summaryrefslogtreecommitdiff
path: root/drivers/phy/mediatek
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/mediatek')
-rw-r--r--drivers/phy/mediatek/Kconfig14
-rw-r--r--drivers/phy/mediatek/Makefile5
-rw-r--r--drivers/phy/mediatek/phy-mtk-tphy.c1081
3 files changed, 1100 insertions, 0 deletions
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
new file mode 100644
index 000000000000..88ab4e25e34f
--- /dev/null
+++ b/drivers/phy/mediatek/Kconfig
@@ -0,0 +1,14 @@
+#
+# Phy drivers for Mediatek devices
+#
+config PHY_MTK_TPHY
+ tristate "MediaTek T-PHY Driver"
+ depends on ARCH_MEDIATEK && OF
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for MediaTek T-PHY driver,
+ it supports multiple usb2.0, usb3.0 ports, PCIe and
+ SATA, and meanwhile supports two version T-PHY which have
+ different banks layout, the T-PHY with shared banks between
+ multi-ports is first version, otherwise is second veriosn,
+ so you can easily distinguish them by banks layout.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
new file mode 100644
index 000000000000..763a92eefa00
--- /dev/null
+++ b/drivers/phy/mediatek/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
new file mode 100644
index 000000000000..e3baad78521f
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -0,0 +1,1081 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* version V1 sub-banks offset base address */
+/* banks shared by multiple phys */
+#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
+/* u2 phy bank */
+#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V1_U3PHYD 0x000
+#define SSUSB_SIFSLV_V1_U3PHYA 0x200
+
+/* version V2 sub-banks offset base address */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC 0x000
+#define SSUSB_SIFSLV_V2_U2FREQ 0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC 0x000
+#define SSUSB_SIFSLV_V2_CHIP 0x100
+#define SSUSB_SIFSLV_V2_U3PHYD 0x200
+#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+
+#define U3P_USBPHYACR0 0x000
+#define PA0_RG_U2PLL_FORCE_ON BIT(15)
+#define PA0_RG_USB20_INTR_EN BIT(5)
+
+#define U3P_USBPHYACR2 0x008
+#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
+
+#define U3P_USBPHYACR5 0x014
+#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
+#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
+#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
+#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
+
+#define U3P_USBPHYACR6 0x018
+#define PA6_RG_U2_BC11_SW_EN BIT(23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
+#define PA6_RG_U2_SQTH GENMASK(3, 0)
+#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
+
+#define U3P_U2PHYACR4 0x020
+#define P2C_RG_USB20_GPIO_CTL BIT(9)
+#define P2C_USB20_GPIO_MODE BIT(8)
+#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3D_U2PHYDCR0 0x060
+#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
+
+#define U3P_U2PHYDTM0 0x068
+#define P2C_FORCE_UART_EN BIT(26)
+#define P2C_FORCE_DATAIN BIT(23)
+#define P2C_FORCE_DM_PULLDOWN BIT(21)
+#define P2C_FORCE_DP_PULLDOWN BIT(20)
+#define P2C_FORCE_XCVRSEL BIT(19)
+#define P2C_FORCE_SUSPENDM BIT(18)
+#define P2C_FORCE_TERMSEL BIT(17)
+#define P2C_RG_DATAIN GENMASK(13, 10)
+#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
+#define P2C_RG_DMPULLDOWN BIT(7)
+#define P2C_RG_DPPULLDOWN BIT(6)
+#define P2C_RG_XCVRSEL GENMASK(5, 4)
+#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
+#define P2C_RG_SUSPENDM BIT(3)
+#define P2C_RG_TERMSEL BIT(2)
+#define P2C_DTM0_PART_MASK \
+ (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+ P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+ P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1 0x06C
+#define P2C_RG_UART_EN BIT(16)
+#define P2C_RG_VBUSVALID BIT(5)
+#define P2C_RG_SESSEND BIT(4)
+#define P2C_RG_AVALID BIT(2)
+
+#define U3P_U3_CHIP_GPIO_CTLD 0x0c
+#define P3C_REG_IP_SW_RST BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
+#define P3C_FORCE_IP_SW_RST BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE 0x10
+#define P3C_RG_SWRST_U3_PHYD BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
+
+#define U3P_U3_PHYA_REG0 0x000
+#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
+#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
+
+#define U3P_U3_PHYA_REG1 0x004
+#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
+#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
+
+#define U3P_U3_PHYA_REG6 0x018
+#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
+#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
+
+#define U3P_U3_PHYA_REG9 0x024
+#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
+#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
+
+#define U3P_U3_PHYA_DA_REG0 0x100
+#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
+#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
+#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
+#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
+
+#define U3P_U3_PHYA_DA_REG4 0x108
+#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
+#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
+
+#define U3P_U3_PHYA_DA_REG5 0x10c
+#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
+#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
+#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
+#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
+
+#define U3P_U3_PHYA_DA_REG6 0x110
+#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG7 0x114
+#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG20 0x13c
+#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
+#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG25 0x148
+#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
+#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
+
+#define U3P_U3_PHYD_LFPS1 0x00c
+#define P3D_RG_FWAKE_TH GENMASK(21, 16)
+#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
+
+#define U3P_U3_PHYD_CDR1 0x05c
+#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
+#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
+#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
+#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
+
+#define U3P_U3_PHYD_RXDET1 0x128
+#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
+#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
+
+#define U3P_U3_PHYD_RXDET2 0x12c
+#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
+#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
+
+#define U3P_SPLLC_XTALCTL3 0x018
+#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+
+#define U3P_U2FREQ_FMCR0 0x00
+#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
+#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26)
+#define P2F_RG_FREQDET_EN BIT(24)
+#define P2F_RG_CYCLECNT GENMASK(23, 0)
+#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
+
+#define U3P_U2FREQ_VALUE 0x0c
+
+#define U3P_U2FREQ_FMMONR1 0x10
+#define P2F_USB_FM_VALID BIT(0)
+#define P2F_RG_FRCK_EN BIT(8)
+
+#define U3P_REF_CLK 26 /* MHZ */
+#define U3P_SLEW_RATE_COEF 28
+#define U3P_SR_COEF_DIVISOR 1000
+#define U3P_FM_DET_CYCLE_CNT 1024
+
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4 0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2 0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9 0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x) (0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1 0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4 0x58
+#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6 0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
+
+enum mtk_phy_version {
+ MTK_PHY_V1 = 1,
+ MTK_PHY_V2,
+};
+
+struct mtk_phy_pdata {
+ /* avoid RX sensitivity level degradation only for mt8173 */
+ bool avoid_rx_sen_degradation;
+ enum mtk_phy_version version;
+};
+
+struct u2phy_banks {
+ void __iomem *misc;
+ void __iomem *fmreg;
+ void __iomem *com;
+};
+
+struct u3phy_banks {
+ void __iomem *spllc;
+ void __iomem *chip;
+ void __iomem *phyd; /* include u3phyd_bank2 */
+ void __iomem *phya; /* include u3phya_da */
+};
+
+struct mtk_phy_instance {
+ struct phy *phy;
+ void __iomem *port_base;
+ union {
+ struct u2phy_banks u2_banks;
+ struct u3phy_banks u3_banks;
+ };
+ struct clk *ref_clk; /* reference clock of anolog phy */
+ u32 index;
+ u8 type;
+};
+
+struct mtk_tphy {
+ struct device *dev;
+ void __iomem *sif_base; /* only shared sif */
+ /* deprecated, use @ref_clk instead in phy instance */
+ struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
+ const struct mtk_phy_pdata *pdata;
+ struct mtk_phy_instance **phys;
+ int nphys;
+};
+
+static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *fmreg = u2_banks->fmreg;
+ void __iomem *com = u2_banks->com;
+ int calibration_val;
+ int fm_out;
+ u32 tmp;
+
+ /* enable USB ring oscillator */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+ udelay(1);
+
+ /*enable free run clock */
+ tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
+ tmp |= P2F_RG_FRCK_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
+
+ /* set cycle count as 1024, and select u2 channel */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
+ tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
+ if (tphy->pdata->version == MTK_PHY_V1)
+ tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
+
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /* enable frequency meter */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp |= P2F_RG_FREQDET_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /* ignore return value */
+ readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
+ (tmp & P2F_USB_FM_VALID), 10, 200);
+
+ fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
+
+ /* disable frequency meter */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp &= ~P2F_RG_FREQDET_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /*disable free run clock */
+ tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
+ tmp &= ~P2F_RG_FRCK_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
+
+ if (fm_out) {
+ /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
+ tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
+ tmp /= fm_out;
+ calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
+ } else {
+ /* if FM detection fail, set default value */
+ calibration_val = 4;
+ }
+ dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n",
+ instance->index, fm_out, calibration_val);
+
+ /* set HS slew rate */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+ tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val);
+ writel(tmp, com + U3P_USBPHYACR5);
+
+ /* disable USB ring oscillator */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+}
+
+static void u3_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ /* gating PCIe Analog XTAL clock */
+ tmp = readl(u3_banks->spllc + U3P_SPLLC_XTALCTL3);
+ tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
+ writel(tmp, u3_banks->spllc + U3P_SPLLC_XTALCTL3);
+
+ /* gating XSQ */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
+ tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG9);
+ tmp &= ~P3A_RG_RX_DAC_MUX;
+ tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG9);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG6);
+ tmp &= ~P3A_RG_TX_EIDLE_CM;
+ tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG6);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_CDR1);
+ tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
+ tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_CDR1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_LFPS1);
+ tmp &= ~P3D_RG_FWAKE_TH;
+ tmp |= P3D_RG_FWAKE_TH_VAL(0x34);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_LFPS1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u2_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ /* switch to USB function. (system register, force ip into usb mode) */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_FORCE_UART_EN;
+ tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp &= ~P2C_RG_UART_EN;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ tmp = readl(com + U3P_USBPHYACR0);
+ tmp |= PA0_RG_USB20_INTR_EN;
+ writel(tmp, com + U3P_USBPHYACR0);
+
+ /* disable switch 100uA current to SSUSB */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+
+ if (!index) {
+ tmp = readl(com + U3P_U2PHYACR4);
+ tmp &= ~P2C_U2_GPIO_CTR_MSK;
+ writel(tmp, com + U3P_U2PHYACR4);
+ }
+
+ if (tphy->pdata->avoid_rx_sen_degradation) {
+ if (!index) {
+ tmp = readl(com + U3P_USBPHYACR2);
+ tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
+ writel(tmp, com + U3P_USBPHYACR2);
+
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+ } else {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+ }
+
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */
+ tmp &= ~PA6_RG_U2_SQTH;
+ tmp |= PA6_RG_U2_SQTH_VAL(2);
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
+ tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ /* OTG Enable */
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
+ tmp &= ~P2C_RG_SESSEND;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
+ tmp |= P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ /* OTG Disable */
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ /* let suspendm=0, set utmi into analog power down */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_RG_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ udelay(1);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
+ tmp |= P2C_RG_SESSEND;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+ }
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_exit(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+}
+
+static void pcie_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ if (tphy->pdata->version != MTK_PHY_V1)
+ return;
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
+ tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ /* ref clk drive */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
+ tmp &= ~P3A_RG_CLKDRV_AMP;
+ tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ tmp &= ~P3A_RG_CLKDRV_OFF;
+ tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+
+ /* SSC delta -5000ppm */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+ tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
+ tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+ tmp &= ~P3A_RG_PLL_DELTA_PE2H;
+ tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+
+ /* change pll BW 0.6M */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+ tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
+ tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+ tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
+ tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+ tmp &= ~P3A_RG_PLL_IR_PE2H;
+ tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+ tmp &= ~P3A_RG_PLL_BP_PE2H;
+ tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+
+ /* Tx Detect Rx Timing: 10us -> 5us */
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ /* wait for PCIe subsys register to active */
+ usleep_range(2500, 3000);
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
+ P3C_REG_IP_SW_RST);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ void __iomem *phyd = u3_banks->phyd;
+ u32 tmp;
+
+ /* charge current adjustment */
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL6);
+ tmp &= ~(RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK);
+ tmp |= RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL6);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+ tmp &= ~RG_CDR_BIRLTD0_GEN1_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN1_VAL(0x18);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+ tmp &= ~RG_CDR_BIRLTD0_GEN3_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN3_VAL(0x06);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL4);
+ tmp &= ~(RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK);
+ tmp |= RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + PHYD_CTRL_SIGNAL_MODE4);
+ tmp &= ~(RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK);
+ tmp |= RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02);
+ writel(tmp, phyd + PHYD_CTRL_SIGNAL_MODE4);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION2);
+ tmp &= ~RG_LOCK_CNT_SEL_MSK;
+ tmp |= RG_LOCK_CNT_SEL_VAL(0x02);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION2);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION9);
+ tmp &= ~(RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+ RG_T2_MAX_MSK | RG_TG_MAX_MSK);
+ tmp |= RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+ RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION9);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL1);
+ tmp &= ~RG_IDRV_0DB_GEN1_MSK;
+ tmp |= RG_IDRV_0DB_GEN1_VAL(0x20);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL1);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+ tmp &= ~RG_EQ_DLEQ_LFI_GEN1_MSK;
+ tmp |= RG_EQ_DLEQ_LFI_GEN1_VAL(0x03);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void phy_v1_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = NULL;
+ u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+ u3_banks->chip = NULL;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+ break;
+ case PHY_TYPE_SATA:
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+ u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
+static int mtk_phy_init(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ ret = clk_prepare_enable(tphy->u3phya_ref);
+ if (ret) {
+ dev_err(tphy->dev, "failed to enable u3phya_ref\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(instance->ref_clk);
+ if (ret) {
+ dev_err(tphy->dev, "failed to enable ref_clk\n");
+ return ret;
+ }
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_USB3:
+ u3_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_PCIE:
+ pcie_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_SATA:
+ sata_phy_instance_init(tphy, instance);
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mtk_phy_power_on(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2) {
+ u2_phy_instance_power_on(tphy, instance);
+ hs_slew_rate_calibrate(tphy, instance);
+ } else if (instance->type == PHY_TYPE_PCIE) {
+ pcie_phy_instance_power_on(tphy, instance);
+ }
+
+ return 0;
+}
+
+static int mtk_phy_power_off(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_power_off(tphy, instance);
+ else if (instance->type == PHY_TYPE_PCIE)
+ pcie_phy_instance_power_off(tphy, instance);
+
+ return 0;
+}
+
+static int mtk_phy_exit(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_exit(tphy, instance);
+
+ clk_disable_unprepare(instance->ref_clk);
+ clk_disable_unprepare(tphy->u3phya_ref);
+ return 0;
+}
+
+static struct phy *mtk_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mtk_tphy *tphy = dev_get_drvdata(dev);
+ struct mtk_phy_instance *instance = NULL;
+ struct device_node *phy_np = args->np;
+ int index;
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of cells in 'phy' property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (index = 0; index < tphy->nphys; index++)
+ if (phy_np == tphy->phys[index]->phy->dev.of_node) {
+ instance = tphy->phys[index];
+ break;
+ }
+
+ if (!instance) {
+ dev_err(dev, "failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ instance->type = args->args[0];
+ if (!(instance->type == PHY_TYPE_USB2 ||
+ instance->type == PHY_TYPE_USB3 ||
+ instance->type == PHY_TYPE_PCIE ||
+ instance->type == PHY_TYPE_SATA)) {
+ dev_err(dev, "unsupported device type: %d\n", instance->type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (tphy->pdata->version == MTK_PHY_V1) {
+ phy_v1_banks_init(tphy, instance);
+ } else if (tphy->pdata->version == MTK_PHY_V2) {
+ phy_v2_banks_init(tphy, instance);
+ } else {
+ dev_err(dev, "phy version is not supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return instance->phy;
+}
+
+static const struct phy_ops mtk_tphy_ops = {
+ .init = mtk_phy_init,
+ .exit = mtk_phy_exit,
+ .power_on = mtk_phy_power_on,
+ .power_off = mtk_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct mtk_phy_pdata tphy_v1_pdata = {
+ .avoid_rx_sen_degradation = false,
+ .version = MTK_PHY_V1,
+};
+
+static const struct mtk_phy_pdata tphy_v2_pdata = {
+ .avoid_rx_sen_degradation = false,
+ .version = MTK_PHY_V2,
+};
+
+static const struct mtk_phy_pdata mt8173_pdata = {
+ .avoid_rx_sen_degradation = true,
+ .version = MTK_PHY_V1,
+};
+
+static const struct of_device_id mtk_tphy_id_table[] = {
+ { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
+ { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
+ { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+ { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
+ { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
+
+static int mtk_tphy_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct phy_provider *provider;
+ struct resource *sif_res;
+ struct mtk_tphy *tphy;
+ struct resource res;
+ int port, retval;
+
+ match = of_match_node(mtk_tphy_id_table, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
+ tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
+ if (!tphy)
+ return -ENOMEM;
+
+ tphy->pdata = match->data;
+ tphy->nphys = of_get_child_count(np);
+ tphy->phys = devm_kcalloc(dev, tphy->nphys,
+ sizeof(*tphy->phys), GFP_KERNEL);
+ if (!tphy->phys)
+ return -ENOMEM;
+
+ tphy->dev = dev;
+ platform_set_drvdata(pdev, tphy);
+
+ if (tphy->pdata->version == MTK_PHY_V1) {
+ /* get banks shared by multiple phys */
+ sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tphy->sif_base = devm_ioremap_resource(dev, sif_res);
+ if (IS_ERR(tphy->sif_base)) {
+ dev_err(dev, "failed to remap sif regs\n");
+ return PTR_ERR(tphy->sif_base);
+ }
+ }
+
+ /* it's deprecated, make it optional for backward compatibility */
+ tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
+ if (IS_ERR(tphy->u3phya_ref)) {
+ if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ tphy->u3phya_ref = NULL;
+ }
+
+ port = 0;
+ for_each_child_of_node(np, child_np) {
+ struct mtk_phy_instance *instance;
+ struct phy *phy;
+
+ instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
+ if (!instance) {
+ retval = -ENOMEM;
+ goto put_child;
+ }
+
+ tphy->phys[port] = instance;
+
+ phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ retval = PTR_ERR(phy);
+ goto put_child;
+ }
+
+ retval = of_address_to_resource(child_np, 0, &res);
+ if (retval) {
+ dev_err(dev, "failed to get address resource(id-%d)\n",
+ port);
+ goto put_child;
+ }
+
+ instance->port_base = devm_ioremap_resource(&phy->dev, &res);
+ if (IS_ERR(instance->port_base)) {
+ dev_err(dev, "failed to remap phy regs\n");
+ retval = PTR_ERR(instance->port_base);
+ goto put_child;
+ }
+
+ instance->phy = phy;
+ instance->index = port;
+ phy_set_drvdata(phy, instance);
+ port++;
+
+ /* if deprecated clock is provided, ignore instance's one */
+ if (tphy->u3phya_ref)
+ continue;
+
+ instance->ref_clk = devm_clk_get(&phy->dev, "ref");
+ if (IS_ERR(instance->ref_clk)) {
+ dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
+ retval = PTR_ERR(instance->ref_clk);
+ goto put_child;
+ }
+ }
+
+ provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+put_child:
+ of_node_put(child_np);
+ return retval;
+}
+
+static struct platform_driver mtk_tphy_driver = {
+ .probe = mtk_tphy_probe,
+ .driver = {
+ .name = "mtk-tphy",
+ .of_match_table = mtk_tphy_id_table,
+ },
+};
+
+module_platform_driver(mtk_tphy_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek T-PHY driver");
+MODULE_LICENSE("GPL v2");