summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/quantenna/qtnfmac/qlink.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/quantenna/qtnfmac/qlink.h')
-rw-r--r--drivers/net/wireless/quantenna/qtnfmac/qlink.h202
1 files changed, 189 insertions, 13 deletions
diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 6eafc15e0065..a8242f678496 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -19,7 +19,7 @@
#include <linux/ieee80211.h>
-#define QLINK_PROTO_VER 3
+#define QLINK_PROTO_VER 5
#define QLINK_MACID_RSVD 0xFF
#define QLINK_VIFID_RSVD 0xFF
@@ -77,6 +77,7 @@ enum qlink_iface_type {
QLINK_IFTYPE_ADHOC = 3,
QLINK_IFTYPE_MONITOR = 4,
QLINK_IFTYPE_WDS = 5,
+ QLINK_IFTYPE_AP_VLAN = 6,
};
/**
@@ -85,12 +86,12 @@ enum qlink_iface_type {
* Data describing a single virtual interface.
*
* @if_type: Mode of interface operation, one of &enum qlink_iface_type
- * @flags: interface flagsmap.
+ * @vlanid: VLAN ID for AP_VLAN interface type
* @mac_addr: MAC address of virtual interface.
*/
struct qlink_intf_info {
__le16 if_type;
- __le16 flags;
+ __le16 vlanid;
u8 mac_addr[ETH_ALEN];
u8 rsvd[2];
} __packed;
@@ -133,6 +134,9 @@ enum qlink_channel_width {
* number of operational channels and information on each of the channel.
* This command is generic to a specified MAC, interface index must be set
* to QLINK_VIFID_RSVD in command header.
+ * @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This
+ * command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE
+ * capability.
*/
enum qlink_cmd_type {
QLINK_CMD_FW_INIT = 0x0001,
@@ -148,8 +152,9 @@ enum qlink_cmd_type {
QLINK_CMD_DEL_INTF = 0x0016,
QLINK_CMD_CHANGE_INTF = 0x0017,
QLINK_CMD_UPDOWN_INTF = 0x0018,
- QLINK_CMD_REG_REGION = 0x0019,
+ QLINK_CMD_REG_NOTIFY = 0x0019,
QLINK_CMD_CHANS_INFO_GET = 0x001A,
+ QLINK_CMD_CHAN_SWITCH = 0x001B,
QLINK_CMD_CONFIG_AP = 0x0020,
QLINK_CMD_START_AP = 0x0021,
QLINK_CMD_STOP_AP = 0x0022,
@@ -161,6 +166,7 @@ enum qlink_cmd_type {
QLINK_CMD_CHANGE_STA = 0x0051,
QLINK_CMD_DEL_STA = 0x0052,
QLINK_CMD_SCAN = 0x0053,
+ QLINK_CMD_CHAN_STATS = 0x0054,
QLINK_CMD_CONNECT = 0x0060,
QLINK_CMD_DISCONNECT = 0x0061,
};
@@ -287,6 +293,7 @@ struct qlink_cmd_get_sta_info {
* @pairwise: whether to use pairwise key.
* @addr: MAC address of a STA key is being installed to.
* @cipher: cipher suite.
+ * @vlanid: VLAN ID for AP_VLAN interface type
* @key_data: key data itself.
*/
struct qlink_cmd_add_key {
@@ -295,6 +302,7 @@ struct qlink_cmd_add_key {
u8 pairwise;
u8 addr[ETH_ALEN];
__le32 cipher;
+ __le16 vlanid;
u8 key_data[0];
} __packed;
@@ -341,12 +349,16 @@ struct qlink_cmd_set_def_mgmt_key {
*
* @sta_flags_mask: STA flags mask, bitmap of &enum qlink_sta_flags
* @sta_flags_set: STA flags values, bitmap of &enum qlink_sta_flags
+ * @if_type: Mode of interface operation, one of &enum qlink_iface_type
+ * @vlanid: VLAN ID to assign to specific STA
* @sta_addr: address of the STA for which parameters are set.
*/
struct qlink_cmd_change_sta {
struct qlink_cmd chdr;
__le32 sta_flags_mask;
__le32 sta_flags_set;
+ __le16 if_type;
+ __le16 vlanid;
u8 sta_addr[ETH_ALEN];
} __packed;
@@ -380,7 +392,7 @@ enum qlink_sta_connect_flags {
struct qlink_cmd_connect {
struct qlink_cmd chdr;
__le32 flags;
- __le16 freq;
+ __le16 channel;
__le16 bg_scan_period;
u8 bssid[ETH_ALEN];
u8 payload[0];
@@ -430,6 +442,70 @@ struct qlink_cmd_chans_info_get {
u8 band;
} __packed;
+/**
+ * struct qlink_cmd_get_chan_stats - data for QLINK_CMD_CHAN_STATS command
+ *
+ * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
+ */
+struct qlink_cmd_get_chan_stats {
+ struct qlink_cmd chdr;
+ __le16 channel;
+} __packed;
+
+/**
+ * enum qlink_reg_initiator - Indicates the initiator of a reg domain request
+ *
+ * See &enum nl80211_reg_initiator for more info.
+ */
+enum qlink_reg_initiator {
+ QLINK_REGDOM_SET_BY_CORE,
+ QLINK_REGDOM_SET_BY_USER,
+ QLINK_REGDOM_SET_BY_DRIVER,
+ QLINK_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum qlink_user_reg_hint_type - type of user regulatory hint
+ *
+ * See &enum nl80211_user_reg_hint_type for more info.
+ */
+enum qlink_user_reg_hint_type {
+ QLINK_USER_REG_HINT_USER = 0,
+ QLINK_USER_REG_HINT_CELL_BASE = 1,
+ QLINK_USER_REG_HINT_INDOOR = 2,
+};
+
+/**
+ * struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command
+ *
+ * @alpha2: the ISO / IEC 3166 alpha2 country code.
+ * @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
+ * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
+ * of &enum qlink_user_reg_hint_type.
+ */
+struct qlink_cmd_reg_notify {
+ struct qlink_cmd chdr;
+ u8 alpha2[2];
+ u8 initiator;
+ u8 user_reg_hint_type;
+} __packed;
+
+/**
+ * struct qlink_cmd_chan_switch - data for QLINK_CMD_CHAN_SWITCH command
+ *
+ * @channel: channel number according to 802.11 17.3.8.3.2 and Annex J
+ * @radar_required: whether radar detection is required on the new channel
+ * @block_tx: whether transmissions should be blocked while changing
+ * @beacon_count: number of beacons until switch
+ */
+struct qlink_cmd_chan_switch {
+ struct qlink_cmd chdr;
+ __le16 channel;
+ u8 radar_required;
+ u8 block_tx;
+ u8 beacon_count;
+} __packed;
+
/* QLINK Command Responses messages related definitions
*/
@@ -438,6 +514,7 @@ enum qlink_cmd_result {
QLINK_CMD_RESULT_INVALID,
QLINK_CMD_RESULT_ENOTSUPP,
QLINK_CMD_RESULT_ENOTFOUND,
+ QLINK_CMD_RESULT_EALREADY,
};
/**
@@ -497,6 +574,18 @@ struct qlink_resp_get_mac_info {
} __packed;
/**
+ * enum qlink_dfs_regions - regulatory DFS regions
+ *
+ * Corresponds to &enum nl80211_dfs_regions.
+ */
+enum qlink_dfs_regions {
+ QLINK_DFS_UNSET = 0,
+ QLINK_DFS_FCC = 1,
+ QLINK_DFS_ETSI = 2,
+ QLINK_DFS_JP = 3,
+};
+
+/**
* struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
*
* Description of wireless hardware capabilities and features.
@@ -504,22 +593,29 @@ struct qlink_resp_get_mac_info {
* @fw_ver: wireless hardware firmware version.
* @hw_capab: Bitmap of capabilities supported by firmware.
* @ql_proto_ver: Version of QLINK protocol used by firmware.
- * @country_code: country code ID firmware is configured to.
* @num_mac: Number of separate physical radio devices provided by hardware.
* @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
* @total_tx_chains: total number of transmit chains used by device.
* @total_rx_chains: total number of receive chains.
+ * @alpha2: country code ID firmware is configured to.
+ * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
+ * message.
+ * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region.
+ * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE.
*/
struct qlink_resp_get_hw_info {
struct qlink_resp rhdr;
__le32 fw_ver;
__le32 hw_capab;
__le16 ql_proto_ver;
- u8 alpha2_code[2];
u8 num_mac;
u8 mac_bitmap;
u8 total_tx_chain;
u8 total_rx_chain;
+ u8 alpha2[2];
+ u8 n_reg_rules;
+ u8 dfs_region;
+ u8 info[0];
} __packed;
/**
@@ -574,6 +670,16 @@ struct qlink_resp_phy_params {
u8 info[0];
} __packed;
+/**
+ * struct qlink_resp_get_chan_stats - response for QLINK_CMD_CHAN_STATS cmd
+ *
+ * @info: variable-length channel info.
+ */
+struct qlink_resp_get_chan_stats {
+ struct qlink_cmd rhdr;
+ u8 info[0];
+} __packed;
+
/* QLINK Events messages related definitions
*/
@@ -585,6 +691,7 @@ enum qlink_event_type {
QLINK_EVENT_SCAN_COMPLETE = 0x0025,
QLINK_EVENT_BSS_JOIN = 0x0026,
QLINK_EVENT_BSS_LEAVE = 0x0027,
+ QLINK_EVENT_FREQ_CHANGE = 0x0028,
};
/**
@@ -651,7 +758,17 @@ struct qlink_event_bss_join {
*/
struct qlink_event_bss_leave {
struct qlink_event ehdr;
- u16 reason;
+ __le16 reason;
+} __packed;
+
+/**
+ * struct qlink_event_freq_change - data for QLINK_EVENT_FREQ_CHANGE event
+ *
+ * @freq: new operating frequency in MHz
+ */
+struct qlink_event_freq_change {
+ struct qlink_event ehdr;
+ __le32 freq;
} __packed;
enum qlink_rxmgmt_flags {
@@ -741,10 +858,12 @@ enum qlink_tlv_id {
QTN_TLV_ID_LRETRY_LIMIT = 0x0204,
QTN_TLV_ID_BCN_PERIOD = 0x0205,
QTN_TLV_ID_DTIM = 0x0206,
+ QTN_TLV_ID_REG_RULE = 0x0207,
QTN_TLV_ID_CHANNEL = 0x020F,
QTN_TLV_ID_COVERAGE_CLASS = 0x0213,
QTN_TLV_ID_IFACE_LIMIT = 0x0214,
QTN_TLV_ID_NUM_IFACE_COMB = 0x0215,
+ QTN_TLV_ID_CHANNEL_STATS = 0x0216,
QTN_TLV_ID_STA_BASIC_COUNTERS = 0x0300,
QTN_TLV_ID_STA_GENERIC_INFO = 0x0301,
QTN_TLV_ID_KEY = 0x0302,
@@ -761,7 +880,7 @@ struct qlink_tlv_hdr {
struct qlink_iface_limit {
__le16 max_num;
- __le16 type_mask;
+ __le16 type;
} __packed;
struct qlink_iface_comb_num {
@@ -844,12 +963,54 @@ struct qlink_tlv_cclass {
u8 cclass;
} __packed;
-enum qlink_dfs_state {
- QLINK_DFS_USABLE,
- QLINK_DFS_UNAVAILABLE,
- QLINK_DFS_AVAILABLE,
+/**
+ * enum qlink_reg_rule_flags - regulatory rule flags
+ *
+ * See description of &enum nl80211_reg_rule_flags
+ */
+enum qlink_reg_rule_flags {
+ QLINK_RRF_NO_OFDM = BIT(0),
+ QLINK_RRF_NO_CCK = BIT(1),
+ QLINK_RRF_NO_INDOOR = BIT(2),
+ QLINK_RRF_NO_OUTDOOR = BIT(3),
+ QLINK_RRF_DFS = BIT(4),
+ QLINK_RRF_PTP_ONLY = BIT(5),
+ QLINK_RRF_PTMP_ONLY = BIT(6),
+ QLINK_RRF_NO_IR = BIT(7),
+ QLINK_RRF_AUTO_BW = BIT(8),
+ QLINK_RRF_IR_CONCURRENT = BIT(9),
+ QLINK_RRF_NO_HT40MINUS = BIT(10),
+ QLINK_RRF_NO_HT40PLUS = BIT(11),
+ QLINK_RRF_NO_80MHZ = BIT(12),
+ QLINK_RRF_NO_160MHZ = BIT(13),
};
+/**
+ * struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV
+ *
+ * Regulatory rule description.
+ *
+ * @start_freq_khz: start frequency of the range the rule is attributed to.
+ * @end_freq_khz: end frequency of the range the rule is attributed to.
+ * @max_bandwidth_khz: max bandwidth that channels in specified range can be
+ * configured to.
+ * @max_antenna_gain: max antenna gain that can be used in the specified
+ * frequency range, dBi.
+ * @max_eirp: maximum EIRP.
+ * @flags: regulatory rule flags in &enum qlink_reg_rule_flags.
+ * @dfs_cac_ms: DFS CAC period.
+ */
+struct qlink_tlv_reg_rule {
+ struct qlink_tlv_hdr hdr;
+ __le32 start_freq_khz;
+ __le32 end_freq_khz;
+ __le32 max_bandwidth_khz;
+ __le32 max_antenna_gain;
+ __le32 max_eirp;
+ __le32 flags;
+ __le32 dfs_cac_ms;
+} __packed;
+
enum qlink_channel_flags {
QLINK_CHAN_DISABLED = BIT(0),
QLINK_CHAN_NO_IR = BIT(1),
@@ -865,6 +1026,12 @@ enum qlink_channel_flags {
QLINK_CHAN_NO_10MHZ = BIT(12),
};
+enum qlink_dfs_state {
+ QLINK_DFS_USABLE,
+ QLINK_DFS_UNAVAILABLE,
+ QLINK_DFS_AVAILABLE,
+};
+
struct qlink_tlv_channel {
struct qlink_tlv_hdr hdr;
__le16 hw_value;
@@ -898,4 +1065,13 @@ struct qlink_auth_encr {
u8 control_port_no_encrypt;
} __packed;
+struct qlink_chan_stats {
+ __le32 chan_num;
+ __le32 cca_tx;
+ __le32 cca_rx;
+ __le32 cca_busy;
+ __le32 cca_try;
+ s8 chan_noise;
+} __packed;
+
#endif /* _QTN_QLINK_H_ */