diff options
Diffstat (limited to 'drivers/phy/rockchip')
-rw-r--r-- | drivers/phy/rockchip/Makefile | 1 | ||||
-rw-r--r-- | drivers/phy/rockchip/phy-rockchip-typec.c | 82 |
2 files changed, 56 insertions, 27 deletions
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index bd0acdf38e0f..7f149d989046 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index 4d2c57f21d76..a958c9bced01 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -443,14 +443,34 @@ static inline int property_enable(struct rockchip_typec_phy *tcphy, return regmap_write(tcphy->grf_regs, reg->offset, val | mask); } +static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy) +{ + u16 tx_ana_ctrl_reg_1; + + /* + * Select the polarity of the xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down + * aux_p) + */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + if (!tcphy->flip) + tx_ana_ctrl_reg_1 |= BIT(12); + else + tx_ana_ctrl_reg_1 &= ~BIT(12); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); +} + static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) { + u16 tx_ana_ctrl_reg_1; u16 rdata, rdata2, val; /* disable txda_cal_latch_en for rewrite the calibration values */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata & 0xdfff; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 &= ~BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and @@ -472,9 +492,8 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) * Activate this signal for 1 clock cycle to sample new calibration * values. */ - rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); - val = rdata | 0x2000; - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(13); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); usleep_range(150, 200); /* set TX Voltage Level and TX Deemphasis to 0 */ @@ -482,8 +501,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) /* re-enable decap */ writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); - writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(3); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(4); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); @@ -494,8 +515,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); /* re-enables Bandgap reference for LDO */ - writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); - writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(7); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(8); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); /* * re-enables the transmitter pre-driver, driver data selection MUX, @@ -505,27 +528,26 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); /* - * BIT 12: Controls auxda_polarity, which selects the polarity of the - * xcvr: - * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull - * down aux_m) - * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down - * aux_p) + * Do some magic undocumented stuff, some of which appears to + * undo the "re-enables Bandgap reference for LDO" above. */ - val = 0xa078; - if (!tcphy->flip) - val |= BIT(12); - writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 |= BIT(15); + tx_ana_ctrl_reg_1 &= ~BIT(8); + tx_ana_ctrl_reg_1 &= ~BIT(7); + tx_ana_ctrl_reg_1 |= BIT(6); + tx_ana_ctrl_reg_1 |= BIT(5); + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); writel(0, tcphy->base + TX_ANA_CTRL_REG_3); writel(0, tcphy->base + TX_ANA_CTRL_REG_4); writel(0, tcphy->base + TX_ANA_CTRL_REG_5); /* - * Controls low_power_swing_en, set the voltage swing of the driver - * to 400mv. The values below are peak to peak (differential) values. + * Controls low_power_swing_en, don't set the voltage swing of the + * driver to 400mv. The values below are peak to peak (differential) + * values. */ - writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL); writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); /* Controls tx_high_z_tm_en */ @@ -555,6 +577,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) reset_control_deassert(tcphy->tcphy_rst); property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + tcphy_dp_aux_set_flip(tcphy); tcphy_cfg_24m(tcphy); @@ -685,8 +708,11 @@ static int rockchip_usb3_phy_power_on(struct phy *phy) if (tcphy->mode == new_mode) goto unlock_ret; - if (tcphy->mode == MODE_DISCONNECT) - tcphy_phy_init(tcphy, new_mode); + if (tcphy->mode == MODE_DISCONNECT) { + ret = tcphy_phy_init(tcphy, new_mode); + if (ret) + goto unlock_ret; + } /* wait TCPHY for pipe ready */ for (timeout = 0; timeout < 100; timeout++) { @@ -760,10 +786,12 @@ static int rockchip_dp_phy_power_on(struct phy *phy) */ if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { tcphy_phy_deinit(tcphy); - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } else if (tcphy->mode == MODE_DISCONNECT) { - tcphy_phy_init(tcphy, new_mode); + ret = tcphy_phy_init(tcphy, new_mode); } + if (ret) + goto unlock_ret; ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, val, val & DP_MODE_A2, 1000, |