diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 53 |
1 files changed, 49 insertions, 4 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 823f8e6e4801..965d4f0c18a6 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -178,6 +178,14 @@ config REGULATOR_ATC260X ATC260x PMICs. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_AW37503 + tristate "Awinic AW37503 Dual Output Power regulators" + depends on I2C && GPIOLIB + select REGMAP_I2C + help + This driver supports AW37503 single inductor - dual output + power supply specifically designed for display panels. + config REGULATOR_AXP20X tristate "X-POWERS AXP20X PMIC Regulators" depends on MFD_AXP20X @@ -546,11 +554,11 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. -config REGULATOR_MAX597X - tristate "Maxim 597x power switch and monitor" +config REGULATOR_MAX5970 + tristate "Maxim 5970/5978 power switch and monitor" depends on I2C depends on OF - depends on MFD_MAX597X + depends on MFD_MAX5970 help This driver controls a Maxim 5970/5978 switch via I2C bus. The MAX5970/5978 is a smart switch with no output regulation, but @@ -584,6 +592,16 @@ config REGULATOR_MAX77650 Semiconductor. This device has a SIMO with three independent power rails and an LDO. +config REGULATOR_MAX77857 + tristate "ADI MAX77857/MAX77831 regulator support" + depends on I2C + select REGMAP_I2C + help + This driver controls a ADI MAX77857 and MAX77831 regulators. + via I2C bus. MAX77857 and MAX77831 are high efficiency buck-boost + converters with input voltage range (2.5V to 16V). Say Y here to + enable the regulator driver + config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C @@ -989,6 +1007,18 @@ config REGULATOR_PWM This driver supports PWM controlled voltage regulators. PWM duty cycle can increase or decrease the voltage. +config REGULATOR_QCOM_REFGEN + tristate "Qualcomm REFGEN regulator driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM + depends on REGMAP + help + This driver supports the MMIO-mapped reference voltage regulator, + used internally by some PHYs on many Qualcomm SoCs. + + Say M here if you want to include support for this regulator as + a module. The module will be named "qcom-refgen-regulator". + config REGULATOR_QCOM_RPM tristate "Qualcomm RPM regulator driver" depends on MFD_QCOM_RPM @@ -1050,7 +1080,11 @@ config REGULATOR_RAA215300 depends on COMMON_CLK depends on I2C help - Support for the Renesas RAA215300 PMIC. + If you say yes to this option, support will be included for the + Renesas RAA215300 PMIC. + + Say M here if you want to include support for Renesas RAA215300 PMIC + as a module. The module will be named "raa215300". config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator" @@ -1232,6 +1266,17 @@ config REGULATOR_RTQ6752 synchronous boost converters for PAVDD, and one synchronous NAVDD buck-boost. This device is suitable for automotive TFT-LCD panel. +config REGULATOR_RTQ2208 + tristate "Richtek RTQ2208 SubPMIC Regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for RTQ2208 SubPMIC regulators. + The RTQ2208 is a multi-phase, programmable power management IC that + integrate with dual multi-configurable, synchronous buck converters + and two ldos. It features wide output voltage range from 0.4V to 2.05V + and the capability to configure the corresponding power stages. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST |