diff options
Diffstat (limited to 'drivers/power/reset')
| -rw-r--r-- | drivers/power/reset/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/power/reset/Makefile | 2 | ||||
| -rw-r--r-- | drivers/power/reset/qnap-poweroff.c | 116 | ||||
| -rw-r--r-- | drivers/power/reset/restart-poweroff.c | 65 |
4 files changed, 200 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 6461b489fb09..1ae65b822864 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -13,3 +13,20 @@ config POWER_RESET_GPIO This driver supports turning off your board via a GPIO line. If your board needs a GPIO high/low to power down, say Y and create a binding in your devicetree. + +config POWER_RESET_QNAP + bool "QNAP power-off driver" + depends on OF_GPIO && POWER_RESET && PLAT_ORION + help + This driver supports turning off QNAP NAS devices by sending + commands to the microcontroller which controls the main power. + + Say Y if you have a QNAP NAS. + +config POWER_RESET_RESTART + bool "Restart power-off driver" + depends on ARM + help + Some boards don't actually have the ability to power off. + Instead they restart, and u-boot holds the SoC until the + user presses a key. u-boot then boots into Linux. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 751488a4a0c5..0f317f50c56f 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o +obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o +obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
\ No newline at end of file diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c new file mode 100644 index 000000000000..37f56f7ee926 --- /dev/null +++ b/drivers/power/reset/qnap-poweroff.c @@ -0,0 +1,116 @@ +/* + * QNAP Turbo NAS Board power off + * + * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch> + * + * Based on the code from: + * + * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> + * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/serial_reg.h> +#include <linux/kallsyms.h> +#include <linux/of.h> +#include <linux/io.h> +#include <linux/clk.h> + +#define UART1_REG(x) (base + ((UART_##x) << 2)) + +static void __iomem *base; +static unsigned long tclk; + +static void qnap_power_off(void) +{ + /* 19200 baud divisor */ + const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200)); + + pr_err("%s: triggering power-off...\n", __func__); + + /* hijack UART1 and reset into sane state (19200,8n1) */ + writel(0x83, UART1_REG(LCR)); + writel(divisor & 0xff, UART1_REG(DLL)); + writel((divisor >> 8) & 0xff, UART1_REG(DLM)); + writel(0x03, UART1_REG(LCR)); + writel(0x00, UART1_REG(IER)); + writel(0x00, UART1_REG(FCR)); + writel(0x00, UART1_REG(MCR)); + + /* send the power-off command 'A' to PIC */ + writel('A', UART1_REG(TX)); +} + +static int qnap_power_off_probe(struct platform_device *pdev) +{ + struct resource *res; + struct clk *clk; + char symname[KSYM_NAME_LEN]; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing resource"); + return -EINVAL; + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!base) { + dev_err(&pdev->dev, "Unable to map resource"); + return -EINVAL; + } + + /* We need to know tclk in order to calculate the UART divisor */ + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Clk missing"); + return PTR_ERR(clk); + } + + tclk = clk_get_rate(clk); + + /* Check that nothing else has already setup a handler */ + if (pm_power_off) { + lookup_symbol_name((ulong)pm_power_off, symname); + dev_err(&pdev->dev, + "pm_power_off already claimed %p %s", + pm_power_off, symname); + return -EBUSY; + } + pm_power_off = qnap_power_off; + + return 0; +} + +static int qnap_power_off_remove(struct platform_device *pdev) +{ + pm_power_off = NULL; + return 0; +} + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible = "qnap,power-off", }, + {} +}; +MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); + +static struct platform_driver qnap_power_off_driver = { + .probe = qnap_power_off_probe, + .remove = qnap_power_off_remove, + .driver = { + .owner = THIS_MODULE, + .name = "qnap_power_off", + .of_match_table = of_match_ptr(qnap_power_off_of_match_table), + }, +}; +module_platform_driver(qnap_power_off_driver); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); +MODULE_DESCRIPTION("QNAP Power off driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c new file mode 100644 index 000000000000..059cd1501e2a --- /dev/null +++ b/drivers/power/reset/restart-poweroff.c @@ -0,0 +1,65 @@ +/* + * Power off by restarting and let u-boot keep hold of the machine + * until the user presses a button for example. + * + * Andrew Lunn <andrew@lunn.ch> + * + * Copyright (C) 2012 Andrew Lunn + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/module.h> +#include <asm/system_misc.h> + +static void restart_poweroff_do_poweroff(void) +{ + arm_pm_restart('h', NULL); +} + +static int restart_poweroff_probe(struct platform_device *pdev) +{ + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + dev_err(&pdev->dev, + "pm_power_off function already registered"); + return -EBUSY; + } + + pm_power_off = &restart_poweroff_do_poweroff; + return 0; +} + +static int restart_poweroff_remove(struct platform_device *pdev) +{ + if (pm_power_off == &restart_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_restart_poweroff_match[] = { + { .compatible = "restart-poweroff", }, + {}, +}; + +static struct platform_driver restart_poweroff_driver = { + .probe = restart_poweroff_probe, + .remove = restart_poweroff_remove, + .driver = { + .name = "poweroff-restart", + .owner = THIS_MODULE, + .of_match_table = of_restart_poweroff_match, + }, +}; +module_platform_driver(restart_poweroff_driver); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch"); +MODULE_DESCRIPTION("restart poweroff driver"); +MODULE_LICENSE("GPLv2"); +MODULE_ALIAS("platform:poweroff-restart"); |