summaryrefslogtreecommitdiff
path: root/drivers/ras/amd/atl/umc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ras/amd/atl/umc.c')
-rw-r--r--drivers/ras/amd/atl/umc.c160
1 files changed, 114 insertions, 46 deletions
diff --git a/drivers/ras/amd/atl/umc.c b/drivers/ras/amd/atl/umc.c
index 59b6169093f7..a1b4accf7b96 100644
--- a/drivers/ras/amd/atl/umc.c
+++ b/drivers/ras/amd/atl/umc.c
@@ -68,6 +68,8 @@ struct xor_bits {
};
#define NUM_BANK_BITS 4
+#define NUM_COL_BITS 5
+#define NUM_SID_BITS 2
static struct {
/* UMC::CH::AddrHashBank */
@@ -80,7 +82,22 @@ static struct {
u8 bank_xor;
} addr_hash;
+static struct {
+ u8 bank[NUM_BANK_BITS];
+ u8 col[NUM_COL_BITS];
+ u8 sid[NUM_SID_BITS];
+ u8 num_row_lo;
+ u8 num_row_hi;
+ u8 row_lo;
+ u8 row_hi;
+ u8 pc;
+} bit_shifts;
+
#define MI300_UMC_CH_BASE 0x90000
+#define MI300_ADDR_CFG (MI300_UMC_CH_BASE + 0x30)
+#define MI300_ADDR_SEL (MI300_UMC_CH_BASE + 0x40)
+#define MI300_COL_SEL_LO (MI300_UMC_CH_BASE + 0x50)
+#define MI300_ADDR_SEL_2 (MI300_UMC_CH_BASE + 0xA4)
#define MI300_ADDR_HASH_BANK0 (MI300_UMC_CH_BASE + 0xC8)
#define MI300_ADDR_HASH_PC (MI300_UMC_CH_BASE + 0xE0)
#define MI300_ADDR_HASH_PC2 (MI300_UMC_CH_BASE + 0xE4)
@@ -90,17 +107,42 @@ static struct {
#define ADDR_HASH_ROW_XOR GENMASK(31, 14)
#define ADDR_HASH_BANK_XOR GENMASK(5, 0)
+#define ADDR_CFG_NUM_ROW_LO GENMASK(11, 8)
+#define ADDR_CFG_NUM_ROW_HI GENMASK(15, 12)
+
+#define ADDR_SEL_BANK0 GENMASK(3, 0)
+#define ADDR_SEL_BANK1 GENMASK(7, 4)
+#define ADDR_SEL_BANK2 GENMASK(11, 8)
+#define ADDR_SEL_BANK3 GENMASK(15, 12)
+#define ADDR_SEL_BANK4 GENMASK(20, 16)
+#define ADDR_SEL_ROW_LO GENMASK(27, 24)
+#define ADDR_SEL_ROW_HI GENMASK(31, 28)
+
+#define COL_SEL_LO_COL0 GENMASK(3, 0)
+#define COL_SEL_LO_COL1 GENMASK(7, 4)
+#define COL_SEL_LO_COL2 GENMASK(11, 8)
+#define COL_SEL_LO_COL3 GENMASK(15, 12)
+#define COL_SEL_LO_COL4 GENMASK(19, 16)
+
+#define ADDR_SEL_2_BANK5 GENMASK(4, 0)
+#define ADDR_SEL_2_CHAN GENMASK(15, 12)
+
/*
* Read UMC::CH::AddrHash{Bank,PC,PC2} registers to get XOR bits used
- * for hashing. Do this during module init, since the values will not
- * change during run time.
+ * for hashing.
+ *
+ * Also, read UMC::CH::Addr{Cfg,Sel,Sel2} and UMC::CH:ColSelLo registers to
+ * get the values needed to reconstruct the normalized address. Apply additional
+ * offsets to the raw register values, as needed.
+ *
+ * Do this during module init, since the values will not change during run time.
*
* These registers are instantiated for each UMC across each AMD Node.
* However, they should be identically programmed due to the fixed hardware
* design of MI300 systems. So read the values from Node 0 UMC 0 and keep a
* single global structure for simplicity.
*/
-int get_addr_hash_mi300(void)
+int get_umc_info_mi300(void)
{
u32 temp;
int ret;
@@ -130,6 +172,44 @@ int get_addr_hash_mi300(void)
addr_hash.bank_xor = FIELD_GET(ADDR_HASH_BANK_XOR, temp);
+ ret = amd_smn_read(0, MI300_ADDR_CFG, &temp);
+ if (ret)
+ return ret;
+
+ bit_shifts.num_row_hi = FIELD_GET(ADDR_CFG_NUM_ROW_HI, temp);
+ bit_shifts.num_row_lo = 10 + FIELD_GET(ADDR_CFG_NUM_ROW_LO, temp);
+
+ ret = amd_smn_read(0, MI300_ADDR_SEL, &temp);
+ if (ret)
+ return ret;
+
+ bit_shifts.bank[0] = 5 + FIELD_GET(ADDR_SEL_BANK0, temp);
+ bit_shifts.bank[1] = 5 + FIELD_GET(ADDR_SEL_BANK1, temp);
+ bit_shifts.bank[2] = 5 + FIELD_GET(ADDR_SEL_BANK2, temp);
+ bit_shifts.bank[3] = 5 + FIELD_GET(ADDR_SEL_BANK3, temp);
+ /* Use BankBit4 for the SID0 position. */
+ bit_shifts.sid[0] = 5 + FIELD_GET(ADDR_SEL_BANK4, temp);
+ bit_shifts.row_lo = 12 + FIELD_GET(ADDR_SEL_ROW_LO, temp);
+ bit_shifts.row_hi = 24 + FIELD_GET(ADDR_SEL_ROW_HI, temp);
+
+ ret = amd_smn_read(0, MI300_COL_SEL_LO, &temp);
+ if (ret)
+ return ret;
+
+ bit_shifts.col[0] = 2 + FIELD_GET(COL_SEL_LO_COL0, temp);
+ bit_shifts.col[1] = 2 + FIELD_GET(COL_SEL_LO_COL1, temp);
+ bit_shifts.col[2] = 2 + FIELD_GET(COL_SEL_LO_COL2, temp);
+ bit_shifts.col[3] = 2 + FIELD_GET(COL_SEL_LO_COL3, temp);
+ bit_shifts.col[4] = 2 + FIELD_GET(COL_SEL_LO_COL4, temp);
+
+ ret = amd_smn_read(0, MI300_ADDR_SEL_2, &temp);
+ if (ret)
+ return ret;
+
+ /* Use BankBit5 for the SID1 position. */
+ bit_shifts.sid[1] = 5 + FIELD_GET(ADDR_SEL_2_BANK5, temp);
+ bit_shifts.pc = 5 + FIELD_GET(ADDR_SEL_2_CHAN, temp);
+
return 0;
}
@@ -146,9 +226,6 @@ int get_addr_hash_mi300(void)
* The MCA address format is as follows:
* MCA_ADDR[27:0] = {S[1:0], P[0], R[14:0], B[3:0], C[4:0], Z[0]}
*
- * The normalized address format is fixed in hardware and is as follows:
- * NA[30:0] = {S[1:0], R[13:0], C4, B[1:0], B[3:2], C[3:2], P, C[1:0], Z[4:0]}
- *
* Additionally, the PC and Bank bits may be hashed. This must be accounted for before
* reconstructing the normalized address.
*/
@@ -158,18 +235,10 @@ int get_addr_hash_mi300(void)
#define MI300_UMC_MCA_PC BIT(25)
#define MI300_UMC_MCA_SID GENMASK(27, 26)
-#define MI300_NA_COL_1_0 GENMASK(6, 5)
-#define MI300_NA_PC BIT(7)
-#define MI300_NA_COL_3_2 GENMASK(9, 8)
-#define MI300_NA_BANK_3_2 GENMASK(11, 10)
-#define MI300_NA_BANK_1_0 GENMASK(13, 12)
-#define MI300_NA_COL_4 BIT(14)
-#define MI300_NA_ROW GENMASK(28, 15)
-#define MI300_NA_SID GENMASK(30, 29)
-
static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr)
{
- u16 i, col, row, bank, pc, sid, temp;
+ u16 i, col, row, bank, pc, sid;
+ u32 temp;
col = FIELD_GET(MI300_UMC_MCA_COL, addr);
bank = FIELD_GET(MI300_UMC_MCA_BANK, addr);
@@ -189,49 +258,48 @@ static unsigned long convert_dram_to_norm_addr_mi300(unsigned long addr)
/* Calculate hash for PC bit. */
if (addr_hash.pc.xor_enable) {
- /* Bits SID[1:0] act as Bank[6:5] for PC hash, so apply them here. */
- bank |= sid << 5;
-
temp = bitwise_xor_bits(col & addr_hash.pc.col_xor);
temp ^= bitwise_xor_bits(row & addr_hash.pc.row_xor);
- temp ^= bitwise_xor_bits(bank & addr_hash.bank_xor);
+ /* Bits SID[1:0] act as Bank[5:4] for PC hash, so apply them here. */
+ temp ^= bitwise_xor_bits((bank | sid << NUM_BANK_BITS) & addr_hash.bank_xor);
pc ^= temp;
-
- /* Drop SID bits for the sake of debug printing later. */
- bank &= 0x1F;
}
/* Reconstruct the normalized address starting with NA[4:0] = 0 */
addr = 0;
- /* NA[6:5] = Column[1:0] */
- temp = col & 0x3;
- addr |= FIELD_PREP(MI300_NA_COL_1_0, temp);
-
- /* NA[7] = PC */
- addr |= FIELD_PREP(MI300_NA_PC, pc);
-
- /* NA[9:8] = Column[3:2] */
- temp = (col >> 2) & 0x3;
- addr |= FIELD_PREP(MI300_NA_COL_3_2, temp);
+ /* Column bits */
+ for (i = 0; i < NUM_COL_BITS; i++) {
+ temp = (col >> i) & 0x1;
+ addr |= temp << bit_shifts.col[i];
+ }
- /* NA[11:10] = Bank[3:2] */
- temp = (bank >> 2) & 0x3;
- addr |= FIELD_PREP(MI300_NA_BANK_3_2, temp);
+ /* Bank bits */
+ for (i = 0; i < NUM_BANK_BITS; i++) {
+ temp = (bank >> i) & 0x1;
+ addr |= temp << bit_shifts.bank[i];
+ }
- /* NA[13:12] = Bank[1:0] */
- temp = bank & 0x3;
- addr |= FIELD_PREP(MI300_NA_BANK_1_0, temp);
+ /* Row lo bits */
+ for (i = 0; i < bit_shifts.num_row_lo; i++) {
+ temp = (row >> i) & 0x1;
+ addr |= temp << (i + bit_shifts.row_lo);
+ }
- /* NA[14] = Column[4] */
- temp = (col >> 4) & 0x1;
- addr |= FIELD_PREP(MI300_NA_COL_4, temp);
+ /* Row hi bits */
+ for (i = 0; i < bit_shifts.num_row_hi; i++) {
+ temp = (row >> (i + bit_shifts.num_row_lo)) & 0x1;
+ addr |= temp << (i + bit_shifts.row_hi);
+ }
- /* NA[28:15] = Row[13:0] */
- addr |= FIELD_PREP(MI300_NA_ROW, row);
+ /* PC bit */
+ addr |= pc << bit_shifts.pc;
- /* NA[30:29] = SID[1:0] */
- addr |= FIELD_PREP(MI300_NA_SID, sid);
+ /* SID bits */
+ for (i = 0; i < NUM_SID_BITS; i++) {
+ temp = (sid >> i) & 0x1;
+ addr |= temp << bit_shifts.sid[i];
+ }
pr_debug("Addr=0x%016lx", addr);
pr_debug("Bank=%u Row=%u Column=%u PC=%u SID=%u", bank, row, col, pc, sid);