summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/pinctrl-rockchip.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/pinctrl-rockchip.c')
-rw-r--r--drivers/pinctrl/pinctrl-rockchip.c292
1 files changed, 229 insertions, 63 deletions
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index e0718b7c4abc..e939c28cbf1f 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -56,8 +56,20 @@
#define GPIO_EXT_PORT 0x50
#define GPIO_LS_SYNC 0x60
+enum rockchip_pinctrl_type {
+ RK2928,
+ RK3066B,
+ RK3188,
+};
+
+enum rockchip_pin_bank_type {
+ COMMON_BANK,
+ RK3188_BANK0,
+};
+
/**
* @reg_base: register base of the gpio bank
+ * @reg_pull: optional separate register for additional pull settings
* @clk: clock of the gpio bank
* @irq: interrupt of the gpio bank
* @pin_base: first pin number
@@ -74,12 +86,14 @@
*/
struct rockchip_pin_bank {
void __iomem *reg_base;
+ void __iomem *reg_pull;
struct clk *clk;
int irq;
u32 pin_base;
u8 nr_pins;
char *name;
u8 bank_num;
+ enum rockchip_pin_bank_type bank_type;
bool valid;
struct device_node *of_node;
struct rockchip_pinctrl *drvdata;
@@ -87,7 +101,7 @@ struct rockchip_pin_bank {
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range grange;
spinlock_t slock;
-
+ u32 toggle_edge_mode;
};
#define PIN_BANK(id, pins, label) \
@@ -98,18 +112,16 @@ struct rockchip_pin_bank {
}
/**
- * @pull_auto: some SoCs don't allow pulls to be specified as up or down, but
- * instead decide this automatically based on the pad-type.
*/
struct rockchip_pin_ctrl {
struct rockchip_pin_bank *pin_banks;
u32 nr_banks;
u32 nr_pins;
char *label;
+ enum rockchip_pinctrl_type type;
int mux_offset;
- int pull_offset;
- bool pull_auto;
- int pull_bank_stride;
+ void (*pull_calc_reg)(struct rockchip_pin_bank *bank, int pin_num,
+ void __iomem **reg, u8 *bit);
};
struct rockchip_pin_config {
@@ -148,6 +160,7 @@ struct rockchip_pmx_func {
struct rockchip_pinctrl {
void __iomem *reg_base;
+ void __iomem *reg_pull;
struct device *dev;
struct rockchip_pin_ctrl *ctrl;
struct pinctrl_desc pctl;
@@ -354,31 +367,92 @@ static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
spin_unlock_irqrestore(&bank->slock, flags);
}
+#define RK2928_PULL_OFFSET 0x118
+#define RK2928_PULL_PINS_PER_REG 16
+#define RK2928_PULL_BANK_STRIDE 8
+
+static void rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, void __iomem **reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *reg = info->reg_base + RK2928_PULL_OFFSET;
+ *reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
+ *reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4;
+
+ *bit = pin_num % RK2928_PULL_PINS_PER_REG;
+};
+
+#define RK3188_PULL_BITS_PER_PIN 2
+#define RK3188_PULL_PINS_PER_REG 8
+#define RK3188_PULL_BANK_STRIDE 16
+
+static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, void __iomem **reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 12 pins of the first bank are located elsewhere */
+ if (bank->bank_type == RK3188_BANK0 && pin_num < 12) {
+ *reg = bank->reg_pull +
+ ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
+ *bit = pin_num % RK3188_PULL_PINS_PER_REG;
+ *bit *= RK3188_PULL_BITS_PER_PIN;
+ } else {
+ *reg = info->reg_pull - 4;
+ *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
+ *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
+
+ /*
+ * The bits in these registers have an inverse ordering
+ * with the lowest pin being in bits 15:14 and the highest
+ * pin in bits 1:0
+ */
+ *bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG);
+ *bit *= RK3188_PULL_BITS_PER_PIN;
+ }
+}
+
static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
{
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
void __iomem *reg;
u8 bit;
+ u32 data;
/* rk3066b does support any pulls */
- if (!ctrl->pull_offset)
+ if (ctrl->type == RK3066B)
return PIN_CONFIG_BIAS_DISABLE;
- reg = info->reg_base + ctrl->pull_offset;
-
- if (ctrl->pull_auto) {
- reg += bank->bank_num * ctrl->pull_bank_stride;
- reg += (pin_num / 16) * 4;
- bit = pin_num % 16;
+ ctrl->pull_calc_reg(bank, pin_num, &reg, &bit);
+ switch (ctrl->type) {
+ case RK2928:
return !(readl_relaxed(reg) & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
- } else {
- dev_err(info->dev, "pull support for rk31xx not implemented\n");
+ case RK3188:
+ data = readl_relaxed(reg) >> bit;
+ data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
+
+ switch (data) {
+ case 0:
+ return PIN_CONFIG_BIAS_DISABLE;
+ case 1:
+ return PIN_CONFIG_BIAS_PULL_UP;
+ case 2:
+ return PIN_CONFIG_BIAS_PULL_DOWN;
+ case 3:
+ return PIN_CONFIG_BIAS_BUS_HOLD;
+ }
+
+ dev_err(info->dev, "unknown pull setting\n");
return -EIO;
- }
+ default:
+ dev_err(info->dev, "unsupported pinctrl type\n");
+ return -EINVAL;
+ };
}
static int rockchip_set_pull(struct rockchip_pin_bank *bank,
@@ -395,22 +469,13 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
bank->bank_num, pin_num, pull);
/* rk3066b does support any pulls */
- if (!ctrl->pull_offset)
+ if (ctrl->type == RK3066B)
return pull ? -EINVAL : 0;
- reg = info->reg_base + ctrl->pull_offset;
-
- if (ctrl->pull_auto) {
- if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
- pull != PIN_CONFIG_BIAS_DISABLE) {
- dev_err(info->dev, "only PIN_DEFAULT and DISABLE allowed\n");
- return -EINVAL;
- }
-
- reg += bank->bank_num * ctrl->pull_bank_stride;
- reg += (pin_num / 16) * 4;
- bit = pin_num % 16;
+ ctrl->pull_calc_reg(bank, pin_num, &reg, &bit);
+ switch (ctrl->type) {
+ case RK2928:
spin_lock_irqsave(&bank->slock, flags);
data = BIT(bit + 16);
@@ -419,14 +484,38 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
writel(data, reg);
spin_unlock_irqrestore(&bank->slock, flags);
- } else {
- if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT) {
- dev_err(info->dev, "pull direction (up/down) needs to be specified\n");
+ break;
+ case RK3188:
+ spin_lock_irqsave(&bank->slock, flags);
+
+ /* enable the write to the equivalent lower bits */
+ data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
+
+ switch (pull) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ data |= (1 << bit);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ data |= (2 << bit);
+ break;
+ case PIN_CONFIG_BIAS_BUS_HOLD:
+ data |= (3 << bit);
+ break;
+ default:
+ dev_err(info->dev, "unsupported pull setting %d\n",
+ pull);
return -EINVAL;
}
- dev_err(info->dev, "pull support for rk31xx not implemented\n");
- return -EIO;
+ writel(data, reg);
+
+ spin_unlock_irqrestore(&bank->slock, flags);
+ break;
+ default:
+ dev_err(info->dev, "unsupported pinctrl type\n");
+ return -EINVAL;
}
return 0;
@@ -556,20 +645,17 @@ static const struct pinmux_ops rockchip_pmx_ops = {
static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
enum pin_config_param pull)
{
- /* rk3066b does support any pulls */
- if (!ctrl->pull_offset)
+ switch (ctrl->type) {
+ case RK2928:
+ return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT ||
+ pull == PIN_CONFIG_BIAS_DISABLE);
+ case RK3066B:
return pull ? false : true;
-
- if (ctrl->pull_auto) {
- if (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT &&
- pull != PIN_CONFIG_BIAS_DISABLE)
- return false;
- } else {
- if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
- return false;
+ case RK3188:
+ return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
}
- return true;
+ return false;
}
/* set the pin config settings for a specified pin */
@@ -597,6 +683,7 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+ case PIN_CONFIG_BIAS_BUS_HOLD:
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
return -ENOTSUPP;
@@ -635,6 +722,7 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+ case PIN_CONFIG_BIAS_BUS_HOLD:
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
return -ENOTSUPP;
@@ -656,7 +744,11 @@ static const struct pinconf_ops rockchip_pinconf_ops = {
.pin_config_set = rockchip_pinconf_set,
};
-static const char *gpio_compat = "rockchip,gpio-bank";
+static const struct of_device_id rockchip_bank_match[] = {
+ { .compatible = "rockchip,gpio-bank" },
+ { .compatible = "rockchip,rk3188-gpio-bank0" },
+ {},
+};
static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info,
struct device_node *np)
@@ -664,7 +756,7 @@ static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info,
struct device_node *child;
for_each_child_of_node(np, child) {
- if (of_device_is_compatible(child, gpio_compat))
+ if (of_match_node(rockchip_bank_match, child))
continue;
info->nfunctions++;
@@ -807,8 +899,9 @@ static int rockchip_pinctrl_parse_dt(struct platform_device *pdev,
i = 0;
for_each_child_of_node(np, child) {
- if (of_device_is_compatible(child, gpio_compat))
+ if (of_match_node(rockchip_bank_match, child))
continue;
+
ret = rockchip_pinctrl_parse_functions(child, info, i++);
if (ret) {
dev_err(&pdev->dev, "failed to parse function\n");
@@ -985,7 +1078,9 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
struct rockchip_pin_bank *bank = irq_get_handler_data(irq);
+ u32 polarity = 0, data = 0;
u32 pend;
+ bool edge_changed = false;
dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
@@ -993,6 +1088,12 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS);
+ if (bank->toggle_edge_mode) {
+ polarity = readl_relaxed(bank->reg_base +
+ GPIO_INT_POLARITY);
+ data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT);
+ }
+
while (pend) {
unsigned int virq;
@@ -1007,9 +1108,30 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq);
+ /*
+ * Triggering IRQ on both rising and falling edge
+ * needs manual intervention.
+ */
+ if (bank->toggle_edge_mode & BIT(irq)) {
+ if (data & BIT(irq))
+ polarity &= ~BIT(irq);
+ else
+ polarity |= BIT(irq);
+
+ edge_changed = true;
+ }
+
generic_handle_irq(virq);
}
+ if (bank->toggle_edge_mode && edge_changed) {
+ /* Interrupt params should only be set with ints disabled */
+ data = readl_relaxed(bank->reg_base + GPIO_INTEN);
+ writel_relaxed(0, bank->reg_base + GPIO_INTEN);
+ writel(polarity, bank->reg_base + GPIO_INT_POLARITY);
+ writel(data, bank->reg_base + GPIO_INTEN);
+ }
+
chained_irq_exit(chip, desc);
}
@@ -1022,6 +1144,12 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
u32 level;
u32 data;
+ /* make sure the pin is configured as gpio input */
+ rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+ data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+ data &= ~mask;
+ writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
+
if (type & IRQ_TYPE_EDGE_BOTH)
__irq_set_handler_locked(d->irq, handle_edge_irq);
else
@@ -1033,19 +1161,37 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY);
switch (type) {
+ case IRQ_TYPE_EDGE_BOTH:
+ bank->toggle_edge_mode |= mask;
+ level |= mask;
+
+ /*
+ * Determine gpio state. If 1 next interrupt should be falling
+ * otherwise rising.
+ */
+ data = readl(bank->reg_base + GPIO_EXT_PORT);
+ if (data & mask)
+ polarity &= ~mask;
+ else
+ polarity |= mask;
+ break;
case IRQ_TYPE_EDGE_RISING:
+ bank->toggle_edge_mode &= ~mask;
level |= mask;
polarity |= mask;
break;
case IRQ_TYPE_EDGE_FALLING:
+ bank->toggle_edge_mode &= ~mask;
level |= mask;
polarity &= ~mask;
break;
case IRQ_TYPE_LEVEL_HIGH:
+ bank->toggle_edge_mode &= ~mask;
level &= ~mask;
polarity |= mask;
break;
case IRQ_TYPE_LEVEL_LOW:
+ bank->toggle_edge_mode &= ~mask;
level &= ~mask;
polarity &= ~mask;
break;
@@ -1059,12 +1205,6 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
irq_gc_unlock(gc);
- /* make sure the pin is configured as gpio input */
- rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
- data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
- data &= ~mask;
- writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
-
return 0;
}
@@ -1205,6 +1345,26 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
if (IS_ERR(bank->reg_base))
return PTR_ERR(bank->reg_base);
+ /*
+ * special case, where parts of the pull setting-registers are
+ * part of the PMU register space
+ */
+ if (of_device_is_compatible(bank->of_node,
+ "rockchip,rk3188-gpio-bank0")) {
+ bank->bank_type = RK3188_BANK0;
+
+ if (of_address_to_resource(bank->of_node, 1, &res)) {
+ dev_err(dev, "cannot find IO resource for bank\n");
+ return -ENOENT;
+ }
+
+ bank->reg_pull = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(bank->reg_pull))
+ return PTR_ERR(bank->reg_pull);
+ } else {
+ bank->bank_type = COMMON_BANK;
+ }
+
bank->irq = irq_of_parse_and_map(bank->of_node, 0);
bank->clk = of_clk_get(bank->of_node, 0);
@@ -1289,6 +1449,14 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
if (IS_ERR(info->reg_base))
return PTR_ERR(info->reg_base);
+ /* The RK3188 has its pull registers in a separate place */
+ if (ctrl->type == RK3188) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ info->reg_pull = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(info->reg_base))
+ return PTR_ERR(info->reg_base);
+ }
+
ret = rockchip_gpiolib_register(pdev, info);
if (ret)
return ret;
@@ -1315,10 +1483,9 @@ static struct rockchip_pin_ctrl rk2928_pin_ctrl = {
.pin_banks = rk2928_pin_banks,
.nr_banks = ARRAY_SIZE(rk2928_pin_banks),
.label = "RK2928-GPIO",
+ .type = RK2928,
.mux_offset = 0xa8,
- .pull_offset = 0x118,
- .pull_auto = 1,
- .pull_bank_stride = 8,
+ .pull_calc_reg = rk2928_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3066a_pin_banks[] = {
@@ -1334,10 +1501,9 @@ static struct rockchip_pin_ctrl rk3066a_pin_ctrl = {
.pin_banks = rk3066a_pin_banks,
.nr_banks = ARRAY_SIZE(rk3066a_pin_banks),
.label = "RK3066a-GPIO",
+ .type = RK2928,
.mux_offset = 0xa8,
- .pull_offset = 0x118,
- .pull_auto = 1,
- .pull_bank_stride = 8,
+ .pull_calc_reg = rk2928_calc_pull_reg_and_bit,
};
static struct rockchip_pin_bank rk3066b_pin_banks[] = {
@@ -1351,8 +1517,8 @@ static struct rockchip_pin_ctrl rk3066b_pin_ctrl = {
.pin_banks = rk3066b_pin_banks,
.nr_banks = ARRAY_SIZE(rk3066b_pin_banks),
.label = "RK3066b-GPIO",
+ .type = RK3066B,
.mux_offset = 0x60,
- .pull_offset = -EINVAL,
};
static struct rockchip_pin_bank rk3188_pin_banks[] = {
@@ -1366,9 +1532,9 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
.pin_banks = rk3188_pin_banks,
.nr_banks = ARRAY_SIZE(rk3188_pin_banks),
.label = "RK3188-GPIO",
+ .type = RK3188,
.mux_offset = 0x68,
- .pull_offset = 0x164,
- .pull_bank_stride = 16,
+ .pull_calc_reg = rk3188_calc_pull_reg_and_bit,
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {