfg_status_s {
+ struct iwl_calib_cfg_elmnt_s once;
+ struct iwl_calib_cfg_elmnt_s perd;
+ __le32 flags;
+} __packed;
+
+struct iwl_calib_cfg_cmd {
+ struct iwl_calib_cfg_status_s ucd_calib_cfg;
+ struct iwl_calib_cfg_status_s drv_calib_cfg;
+ __le32 reserved1;
+} __packed;
+
+struct iwl_calib_hdr {
+ u8 op_code;
+ u8 first_group;
+ u8 groups_num;
+ u8 data_valid;
+} __packed;
+
+struct iwl_calib_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 data[0];
+} __packed;
+
+struct iwl_calib_xtal_freq_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 cap_pin1;
+ u8 cap_pin2;
+ u8 pad[2];
+} __packed;
+
+#define DEFAULT_RADIO_SENSOR_OFFSET cpu_to_le16(2700)
+struct iwl_calib_temperature_offset_cmd {
+ struct iwl_calib_hdr hdr;
+ __le16 radio_sensor_offset;
+ __le16 reserved;
+} __packed;
+
+struct iwl_calib_temperature_offset_v2_cmd {
+ struct iwl_calib_hdr hdr;
+ __le16 radio_sensor_offset_high;
+ __le16 radio_sensor_offset_low;
+ __le16 burntVoltageRef;
+ __le16 reserved;
+} __packed;
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
+struct iwl_calib_chain_noise_reset_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 data[0];
+};
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
+struct iwl_calib_chain_noise_gain_cmd {
+ struct iwl_calib_hdr hdr;
+ u8 delta_gain_1;
+ u8 delta_gain_2;
+ u8 pad[2];
+} __packed;
+
+/******************************************************************************
+ * (12)
+ * Miscellaneous Commands:
+ *
+ *****************************************************************************/
+
+/*
+ * LEDs Command & Response
+ * REPLY_LEDS_CMD = 0x48 (command, has simple generic response)
+ *
+ * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
+ * this command turns it on or off, or sets up a periodic blinking cycle.
+ */
+struct iwl_led_cmd {
+ __le32 interval; /* "interval" in uSec */
+ u8 id; /* 1: Activity, 2: Link, 3: Tech */
+ u8 off; /* # intervals off while blinking;
+ * "0", with >0 "on" value, turns LED on */
+ u8 on; /* # intervals on while blinking;
+ * "0", regardless of "off", turns LED off */
+ u8 reserved;
+} __packed;
+
+/*
+ * station priority table entries
+ * also used as potential "events" value for both
+ * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD
+ */
+
+/*
+ * COEX events entry flag masks
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ */
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG (0x1)
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG (0x2)
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG (0x4)
+
+#define COEX_CU_UNASSOC_IDLE_RP 4
+#define COEX_CU_UNASSOC_MANUAL_SCAN_RP 4
+#define COEX_CU_UNASSOC_AUTO_SCAN_RP 4
+#define COEX_CU_CALIBRATION_RP 4
+#define COEX_CU_PERIODIC_CALIBRATION_RP 4
+#define COEX_CU_CONNECTION_ESTAB_RP 4
+#define COEX_CU_ASSOCIATED_IDLE_RP 4
+#define COEX_CU_ASSOC_MANUAL_SCAN_RP 4
+#define COEX_CU_ASSOC_AUTO_SCAN_RP 4
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP 4
+#define COEX_CU_RF_ON_RP 6
+#define COEX_CU_RF_OFF_RP 4
+#define COEX_CU_STAND_ALONE_DEBUG_RP 6
+#define COEX_CU_IPAN_ASSOC_LEVEL_RP 4
+#define COEX_CU_RSRVD1_RP 4
+#define COEX_CU_RSRVD2_RP 4
+
+#define COEX_CU_UNASSOC_IDLE_WP 3
+#define COEX_CU_UNASSOC_MANUAL_SCAN_WP 3
+#define COEX_CU_UNASSOC_AUTO_SCAN_WP 3
+#define COEX_CU_CALIBRATION_WP 3
+#define COEX_CU_PERIODIC_CALIBRATION_WP 3
+#define COEX_CU_CONNECTION_ESTAB_WP 3
+#define COEX_CU_ASSOCIATED_IDLE_WP 3
+#define COEX_CU_ASSOC_MANUAL_SCAN_WP 3
+#define COEX_CU_ASSOC_AUTO_SCAN_WP 3
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP 3
+#define COEX_CU_RF_ON_WP 3
+#define COEX_CU_RF_OFF_WP 3
+#define COEX_CU_STAND_ALONE_DEBUG_WP 6
+#define COEX_CU_IPAN_ASSOC_LEVEL_WP 3
+#define COEX_CU_RSRVD1_WP 3
+#define COEX_CU_RSRVD2_WP 3
+
+#define COEX_UNASSOC_IDLE_FLAGS 0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_CALIBRATION_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_PERIODIC_CALIBRATION_FLAGS 0
+/*
+ * COEX_CONNECTION_ESTAB:
+ * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CONNECTION_ESTAB_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_ASSOCIATED_IDLE_FLAGS 0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS 0
+#define COEX_RF_ON_FLAGS 0
+#define COEX_RF_OFF_FLAGS 0
+#define COEX_STAND_ALONE_DEBUG_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_RSRVD1_FLAGS 0
+#define COEX_RSRVD2_FLAGS 0
+/*
+ * COEX_CU_RF_ON is the event wrapping all radio ownership.
+ * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CU_RF_ON_FLAGS \
+ (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \
+ COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \
+ COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+
+
+enum {
+ /* un-association part */
+ COEX_UNASSOC_IDLE = 0,
+ COEX_UNASSOC_MANUAL_SCAN = 1,
+ COEX_UNASSOC_AUTO_SCAN = 2,
+ /* calibration */
+ COEX_CALIBRATION = 3,
+ COEX_PERIODIC_CALIBRATION = 4,
+ /* connection */
+ COEX_CONNECTION_ESTAB = 5,
+ /* association part */
+ COEX_ASSOCIATED_IDLE = 6,
+ COEX_ASSOC_MANUAL_SCAN = 7,
+ COEX_ASSOC_AUTO_SCAN = 8,
+ COEX_ASSOC_ACTIVE_LEVEL = 9,
+ /* RF ON/OFF */
+ COEX_RF_ON = 10,
+ COEX_RF_OFF = 11,
+ COEX_STAND_ALONE_DEBUG = 12,
+ /* IPAN */
+ COEX_IPAN_ASSOC_LEVEL = 13,
+ /* reserved */
+ COEX_RSRVD1 = 14,
+ COEX_RSRVD2 = 15,
+ COEX_NUM_OF_EVENTS = 16
+};
+
+/*
+ * Coexistence WIFI/WIMAX Command
+ * COEX_PRIORITY_TABLE_CMD = 0x5a
+ *
+ */
+struct iwl_wimax_coex_event_entry {
+ u8 request_prio;
+ u8 win_medium_prio;
+ u8 reserved;
+ u8 flags;
+} __packed;
+
+/* COEX flag masks */
+
+/* Station table is valid */
+#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1)
+/* UnMask wake up src at unassociated sleep */
+#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4)
+/* UnMask wake up src at associated sleep */
+#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8)
+/* Enable CoEx feature. */
+#define COEX_FLAGS_COEX_ENABLE_MSK (0x80)
+
+struct iwl_wimax_coex_cmd {
+ u8 flags;
+ u8 reserved[3];
+ struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS];
+} __packed;
+
+/*
+ * Coexistence MEDIUM NOTIFICATION
+ * COEX_MEDIUM_NOTIFICATION = 0x5b
+ *
+ * notification from uCode to host to indicate medium changes
+ *
+ */
+/*
+ * status field
+ * bit 0 - 2: medium status
+ * bit 3: medium change indication
+ * bit 4 - 31: reserved
+ */
+/* status option values, (0 - 2 bits) */
+#define COEX_MEDIUM_BUSY (0x0) /* radio belongs to WiMAX */
+#define COEX_MEDIUM_ACTIVE (0x1) /* radio belongs to WiFi */
+#define COEX_MEDIUM_PRE_RELEASE (0x2) /* received radio release */
+#define COEX_MEDIUM_MSK (0x7)
+
+/* send notification status (1 bit) */
+#define COEX_MEDIUM_CHANGED (0x8)
+#define COEX_MEDIUM_CHANGED_MSK (0x8)
+#define COEX_MEDIUM_SHIFT (3)
+
+struct iwl_coex_medium_notification {
+ __le32 status;
+ __le32 events;
+} __packed;
+
+/*
+ * Coexistence EVENT Command
+ * COEX_EVENT_CMD = 0x5c
+ *
+ * send from host to uCode for coex event request.
+ */
+/* flags options */
+#define COEX_EVENT_REQUEST_MSK (0x1)
+
+struct iwl_coex_event_cmd {
+ u8 flags;
+ u8 event;
+ __le16 reserved;
+} __packed;
+
+struct iwl_coex_event_resp {
+ __le32 status;
+} __packed;
+
+
+/******************************************************************************
+ * Bluetooth Coexistence commands
+ *
+ *****************************************************************************/
+
+/*
+ * BT Status notification
+ * REPLY_BT_COEX_PROFILE_NOTIF = 0xce
+ */
+enum iwl_bt_coex_profile_traffic_load {
+ IWL_BT_COEX_TRAFFIC_LOAD_NONE = 0,
+ IWL_BT_COEX_TRAFFIC_LOAD_LOW = 1,
+ IWL_BT_COEX_TRAFFIC_LOAD_HIGH = 2,
+ IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS = 3,
+/*
+ * There are no more even though below is a u8, the
+ * indication from the BT device only has two bits.
+ */
+};
+
+#define BT_SESSION_ACTIVITY_1_UART_MSG 0x1
+#define BT_SESSION_ACTIVITY_2_UART_MSG 0x2
+
+/* BT UART message - Share Part (BT -> WiFi) */
+#define BT_UART_MSG_FRAME1MSGTYPE_POS (0)
+#define BT_UART_MSG_FRAME1MSGTYPE_MSK \
+ (0x7 << BT_UART_MSG_FRAME1MSGTYPE_POS)
+#define BT_UART_MSG_FRAME1SSN_POS (3)
+#define BT_UART_MSG_FRAME1SSN_MSK \
+ (0x3 << BT_UART_MSG_FRAME1SSN_POS)
+#define BT_UART_MSG_FRAME1UPDATEREQ_POS (5)
+#define BT_UART_MSG_FRAME1UPDATEREQ_MSK \
+ (0x1 << BT_UART_MSG_FRAME1UPDATEREQ_POS)
+#define BT_UART_MSG_FRAME1RESERVED_POS (6)
+#define BT_UART_MSG_FRAME1RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME1RESERVED_POS)
+
+#define BT_UART_MSG_FRAME2OPENCONNECTIONS_POS (0)
+#define BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK \
+ (0x3 << BT_UART_MSG_FRAME2OPENCONNECTIONS_POS)
+#define BT_UART_MSG_FRAME2TRAFFICLOAD_POS (2)
+#define BT_UART_MSG_FRAME2TRAFFICLOAD_MSK \
+ (0x3 << BT_UART_MSG_FRAME2TRAFFICLOAD_POS)
+#define BT_UART_MSG_FRAME2CHLSEQN_POS (4)
+#define BT_UART_MSG_FRAME2CHLSEQN_MSK \
+ (0x1 << BT_UART_MSG_FRAME2CHLSEQN_POS)
+#define BT_UART_MSG_FRAME2INBAND_POS (5)
+#define BT_UART_MSG_FRAME2INBAND_MSK \
+ (0x1 << BT_UART_MSG_FRAME2INBAND_POS)
+#define BT_UART_MSG_FRAME2RESERVED_POS (6)
+#define BT_UART_MSG_FRAME2RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME2RESERVED_POS)
+
+#define BT_UART_MSG_FRAME3SCOESCO_POS (0)
+#define BT_UART_MSG_FRAME3SCOESCO_MSK \
+ (0x1 << BT_UART_MSG_FRAME3SCOESCO_POS)
+#define BT_UART_MSG_FRAME3SNIFF_POS (1)
+#define BT_UART_MSG_FRAME3SNIFF_MSK \
+ (0x1 << BT_UART_MSG_FRAME3SNIFF_POS)
+#define BT_UART_MSG_FRAME3A2DP_POS (2)
+#define BT_UART_MSG_FRAME3A2DP_MSK \
+ (0x1 << BT_UART_MSG_FRAME3A2DP_POS)
+#define BT_UART_MSG_FRAME3ACL_POS (3)
+#define BT_UART_MSG_FRAME3ACL_MSK \
+ (0x1 << BT_UART_MSG_FRAME3ACL_POS)
+#define BT_UART_MSG_FRAME3MASTER_POS (4)
+#define BT_UART_MSG_FRAME3MASTER_MSK \
+ (0x1 << BT_UART_MSG_FRAME3MASTER_POS)
+#define BT_UART_MSG_FRAME3OBEX_POS (5)
+#define BT_UART_MSG_FRAME3OBEX_MSK \
+ (0x1 << BT_UART_MSG_FRAME3OBEX_POS)
+#define BT_UART_MSG_FRAME3RESERVED_POS (6)
+#define BT_UART_MSG_FRAME3RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME3RESERVED_POS)
+
+#define BT_UART_MSG_FRAME4IDLEDURATION_POS (0)
+#define BT_UART_MSG_FRAME4IDLEDURATION_MSK \
+ (0x3F << BT_UART_MSG_FRAME4IDLEDURATION_POS)
+#define BT_UART_MSG_FRAME4RESERVED_POS (6)
+#define BT_UART_MSG_FRAME4RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME4RESERVED_POS)
+
+#define BT_UART_MSG_FRAME5TXACTIVITY_POS (0)
+#define BT_UART_MSG_FRAME5TXACTIVITY_MSK \
+ (0x3 << BT_UART_MSG_FRAME5TXACTIVITY_POS)
+#define BT_UART_MSG_FRAME5RXACTIVITY_POS (2)
+#define BT_UART_MSG_FRAME5RXACTIVITY_MSK \
+ (0x3 << BT_UART_MSG_FRAME5RXACTIVITY_POS)
+#define BT_UART_MSG_FRAME5ESCORETRANSMIT_POS (4)
+#define BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK \
+ (0x3 << BT_UART_MSG_FRAME5ESCORETRANSMIT_POS)
+#define BT_UART_MSG_FRAME5RESERVED_POS (6)
+#define BT_UART_MSG_FRAME5RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME5RESERVED_POS)
+
+#define BT_UART_MSG_FRAME6SNIFFINTERVAL_POS (0)
+#define BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK \
+ (0x1F << BT_UART_MSG_FRAME6SNIFFINTERVAL_POS)
+#define BT_UART_MSG_FRAME6DISCOVERABLE_POS (5)
+#define BT_UART_MSG_FRAME6DISCOVERABLE_MSK \
+ (0x1 << BT_UART_MSG_FRAME6DISCOVERABLE_POS)
+#define BT_UART_MSG_FRAME6RESERVED_POS (6)
+#define BT_UART_MSG_FRAME6RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME6RESERVED_POS)
+
+#define BT_UART_MSG_FRAME7SNIFFACTIVITY_POS (0)
+#define BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK \
+ (0x7 << BT_UART_MSG_FRAME7SNIFFACTIVITY_POS)
+#define BT_UART_MSG_FRAME7PAGE_POS (3)
+#define BT_UART_MSG_FRAME7PAGE_MSK \
+ (0x1 << BT_UART_MSG_FRAME7PAGE_POS)
+#define BT_UART_MSG_FRAME7INQUIRY_POS (4)
+#define BT_UART_MSG_FRAME7INQUIRY_MSK \
+ (0x1 << BT_UART_MSG_FRAME7INQUIRY_POS)
+#define BT_UART_MSG_FRAME7CONNECTABLE_POS (5)
+#define BT_UART_MSG_FRAME7CONNECTABLE_MSK \
+ (0x1 << BT_UART_MSG_FRAME7CONNECTABLE_POS)
+#define BT_UART_MSG_FRAME7RESERVED_POS (6)
+#define BT_UART_MSG_FRAME7RESERVED_MSK \
+ (0x3 << BT_UART_MSG_FRAME7RESERVED_POS)
+
+/* BT Session Activity 2 UART message (BT -> WiFi) */
+#define BT_UART_MSG_2_FRAME1RESERVED1_POS (5)
+#define BT_UART_MSG_2_FRAME1RESERVED1_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME1RESERVED1_POS)
+#define BT_UART_MSG_2_FRAME1RESERVED2_POS (6)
+#define BT_UART_MSG_2_FRAME1RESERVED2_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME1RESERVED2_POS)
+
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS (0)
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_MSK \
+ (0x3F<<BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS)
+#define BT_UART_MSG_2_FRAME2RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME2RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME2RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS (0)
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_MSK \
+ (0xF<<BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS (4)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS)
+#define BT_UART_MSG_2_FRAME3LEMASTER_POS (5)
+#define BT_UART_MSG_2_FRAME3LEMASTER_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME3LEMASTER_POS)
+#define BT_UART_MSG_2_FRAME3RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME3RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME3RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS (0)
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_MSK \
+ (0xF<<BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_POS (4)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME4NUMLECONN_POS)
+#define BT_UART_MSG_2_FRAME4RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME4RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME4RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_POS (0)
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_MSK \
+ (0xF<<BT_UART_MSG_2_FRAME5BTMINRSSI_POS)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_POS (4)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME5LESCANINITMODE_POS)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_POS (5)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME5LEADVERMODE_POS)
+#define BT_UART_MSG_2_FRAME5RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME5RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME5RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS (0)
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_MSK \
+ (0x1F<<BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS)
+#define BT_UART_MSG_2_FRAME6RFU_POS (5)
+#define BT_UART_MSG_2_FRAME6RFU_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME6RFU_POS)
+#define BT_UART_MSG_2_FRAME6RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME6RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME6RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS (0)
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_MSK \
+ (0x7<<BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_POS (3)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE1_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_POS (4)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE2_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS (5)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_MSK \
+ (0x1<<BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS)
+#define BT_UART_MSG_2_FRAME7RESERVED_POS (6)
+#define BT_UART_MSG_2_FRAME7RESERVED_MSK \
+ (0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS)
+
+
+#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD (-62)
+#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD (-65)
+
+struct iwl_bt_uart_msg {
+ u8 header;
+ u8 frame1;
+ u8 frame2;
+ u8 frame3;
+ u8 frame4;
+ u8 frame5;
+ u8 frame6;
+ u8 frame7;
+} __packed;
+
+struct iwl_bt_coex_profile_notif {
+ struct iwl_bt_uart_msg last_bt_uart_msg;
+ u8 bt_status; /* 0 - off, 1 - on */
+ u8 bt_traffic_load; /* 0 .. 3? */
+ u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */
+ u8 reserved;
+} __packed;
+
+#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS 0
+#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK 0x1
+#define IWL_BT_COEX_PRIO_TBL_PRIO_POS 1
+#define IWL_BT_COEX_PRIO_TBL_PRIO_MASK 0x0e
+#define IWL_BT_COEX_PRIO_TBL_RESERVED_POS 4
+#define IWL_BT_COEX_PRIO_TBL_RESERVED_MASK 0xf0
+#define IWL_BT_COEX_PRIO_TBL_PRIO_SHIFT 1
+
+/*
+ * BT Coexistence Priority table
+ * REPLY_BT_COEX_PRIO_TABLE = 0xcc
+ */
+enum bt_coex_prio_table_events {
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB1 = 0,
+ BT_COEX_PRIO_TBL_EVT_INIT_CALIB2 = 1,
+ BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1 = 2,
+ BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2 = 3, /* DC calib */
+ BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1 = 4,
+ BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2 = 5,
+ BT_COEX_PRIO_TBL_EVT_DTIM = 6,
+ BT_COEX_PRIO_TBL_EVT_SCAN52 = 7,
+ BT_COEX_PRIO_TBL_EVT_SCAN24 = 8,
+ BT_COEX_PRIO_TBL_EVT_RESERVED0 = 9,
+ BT_COEX_PRIO_TBL_EVT_RESERVED1 = 10,
+ BT_COEX_PRIO_TBL_EVT_RESERVED2 = 11,
+ BT_COEX_PRIO_TBL_EVT_RESERVED3 = 12,
+ BT_COEX_PRIO_TBL_EVT_RESERVED4 = 13,
+ BT_COEX_PRIO_TBL_EVT_RESERVED5 = 14,
+ BT_COEX_PRIO_TBL_EVT_RESERVED6 = 15,
+ /* BT_COEX_PRIO_TBL_EVT_MAX should always be last */
+ BT_COEX_PRIO_TBL_EVT_MAX,
+};
+
+enum bt_coex_prio_table_priorities {
+ BT_COEX_PRIO_TBL_DISABLED = 0,
+ BT_COEX_PRIO_TBL_PRIO_LOW = 1,
+ BT_COEX_PRIO_TBL_PRIO_HIGH = 2,
+ BT_COEX_PRIO_TBL_PRIO_BYPASS = 3,
+ BT_COEX_PRIO_TBL_PRIO_COEX_OFF = 4,
+ BT_COEX_PRIO_TBL_PRIO_COEX_ON = 5,
+ BT_COEX_PRIO_TBL_PRIO_RSRVD1 = 6,
+ BT_COEX_PRIO_TBL_PRIO_RSRVD2 = 7,
+ BT_COEX_PRIO_TBL_MAX,
+};
+
+struct iwl_bt_coex_prio_table_cmd {
+ u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX];
+} __packed;
+
+#define IWL_BT_COEX_ENV_CLOSE 0
+#define IWL_BT_COEX_ENV_OPEN 1
+/*
+ * BT Protection Envelope
+ * REPLY_BT_COEX_PROT_ENV = 0xcd
+ */
+struct iwl_bt_coex_prot_env_cmd {
+ u8 action; /* 0 = closed, 1 = open */
+ u8 type; /* 0 .. 15 */
+ u8 reserved[2];
+} __packed;
+
+/*
+ * REPLY_D3_CONFIG
+ */
+enum iwlagn_d3_wakeup_filters {
+ IWLAGN_D3_WAKEUP_RFKILL = BIT(0),
+ IWLAGN_D3_WAKEUP_SYSASSERT = BIT(1),
+};
+
+struct iwlagn_d3_config_cmd {
+ __le32 min_sleep_time;
+ __le32 wakeup_flags;
+} __packed;
+
+/*
+ * REPLY_WOWLAN_PATTERNS
+ */
+#define IWLAGN_WOWLAN_MIN_PATTERN_LEN 16
+#define IWLAGN_WOWLAN_MAX_PATTERN_LEN 128
+
+struct iwlagn_wowlan_pattern {
+ u8 mask[IWLAGN_WOWLAN_MAX_PATTERN_LEN / 8];
+ u8 pattern[IWLAGN_WOWLAN_MAX_PATTERN_LEN];
+ u8 mask_size;
+ u8 pattern_size;
+ __le16 reserved;
+} __packed;
+
+#define IWLAGN_WOWLAN_MAX_PATTERNS 20
+
+struct iwlagn_wowlan_patterns_cmd {
+ __le32 n_patterns;
+ struct iwlagn_wowlan_pattern patterns[];
+} __packed;
+
+/*
+ * REPLY_WOWLAN_WAKEUP_FILTER
+ */
+enum iwlagn_wowlan_wakeup_filters {
+ IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET = BIT(0),
+ IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH = BIT(1),
+ IWLAGN_WOWLAN_WAKEUP_BEACON_MISS = BIT(2),
+ IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE = BIT(3),
+ IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL = BIT(4),
+ IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ = BIT(5),
+ IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE = BIT(6),
+ IWLAGN_WOWLAN_WAKEUP_ALWAYS = BIT(7),
+ IWLAGN_WOWLAN_WAKEUP_ENABLE_NET_DETECT = BIT(8),
+};
+
+struct iwlagn_wowlan_wakeup_filter_cmd {
+ __le32 enabled;
+ __le16 non_qos_seq;
+ __le16 reserved;
+ __le16 qos_seq[8];
+};
+
+/*
+ * REPLY_WOWLAN_TSC_RSC_PARAMS
+ */
+#define IWLAGN_NUM_RSC 16
+
+struct tkip_sc {
+ __le16 iv16;
+ __le16 pad;
+ __le32 iv32;
+} __packed;
+
+struct iwlagn_tkip_rsc_tsc {
+ struct tkip_sc unicast_rsc[IWLAGN_NUM_RSC];
+ struct tkip_sc multicast_rsc[IWLAGN_NUM_RSC];
+ struct tkip_sc tsc;
+} __packed;
+
+struct aes_sc {
+ __le64 pn;
+} __packed;
+
+struct iwlagn_aes_rsc_tsc {
+ struct aes_sc unicast_rsc[IWLAGN_NUM_RSC];
+ struct aes_sc multicast_rsc[IWLAGN_NUM_RSC];
+ struct aes_sc tsc;
+} __packed;
+
+union iwlagn_all_tsc_rsc {
+ struct iwlagn_tkip_rsc_tsc tkip;
+ struct iwlagn_aes_rsc_tsc aes;
+};
+
+struct iwlagn_wowlan_rsc_tsc_params_cmd {
+ union iwlagn_all_tsc_rsc all_tsc_rsc;
+} __packed;
+
+/*
+ * REPLY_WOWLAN_TKIP_PARAMS
+ */
+#define IWLAGN_MIC_KEY_SIZE 8
+#define IWLAGN_P1K_SIZE 5
+struct iwlagn_mic_keys {
+ u8 tx[IWLAGN_MIC_KEY_SIZE];
+ u8 rx_unicast[IWLAGN_MIC_KEY_SIZE];
+ u8 rx_mcast[IWLAGN_MIC_KEY_SIZE];
+} __packed;
+
+struct iwlagn_p1k_cache {
+ __le16 p1k[IWLAGN_P1K_SIZE];
+} __packed;
+
+#define IWLAGN_NUM_RX_P1K_CACHE 2
+
+struct iwlagn_wowlan_tkip_params_cmd {
+ struct iwlagn_mic_keys mic_keys;
+ struct iwlagn_p1k_cache tx;
+ struct iwlagn_p1k_cache rx_uni[IWLAGN_NUM_RX_P1K_CACHE];
+ struct iwlagn_p1k_cache rx_multi[IWLAGN_NUM_RX_P1K_CACHE];
+} __packed;
+
+/*
+ * REPLY_WOWLAN_KEK_KCK_MATERIAL
+ */
+
+#define IWLAGN_KCK_MAX_SIZE 32
+#define IWLAGN_KEK_MAX_SIZE 32
+
+struct iwlagn_wowlan_kek_kck_material_cmd {
+ u8 kck[IWLAGN_KCK_MAX_SIZE];
+ u8 kek[IWLAGN_KEK_MAX_SIZE];
+ __le16 kck_len;
+ __le16 kek_len;
+ __le64 replay_ctr;
+} __packed;
+
+#define RF_KILL_INDICATOR_FOR_WOWLAN 0x87
+
+/*
+ * REPLY_WOWLAN_GET_STATUS = 0xe5
+ */
+struct iwlagn_wowlan_status {
+ __le64 replay_ctr;
+ __le32 rekey_status;
+ __le32 wakeup_reason;
+ u8 pattern_number;
+ u8 reserved1;
+ __le16 qos_seq_ctr[8];
+ __le16 non_qos_seq_ctr;
+ __le16 reserved2;
+ union iwlagn_all_tsc_rsc tsc_rsc;
+ __le16 reserved3;
+} __packed;
+
+/*
+ * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification)
+ */
+
+/*
+ * Minimum slot time in TU
+ */
+#define IWL_MIN_SLOT_TIME 20
+
+/**
+ * struct iwl_wipan_slot
+ * @width: Time in TU
+ * @type:
+ * 0 - BSS
+ * 1 - PAN
+ */
+struct iwl_wipan_slot {
+ __le16 width;
+ u8 type;
+ u8 reserved;
+} __packed;
+
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_CTS BIT(1) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_QUIET BIT(2) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE BIT(3) /* reserved */
+#define IWL_WIPAN_PARAMS_FLG_FILTER_BEACON_NOTIF BIT(4)
+#define IWL_WIPAN_PARAMS_FLG_FULL_SLOTTED_MODE BIT(5)
+
+/**
+ * struct iwl_wipan_params_cmd
+ * @flags:
+ * bit0: reserved
+ * bit1: CP leave channel with CTS
+ * bit2: CP leave channel qith Quiet
+ * bit3: slotted mode
+ * 1 - work in slotted mode
+ * 0 - work in non slotted mode
+ * bit4: filter beacon notification
+ * bit5: full tx slotted mode. if this flag is set,
+ * uCode will perform leaving channel methods in context switch
+ * also when working in same channel mode
+ * @num_slots: 1 - 10
+ */
+struct iwl_wipan_params_cmd {
+ __le16 flags;
+ u8 reserved;
+ u8 num_slots;
+ struct iwl_wipan_slot slots[10];
+} __packed;
+
+/*
+ * REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9
+ *
+ * TODO: Figure out what this is used for,
+ * it can only switch between 2.4 GHz
+ * channels!!
+ */
+
+struct iwl_wipan_p2p_channel_switch_cmd {
+ __le16 channel;
+ __le16 reserved;
+};
+
+/*
+ * REPLY_WIPAN_NOA_NOTIFICATION = 0xbc
+ *
+ * This is used by the device to notify us of the
+ * NoA schedule it determined so we can forward it
+ * to userspace for inclusion in probe responses.
+ *
+ * In beacons, the NoA schedule is simply appended
+ * to the frame we give the device.
+ */
+
+struct iwl_wipan_noa_descriptor {
+ u8 count;
+ __le32 duration;
+ __le32 interval;
+ __le32 starttime;
+} __packed;
+
+struct iwl_wipan_noa_attribute {
+ u8 id;
+ __le16 length;
+ u8 index;
+ u8 ct_window;
+ struct iwl_wipan_noa_descriptor descr0, descr1;
+ u8 reserved;
+} __packed;
+
+struct iwl_wipan_noa_notification {
+ u32 noa_active;
+ struct iwl_wipan_noa_attribute noa_attribute;
+} __packed;
+
+#endif /* __iwl_commands_h__ */