diff options
Diffstat (limited to 'drivers/platform/x86/thinkpad_acpi.c')
-rw-r--r-- | drivers/platform/x86/thinkpad_acpi.c | 171 |
1 files changed, 150 insertions, 21 deletions
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index ff7f0a4f2475..4864a5c189d4 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -885,11 +885,19 @@ static ssize_t dispatch_proc_write(struct file *file, if (!ibm || !ibm->write) return -EINVAL; + if (count > PAGE_SIZE - 1) + return -EINVAL; + + kernbuf = kmalloc(count + 1, GFP_KERNEL); + if (!kernbuf) + return -ENOMEM; - kernbuf = strndup_user(userbuf, PAGE_SIZE); - if (IS_ERR(kernbuf)) - return PTR_ERR(kernbuf); + if (copy_from_user(kernbuf, userbuf, count)) { + kfree(kernbuf); + return -EFAULT; + } + kernbuf[count] = 0; ret = ibm->write(kernbuf); if (ret == 0) ret = count; @@ -4022,8 +4030,8 @@ static bool hotkey_notify_6xxx(const u32 hkey, return true; case TP_HKEY_EV_THM_CSM_COMPLETED: pr_debug("EC reports: Thermal Control Command set completed (DYTC)\n"); - /* recommended action: do nothing, we don't have - * Lenovo ATM information */ + /* Thermal event - pass on to event handler */ + tpacpi_driver_event(hkey); return true; case TP_HKEY_EV_THM_TRANSFM_CHANGED: pr_debug("EC reports: Thermal Transformation changed (GMTS)\n"); @@ -6955,10 +6963,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm) pr_warn("Cannot enable backlight brightness support, ACPI is already handling it. Refer to the acpi_backlight kernel parameter.\n"); return 1; } - } else if (tp_features.bright_acpimode && brightness_enable > 1) { - pr_notice("Standard ACPI backlight interface not available, thinkpad_acpi native brightness control enabled\n"); + } else if (!tp_features.bright_acpimode) { + pr_notice("ACPI backlight interface not available\n"); + return 1; } + pr_notice("ACPI native brightness control enabled\n"); + /* * Check for module parameter bogosity, note that we * init brightness_mode to TPACPI_BRGHT_MODE_MAX in order to be @@ -7957,7 +7968,7 @@ static struct ibm_struct volume_driver_data = { * does so, its initial value is meaningless (0x07). * * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * https://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues * * ---- * @@ -7982,7 +7993,7 @@ static struct ibm_struct volume_driver_data = { * mode. * * For firmware bugs, refer to: - * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * https://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues * * ---- * @@ -9307,9 +9318,6 @@ static struct ibm_struct mute_led_driver_data = { #define GET_STOP "BCSG" #define SET_STOP "BCSS" -#define START_ATTR "charge_start_threshold" -#define STOP_ATTR "charge_stop_threshold" - enum { BAT_ANY = 0, BAT_PRIMARY = 1, @@ -9595,38 +9603,52 @@ static ssize_t tpacpi_battery_show(int what, return sprintf(buf, "%d\n", ret); } -static ssize_t charge_start_threshold_show(struct device *device, +static ssize_t charge_control_start_threshold_show(struct device *device, struct device_attribute *attr, char *buf) { return tpacpi_battery_show(THRESHOLD_START, device, buf); } -static ssize_t charge_stop_threshold_show(struct device *device, +static ssize_t charge_control_end_threshold_show(struct device *device, struct device_attribute *attr, char *buf) { return tpacpi_battery_show(THRESHOLD_STOP, device, buf); } -static ssize_t charge_start_threshold_store(struct device *dev, +static ssize_t charge_control_start_threshold_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { return tpacpi_battery_store(THRESHOLD_START, dev, buf, count); } -static ssize_t charge_stop_threshold_store(struct device *dev, +static ssize_t charge_control_end_threshold_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { return tpacpi_battery_store(THRESHOLD_STOP, dev, buf, count); } -static DEVICE_ATTR_RW(charge_start_threshold); -static DEVICE_ATTR_RW(charge_stop_threshold); +static DEVICE_ATTR_RW(charge_control_start_threshold); +static DEVICE_ATTR_RW(charge_control_end_threshold); +static struct device_attribute dev_attr_charge_start_threshold = __ATTR( + charge_start_threshold, + 0644, + charge_control_start_threshold_show, + charge_control_start_threshold_store +); +static struct device_attribute dev_attr_charge_stop_threshold = __ATTR( + charge_stop_threshold, + 0644, + charge_control_end_threshold_show, + charge_control_end_threshold_store +); static struct attribute *tpacpi_battery_attrs[] = { + &dev_attr_charge_control_start_threshold.attr, + &dev_attr_charge_control_end_threshold.attr, &dev_attr_charge_start_threshold.attr, &dev_attr_charge_stop_threshold.attr, NULL, @@ -9795,6 +9817,105 @@ static struct ibm_struct lcdshadow_driver_data = { .write = lcdshadow_write, }; +/************************************************************************* + * DYTC subdriver, for the Lenovo lapmode feature + */ + +#define DYTC_CMD_GET 2 /* To get current IC function and mode */ +#define DYTC_GET_LAPMODE_BIT 17 /* Set when in lapmode */ + +static bool dytc_lapmode; + +static void dytc_lapmode_notify_change(void) +{ + sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, "dytc_lapmode"); +} + +static int dytc_command(int command, int *output) +{ + acpi_handle dytc_handle; + + if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) { + /* Platform doesn't support DYTC */ + return -ENODEV; + } + if (!acpi_evalf(dytc_handle, output, NULL, "dd", command)) + return -EIO; + return 0; +} + +static int dytc_lapmode_get(bool *state) +{ + int output, err; + + err = dytc_command(DYTC_CMD_GET, &output); + if (err) + return err; + *state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false; + return 0; +} + +static void dytc_lapmode_refresh(void) +{ + bool new_state; + int err; + + err = dytc_lapmode_get(&new_state); + if (err || (new_state == dytc_lapmode)) + return; + + dytc_lapmode = new_state; + dytc_lapmode_notify_change(); +} + +/* sysfs lapmode entry */ +static ssize_t dytc_lapmode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", dytc_lapmode); +} + +static DEVICE_ATTR_RO(dytc_lapmode); + +static struct attribute *dytc_attributes[] = { + &dev_attr_dytc_lapmode.attr, + NULL, +}; + +static const struct attribute_group dytc_attr_group = { + .attrs = dytc_attributes, +}; + +static int tpacpi_dytc_init(struct ibm_init_struct *iibm) +{ + int err; + + err = dytc_lapmode_get(&dytc_lapmode); + /* If support isn't available (ENODEV) then don't return an error + * but just don't create the sysfs group + */ + if (err == -ENODEV) + return 0; + /* For all other errors we can flag the failure */ + if (err) + return err; + + /* Platform supports this feature - create the group */ + err = sysfs_create_group(&tpacpi_pdev->dev.kobj, &dytc_attr_group); + return err; +} + +static void dytc_exit(void) +{ + sysfs_remove_group(&tpacpi_pdev->dev.kobj, &dytc_attr_group); +} + +static struct ibm_struct dytc_driver_data = { + .name = "dytc", + .exit = dytc_exit, +}; + /**************************************************************************** **************************************************************************** * @@ -9842,6 +9963,10 @@ static void tpacpi_driver_event(const unsigned int hkey_event) mutex_unlock(&kbdlight_mutex); } + + if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) + dytc_lapmode_refresh(); + } static void hotkey_driver_event(const unsigned int scancode) @@ -10094,7 +10219,7 @@ static int __must_check __init get_thinkpad_model_data( * X32 or newer, all Z series; Some models must have an * up-to-date BIOS or they will not be detected. * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs + * See https://thinkwiki.org/wiki/List_of_DMI_IDs */ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { if (sscanf(dev->name, @@ -10280,6 +10405,10 @@ static struct ibm_init_struct ibms_init[] __initdata = { .init = tpacpi_lcdshadow_init, .data = &lcdshadow_driver_data, }, + { + .init = tpacpi_dytc_init, + .data = &dytc_driver_data, + }, }; static int __init set_ibm_param(const char *val, const struct kernel_param *kp) @@ -10613,8 +10742,8 @@ MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids); /* * DMI matching for module autoloading * - * See http://thinkwiki.org/wiki/List_of_DMI_IDs - * See http://thinkwiki.org/wiki/BIOS_Upgrade_Downloads + * See https://thinkwiki.org/wiki/List_of_DMI_IDs + * See https://thinkwiki.org/wiki/BIOS_Upgrade_Downloads * * Only models listed in thinkwiki will be supported, so add yours * if it is not there yet. |