diff options
Diffstat (limited to 'drivers/pci/controller')
-rw-r--r-- | drivers/pci/controller/pci-hyperv.c | 139 |
1 files changed, 82 insertions, 57 deletions
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index bc32662c6bb7..2d93d0c4f10d 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -489,7 +489,10 @@ struct hv_pcibus_device { struct fwnode_handle *fwnode; /* Protocol version negotiated with the host */ enum pci_protocol_version_t protocol_version; + + struct mutex state_lock; enum hv_pcibus_state state; + struct hv_device *hdev; resource_size_t low_mmio_space; resource_size_t high_mmio_space; @@ -545,19 +548,10 @@ struct hv_dr_state { struct hv_pcidev_description func[]; }; -enum hv_pcichild_state { - hv_pcichild_init = 0, - hv_pcichild_requirements, - hv_pcichild_resourced, - hv_pcichild_ejecting, - hv_pcichild_maximum -}; - struct hv_pci_dev { /* List protected by pci_rescan_remove_lock */ struct list_head list_entry; refcount_t refs; - enum hv_pcichild_state state; struct pci_slot *pci_slot; struct hv_pcidev_description desc; bool reported_missing; @@ -635,6 +629,11 @@ static void hv_arch_irq_unmask(struct irq_data *data) pbus = pdev->bus; hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata); int_desc = data->chip_data; + if (!int_desc) { + dev_warn(&hbus->hdev->device, "%s() can not unmask irq %u\n", + __func__, data->irq); + return; + } local_irq_save(flags); @@ -2004,12 +2003,6 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) hv_pci_onchannelcallback(hbus); spin_unlock_irqrestore(&channel->sched_lock, flags); - if (hpdev->state == hv_pcichild_ejecting) { - dev_err_once(&hbus->hdev->device, - "the device is being ejected\n"); - goto enable_tasklet; - } - udelay(100); } @@ -2615,6 +2608,8 @@ static void pci_devices_present_work(struct work_struct *work) if (!dr) return; + mutex_lock(&hbus->state_lock); + /* First, mark all existing children as reported missing. */ spin_lock_irqsave(&hbus->device_list_lock, flags); list_for_each_entry(hpdev, &hbus->children, list_entry) { @@ -2696,6 +2691,8 @@ static void pci_devices_present_work(struct work_struct *work) break; } + mutex_unlock(&hbus->state_lock); + kfree(dr); } @@ -2844,7 +2841,7 @@ static void hv_eject_device_work(struct work_struct *work) hpdev = container_of(work, struct hv_pci_dev, wrk); hbus = hpdev->hbus; - WARN_ON(hpdev->state != hv_pcichild_ejecting); + mutex_lock(&hbus->state_lock); /* * Ejection can come before or after the PCI bus has been set up, so @@ -2882,6 +2879,8 @@ static void hv_eject_device_work(struct work_struct *work) put_pcichild(hpdev); put_pcichild(hpdev); /* hpdev has been freed. Do not use it any more. */ + + mutex_unlock(&hbus->state_lock); } /** @@ -2902,7 +2901,6 @@ static void hv_pci_eject_device(struct hv_pci_dev *hpdev) return; } - hpdev->state = hv_pcichild_ejecting; get_pcichild(hpdev); INIT_WORK(&hpdev->wrk, hv_eject_device_work); queue_work(hbus->wq, &hpdev->wrk); @@ -3331,8 +3329,10 @@ static int hv_pci_enter_d0(struct hv_device *hdev) struct pci_bus_d0_entry *d0_entry; struct hv_pci_compl comp_pkt; struct pci_packet *pkt; + bool retry = true; int ret; +enter_d0_retry: /* * Tell the host that the bus is ready to use, and moved into the * powered-on state. This includes telling the host which region @@ -3359,6 +3359,38 @@ static int hv_pci_enter_d0(struct hv_device *hdev) if (ret) goto exit; + /* + * In certain case (Kdump) the pci device of interest was + * not cleanly shut down and resource is still held on host + * side, the host could return invalid device status. + * We need to explicitly request host to release the resource + * and try to enter D0 again. + */ + if (comp_pkt.completion_status < 0 && retry) { + retry = false; + + dev_err(&hdev->device, "Retrying D0 Entry\n"); + + /* + * Hv_pci_bus_exit() calls hv_send_resource_released() + * to free up resources of its child devices. + * In the kdump kernel we need to set the + * wslot_res_allocated to 255 so it scans all child + * devices to release resources allocated in the + * normal kernel before panic happened. + */ + hbus->wslot_res_allocated = 255; + + ret = hv_pci_bus_exit(hdev, true); + + if (ret == 0) { + kfree(pkt); + goto enter_d0_retry; + } + dev_err(&hdev->device, + "Retrying D0 failed with ret %d\n", ret); + } + if (comp_pkt.completion_status < 0) { dev_err(&hdev->device, "PCI Pass-through VSP failed D0 Entry with status %x\n", @@ -3401,6 +3433,24 @@ static int hv_pci_query_relations(struct hv_device *hdev) if (!ret) ret = wait_for_response(hdev, &comp); + /* + * In the case of fast device addition/removal, it's possible that + * vmbus_sendpacket() or wait_for_response() returns -ENODEV but we + * already got a PCI_BUS_RELATIONS* message from the host and the + * channel callback already scheduled a work to hbus->wq, which can be + * running pci_devices_present_work() -> survey_child_resources() -> + * complete(&hbus->survey_event), even after hv_pci_query_relations() + * exits and the stack variable 'comp' is no longer valid; as a result, + * a hang or a page fault may happen when the complete() calls + * raw_spin_lock_irqsave(). Flush hbus->wq before we exit from + * hv_pci_query_relations() to avoid the issues. Note: if 'ret' is + * -ENODEV, there can't be any more work item scheduled to hbus->wq + * after the flush_workqueue(): see vmbus_onoffer_rescind() -> + * vmbus_reset_channel_cb(), vmbus_rescind_cleanup() -> + * channel->rescind = true. + */ + flush_workqueue(hbus->wq); + return ret; } @@ -3586,7 +3636,6 @@ static int hv_pci_probe(struct hv_device *hdev, struct hv_pcibus_device *hbus; u16 dom_req, dom; char *name; - bool enter_d0_retry = true; int ret; bridge = devm_pci_alloc_host_bridge(&hdev->device, 0); @@ -3598,6 +3647,7 @@ static int hv_pci_probe(struct hv_device *hdev, return -ENOMEM; hbus->bridge = bridge; + mutex_init(&hbus->state_lock); hbus->state = hv_pcibus_init; hbus->wslot_res_allocated = -1; @@ -3703,49 +3753,15 @@ static int hv_pci_probe(struct hv_device *hdev, if (ret) goto free_fwnode; -retry: ret = hv_pci_query_relations(hdev); if (ret) goto free_irq_domain; - ret = hv_pci_enter_d0(hdev); - /* - * In certain case (Kdump) the pci device of interest was - * not cleanly shut down and resource is still held on host - * side, the host could return invalid device status. - * We need to explicitly request host to release the resource - * and try to enter D0 again. - * Since the hv_pci_bus_exit() call releases structures - * of all its child devices, we need to start the retry from - * hv_pci_query_relations() call, requesting host to send - * the synchronous child device relations message before this - * information is needed in hv_send_resources_allocated() - * call later. - */ - if (ret == -EPROTO && enter_d0_retry) { - enter_d0_retry = false; - - dev_err(&hdev->device, "Retrying D0 Entry\n"); - - /* - * Hv_pci_bus_exit() calls hv_send_resources_released() - * to free up resources of its child devices. - * In the kdump kernel we need to set the - * wslot_res_allocated to 255 so it scans all child - * devices to release resources allocated in the - * normal kernel before panic happened. - */ - hbus->wslot_res_allocated = 255; - ret = hv_pci_bus_exit(hdev, true); - - if (ret == 0) - goto retry; + mutex_lock(&hbus->state_lock); - dev_err(&hdev->device, - "Retrying D0 failed with ret %d\n", ret); - } + ret = hv_pci_enter_d0(hdev); if (ret) - goto free_irq_domain; + goto release_state_lock; ret = hv_pci_allocate_bridge_windows(hbus); if (ret) @@ -3763,12 +3779,15 @@ retry: if (ret) goto free_windows; + mutex_unlock(&hbus->state_lock); return 0; free_windows: hv_pci_free_bridge_windows(hbus); exit_d0: (void) hv_pci_bus_exit(hdev, true); +release_state_lock: + mutex_unlock(&hbus->state_lock); free_irq_domain: irq_domain_remove(hbus->irq_domain); free_fwnode: @@ -4018,20 +4037,26 @@ static int hv_pci_resume(struct hv_device *hdev) if (ret) goto out; + mutex_lock(&hbus->state_lock); + ret = hv_pci_enter_d0(hdev); if (ret) - goto out; + goto release_state_lock; ret = hv_send_resources_allocated(hdev); if (ret) - goto out; + goto release_state_lock; prepopulate_bars(hbus); hv_pci_restore_msi_state(hbus); hbus->state = hv_pcibus_installed; + mutex_unlock(&hbus->state_lock); return 0; + +release_state_lock: + mutex_unlock(&hbus->state_lock); out: vmbus_close(hdev->channel); return ret; |