summaryrefslogtreecommitdiff
path: root/drivers/phy/phy-twl4030-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/phy-twl4030-usb.c')
-rw-r--r--drivers/phy/phy-twl4030-usb.c220
1 files changed, 106 insertions, 114 deletions
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index e1a6623d4696..7b04befd5271 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -28,12 +28,12 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
@@ -154,7 +154,7 @@ struct twl4030_usb {
struct regulator *usb3v1;
/* for vbus reporting with irqs disabled */
- spinlock_t lock;
+ struct mutex lock;
/* pin configuration */
enum twl4030_usb_mode usb_mode;
@@ -162,8 +162,6 @@ struct twl4030_usb {
int irq;
enum omap_musb_vbus_id_status linkstat;
bool vbus_supplied;
- u8 asleep;
- bool irq_enabled;
struct delayed_work id_workaround_work;
};
@@ -383,86 +381,84 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
}
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+static int twl4030_usb_runtime_suspend(struct device *dev)
{
- int ret;
-
- if (on) {
- ret = regulator_enable(twl->usb3v1);
- if (ret)
- dev_err(twl->dev, "Failed to enable usb3v1\n");
-
- ret = regulator_enable(twl->usb1v8);
- if (ret)
- dev_err(twl->dev, "Failed to enable usb1v8\n");
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
- /*
- * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
- * in twl4030) resets the VUSB_DEDICATED2 register. This reset
- * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
- * SLEEP. We work around this by clearing the bit after usv3v1
- * is re-activated. This ensures that VUSB3V1 is really active.
- */
- twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+ dev_dbg(twl->dev, "%s\n", __func__);
+ if (pm_runtime_suspended(dev))
+ return 0;
- ret = regulator_enable(twl->usb1v5);
- if (ret)
- dev_err(twl->dev, "Failed to enable usb1v5\n");
+ __twl4030_phy_power(twl, 0);
+ regulator_disable(twl->usb1v5);
+ regulator_disable(twl->usb1v8);
+ regulator_disable(twl->usb3v1);
- __twl4030_phy_power(twl, 1);
- twl4030_usb_write(twl, PHY_CLK_CTRL,
- twl4030_usb_read(twl, PHY_CLK_CTRL) |
- (PHY_CLK_CTRL_CLOCKGATING_EN |
- PHY_CLK_CTRL_CLK32K_EN));
- } else {
- __twl4030_phy_power(twl, 0);
- regulator_disable(twl->usb1v5);
- regulator_disable(twl->usb1v8);
- regulator_disable(twl->usb3v1);
- }
+ return 0;
}
-static int twl4030_phy_power_off(struct phy *phy)
+static int twl4030_usb_runtime_resume(struct device *dev)
{
- struct twl4030_usb *twl = phy_get_drvdata(phy);
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+ int res;
- if (twl->asleep)
+ dev_dbg(twl->dev, "%s\n", __func__);
+ if (pm_runtime_active(dev))
return 0;
- twl4030_phy_power(twl, 0);
- twl->asleep = 1;
- dev_dbg(twl->dev, "%s\n", __func__);
+ res = regulator_enable(twl->usb3v1);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb3v1\n");
+
+ res = regulator_enable(twl->usb1v8);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb1v8\n");
+
+ /*
+ * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+ * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+ * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+ * SLEEP. We work around this by clearing the bit after usv3v1
+ * is re-activated. This ensures that VUSB3V1 is really active.
+ */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+
+ res = regulator_enable(twl->usb1v5);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb1v5\n");
+
+ __twl4030_phy_power(twl, 1);
+ twl4030_usb_write(twl, PHY_CLK_CTRL,
+ twl4030_usb_read(twl, PHY_CLK_CTRL) |
+ (PHY_CLK_CTRL_CLOCKGATING_EN |
+ PHY_CLK_CTRL_CLK32K_EN));
+
return 0;
}
-static void __twl4030_phy_power_on(struct twl4030_usb *twl)
+static int twl4030_phy_power_off(struct phy *phy)
{
- twl4030_phy_power(twl, 1);
- twl4030_i2c_access(twl, 1);
- twl4030_usb_set_mode(twl, twl->usb_mode);
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(twl, 0);
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
+ return 0;
}
static int twl4030_phy_power_on(struct phy *phy)
{
struct twl4030_usb *twl = phy_get_drvdata(phy);
- if (!twl->asleep)
- return 0;
- __twl4030_phy_power_on(twl);
- twl->asleep = 0;
dev_dbg(twl->dev, "%s\n", __func__);
+ pm_runtime_get_sync(twl->dev);
+ twl4030_i2c_access(twl, 1);
+ twl4030_usb_set_mode(twl, twl->usb_mode);
+ if (twl->usb_mode == T2_USB_MODE_ULPI)
+ twl4030_i2c_access(twl, 0);
+ schedule_delayed_work(&twl->id_workaround_work, 0);
- /*
- * XXX When VBUS gets driven after musb goes to A mode,
- * ID_PRES related interrupts no longer arrive, why?
- * Register itself is updated fine though, so we must poll.
- */
- if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
- cancel_delayed_work(&twl->id_workaround_work);
- schedule_delayed_work(&twl->id_workaround_work, HZ);
- }
return 0;
}
@@ -519,13 +515,12 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct twl4030_usb *twl = dev_get_drvdata(dev);
- unsigned long flags;
int ret = -EINVAL;
- spin_lock_irqsave(&twl->lock, flags);
+ mutex_lock(&twl->lock);
ret = sprintf(buf, "%s\n",
twl->vbus_supplied ? "on" : "off");
- spin_unlock_irqrestore(&twl->lock, flags);
+ mutex_unlock(&twl->lock);
return ret;
}
@@ -539,12 +534,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
status = twl4030_usb_linkstat(twl);
- spin_lock_irq(&twl->lock);
+ mutex_lock(&twl->lock);
if (status >= 0 && status != twl->linkstat) {
twl->linkstat = status;
status_changed = true;
}
- spin_unlock_irq(&twl->lock);
+ mutex_unlock(&twl->lock);
if (status_changed) {
/* FIXME add a set_power() method so that B-devices can
@@ -558,9 +553,27 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
+ if ((status == OMAP_MUSB_VBUS_VALID) ||
+ (status == OMAP_MUSB_ID_GROUND)) {
+ if (pm_runtime_suspended(twl->dev))
+ pm_runtime_get_sync(twl->dev);
+ } else {
+ if (pm_runtime_active(twl->dev)) {
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+ }
+ }
omap_musb_mailbox(status);
}
- sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ /* don't schedule during sleep - irq works right then */
+ if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
+ cancel_delayed_work(&twl->id_workaround_work);
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
+ }
+
+ if (irq)
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
return IRQ_HANDLED;
}
@@ -569,52 +582,19 @@ static void twl4030_id_workaround_work(struct work_struct *work)
{
struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
id_workaround_work.work);
- enum omap_musb_vbus_id_status status;
- bool status_changed = false;
-
- status = twl4030_usb_linkstat(twl);
-
- spin_lock_irq(&twl->lock);
- if (status >= 0 && status != twl->linkstat) {
- twl->linkstat = status;
- status_changed = true;
- }
- spin_unlock_irq(&twl->lock);
- if (status_changed) {
- dev_dbg(twl->dev, "handle missing status change to %d\n",
- status);
- omap_musb_mailbox(status);
- }
-
- /* don't schedule during sleep - irq works right then */
- if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
- cancel_delayed_work(&twl->id_workaround_work);
- schedule_delayed_work(&twl->id_workaround_work, HZ);
- }
+ twl4030_usb_irq(0, twl);
}
static int twl4030_phy_init(struct phy *phy)
{
struct twl4030_usb *twl = phy_get_drvdata(phy);
- enum omap_musb_vbus_id_status status;
-
- /*
- * Start in sleep state, we'll get called through set_suspend()
- * callback when musb is runtime resumed and it's time to start.
- */
- __twl4030_phy_power(twl, 0);
- twl->asleep = 1;
- status = twl4030_usb_linkstat(twl);
- twl->linkstat = status;
-
- if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) {
- omap_musb_mailbox(twl->linkstat);
- twl4030_phy_power_on(phy);
- }
+ pm_runtime_get_sync(twl->dev);
+ schedule_delayed_work(&twl->id_workaround_work, 0);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
- sysfs_notify(&twl->dev->kobj, NULL, "vbus");
return 0;
}
@@ -650,6 +630,11 @@ static const struct phy_ops ops = {
.owner = THIS_MODULE,
};
+static const struct dev_pm_ops twl4030_usb_pm_ops = {
+ SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
+ twl4030_usb_runtime_resume, NULL)
+};
+
static int twl4030_usb_probe(struct platform_device *pdev)
{
struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
@@ -683,7 +668,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
twl->vbus_supplied = false;
- twl->asleep = 1;
+ twl->linkstat = -EINVAL;
twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->phy.dev = twl->dev;
@@ -708,8 +693,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
- /* init spinlock for workqueue */
- spin_lock_init(&twl->lock);
+ /* init mutex for workqueue */
+ mutex_init(&twl->lock);
INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
@@ -726,6 +711,11 @@ static int twl4030_usb_probe(struct platform_device *pdev)
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*
@@ -734,7 +724,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
* set_host() and/or set_peripheral() ... OTG_capable boards
* need both handles, otherwise just one suffices.
*/
- twl->irq_enabled = true;
status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
twl4030_usb_irq, IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
@@ -744,6 +733,9 @@ static int twl4030_usb_probe(struct platform_device *pdev)
return status;
}
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
}
@@ -753,6 +745,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
struct twl4030_usb *twl = platform_get_drvdata(pdev);
int val;
+ pm_runtime_get_sync(twl->dev);
cancel_delayed_work(&twl->id_workaround_work);
device_remove_file(twl->dev, &dev_attr_vbus);
@@ -772,9 +765,8 @@ static int twl4030_usb_remove(struct platform_device *pdev)
/* disable complete OTG block */
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
-
- if (!twl->asleep)
- twl4030_phy_power(twl, 0);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put(twl->dev);
return 0;
}
@@ -792,7 +784,7 @@ static struct platform_driver twl4030_usb_driver = {
.remove = twl4030_usb_remove,
.driver = {
.name = "twl4030_usb",
- .owner = THIS_MODULE,
+ .pm = &twl4030_usb_pm_ops,
.of_match_table = of_match_ptr(twl4030_usb_id_table),
},
};