diff options
Diffstat (limited to 'drivers/phy/qualcomm')
| -rw-r--r-- | drivers/phy/qualcomm/Kconfig | 34 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/Makefile | 4 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c | 571 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 510 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.h | 7 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 85 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-i.h | 131 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 172 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h | 168 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 226 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h | 226 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-ufs.c | 648 |
13 files changed, 1175 insertions, 1610 deletions
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index ca9ce7e84a5c..928db510b86c 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -59,30 +59,6 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM - select GENERIC_PHY - help - Support for UFS PHY on QCOM chipsets. - -if PHY_QCOM_UFS - -config PHY_QCOM_UFS_14NM - tristate - default PHY_QCOM_UFS - help - Support for 14nm UFS QMP phy present on QCOM chipsets. - -config PHY_QCOM_UFS_20NM - tristate - default PHY_QCOM_UFS - depends on BROKEN - help - Support for 20nm UFS QMP phy present on QCOM chipsets. - -endif - config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS @@ -128,3 +104,13 @@ config PHY_QCOM_USB_SS help Enable this to support the Super-Speed USB transceiver on various Qualcomm chipsets. + +config PHY_QCOM_IPQ806X_USB + tristate "Qualcomm IPQ806x DWC3 USB PHY driver" + depends on HAS_IOMEM + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for the Synopsis PHYs present inside the + Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports + both HS and SS PHY controllers. diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 86fb32efab79..47acbd7daa3a 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -6,11 +6,9 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o -obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o -obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c new file mode 100644 index 000000000000..71f257b4a7f5 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c @@ -0,0 +1,571 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +/* USB QSCRATCH Hardware registers */ +#define QSCRATCH_GENERAL_CFG (0x08) +#define HSUSB_PHY_CTRL_REG (0x10) + +/* PHY_CTRL_REG */ +#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) +#define HSUSB_CTRL_USB2_SUSPEND BIT(23) +#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) +#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) +#define HSUSB_CTRL_USE_CLKCORE BIT(18) +#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) +#define HSUSB_CTRL_COMMONONN BIT(11) +#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) +#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) +#define HSUSB_CTRL_CLAMP_EN BIT(7) +#define HSUSB_CTRL_RETENABLEN BIT(1) +#define HSUSB_CTRL_POR BIT(0) + +/* QSCRATCH_GENERAL_CFG */ +#define HSUSB_GCFG_XHCI_REV BIT(2) + +/* USB QSCRATCH Hardware registers */ +#define SSUSB_PHY_CTRL_REG (0x00) +#define SSUSB_PHY_PARAM_CTRL_1 (0x04) +#define SSUSB_PHY_PARAM_CTRL_2 (0x08) +#define CR_PROTOCOL_DATA_IN_REG (0x0c) +#define CR_PROTOCOL_DATA_OUT_REG (0x10) +#define CR_PROTOCOL_CAP_ADDR_REG (0x14) +#define CR_PROTOCOL_CAP_DATA_REG (0x18) +#define CR_PROTOCOL_READ_REG (0x1c) +#define CR_PROTOCOL_WRITE_REG (0x20) + +/* PHY_CTRL_REG */ +#define SSUSB_CTRL_REF_USE_PAD BIT(28) +#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) +#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) +#define SSUSB_CTRL_SS_PHY_EN BIT(8) +#define SSUSB_CTRL_SS_PHY_RESET BIT(7) + +/* SSPHY control registers - Does this need 0x30? */ +#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane)) +#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane)) + +/* SSPHY SoC version specific values */ +#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ +/* Override value for transmit preemphasis */ +#define SSPHY_TX_DEEMPH_3_5DB 23 +/* Override value for mpll */ +#define SSPHY_MPLL_VALUE 0 + +/* QSCRATCH PHY_PARAM_CTRL1 fields */ +#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19) +#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13) +#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7) +#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2) + +#define PHY_PARAM_CTRL1_MASK \ + (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ + PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ + PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ + PHY_PARAM_CTRL1_LOS_BIAS_MASK) + +#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ + (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) +#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ + (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) +#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ + (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) +#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ + (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) + +/* RX OVRD IN HI bits */ +#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) +#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) +#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) +#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7) +#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8) +#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) +#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) +#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) +#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2) +#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) +#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0) + +/* TX OVRD DRV LO register bits */ +#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0) +#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6) +#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7) +#define TX_OVRD_DRV_LO_EN BIT(14) + +/* MPLL bits */ +#define SSPHY_MPLL_MASK GENMASK(8, 5) +#define SSPHY_MPLL(x) ((x) << 5) + +/* SS CAP register bits */ +#define SS_CR_CAP_ADDR_REG BIT(0) +#define SS_CR_CAP_DATA_REG BIT(0) +#define SS_CR_READ_REG BIT(0) +#define SS_CR_WRITE_REG BIT(0) + +struct usb_phy { + void __iomem *base; + struct device *dev; + struct clk *xo_clk; + struct clk *ref_clk; + u32 rx_eq; + u32 tx_deamp_3_5db; + u32 mpll; +}; + +struct phy_drvdata { + struct phy_ops ops; + u32 clk_rate; +}; + +/** + * Write register and read back masked value to confirm it is written + * + * @base - QCOM DWC3 PHY base virtual address. + * @offset - register offset. + * @mask - register bitmask specifying what should be updated + * @val - value to write. + */ +static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3, + u32 offset, + const u32 mask, u32 val) +{ + u32 write_val, tmp = readl(phy_dwc3->base + offset); + + tmp &= ~mask; /* retain other bits */ + write_val = tmp | val; + + writel(write_val, phy_dwc3->base + offset); + + /* Read back to see if val was written */ + tmp = readl(phy_dwc3->base + offset); + tmp &= mask; /* clear other bits */ + + if (tmp != val) + dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset); +} + +static int wait_for_latch(void __iomem *addr) +{ + u32 retry = 10; + + while (true) { + if (!readl(addr)) + break; + + if (--retry == 0) + return -ETIMEDOUT; + + usleep_range(10, 20); + } + + return 0; +} + +/** + * Write SSPHY register + * + * @base - QCOM DWC3 PHY base virtual address. + * @addr - SSPHY address to write. + * @val - value to write. + */ +static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3, + u32 addr, u32 val) +{ + int ret; + + writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); + writel(SS_CR_CAP_ADDR_REG, + phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); + if (ret) + goto err_wait; + + writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); + writel(SS_CR_CAP_DATA_REG, + phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); + if (ret) + goto err_wait; + + writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG); + +err_wait: + if (ret) + dev_err(phy_dwc3->dev, "timeout waiting for latch\n"); + return ret; +} + +/** + * Read SSPHY register. + * + * @base - QCOM DWC3 PHY base virtual address. + * @addr - SSPHY address to read. + */ +static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3, + u32 addr, u32 *val) +{ + int ret; + + writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); + writel(SS_CR_CAP_ADDR_REG, + phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); + if (ret) + goto err_wait; + + /* + * Due to hardware bug, first read of SSPHY register might be + * incorrect. Hence as workaround, SW should perform SSPHY register + * read twice, but use only second read and ignore first read. + */ + writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG); + if (ret) + goto err_wait; + + /* throwaway read */ + readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG); + + writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG); + + ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG); + if (ret) + goto err_wait; + + *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG); + +err_wait: + return ret; +} + +static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy) +{ + struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); + int ret; + u32 val; + + ret = clk_prepare_enable(phy_dwc3->xo_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(phy_dwc3->ref_clk); + if (ret) { + clk_disable_unprepare(phy_dwc3->xo_clk); + return ret; + } + + /* + * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel + * enable clamping, and disable RETENTION (power-on default is ENABLED) + */ + val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | + HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | + HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | + HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | + HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; + + /* use core clock if external reference is not present */ + if (!phy_dwc3->xo_clk) + val |= HSUSB_CTRL_USE_CLKCORE; + + writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG); + usleep_range(2000, 2200); + + /* Disable (bypass) VBUS and ID filters */ + writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG); + + return 0; +} + +static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy) +{ + struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); + + clk_disable_unprepare(phy_dwc3->ref_clk); + clk_disable_unprepare(phy_dwc3->xo_clk); + + return 0; +} + +static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy) +{ + struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); + int ret; + u32 data; + + ret = clk_prepare_enable(phy_dwc3->xo_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(phy_dwc3->ref_clk); + if (ret) { + clk_disable_unprepare(phy_dwc3->xo_clk); + return ret; + } + + /* reset phy */ + data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); + writel(data | SSUSB_CTRL_SS_PHY_RESET, + phy_dwc3->base + SSUSB_PHY_CTRL_REG); + usleep_range(2000, 2200); + writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); + + /* clear REF_PAD if we don't have XO clk */ + if (!phy_dwc3->xo_clk) + data &= ~SSUSB_CTRL_REF_USE_PAD; + else + data |= SSUSB_CTRL_REF_USE_PAD; + + writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); + + /* wait for ref clk to become stable, this can take up to 30ms */ + msleep(30); + + data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; + writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); + + /* + * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates + * in HS mode instead of SS mode. Workaround it by asserting + * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode + */ + ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data); + if (ret) + goto err_phy_trans; + + data |= (1 << 7); + ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data); + if (ret) + goto err_phy_trans; + + ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data); + if (ret) + goto err_phy_trans; + + data &= ~0xff0; + data |= 0x20; + ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data); + if (ret) + goto err_phy_trans; + + /* + * Fix RX Equalization setting as follows + * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 + * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 + * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version + * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 + */ + ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); + if (ret) + goto err_phy_trans; + + data &= ~RX_OVRD_IN_HI_RX_EQ_EN; + data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; + data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; + data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq); + data |= RX_OVRD_IN_HI_RX_EQ_OVRD; + ret = usb_ss_write_phycreg(phy_dwc3, + SSPHY_CTRL_RX_OVRD_IN_HI(0), data); + if (ret) + goto err_phy_trans; + + /* + * Set EQ and TX launch amplitudes as follows + * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version + * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 + * LANE0.TX_OVRD_DRV_LO.EN set to 1. + */ + ret = usb_ss_read_phycreg(phy_dwc3, + SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); + if (ret) + goto err_phy_trans; + + data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; + data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db); + data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; + data |= 0x6E; + data |= TX_OVRD_DRV_LO_EN; + ret = usb_ss_write_phycreg(phy_dwc3, + SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); + if (ret) + goto err_phy_trans; + + data = 0; + data &= ~SSPHY_MPLL_MASK; + data |= SSPHY_MPLL(phy_dwc3->mpll); + usb_ss_write_phycreg(phy_dwc3, 0x30, data); + + /* + * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows + * TX_FULL_SWING [26:20] amplitude to 110 + * TX_DEEMPH_6DB [19:14] to 32 + * TX_DEEMPH_3_5DB [13:8] set based on SoC version + * LOS_BIAS [7:3] to 9 + */ + data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1); + + data &= ~PHY_PARAM_CTRL1_MASK; + + data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | + PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | + PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | + PHY_PARAM_CTRL1_LOS_BIAS(0x9); + + usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, + PHY_PARAM_CTRL1_MASK, data); + +err_phy_trans: + return ret; +} + +static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy) +{ + struct usb_phy *phy_dwc3 = phy_get_drvdata(phy); + + /* Sequence to put SSPHY in low power state: + * 1. Clear REF_PHY_EN in PHY_CTRL_REG + * 2. Clear REF_USE_PAD in PHY_CTRL_REG + * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention + */ + usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, + SSUSB_CTRL_SS_PHY_EN, 0x0); + usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, + SSUSB_CTRL_REF_USE_PAD, 0x0); + usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, + SSUSB_CTRL_TEST_POWERDOWN, 0x0); + + clk_disable_unprepare(phy_dwc3->ref_clk); + clk_disable_unprepare(phy_dwc3->xo_clk); + + return 0; +} + +static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = { + .ops = { + .init = qcom_ipq806x_usb_hs_phy_init, + .exit = qcom_ipq806x_usb_hs_phy_exit, + .owner = THIS_MODULE, + }, + .clk_rate = 60000000, +}; + +static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = { + .ops = { + .init = qcom_ipq806x_usb_ss_phy_init, + .exit = qcom_ipq806x_usb_ss_phy_exit, + .owner = THIS_MODULE, + }, + .clk_rate = 125000000, +}; + +static const struct of_device_id qcom_ipq806x_usb_phy_table[] = { + { .compatible = "qcom,ipq806x-usb-phy-hs", + .data = &qcom_ipq806x_usb_hs_drvdata }, + { .compatible = "qcom,ipq806x-usb-phy-ss", + .data = &qcom_ipq806x_usb_ss_drvdata }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table); + +static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + resource_size_t size; + struct phy *generic_phy; + struct usb_phy *phy_dwc3; + const struct phy_drvdata *data; + struct phy_provider *phy_provider; + + phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); + if (!phy_dwc3) + return -ENOMEM; + + data = of_device_get_match_data(&pdev->dev); + + phy_dwc3->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + size = resource_size(res); + phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size); + + if (IS_ERR(phy_dwc3->base)) { + dev_err(phy_dwc3->dev, "failed to map reg\n"); + return PTR_ERR(phy_dwc3->base); + } + + phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); + if (IS_ERR(phy_dwc3->ref_clk)) { + dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); + return PTR_ERR(phy_dwc3->ref_clk); + } + + clk_set_rate(phy_dwc3->ref_clk, data->clk_rate); + + phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); + if (IS_ERR(phy_dwc3->xo_clk)) { + dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); + phy_dwc3->xo_clk = NULL; + } + + /* Parse device node to probe HSIO settings */ + if (device_property_read_u32(&pdev->dev, "qcom,rx-eq", + &phy_dwc3->rx_eq)) + phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; + + if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db", + &phy_dwc3->tx_deamp_3_5db)) + phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; + + if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll)) + phy_dwc3->mpll = SSPHY_MPLL_VALUE; + + generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops); + + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy_dwc3); + platform_set_drvdata(pdev, phy_dwc3); + + phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, + of_phy_simple_xlate); + + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static struct platform_driver qcom_ipq806x_usb_phy_driver = { + .probe = qcom_ipq806x_usb_phy_probe, + .driver = { + .name = "qcom-ipq806x-usb-phy", + .owner = THIS_MODULE, + .of_match_table = qcom_ipq806x_usb_phy_table, + }, +}; + +module_platform_driver(qcom_ipq806x_usb_phy_driver); + +MODULE_ALIAS("platform:phy-qcom-ipq806x-usb"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); +MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>"); +MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e91040af3394..562053ce9455 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -82,20 +82,34 @@ struct qmp_phy_init_tbl { * register part of layout ? * if yes, then offset gives index in the reg-layout */ - int in_layout; + bool in_layout; + /* + * mask of lanes for which this register is written + * for cases when second lane needs different values + */ + u8 lane_mask; }; #define QMP_PHY_INIT_CFG(o, v) \ { \ .offset = o, \ .val = v, \ + .lane_mask = 0xff, \ } #define QMP_PHY_INIT_CFG_L(o, v) \ { \ .offset = o, \ .val = v, \ - .in_layout = 1, \ + .in_layout = true, \ + .lane_mask = 0xff, \ + } + +#define QMP_PHY_INIT_CFG_LANE(o, v, l) \ + { \ + .offset = o, \ + .val = v, \ + .lane_mask = l, \ } /* set of registers with offsets different per-PHY */ @@ -185,6 +199,17 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_START_CTRL] = 0x44, [QPHY_PCS_STATUS] = 0x14, [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314, +}; + +static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x44, + [QPHY_PCS_STATUS] = 0x14, + [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614, }; static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { @@ -198,6 +223,81 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET, }; +static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06), + /* PLL and Loop filter settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), + /* SSC settings */ + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde), + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16), + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0), +}; + +static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f), +}; + static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10), @@ -1399,6 +1499,250 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), }; +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f), +}; + +static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -1567,6 +1911,11 @@ static const char * const qmp_v4_phy_clk_l[] = { "aux", "ref_clk_src", "ref", "com_aux", }; +/* the primary usb3 phy on sm8250 doesn't have a ref clock */ +static const char * const qmp_v4_sm8250_usbphy_clk_l[] = { + "aux", "ref_clk_src", "com_aux" +}; + static const char * const sdm845_ufs_phy_clk_l[] = { "ref", "ref_aux", }; @@ -1593,6 +1942,30 @@ static const char * const qmp_phy_vreg_l[] = { "vdda-phy", "vdda-pll", }; +static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = ipq8074_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl), + .tx_tbl = msm8996_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl), + .rx_tbl = ipq8074_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl), + .pcs_tbl = ipq8074_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl), + .clk_list = msm8996_phy_clk_l, + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, +}; + static const struct qmp_phy_cfg msm8996_pciephy_cfg = { .type = PHY_TYPE_PCIE, .nlanes = 3, @@ -1986,10 +2359,98 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { .is_dual_lane_phy = true, }; -static void qcom_qmp_phy_configure(void __iomem *base, - const unsigned int *regs, - const struct qmp_phy_init_tbl tbl[], - int num) +static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), + .tx_tbl = sm8150_usb3_uniphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl), + .rx_tbl = sm8150_usb3_uniphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl), + .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl), + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3_uniphy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + +static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = sm8150_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), + .tx_tbl = sm8250_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl), + .rx_tbl = sm8250_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl), + .pcs_tbl = sm8250_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl), + .clk_list = qmp_v4_sm8250_usbphy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, + + .has_phy_dp_com_ctrl = true, + .is_dual_lane_phy = true, +}; + +static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl), + .tx_tbl = sm8250_usb3_uniphy_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl), + .rx_tbl = sm8250_usb3_uniphy_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl), + .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl), + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3_uniphy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + + .has_pwrdn_delay = true, + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, +}; + +static void qcom_qmp_phy_configure_lane(void __iomem *base, + const unsigned int *regs, + const struct qmp_phy_init_tbl tbl[], + int num, + u8 lane_mask) { int i; const struct qmp_phy_init_tbl *t = tbl; @@ -1998,6 +2459,9 @@ static void qcom_qmp_phy_configure(void __iomem *base, return; for (i = 0; i < num; i++, t++) { + if (!(t->lane_mask & lane_mask)) + continue; + if (t->in_layout) writel(t->val, base + regs[t->offset]); else @@ -2005,6 +2469,14 @@ static void qcom_qmp_phy_configure(void __iomem *base, } } +static void qcom_qmp_phy_configure(void __iomem *base, + const unsigned int *regs, + const struct qmp_phy_init_tbl tbl[], + int num) +{ + qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff); +} + static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) { struct qcom_qmp *qmp = qphy->qmp; @@ -2219,16 +2691,18 @@ static int qcom_qmp_phy_enable(struct phy *phy) } /* Tx, Rx, and PCS configurations */ - qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure_lane(tx, cfg->regs, + cfg->tx_tbl, cfg->tx_tbl_num, 1); /* Configuration for other LANE for USB-DP combo PHY */ if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(qphy->tx2, cfg->regs, - cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs, + cfg->tx_tbl, cfg->tx_tbl_num, 2); - qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure_lane(rx, cfg->regs, + cfg->rx_tbl, cfg->rx_tbl_num, 1); if (cfg->is_dual_lane_phy) - qcom_qmp_phy_configure(qphy->rx2, cfg->regs, - cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs, + cfg->rx_tbl, cfg->rx_tbl_num, 2); qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); ret = reset_control_deassert(qmp->ufs_reset); @@ -2699,6 +3173,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) static const struct of_device_id qcom_qmp_phy_of_match_table[] = { { + .compatible = "qcom,ipq8074-qmp-usb3-phy", + .data = &ipq8074_usb3phy_cfg, + }, { .compatible = "qcom,msm8996-qmp-pcie-phy", .data = &msm8996_pciephy_cfg, }, { @@ -2746,6 +3223,15 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,sm8150-qmp-usb3-phy", .data = &sm8150_usb3phy_cfg, + }, { + .compatible = "qcom,sm8150-qmp-usb3-uni-phy", + .data = &sm8150_usb3_uniphy_cfg, + }, { + .compatible = "qcom,sm8250-qmp-usb3-phy", + .data = &sm8250_usb3phy_cfg, + }, { + .compatible = "qcom,sm8250-qmp-usb3-uni-phy", + .data = &sm8250_usb3_uniphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6d017a0c0c8d..4277f592684b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -363,7 +363,10 @@ /* Only for QMP V4 PHY - TX registers */ #define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34 #define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38 +#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c +#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40 #define QSERDES_V4_TX_LANE_MODE_1 0x84 +#define QSERDES_V4_TX_LANE_MODE_2 0x88 #define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8 #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC @@ -709,6 +712,10 @@ #define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354 #define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358 +/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */ +#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x618 +#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x638 + /* Only for QMP V4 PHY - PCS_MISC registers */ #define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00 #define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04 diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 393011a05b48..557547dabfd5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -810,6 +810,9 @@ static const struct phy_ops qusb2_phy_gen_ops = { static const struct of_device_id qusb2_phy_of_match_table[] = { { + .compatible = "qcom,ipq8074-qusb2-phy", + .data = &msm8996_phy_cfg, + }, { .compatible = "qcom,msm8996-qusb2-phy", .data = &msm8996_phy_cfg, }, { diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 4d74045271eb..ae4bac024c7b 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -77,6 +77,7 @@ static const char * const qcom_snps_hsphy_vreg_names[] = { * @phy_reset: phy reset control * @vregs: regulator supplies bulk data * @phy_initialized: if PHY has been initialized correctly + * @mode: contains the current mode the PHY is in */ struct qcom_snps_hsphy { struct phy *phy; @@ -88,6 +89,7 @@ struct qcom_snps_hsphy { struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS]; bool phy_initialized; + enum phy_mode mode; }; static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, @@ -104,6 +106,72 @@ static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, readl_relaxed(base + offset); } +static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy) +{ + dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n"); + + if (hsphy->mode == PHY_MODE_USB_HOST) { + /* Enable auto-resume to meet remote wakeup timing */ + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_AUTO_RESUME, + USB2_AUTO_RESUME); + usleep_range(500, 1000); + qcom_snps_hsphy_write_mask(hsphy->base, + USB2_PHY_USB_PHY_HS_PHY_CTRL2, + 0, USB2_AUTO_RESUME); + } + + clk_disable_unprepare(hsphy->cfg_ahb_clk); + return 0; +} + +static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy) +{ + int ret; + + dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n"); + + ret = clk_prepare_enable(hsphy->cfg_ahb_clk); + if (ret) { + dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n"); + return ret; + } + + return 0; +} + +static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev) +{ + struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev); + + if (!hsphy->phy_initialized) + return 0; + + qcom_snps_hsphy_suspend(hsphy); + return 0; +} + +static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev) +{ + struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev); + + if (!hsphy->phy_initialized) + return 0; + + qcom_snps_hsphy_resume(hsphy); + return 0; +} + +static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode, + int submode) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + + hsphy->mode = mode; + return 0; +} + static int qcom_snps_hsphy_init(struct phy *phy) { struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); @@ -201,6 +269,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy) static const struct phy_ops qcom_snps_hsphy_gen_ops = { .init = qcom_snps_hsphy_init, .exit = qcom_snps_hsphy_exit, + .set_mode = qcom_snps_hsphy_set_mode, .owner = THIS_MODULE, }; @@ -212,6 +281,11 @@ static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table); +static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = { + SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend, + qcom_snps_hsphy_runtime_resume, NULL) +}; + static int qcom_snps_hsphy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -255,6 +329,14 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev) return ret; } + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Prevent runtime pm from being ON by default. Users can enable + * it using power/control in sysfs. + */ + pm_runtime_forbid(dev); + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops); if (IS_ERR(generic_phy)) { ret = PTR_ERR(generic_phy); @@ -269,6 +351,8 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) dev_dbg(dev, "Registered Qcom-SNPS HS phy\n"); + else + pm_runtime_disable(dev); return PTR_ERR_OR_ZERO(phy_provider); } @@ -277,6 +361,7 @@ static struct platform_driver qcom_snps_hsphy_driver = { .probe = qcom_snps_hsphy_probe, .driver = { .name = "qcom-snps-hs-femto-v2-phy", + .pm = &qcom_snps_hsphy_pm_ops, .of_match_table = qcom_snps_hsphy_of_match_table, }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h deleted file mode 100644 index 9bf973a0d8c3..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h +++ /dev/null @@ -1,131 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#ifndef UFS_QCOM_PHY_I_H_ -#define UFS_QCOM_PHY_I_H_ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/phy/phy.h> -#include <linux/regulator/consumer.h> -#include <linux/reset.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/iopoll.h> - -#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \ - { \ - .reg_offset = reg, \ - .cfg_value = val, \ - } - -#define UFS_QCOM_PHY_NAME_LEN 30 - -enum { - MASK_SERDES_START = 0x1, - MASK_PCS_READY = 0x1, -}; - -enum { - OFFSET_SERDES_START = 0x0, -}; - -struct ufs_qcom_phy_stored_attributes { - u32 att; - u32 value; -}; - - -struct ufs_qcom_phy_calibration { - u32 reg_offset; - u32 cfg_value; -}; - -struct ufs_qcom_phy_vreg { - const char *name; - struct regulator *reg; - int max_uA; - int min_uV; - int max_uV; - bool enabled; -}; - -struct ufs_qcom_phy { - struct list_head list; - struct device *dev; - void __iomem *mmio; - void __iomem *dev_ref_clk_ctrl_mmio; - struct clk *tx_iface_clk; - struct clk *rx_iface_clk; - bool is_iface_clk_enabled; - struct clk *ref_clk_src; - struct clk *ref_clk_parent; - struct clk *ref_clk; - bool is_ref_clk_enabled; - bool is_dev_ref_clk_enabled; - struct ufs_qcom_phy_vreg vdda_pll; - struct ufs_qcom_phy_vreg vdda_phy; - struct ufs_qcom_phy_vreg vddp_ref_clk; - unsigned int quirks; - - /* - * If UFS link is put into Hibern8 and if UFS PHY analog hardware is - * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8 - * exit might fail even after powering on UFS PHY analog hardware. - * Enabling this quirk will help to solve above issue by doing - * custom PHY settings just before PHY analog power collapse. - */ - #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0) - - u8 host_ctrl_rev_major; - u16 host_ctrl_rev_minor; - u16 host_ctrl_rev_step; - - char name[UFS_QCOM_PHY_NAME_LEN]; - struct ufs_qcom_phy_calibration *cached_regs; - int cached_regs_table_size; - struct ufs_qcom_phy_specific_ops *phy_spec_ops; - - enum phy_mode mode; - struct reset_control *ufs_reset; -}; - -/** - * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a - * specific implementation per phy. Each UFS phy, should implement - * those functions according to its spec and requirements - * @start_serdes: pointer to a function that starts the serdes - * @is_physical_coding_sublayer_ready: pointer to a function that - * checks pcs readiness. returns 0 for success and non-zero for error. - * @set_tx_lane_enable: pointer to a function that enable tx lanes - * @power_control: pointer to a function that controls analog rail of phy - * and writes to QSERDES_RX_SIGDET_CNTRL attribute - */ -struct ufs_qcom_phy_specific_ops { - int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B); - void (*start_serdes)(struct ufs_qcom_phy *phy); - int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); - void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); - void (*power_control)(struct ufs_qcom_phy *phy, bool val); -}; - -struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); -int ufs_qcom_phy_power_on(struct phy *generic_phy); -int ufs_qcom_phy_power_off(struct phy *generic_phy); -int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common); -int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common); -int ufs_qcom_phy_remove(struct phy *generic_phy, - struct ufs_qcom_phy *ufs_qcom_phy); -struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, - struct ufs_qcom_phy *common_cfg, - const struct phy_ops *ufs_qcom_phy_gen_ops, - struct ufs_qcom_phy_specific_ops *phy_spec_ops); -int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A, - struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B, - bool is_rate_B); -#endif diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c deleted file mode 100644 index 54b355bfc24c..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#include "phy-qcom-ufs-qmp-14nm.h" - -#define UFS_PHY_NAME "ufs_phy_qmp_14nm" -#define UFS_PHY_VDDA_PHY_UV (925000) - -static -int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - bool is_rate_B) -{ - int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A); - int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); - int err; - - err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A, - tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B); - - if (err) - dev_err(ufs_qcom_phy->dev, - "%s: ufs_qcom_phy_calibrate() failed %d\n", - __func__, err); - return err; -} - -static -void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) -{ - phy_common->quirks = - UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; -} - -static -int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, - enum phy_mode mode, int submode) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - - phy_common->mode = PHY_MODE_INVALID; - - if (mode > 0) - phy_common->mode = mode; - - return 0; -} - -static -void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) -{ - writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); - /* - * Before any transactions involving PHY, ensure PHY knows - * that it's analog rail is powered ON (or OFF). - */ - mb(); -} - -static inline -void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) -{ - /* - * 14nm PHY does not have TX_LANE_ENABLE register. - * Implement this function so as not to propagate error to caller. - */ -} - -static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy) -{ - u32 tmp; - - tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); - tmp &= ~MASK_SERDES_START; - tmp |= (1 << OFFSET_SERDES_START); - writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); - /* Ensure register value is committed */ - mb(); -} - -static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) -{ - int err = 0; - u32 val; - - err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, - val, (val & MASK_PCS_READY), 10, 1000000); - if (err) - dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", - __func__, err); - return err; -} - -static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { - .power_on = ufs_qcom_phy_power_on, - .power_off = ufs_qcom_phy_power_off, - .set_mode = ufs_qcom_phy_qmp_14nm_set_mode, - .owner = THIS_MODULE, -}; - -static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { - .calibrate = ufs_qcom_phy_qmp_14nm_phy_calibrate, - .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, - .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, - .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, - .power_control = ufs_qcom_phy_qmp_14nm_power_control, -}; - -static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct ufs_qcom_phy_qmp_14nm *phy; - struct ufs_qcom_phy *phy_common; - int err = 0; - - phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - err = -ENOMEM; - goto out; - } - phy_common = &phy->common_cfg; - - generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common, - &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops); - - if (!generic_phy) { - err = -EIO; - goto out; - } - - err = ufs_qcom_phy_init_clks(phy_common); - if (err) - goto out; - - err = ufs_qcom_phy_init_vregulators(phy_common); - if (err) - goto out; - - phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV; - phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV; - - ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common); - - phy_set_drvdata(generic_phy, phy); - - strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name)); - -out: - return err; -} - -static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = { - {.compatible = "qcom,ufs-phy-qmp-14nm"}, - {.compatible = "qcom,msm8996-ufs-phy-qmp-14nm"}, - {}, -}; -MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match); - -static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = { - .probe = ufs_qcom_phy_qmp_14nm_probe, - .driver = { - .of_match_table = ufs_qcom_phy_qmp_14nm_of_match, - .name = "ufs_qcom_phy_qmp_14nm", - }, -}; - -module_platform_driver(ufs_qcom_phy_qmp_14nm_driver); - -MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h deleted file mode 100644 index ceca654b9338..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h +++ /dev/null @@ -1,168 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#ifndef UFS_QCOM_PHY_QMP_14NM_H_ -#define UFS_QCOM_PHY_QMP_14NM_H_ - -#include "phy-qcom-ufs-i.h" - -/* QCOM UFS PHY control registers */ -#define COM_OFF(x) (0x000 + x) -#define PHY_OFF(x) (0xC00 + x) -#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) -#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) - -/* UFS PHY QSERDES COM registers */ -#define QSERDES_COM_BG_TIMER COM_OFF(0x0C) -#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) -#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) -#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) -#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) -#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) -#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) -#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) -#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) -#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) -#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) -#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) -#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) -#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) -#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) -#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) -#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) -#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) -#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) -#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) -#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) -#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) -#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) -#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) -#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) -#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) -#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) -#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) -#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) -#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) -#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) -#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) -#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) -#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) -#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) -#define QSERDES_COM_CLK_SELECT COM_OFF(0x174) -#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) -#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) -#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) -#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) -#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) -#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) - -/* UFS PHY registers */ -#define UFS_PHY_PHY_START PHY_OFF(0x00) -#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) -#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) - -/* UFS PHY TX registers */ -#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) -#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) - -/* UFS PHY RX registers */ -#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) -#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) -#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) -#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) -#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) -#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) -#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) -#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) -#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) -#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) - -/* - * This structure represents the 14nm specific phy. - * common_cfg MUST remain the first field in this structure - * in case extra fields are added. This way, when calling - * get_ufs_qcom_phy() of generic phy, we can extract the - * common phy structure (struct ufs_qcom_phy) out of it - * regardless of the relevant specific phy. - */ -struct ufs_qcom_phy_qmp_14nm { - struct ufs_qcom_phy common_cfg; -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), - - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), - - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), -}; - -#endif diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c deleted file mode 100644 index 3e9d8b71e995..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#include "phy-qcom-ufs-qmp-20nm.h" - -#define UFS_PHY_NAME "ufs_phy_qmp_20nm" - -static -int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - bool is_rate_B) -{ - struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; - int tbl_size_A, tbl_size_B; - u8 major = ufs_qcom_phy->host_ctrl_rev_major; - u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; - u16 step = ufs_qcom_phy->host_ctrl_rev_step; - int err; - - if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { - tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); - tbl_A = phy_cal_table_rate_A_1_2_0; - } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { - tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); - tbl_A = phy_cal_table_rate_A_1_3_0; - } else { - dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", - __func__); - err = -ENODEV; - goto out; - } - - tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); - tbl_B = phy_cal_table_rate_B; - - err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, - tbl_B, tbl_size_B, is_rate_B); - - if (err) - dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", - __func__, err); - -out: - return err; -} - -static -void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) -{ - phy_common->quirks = - UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; -} - -static -int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, - enum phy_mode mode, int submode) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - - phy_common->mode = PHY_MODE_INVALID; - - if (mode > 0) - phy_common->mode = mode; - - return 0; -} - -static -void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) -{ - bool hibern8_exit_after_pwr_collapse = phy->quirks & - UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; - - if (val) { - writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); - /* - * Before any transactions involving PHY, ensure PHY knows - * that it's analog rail is powered ON. - */ - mb(); - - if (hibern8_exit_after_pwr_collapse) { - /* - * Give atleast 1us delay after restoring PHY analog - * power. - */ - usleep_range(1, 2); - writel_relaxed(0x0A, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - writel_relaxed(0x08, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - /* - * Make sure workaround is deactivated before proceeding - * with normal PHY operations. - */ - mb(); - } - } else { - if (hibern8_exit_after_pwr_collapse) { - writel_relaxed(0x0A, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - writel_relaxed(0x02, phy->mmio + - QSERDES_COM_SYSCLK_EN_SEL_TXBAND); - /* - * Make sure that above workaround is activated before - * PHY analog power collapse. - */ - mb(); - } - - writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); - /* - * ensure that PHY knows its PHY analog rail is going - * to be powered down - */ - mb(); - } -} - -static -void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) -{ - writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, - phy->mmio + UFS_PHY_TX_LANE_ENABLE); - mb(); -} - -static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) -{ - u32 tmp; - - tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); - tmp &= ~MASK_SERDES_START; - tmp |= (1 << OFFSET_SERDES_START); - writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); - mb(); -} - -static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) -{ - int err = 0; - u32 val; - - err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, - val, (val & MASK_PCS_READY), 10, 1000000); - if (err) - dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", - __func__, err); - return err; -} - -static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { - .power_on = ufs_qcom_phy_power_on, - .power_off = ufs_qcom_phy_power_off, - .set_mode = ufs_qcom_phy_qmp_20nm_set_mode, - .owner = THIS_MODULE, -}; - -static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { - .calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate, - .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, - .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, - .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, - .power_control = ufs_qcom_phy_qmp_20nm_power_control, -}; - -static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct phy *generic_phy; - struct ufs_qcom_phy_qmp_20nm *phy; - struct ufs_qcom_phy *phy_common; - int err = 0; - - phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - err = -ENOMEM; - goto out; - } - phy_common = &phy->common_cfg; - - generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common, - &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); - - if (!generic_phy) { - err = -EIO; - goto out; - } - - err = ufs_qcom_phy_init_clks(phy_common); - if (err) - goto out; - - err = ufs_qcom_phy_init_vregulators(phy_common); - if (err) - goto out; - - ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); - - phy_set_drvdata(generic_phy, phy); - - strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name)); - -out: - return err; -} - -static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { - {.compatible = "qcom,ufs-phy-qmp-20nm"}, - {}, -}; -MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); - -static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { - .probe = ufs_qcom_phy_qmp_20nm_probe, - .driver = { - .of_match_table = ufs_qcom_phy_qmp_20nm_of_match, - .name = "ufs_qcom_phy_qmp_20nm", - }, -}; - -module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); - -MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h deleted file mode 100644 index 8ce79f524eed..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h +++ /dev/null @@ -1,226 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#ifndef UFS_QCOM_PHY_QMP_20NM_H_ -#define UFS_QCOM_PHY_QMP_20NM_H_ - -#include "phy-qcom-ufs-i.h" - -/* QCOM UFS PHY control registers */ - -#define COM_OFF(x) (0x000 + x) -#define PHY_OFF(x) (0xC00 + x) -#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) -#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) - -/* UFS PHY PLL block registers */ -#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0) -#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04) -#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14) -#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24) -#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28) -#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30) -#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34) -#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38) -#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C) -#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48) -#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C) -#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50) -#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90) -#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94) -#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98) -#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C) -#define QSERDES_COM_BGTC COM_OFF(0xA0) -#define QSERDES_COM_DEC_START1 COM_OFF(0xAC) -#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0) -#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8) -#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC) -#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100) -#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104) -#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108) -#define QSERDES_COM_DEC_START2 COM_OFF(0x10C) -#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110) -#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114) -#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118) - -/* TX LANE n (0, 1) registers */ -#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08) -#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C) -#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54) - -/* RX LANE n (0, 1) registers */ -#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0) -#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8) -#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8) -#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC) -#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0) -#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4) -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC) -#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC) -#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100) - -/* UFS PHY registers */ -#define UFS_PHY_PHY_START PHY_OFF(0x00) -#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4) -#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44) -#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08) -#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C) -#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10) -#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14) -#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34) -#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38) -#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C) -#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40) -#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68) -#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28) -#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C) -#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48) -#define UFS_PHY_PLL_CNTL PHY_OFF(0x50) -#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54) -#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C) -#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58) -#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60) -#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64) -#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C) -#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4) -#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0) -#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8) -#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4) -#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC) -#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8) -#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC) -#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100) -#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c) -#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160) -#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7) -#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6) -#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5) -#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4) -#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3) -#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2) -#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1) -#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0) -#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164) -#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168) -#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C) -#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170) -#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174) - -#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3 - -/* - * This structure represents the 20nm specific phy. - * common_cfg MUST remain the first field in this structure - * in case extra fields are added. This way, when calling - * get_ufs_qcom_phy() of generic phy, we can extract the - * common phy structure (struct ufs_qcom_phy) out of it - * regardless of the relevant specific phy. - */ -struct ufs_qcom_phy_qmp_20nm { - struct ufs_qcom_phy common_cfg; -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = { - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = { - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), -}; - -static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65), - UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e), -}; - -#endif diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c deleted file mode 100644 index 763c8d396af1..000000000000 --- a/drivers/phy/qualcomm/phy-qcom-ufs.c +++ /dev/null @@ -1,648 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. - */ - -#include "phy-qcom-ufs-i.h" - -#define MAX_PROP_NAME 32 -#define VDDA_PHY_MIN_UV 1000000 -#define VDDA_PHY_MAX_UV 1000000 -#define VDDA_PLL_MIN_UV 1800000 -#define VDDA_PLL_MAX_UV 1800000 -#define VDDP_REF_CLK_MIN_UV 1200000 -#define VDDP_REF_CLK_MAX_UV 1200000 - -int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, - struct ufs_qcom_phy_calibration *tbl_A, - int tbl_size_A, - struct ufs_qcom_phy_calibration *tbl_B, - int tbl_size_B, bool is_rate_B) -{ - int i; - int ret = 0; - - if (!tbl_A) { - dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); - ret = EINVAL; - goto out; - } - - for (i = 0; i < tbl_size_A; i++) - writel_relaxed(tbl_A[i].cfg_value, - ufs_qcom_phy->mmio + tbl_A[i].reg_offset); - - /* - * In case we would like to work in rate B, we need - * to override a registers that were configured in rate A table - * with registers of rate B table. - * table. - */ - if (is_rate_B) { - if (!tbl_B) { - dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", - __func__); - ret = EINVAL; - goto out; - } - - for (i = 0; i < tbl_size_B; i++) - writel_relaxed(tbl_B[i].cfg_value, - ufs_qcom_phy->mmio + tbl_B[i].reg_offset); - } - - /* flush buffered writes */ - mb(); - -out: - return ret; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); - -/* - * This assumes the embedded phy structure inside generic_phy is of type - * struct ufs_qcom_phy. In order to function properly it's crucial - * to keep the embedded struct "struct ufs_qcom_phy common_cfg" - * as the first inside generic_phy. - */ -struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) -{ - return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); -} -EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); - -static -int ufs_qcom_phy_base_init(struct platform_device *pdev, - struct ufs_qcom_phy *phy_common) -{ - struct device *dev = &pdev->dev; - struct resource *res; - int err = 0; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); - phy_common->mmio = devm_ioremap_resource(dev, res); - if (IS_ERR((void const *)phy_common->mmio)) { - err = PTR_ERR((void const *)phy_common->mmio); - phy_common->mmio = NULL; - dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", - __func__, err); - return err; - } - - /* "dev_ref_clk_ctrl_mem" is optional resource */ - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "dev_ref_clk_ctrl_mem"); - phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); - if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) - phy_common->dev_ref_clk_ctrl_mmio = NULL; - - return 0; -} - -struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, - struct ufs_qcom_phy *common_cfg, - const struct phy_ops *ufs_qcom_phy_gen_ops, - struct ufs_qcom_phy_specific_ops *phy_spec_ops) -{ - int err; - struct device *dev = &pdev->dev; - struct phy *generic_phy = NULL; - struct phy_provider *phy_provider; - - err = ufs_qcom_phy_base_init(pdev, common_cfg); - if (err) { - dev_err(dev, "%s: phy base init failed %d\n", __func__, err); - goto out; - } - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) { - err = PTR_ERR(phy_provider); - dev_err(dev, "%s: failed to register phy %d\n", __func__, err); - goto out; - } - - generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); - if (IS_ERR(generic_phy)) { - err = PTR_ERR(generic_phy); - dev_err(dev, "%s: failed to create phy %d\n", __func__, err); - generic_phy = NULL; - goto out; - } - - common_cfg->phy_spec_ops = phy_spec_ops; - common_cfg->dev = dev; - -out: - return generic_phy; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); - -static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common) -{ - struct reset_control *reset; - - if (phy_common->ufs_reset) - return 0; - - reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0); - if (IS_ERR(reset)) - return PTR_ERR(reset); - - phy_common->ufs_reset = reset; - return 0; -} - -static int __ufs_qcom_phy_clk_get(struct device *dev, - const char *name, struct clk **clk_out, bool err_print) -{ - struct clk *clk; - int err = 0; - - clk = devm_clk_get(dev, name); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - if (err_print) - dev_err(dev, "failed to get %s err %d", name, err); - } else { - *clk_out = clk; - } - - return err; -} - -static int ufs_qcom_phy_clk_get(struct device *dev, - const char *name, struct clk **clk_out) -{ - return __ufs_qcom_phy_clk_get(dev, name, clk_out, true); -} - -int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common) -{ - int err; - - if (of_device_is_compatible(phy_common->dev->of_node, - "qcom,msm8996-ufs-phy-qmp-14nm")) - goto skip_txrx_clk; - - err = ufs_qcom_phy_clk_get(phy_common->dev, "tx_iface_clk", - &phy_common->tx_iface_clk); - if (err) - goto out; - - err = ufs_qcom_phy_clk_get(phy_common->dev, "rx_iface_clk", - &phy_common->rx_iface_clk); - if (err) - goto out; - -skip_txrx_clk: - err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src", - &phy_common->ref_clk_src); - if (err) - goto out; - - /* - * "ref_clk_parent" is optional hence don't abort init if it's not - * found. - */ - __ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_parent", - &phy_common->ref_clk_parent, false); - - err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk", - &phy_common->ref_clk); - -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); - -static int ufs_qcom_phy_init_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg, - const char *name) -{ - int err = 0; - - char prop_name[MAX_PROP_NAME]; - - vreg->name = name; - vreg->reg = devm_regulator_get(dev, name); - if (IS_ERR(vreg->reg)) { - err = PTR_ERR(vreg->reg); - dev_err(dev, "failed to get %s, %d\n", name, err); - goto out; - } - - if (dev->of_node) { - snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); - err = of_property_read_u32(dev->of_node, - prop_name, &vreg->max_uA); - if (err && err != -EINVAL) { - dev_err(dev, "%s: failed to read %s\n", - __func__, prop_name); - goto out; - } else if (err == -EINVAL || !vreg->max_uA) { - if (regulator_count_voltages(vreg->reg) > 0) { - dev_err(dev, "%s: %s is mandatory\n", - __func__, prop_name); - goto out; - } - err = 0; - } - } - - if (!strcmp(name, "vdda-pll")) { - vreg->max_uV = VDDA_PLL_MAX_UV; - vreg->min_uV = VDDA_PLL_MIN_UV; - } else if (!strcmp(name, "vdda-phy")) { - vreg->max_uV = VDDA_PHY_MAX_UV; - vreg->min_uV = VDDA_PHY_MIN_UV; - } else if (!strcmp(name, "vddp-ref-clk")) { - vreg->max_uV = VDDP_REF_CLK_MAX_UV; - vreg->min_uV = VDDP_REF_CLK_MIN_UV; - } - -out: - return err; -} - -int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common) -{ - int err; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_pll, - "vdda-pll"); - if (err) - goto out; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_phy, - "vdda-phy"); - - if (err) - goto out; - - err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk, - "vddp-ref-clk"); - -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); - -static int ufs_qcom_phy_cfg_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg, bool on) -{ - int ret = 0; - struct regulator *reg = vreg->reg; - const char *name = vreg->name; - int min_uV; - int uA_load; - - if (regulator_count_voltages(reg) > 0) { - min_uV = on ? vreg->min_uV : 0; - ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); - if (ret) { - dev_err(dev, "%s: %s set voltage failed, err=%d\n", - __func__, name, ret); - goto out; - } - uA_load = on ? vreg->max_uA : 0; - ret = regulator_set_load(reg, uA_load); - if (ret >= 0) { - /* - * regulator_set_load() returns new regulator - * mode upon success. - */ - ret = 0; - } else { - dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", - __func__, name, uA_load, ret); - goto out; - } - } -out: - return ret; -} - -static int ufs_qcom_phy_enable_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg) -{ - int ret = 0; - - if (!vreg || vreg->enabled) - goto out; - - ret = ufs_qcom_phy_cfg_vreg(dev, vreg, true); - if (ret) { - dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", - __func__, ret); - goto out; - } - - ret = regulator_enable(vreg->reg); - if (ret) { - dev_err(dev, "%s: enable failed, err=%d\n", - __func__, ret); - goto out; - } - - vreg->enabled = true; -out: - return ret; -} - -static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy) -{ - int ret = 0; - - if (phy->is_ref_clk_enabled) - goto out; - - /* - * reference clock is propagated in a daisy-chained manner from - * source to phy, so ungate them at each stage. - */ - ret = clk_prepare_enable(phy->ref_clk_src); - if (ret) { - dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", - __func__, ret); - goto out; - } - - /* - * "ref_clk_parent" is optional clock hence make sure that clk reference - * is available before trying to enable the clock. - */ - if (phy->ref_clk_parent) { - ret = clk_prepare_enable(phy->ref_clk_parent); - if (ret) { - dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", - __func__, ret); - goto out_disable_src; - } - } - - ret = clk_prepare_enable(phy->ref_clk); - if (ret) { - dev_err(phy->dev, "%s: ref_clk enable failed %d\n", - __func__, ret); - goto out_disable_parent; - } - - phy->is_ref_clk_enabled = true; - goto out; - -out_disable_parent: - if (phy->ref_clk_parent) - clk_disable_unprepare(phy->ref_clk_parent); -out_disable_src: - clk_disable_unprepare(phy->ref_clk_src); -out: - return ret; -} - -static int ufs_qcom_phy_disable_vreg(struct device *dev, - struct ufs_qcom_phy_vreg *vreg) -{ - int ret = 0; - - if (!vreg || !vreg->enabled) - goto out; - - ret = regulator_disable(vreg->reg); - - if (!ret) { - /* ignore errors on applying disable config */ - ufs_qcom_phy_cfg_vreg(dev, vreg, false); - vreg->enabled = false; - } else { - dev_err(dev, "%s: %s disable failed, err=%d\n", - __func__, vreg->name, ret); - } -out: - return ret; -} - -static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) -{ - if (phy->is_ref_clk_enabled) { - clk_disable_unprepare(phy->ref_clk); - /* - * "ref_clk_parent" is optional clock hence make sure that clk - * reference is available before trying to disable the clock. - */ - if (phy->ref_clk_parent) - clk_disable_unprepare(phy->ref_clk_parent); - clk_disable_unprepare(phy->ref_clk_src); - phy->is_ref_clk_enabled = false; - } -} - -/* Turn ON M-PHY RMMI interface clocks */ -static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) -{ - int ret = 0; - - if (phy->is_iface_clk_enabled) - goto out; - - ret = clk_prepare_enable(phy->tx_iface_clk); - if (ret) { - dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", - __func__, ret); - goto out; - } - ret = clk_prepare_enable(phy->rx_iface_clk); - if (ret) { - clk_disable_unprepare(phy->tx_iface_clk); - dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", - __func__, ret); - goto out; - } - phy->is_iface_clk_enabled = true; - -out: - return ret; -} - -/* Turn OFF M-PHY RMMI interface clocks */ -static void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy) -{ - if (phy->is_iface_clk_enabled) { - clk_disable_unprepare(phy->tx_iface_clk); - clk_disable_unprepare(phy->rx_iface_clk); - phy->is_iface_clk_enabled = false; - } -} - -static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy) -{ - int ret = 0; - - if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { - dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", - __func__); - ret = -ENOTSUPP; - } else { - ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); - } - - return ret; -} - -int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) -{ - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); - int ret = 0; - - if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { - dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", - __func__); - ret = -ENOTSUPP; - } else { - ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, - tx_lanes); - } - - return ret; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable); - -void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, - u8 major, u16 minor, u16 step) -{ - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); - - ufs_qcom_phy->host_ctrl_rev_major = major; - ufs_qcom_phy->host_ctrl_rev_minor = minor; - ufs_qcom_phy->host_ctrl_rev_step = step; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version); - -static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy) -{ - if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { - dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", - __func__); - return -ENOTSUPP; - } - - return ufs_qcom_phy->phy_spec_ops-> - is_physical_coding_sublayer_ready(ufs_qcom_phy); -} - -int ufs_qcom_phy_power_on(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - struct device *dev = phy_common->dev; - bool is_rate_B = false; - int err; - - err = ufs_qcom_phy_get_reset(phy_common); - if (err) - return err; - - err = reset_control_assert(phy_common->ufs_reset); - if (err) - return err; - - if (phy_common->mode == PHY_MODE_UFS_HS_B) - is_rate_B = true; - - err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B); - if (err) - return err; - - err = reset_control_deassert(phy_common->ufs_reset); - if (err) { - dev_err(dev, "Failed to assert UFS PHY reset"); - return err; - } - - err = ufs_qcom_phy_start_serdes(phy_common); - if (err) - return err; - - err = ufs_qcom_phy_is_pcs_ready(phy_common); - if (err) - return err; - - err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); - if (err) { - dev_err(dev, "%s enable vdda_phy failed, err=%d\n", - __func__, err); - goto out; - } - - phy_common->phy_spec_ops->power_control(phy_common, true); - - /* vdda_pll also enables ref clock LDOs so enable it first */ - err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_pll); - if (err) { - dev_err(dev, "%s enable vdda_pll failed, err=%d\n", - __func__, err); - goto out_disable_phy; - } - - err = ufs_qcom_phy_enable_iface_clk(phy_common); - if (err) { - dev_err(dev, "%s enable phy iface clock failed, err=%d\n", - __func__, err); - goto out_disable_pll; - } - - err = ufs_qcom_phy_enable_ref_clk(phy_common); - if (err) { - dev_err(dev, "%s enable phy ref clock failed, err=%d\n", - __func__, err); - goto out_disable_iface_clk; - } - - /* enable device PHY ref_clk pad rail */ - if (phy_common->vddp_ref_clk.reg) { - err = ufs_qcom_phy_enable_vreg(dev, - &phy_common->vddp_ref_clk); - if (err) { - dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", - __func__, err); - goto out_disable_ref_clk; - } - } - - goto out; - -out_disable_ref_clk: - ufs_qcom_phy_disable_ref_clk(phy_common); -out_disable_iface_clk: - ufs_qcom_phy_disable_iface_clk(phy_common); -out_disable_pll: - ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll); -out_disable_phy: - ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_phy); -out: - return err; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); - -int ufs_qcom_phy_power_off(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - - phy_common->phy_spec_ops->power_control(phy_common, false); - - if (phy_common->vddp_ref_clk.reg) - ufs_qcom_phy_disable_vreg(phy_common->dev, - &phy_common->vddp_ref_clk); - ufs_qcom_phy_disable_ref_clk(phy_common); - ufs_qcom_phy_disable_iface_clk(phy_common); - - ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll); - ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy); - reset_control_assert(phy_common->ufs_reset); - return 0; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); - -MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>"); -MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>"); -MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY"); -MODULE_LICENSE("GPL v2"); |