diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.h | 136 |
1 files changed, 80 insertions, 56 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index f0302bfe85f5..6228b1c2ec96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -137,7 +137,6 @@ struct iwl_debugfs_ops { struct iwl_temp_ops { void (*temperature)(struct iwl_priv *priv); void (*set_ct_kill)(struct iwl_priv *priv); - void (*set_calib_version)(struct iwl_priv *priv); }; struct iwl_tt_ops { @@ -233,11 +232,17 @@ struct iwl_led_ops { int (*off)(struct iwl_priv *priv); }; +/* NIC specific ops */ +struct iwl_nic_ops { + void (*additional_nic_config)(struct iwl_priv *priv); +}; + struct iwl_ops { const struct iwl_lib_ops *lib; const struct iwl_hcmd_ops *hcmd; const struct iwl_hcmd_utils_ops *utils; const struct iwl_led_ops *led; + const struct iwl_nic_ops *nic; }; struct iwl_mod_params { @@ -250,20 +255,12 @@ struct iwl_mod_params { int restart_fw; /* def: 1 = restart firmware */ }; -/** - * struct iwl_cfg - * @fw_name_pre: Firmware filename prefix. The api version and extension - * (.ucode) will be added to filename before loading from disk. The - * filename is constructed as fw_name_pre<api>.ucode. - * @ucode_api_max: Highest version of uCode API supported by driver. - * @ucode_api_min: Lowest version of uCode API supported by driver. - * @pa_type: used by 6000 series only to identify the type of Power Amplifier +/* * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory * @led_compensation: compensate on the led on/off time per HW according * to the deviation to achieve the desired led frequency. * The detail algorithm is described in iwl-led.c - * @use_rts_for_aggregation: use rts/cts protection for HT traffic * @chain_noise_num_beacons: number of beacons used to compute chain noise * @adv_thermal_throttle: support advance thermal throttle * @support_ct_kill_exit: support ct kill exit condition @@ -281,15 +278,73 @@ struct iwl_mod_params { * sensitivity calibration operation * @chain_noise_calib_by_driver: driver has the capability to perform * chain noise calibration operation - * @scan_antennas: available antenna for scan operation +*/ +struct iwl_base_params { + int eeprom_size; + int num_of_queues; /* def: HW dependent */ + int num_of_ampdu_queues;/* def: HW dependent */ + /* for iwl_apm_init() */ + u32 pll_cfg_val; + bool set_l0s; + bool use_bsm; + + bool use_isr_legacy; + const u16 max_ll_items; + const bool shadow_ram_support; + u16 led_compensation; + const bool broken_powersave; + int chain_noise_num_beacons; + const bool supports_idle; + bool adv_thermal_throttle; + bool support_ct_kill_exit; + const bool support_wimax_coexist; + u8 plcp_delta_threshold; + s32 chain_noise_scale; + /* timer period for monitor the driver queues */ + u32 monitor_recover_period; + bool temperature_kelvin; + u32 max_event_log_size; + const bool tx_power_by_driver; + const bool ucode_tracing; + const bool sensitivity_calib_by_driver; + const bool chain_noise_calib_by_driver; +}; +/* * @advanced_bt_coexist: support advanced bt coexist * @bt_init_traffic_load: specify initial bt traffic load * @bt_prio_boost: default bt priority boost value - * @need_dc_calib: need to perform init dc calibration * @bt_statistics: use BT version of statistics notification * @agg_time_limit: maximum number of uSec in aggregation * @ampdu_factor: Maximum A-MPDU length factor * @ampdu_density: Minimum A-MPDU spacing +*/ +struct iwl_bt_params { + bool advanced_bt_coexist; + u8 bt_init_traffic_load; + u8 bt_prio_boost; + const bool bt_statistics; + u16 agg_time_limit; + u8 ampdu_factor; + u8 ampdu_density; +}; +/* + * @use_rts_for_aggregation: use rts/cts protection for HT traffic +*/ +struct iwl_ht_params { + const bool ht_greenfield_support; /* if used set to true */ + bool use_rts_for_aggregation; +}; + +/** + * struct iwl_cfg + * @fw_name_pre: Firmware filename prefix. The api version and extension + * (.ucode) will be added to filename before loading from disk. The + * filename is constructed as fw_name_pre<api>.ucode. + * @ucode_api_max: Highest version of uCode API supported by driver. + * @ucode_api_min: Lowest version of uCode API supported by driver. + * @pa_type: used by 6000 series only to identify the type of Power Amplifier + * @need_dc_calib: need to perform init dc calibration + * @scan_antennas: available antenna for scan operation * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -300,9 +355,9 @@ struct iwl_mod_params { * * For example, * if (IWL_UCODE_API(priv->ucode_ver) >= 2) { - * Driver interacts with Firmware API version >= 2. + * Driver interacts with Firmware API version >= 2. * } else { - * Driver interacts with Firmware API version 1. + * Driver interacts with Firmware API version 1. * } * * The ideal usage of this infrastructure is to treat a new ucode API @@ -313,59 +368,28 @@ struct iwl_mod_params { * */ struct iwl_cfg { + /* params specific to an individual device within a device family */ const char *name; const char *fw_name_pre; const unsigned int ucode_api_max; const unsigned int ucode_api_min; + u8 valid_tx_ant; + u8 valid_rx_ant; unsigned int sku; - int eeprom_size; u16 eeprom_ver; u16 eeprom_calib_ver; - int num_of_queues; /* def: HW dependent */ - int num_of_ampdu_queues;/* def: HW dependent */ const struct iwl_ops *ops; + /* module based parameters which can be set from modprobe cmd */ const struct iwl_mod_params *mod_params; - u8 valid_tx_ant; - u8 valid_rx_ant; - - /* for iwl_apm_init() */ - u32 pll_cfg_val; - bool set_l0s; - bool use_bsm; - - bool use_isr_legacy; - enum iwl_pa_type pa_type; - const u16 max_ll_items; - const bool shadow_ram_support; - const bool ht_greenfield_support; - u16 led_compensation; - const bool broken_powersave; - bool use_rts_for_aggregation; - int chain_noise_num_beacons; - const bool supports_idle; - bool adv_thermal_throttle; - bool support_ct_kill_exit; - const bool support_wimax_coexist; - u8 plcp_delta_threshold; - s32 chain_noise_scale; - /* timer period for monitor the driver queues */ - u32 monitor_recover_period; - bool temperature_kelvin; - u32 max_event_log_size; - const bool tx_power_by_driver; - const bool ucode_tracing; - const bool sensitivity_calib_by_driver; - const bool chain_noise_calib_by_driver; + /* params not likely to change within a device family */ + struct iwl_base_params *base_params; + /* params likely to change within a device family */ + struct iwl_ht_params *ht_params; + struct iwl_bt_params *bt_params; + enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */ + const bool need_dc_calib; /* if used set to true */ u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; u8 scan_tx_antennas[IEEE80211_NUM_BANDS]; - bool advanced_bt_coexist; - u8 bt_init_traffic_load; - u8 bt_prio_boost; - const bool need_dc_calib; - const bool bt_statistics; - u16 agg_time_limit; - u8 ampdu_factor; - u8 ampdu_density; }; /*************************** |