summaryrefslogtreecommitdiff
path: root/drivers/parport
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parport')
-rw-r--r--drivers/parport/Kconfig2
-rw-r--r--drivers/parport/daisy.c51
-rw-r--r--drivers/parport/ieee1284_ops.c62
-rw-r--r--drivers/parport/parport_cs.c120
-rw-r--r--drivers/parport/parport_pc.c30
-rw-r--r--drivers/parport/probe.c199
-rw-r--r--drivers/parport/share.c1
7 files changed, 245 insertions, 220 deletions
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 725a14119f2a..b8241561da45 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -77,7 +77,7 @@ config PARPORT_PC_SUPERIO
config PARPORT_PC_PCMCIA
tristate "Support for PCMCIA management for PC-style ports"
- depends on PARPORT!=n && (PCMCIA!=n && PARPORT_PC=m && PARPORT_PC || PARPORT_PC=y && PCMCIA)
+ depends on PCMCIA && PARPORT_PC
help
Say Y here if you need PCMCIA support for your PC-style parallel
ports. If unsure, say N.
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
index 075c7eb5c85d..9ee67321b630 100644
--- a/drivers/parport/daisy.c
+++ b/drivers/parport/daisy.c
@@ -144,9 +144,9 @@ again:
add_dev (numdevs++, port, -1);
/* Find out the legacy device's IEEE 1284 device ID. */
- deviceid = kmalloc (1000, GFP_KERNEL);
+ deviceid = kmalloc (1024, GFP_KERNEL);
if (deviceid) {
- if (parport_device_id (numdevs - 1, deviceid, 1000) > 2)
+ if (parport_device_id (numdevs - 1, deviceid, 1024) > 2)
detected++;
kfree (deviceid);
@@ -252,7 +252,7 @@ struct pardevice *parport_open (int devnum, const char *name,
selected = port->daisy;
parport_release (dev);
- if (selected != port->daisy) {
+ if (selected != daisy) {
/* No corresponding device. */
parport_unregister_device (dev);
return NULL;
@@ -344,9 +344,9 @@ static int cpp_daisy (struct parport *port, int cmd)
PARPORT_CONTROL_STROBE,
PARPORT_CONTROL_STROBE);
udelay (1);
+ s = parport_read_status (port);
parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
udelay (1);
- s = parport_read_status (port);
parport_write_data (port, 0xff); udelay (2);
return s;
@@ -395,15 +395,15 @@ int parport_daisy_select (struct parport *port, int daisy, int mode)
case IEEE1284_MODE_EPP:
case IEEE1284_MODE_EPPSL:
case IEEE1284_MODE_EPPSWE:
- return (cpp_daisy (port, 0x20 + daisy) &
- PARPORT_STATUS_ERROR);
+ return !(cpp_daisy (port, 0x20 + daisy) &
+ PARPORT_STATUS_ERROR);
// For these modes we should switch to ECP mode:
case IEEE1284_MODE_ECP:
case IEEE1284_MODE_ECPRLE:
case IEEE1284_MODE_ECPSWE:
- return (cpp_daisy (port, 0xd0 + daisy) &
- PARPORT_STATUS_ERROR);
+ return !(cpp_daisy (port, 0xd0 + daisy) &
+ PARPORT_STATUS_ERROR);
// Nothing was told for BECP in Daisy chain specification.
// May be it's wise to use ECP?
@@ -413,8 +413,8 @@ int parport_daisy_select (struct parport *port, int daisy, int mode)
case IEEE1284_MODE_BYTE:
case IEEE1284_MODE_COMPAT:
default:
- return (cpp_daisy (port, 0xe0 + daisy) &
- PARPORT_STATUS_ERROR);
+ return !(cpp_daisy (port, 0xe0 + daisy) &
+ PARPORT_STATUS_ERROR);
}
}
@@ -436,7 +436,7 @@ static int select_port (struct parport *port)
static int assign_addrs (struct parport *port)
{
- unsigned char s, last_dev;
+ unsigned char s;
unsigned char daisy;
int thisdev = numdevs;
int detected;
@@ -472,10 +472,13 @@ static int assign_addrs (struct parport *port)
}
parport_write_data (port, 0x78); udelay (2);
- last_dev = 0; /* We've just been speaking to a device, so we
- know there must be at least _one_ out there. */
+ s = parport_read_status (port);
- for (daisy = 0; daisy < 4; daisy++) {
+ for (daisy = 0;
+ (s & (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT))
+ == (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT)
+ && daisy < 4;
+ ++daisy) {
parport_write_data (port, daisy);
udelay (2);
parport_frob_control (port,
@@ -485,14 +488,18 @@ static int assign_addrs (struct parport *port)
parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
udelay (1);
- if (last_dev)
- /* No more devices. */
- break;
+ add_dev (numdevs++, port, daisy);
- last_dev = !(parport_read_status (port)
- & PARPORT_STATUS_BUSY);
+ /* See if this device thought it was the last in the
+ * chain. */
+ if (!(s & PARPORT_STATUS_BUSY))
+ break;
- add_dev (numdevs++, port, daisy);
+ /* We are seeing pass through status now. We see
+ last_dev from next device or if last_dev does not
+ work status lines from some non-daisy chain
+ device. */
+ s = parport_read_status (port);
}
parport_write_data (port, 0xff); udelay (2);
@@ -501,11 +508,11 @@ static int assign_addrs (struct parport *port)
detected);
/* Ask the new devices to introduce themselves. */
- deviceid = kmalloc (1000, GFP_KERNEL);
+ deviceid = kmalloc (1024, GFP_KERNEL);
if (!deviceid) return 0;
for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
- parport_device_id (thisdev, deviceid, 1000);
+ parport_device_id (thisdev, deviceid, 1024);
kfree (deviceid);
return detected;
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index ce1e2aad8b10..d6c77658231e 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -165,17 +165,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
/* Does the error line indicate end of data? */
if (((i & 1) == 0) &&
(parport_read_status(port) & PARPORT_STATUS_ERROR)) {
- port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
- DPRINTK (KERN_DEBUG
- "%s: No more nibble data (%d bytes)\n",
- port->name, i/2);
-
- /* Go to reverse idle phase. */
- parport_frob_control (port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
- port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- break;
+ goto end_of_data;
}
/* Event 7: Set nAutoFd low. */
@@ -225,18 +215,25 @@ size_t parport_ieee1284_read_nibble (struct parport *port,
byte = nibble;
}
- i /= 2; /* i is now in bytes */
-
if (i == len) {
/* Read the last nibble without checking data avail. */
- port = port->physport;
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ end_of_data:
+ DPRINTK (KERN_DEBUG
+ "%s: No more nibble data (%d bytes)\n",
+ port->name, i/2);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ }
else
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
}
- return i;
+ return i/2;
#endif /* IEEE1284 support */
}
@@ -256,17 +253,7 @@ size_t parport_ieee1284_read_byte (struct parport *port,
/* Data available? */
if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
- port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
- DPRINTK (KERN_DEBUG
- "%s: No more byte data (%Zd bytes)\n",
- port->name, count);
-
- /* Go to reverse idle phase. */
- parport_frob_control (port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
- port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- break;
+ goto end_of_data;
}
/* Event 14: Place data bus in high impedance state. */
@@ -318,11 +305,20 @@ size_t parport_ieee1284_read_byte (struct parport *port,
if (count == len) {
/* Read the last byte without checking data avail. */
- port = port->physport;
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ end_of_data:
+ DPRINTK (KERN_DEBUG
+ "%s: No more byte data (%Zd bytes)\n",
+ port->name, count);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ }
else
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
}
return count;
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 24e6aacddb74..158d92563259 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -87,15 +87,9 @@ typedef struct parport_info_t {
struct parport *port;
} parport_info_t;
-static dev_link_t *parport_attach(void);
-static void parport_detach(dev_link_t *);
+static void parport_detach(struct pcmcia_device *p_dev);
static void parport_config(dev_link_t *link);
static void parport_cs_release(dev_link_t *);
-static int parport_event(event_t event, int priority,
- event_callback_args_t *args);
-
-static dev_info_t dev_info = "parport_cs";
-static dev_link_t *dev_list = NULL;
/*======================================================================
@@ -105,18 +99,16 @@ static dev_link_t *dev_list = NULL;
======================================================================*/
-static dev_link_t *parport_attach(void)
+static int parport_attach(struct pcmcia_device *p_dev)
{
parport_info_t *info;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
-
+
DEBUG(0, "parport_attach()\n");
/* Create new parport device */
info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (!info) return NULL;
+ if (!info) return -ENOMEM;
memset(info, 0, sizeof(*info));
link = &info->link; link->priv = info;
@@ -127,21 +119,14 @@ static dev_link_t *parport_attach(void)
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
-
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- parport_detach(link);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ parport_config(link);
+
+ return 0;
} /* parport_attach */
/*======================================================================
@@ -153,32 +138,16 @@ static dev_link_t *parport_attach(void)
======================================================================*/
-static void parport_detach(dev_link_t *link)
+static void parport_detach(struct pcmcia_device *p_dev)
{
- dev_link_t **linkp;
- int ret;
+ dev_link_t *link = dev_to_instance(p_dev);
DEBUG(0, "parport_detach(0x%p)\n", link);
-
- /* Locate device structure */
- for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
- if (*linkp == link) break;
- if (*linkp == NULL)
- return;
if (link->state & DEV_CONFIG)
parport_cs_release(link);
-
- if (link->handle) {
- ret = pcmcia_deregister_client(link->handle);
- if (ret != CS_SUCCESS)
- cs_error(link->handle, DeregisterClient, ret);
- }
-
- /* Unlink, free device structure */
- *linkp = link->next;
+
kfree(link->priv);
-
} /* parport_detach */
/*======================================================================
@@ -325,47 +294,27 @@ void parport_cs_release(dev_link_t *link)
} /* parport_cs_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
-======================================================================*/
-
-int parport_event(event_t event, int priority,
- event_callback_args_t *args)
+static int parport_suspend(struct pcmcia_device *dev)
{
- dev_link_t *link = args->client_data;
+ dev_link_t *link = dev_to_instance(dev);
- DEBUG(1, "parport_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_REMOVAL:
- link->state &= ~DEV_PRESENT;
- if (link->state & DEV_CONFIG)
- parport_cs_release(link);
- break;
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- parport_config(link);
- break;
- case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG)
- pcmcia_release_configuration(link->handle);
- break;
- case CS_EVENT_PM_RESUME:
+ pcmcia_release_configuration(link->handle);
+
+ return 0;
+}
+
+static int parport_resume(struct pcmcia_device *dev)
+{
+ dev_link_t *link = dev_to_instance(dev);
+
link->state &= ~DEV_SUSPEND;
- /* Fall through... */
- case CS_EVENT_CARD_RESET:
if (DEV_OK(link))
- pcmcia_request_configuration(link->handle, &link->conf);
- break;
- }
- return 0;
-} /* parport_event */
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ return 0;
+}
static struct pcmcia_device_id parport_ids[] = {
PCMCIA_DEVICE_FUNC_ID(3),
@@ -379,11 +328,11 @@ static struct pcmcia_driver parport_cs_driver = {
.drv = {
.name = "parport_cs",
},
- .attach = parport_attach,
- .event = parport_event,
- .detach = parport_detach,
+ .probe = parport_attach,
+ .remove = parport_detach,
.id_table = parport_ids,
-
+ .suspend = parport_suspend,
+ .resume = parport_resume,
};
static int __init init_parport_cs(void)
@@ -394,7 +343,6 @@ static int __init init_parport_cs(void)
static void __exit exit_parport_cs(void)
{
pcmcia_unregister_driver(&parport_cs_driver);
- BUG_ON(dev_list != NULL);
}
module_init(init_parport_cs);
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index c6493ad7c0c8..18e85ccdae67 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1169,7 +1169,7 @@ dump_parport_state ("fwd idle", port);
/* GCC is not inlining extern inline function later overwriten to non-inline,
so we use outlined_ variants here. */
-static struct parport_operations parport_pc_ops =
+static const struct parport_operations parport_pc_ops =
{
.write_data = parport_pc_write_data,
.read_data = parport_pc_read_data,
@@ -1211,10 +1211,11 @@ static struct parport_operations parport_pc_ops =
static void __devinit show_parconfig_smsc37c669(int io, int key)
{
int cr1,cr4,cra,cr23,cr26,cr27,i=0;
- static const char *modes[]={ "SPP and Bidirectional (PS/2)",
- "EPP and SPP",
- "ECP",
- "ECP and EPP" };
+ static const char *const modes[]={
+ "SPP and Bidirectional (PS/2)",
+ "EPP and SPP",
+ "ECP",
+ "ECP and EPP" };
outb(key,io);
outb(key,io);
@@ -1288,7 +1289,7 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
static void __devinit show_parconfig_winbond(int io, int key)
{
int cr30,cr60,cr61,cr70,cr74,crf0,i=0;
- static const char *modes[] = {
+ static const char *const modes[] = {
"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
"EPP-1.9 and SPP",
"ECP",
@@ -1297,7 +1298,9 @@ static void __devinit show_parconfig_winbond(int io, int key)
"EPP-1.7 and SPP", /* 5 */
"undefined!",
"ECP and EPP-1.7" };
- static char *irqtypes[] = { "pulsed low, high-Z", "follows nACK" };
+ static char *const irqtypes[] = {
+ "pulsed low, high-Z",
+ "follows nACK" };
/* The registers are called compatible-PnP because the
register layout is modelled after ISA-PnP, the access
@@ -2396,7 +2399,8 @@ EXPORT_SYMBOL (parport_pc_unregister_port);
/* ITE support maintained by Rich Liu <richliu@poorman.org> */
static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq,
- int autodma, struct parport_pc_via_data *via)
+ int autodma,
+ const struct parport_pc_via_data *via)
{
short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
struct resource *base_res;
@@ -2524,7 +2528,8 @@ static struct parport_pc_via_data via_8231_data __devinitdata = {
};
static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq,
- int autodma, struct parport_pc_via_data *via)
+ int autodma,
+ const struct parport_pc_via_data *via)
{
u8 tmp, tmp2, siofunc;
u8 ppcontrol = 0;
@@ -2694,8 +2699,9 @@ enum parport_pc_sio_types {
/* each element directly indexed from enum list, above */
static struct parport_pc_superio {
- int (*probe) (struct pci_dev *pdev, int autoirq, int autodma, struct parport_pc_via_data *via);
- struct parport_pc_via_data *via;
+ int (*probe) (struct pci_dev *pdev, int autoirq, int autodma,
+ const struct parport_pc_via_data *via);
+ const struct parport_pc_via_data *via;
} parport_pc_superio_info[] __devinitdata = {
{ sio_via_probe, &via_686a_data, },
{ sio_via_probe, &via_8231_data, },
@@ -2828,7 +2834,7 @@ static struct parport_pc_pci {
/* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* untested */
};
-static struct pci_device_id parport_pc_pci_tbl[] = {
+static const struct pci_device_id parport_pc_pci_tbl[] = {
/* Super-IO onboard chips */
{ 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
{ 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index 4b48b31ec235..b62aee8de3cb 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -11,9 +11,9 @@
#include <linux/string.h>
#include <asm/uaccess.h>
-static struct {
- char *token;
- char *descr;
+static const struct {
+ const char *token;
+ const char *descr;
} classes[] = {
{ "", "Legacy device" },
{ "PRINTER", "Printer" },
@@ -128,8 +128,131 @@ static void parse_data(struct parport *port, int device, char *str)
kfree(txt);
}
+/* Read up to count-1 bytes of device id. Terminate buffer with
+ * '\0'. Buffer begins with two Device ID length bytes as given by
+ * device. */
+static ssize_t parport_read_device_id (struct parport *port, char *buffer,
+ size_t count)
+{
+ unsigned char length[2];
+ unsigned lelen, belen;
+ size_t idlens[4];
+ unsigned numidlens;
+ unsigned current_idlen;
+ ssize_t retval;
+ size_t len;
+
+ /* First two bytes are MSB,LSB of inclusive length. */
+ retval = parport_read (port, length, 2);
+
+ if (retval < 0)
+ return retval;
+ if (retval != 2)
+ return -EIO;
+
+ if (count < 2)
+ return 0;
+ memcpy(buffer, length, 2);
+ len = 2;
+
+ /* Some devices wrongly send LE length, and some send it two
+ * bytes short. Construct a sorted array of lengths to try. */
+ belen = (length[0] << 8) + length[1];
+ lelen = (length[1] << 8) + length[0];
+ idlens[0] = min(belen, lelen);
+ idlens[1] = idlens[0]+2;
+ if (belen != lelen) {
+ int off = 2;
+ /* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */
+ if (idlens[0] <= 2)
+ off = 0;
+ idlens[off] = max(belen, lelen);
+ idlens[off+1] = idlens[off]+2;
+ numidlens = off+2;
+ }
+ else {
+ /* Some devices don't truly implement Device ID, but
+ * just return constant nibble forever. This catches
+ * also those cases. */
+ if (idlens[0] == 0 || idlens[0] > 0xFFF) {
+ printk (KERN_DEBUG "%s: reported broken Device ID"
+ " length of %#zX bytes\n",
+ port->name, idlens[0]);
+ return -EIO;
+ }
+ numidlens = 2;
+ }
+
+ /* Try to respect the given ID length despite all the bugs in
+ * the ID length. Read according to shortest possible ID
+ * first. */
+ for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) {
+ size_t idlen = idlens[current_idlen];
+ if (idlen+1 >= count)
+ break;
+
+ retval = parport_read (port, buffer+len, idlen-len);
+
+ if (retval < 0)
+ return retval;
+ len += retval;
+
+ if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
+ if (belen != len) {
+ printk (KERN_DEBUG "%s: Device ID was %d bytes"
+ " while device told it would be %d"
+ " bytes\n",
+ port->name, len, belen);
+ }
+ goto done;
+ }
+
+ /* This might end reading the Device ID too
+ * soon. Hopefully the needed fields were already in
+ * the first 256 bytes or so that we must have read so
+ * far. */
+ if (buffer[len-1] == ';') {
+ printk (KERN_DEBUG "%s: Device ID reading stopped"
+ " before device told data not available. "
+ "Current idlen %d of %d, len bytes %02X %02X\n",
+ port->name, current_idlen, numidlens,
+ length[0], length[1]);
+ goto done;
+ }
+ }
+ if (current_idlen < numidlens) {
+ /* Buffer not large enough, read to end of buffer. */
+ size_t idlen, len2;
+ if (len+1 < count) {
+ retval = parport_read (port, buffer+len, count-len-1);
+ if (retval < 0)
+ return retval;
+ len += retval;
+ }
+ /* Read the whole ID since some devices would not
+ * otherwise give back the Device ID from beginning
+ * next time when asked. */
+ idlen = idlens[current_idlen];
+ len2 = len;
+ while(len2 < idlen && retval > 0) {
+ char tmp[4];
+ retval = parport_read (port, tmp,
+ min(sizeof tmp, idlen-len2));
+ if (retval < 0)
+ return retval;
+ len2 += retval;
+ }
+ }
+ /* In addition, there are broken devices out there that don't
+ even finish off with a semi-colon. We do not need to care
+ about those at this time. */
+ done:
+ buffer[len] = '\0';
+ return len;
+}
+
/* Get Std 1284 Device ID. */
-ssize_t parport_device_id (int devnum, char *buffer, size_t len)
+ssize_t parport_device_id (int devnum, char *buffer, size_t count)
{
ssize_t retval = -ENXIO;
struct pardevice *dev = parport_open (devnum, "Device ID probe",
@@ -139,76 +262,20 @@ ssize_t parport_device_id (int devnum, char *buffer, size_t len)
parport_claim_or_block (dev);
- /* Negotiate to compatibility mode, and then to device ID mode.
- * (This is in case we are already in device ID mode.) */
+ /* Negotiate to compatibility mode, and then to device ID
+ * mode. (This so that we start form beginning of device ID if
+ * already in device ID mode.) */
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
retval = parport_negotiate (dev->port,
IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
if (!retval) {
- int idlen;
- unsigned char length[2];
-
- /* First two bytes are MSB,LSB of inclusive length. */
- retval = parport_read (dev->port, length, 2);
-
- if (retval != 2) goto end_id;
-
- idlen = (length[0] << 8) + length[1] - 2;
- /*
- * Check if the caller-allocated buffer is large enough
- * otherwise bail out or there will be an at least off by one.
- */
- if (idlen + 1 < len)
- len = idlen;
- else {
- retval = -EINVAL;
- goto out;
- }
- retval = parport_read (dev->port, buffer, len);
-
- if (retval != len)
- printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n",
- dev->port->name, retval,
- len);
-
- /* Some printer manufacturers mistakenly believe that
- the length field is supposed to be _exclusive_.
- In addition, there are broken devices out there
- that don't even finish off with a semi-colon. */
- if (buffer[len - 1] != ';') {
- ssize_t diff;
- diff = parport_read (dev->port, buffer + len, 2);
- retval += diff;
-
- if (diff)
- printk (KERN_DEBUG
- "%s: device reported incorrect "
- "length field (%d, should be %Zd)\n",
- dev->port->name, idlen, retval);
- else {
- /* One semi-colon short of a device ID. */
- buffer[len++] = ';';
- printk (KERN_DEBUG "%s: faking semi-colon\n",
- dev->port->name);
-
- /* If we get here, I don't think we
- need to worry about the possible
- standard violation of having read
- more than we were told to. The
- device is non-compliant anyhow. */
- }
- }
-
- end_id:
- buffer[len] = '\0';
+ retval = parport_read_device_id (dev->port, buffer, count);
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+ if (retval > 2)
+ parse_data (dev->port, dev->daisy, buffer+2);
}
- if (retval > 2)
- parse_data (dev->port, dev->daisy, buffer);
-
-out:
parport_release (dev);
parport_close (dev);
return retval;
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index 9cb3ab156b09..ea62bed6bc83 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -1002,6 +1002,7 @@ EXPORT_SYMBOL(parport_register_driver);
EXPORT_SYMBOL(parport_unregister_driver);
EXPORT_SYMBOL(parport_register_device);
EXPORT_SYMBOL(parport_unregister_device);
+EXPORT_SYMBOL(parport_get_port);
EXPORT_SYMBOL(parport_put_port);
EXPORT_SYMBOL(parport_find_number);
EXPORT_SYMBOL(parport_find_base);