diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/da9055-regulator.c | 48 | ||||
| -rw-r--r-- | drivers/regulator/lp8788-buck.c | 64 | ||||
| -rw-r--r-- | drivers/regulator/max8973-regulator.c | 36 | ||||
| -rw-r--r-- | drivers/regulator/max8997-regulator.c | 85 | ||||
| -rw-r--r-- | drivers/regulator/max8998.c | 150 | ||||
| -rw-r--r-- | drivers/regulator/userspace-consumer.c | 1 |
6 files changed, 142 insertions, 242 deletions
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index 8fd9ac787588..352547c375bd 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -9,7 +9,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> @@ -413,31 +412,35 @@ static struct da9055_regulator_info da9055_regulator_info[] = { * GPIO can control regulator state and/or select the regulator register * set A/B for voltage ramping. */ -static int da9055_gpio_init(struct da9055_regulator *regulator, +static int da9055_gpio_init(struct device *dev, + struct da9055_regulator *regulator, struct regulator_config *config, struct da9055_pdata *pdata, int id) { struct da9055_regulator_info *info = regulator->info; + struct gpio_desc *ren; + struct gpio_desc *ena; + struct gpio_desc *rsel; int ret = 0; - if (!pdata) - return 0; + /* Look for "regulator-enable-gpios" GPIOs in the regulator node */ + ren = devm_gpiod_get_optional(dev, "regulator-enable", GPIOD_IN); + if (IS_ERR(ren)) + return PTR_ERR(ren); - if (pdata->gpio_ren && pdata->gpio_ren[id]) { - char name[18]; - int gpio_mux = pdata->gpio_ren[id]; + if (ren) { + /* This GPIO is not optional at this point */ + ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(ena)) + return PTR_ERR(ena); - config->ena_gpiod = pdata->ena_gpiods[id]; + config->ena_gpiod = ena; /* * GPI pin is muxed with regulator to control the * regulator state. */ - sprintf(name, "DA9055 GPI %d", gpio_mux); - ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN, - name); - if (ret < 0) - goto err; + gpiod_set_consumer_name(ren, "DA9055 ren GPI"); /* * Let the regulator know that its state is controlled @@ -448,24 +451,22 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, pdata->reg_ren[id] << DA9055_E_GPI_SHIFT); if (ret < 0) - goto err; + return ret; } - if (pdata->gpio_rsel && pdata->gpio_rsel[id]) { - char name[18]; - int gpio_mux = pdata->gpio_rsel[id]; + /* Look for "regulator-select-gpios" GPIOs in the regulator node */ + rsel = devm_gpiod_get_optional(dev, "regulator-select", GPIOD_IN); + if (IS_ERR(rsel)) + return PTR_ERR(rsel); + if (rsel) { regulator->reg_rselect = pdata->reg_rsel[id]; /* * GPI pin is muxed with regulator to select the * regulator register set A/B for voltage ramping. */ - sprintf(name, "DA9055 GPI %d", gpio_mux); - ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN, - name); - if (ret < 0) - goto err; + gpiod_set_consumer_name(rsel, "DA9055 rsel GPI"); /* * Let the regulator know that its register set A/B @@ -477,7 +478,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, << DA9055_V_GPI_SHIFT); } -err: return ret; } @@ -532,7 +532,7 @@ static int da9055_regulator_probe(struct platform_device *pdev) if (pdata) config.init_data = pdata->regulators[pdev->id]; - ret = da9055_gpio_init(regulator, &config, pdata, pdev->id); + ret = da9055_gpio_init(&pdev->dev, regulator, &config, pdata, pdev->id); if (ret < 0) return ret; diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index e97ade09dede..712eaa6ff8ab 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -13,7 +13,7 @@ #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/mfd/lp8788.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> /* register address */ #define LP8788_EN_BUCK 0x0C @@ -69,8 +69,8 @@ #define BUCK_FPWM_SHIFT(x) (x) enum lp8788_dvs_state { - DVS_LOW = GPIOF_OUT_INIT_LOW, - DVS_HIGH = GPIOF_OUT_INIT_HIGH, + DVS_LOW = 0, + DVS_HIGH = 1, }; enum lp8788_dvs_mode { @@ -89,6 +89,8 @@ struct lp8788_buck { struct lp8788 *lp; struct regulator_dev *regulator; void *dvs; + struct gpio_desc *gpio1; + struct gpio_desc *gpio2; /* Only used on BUCK2 */ }; /* BUCK 1 ~ 4 voltage ranges */ @@ -106,8 +108,7 @@ static void lp8788_buck1_set_dvs(struct lp8788_buck *buck) return; pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH; - if (gpio_is_valid(dvs->gpio)) - gpio_set_value(dvs->gpio, pinstate); + gpiod_set_value(buck->gpio1, pinstate); } static void lp8788_buck2_set_dvs(struct lp8788_buck *buck) @@ -139,11 +140,8 @@ static void lp8788_buck2_set_dvs(struct lp8788_buck *buck) return; } - if (gpio_is_valid(dvs->gpio[0])) - gpio_set_value(dvs->gpio[0], pin1); - - if (gpio_is_valid(dvs->gpio[1])) - gpio_set_value(dvs->gpio[1], pin2); + gpiod_set_value(buck->gpio1, pin1); + gpiod_set_value(buck->gpio2, pin2); } static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) @@ -202,19 +200,13 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, enum lp8788_buck_id id) { enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id); - struct lp8788_buck1_dvs *b1_dvs; - struct lp8788_buck2_dvs *b2_dvs; u8 val, idx, addr; int pin1, pin2; switch (id) { case BUCK1: if (mode == EXTPIN) { - b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs; - if (!b1_dvs) - goto err; - - idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0; + idx = gpiod_get_value(buck->gpio1); } else { lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S; @@ -223,12 +215,8 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, break; case BUCK2: if (mode == EXTPIN) { - b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs; - if (!b2_dvs) - goto err; - - pin1 = gpio_get_value(b2_dvs->gpio[0]); - pin2 = gpio_get_value(b2_dvs->gpio[1]); + pin1 = gpiod_get_value(buck->gpio1); + pin2 = gpiod_get_value(buck->gpio2); if (pin1 == PIN_LOW && pin2 == PIN_LOW) idx = 0; @@ -424,28 +412,28 @@ static int lp8788_dvs_gpio_request(struct platform_device *pdev, enum lp8788_buck_id id) { struct lp8788_platform_data *pdata = buck->lp->pdata; - char *b1_name = "LP8788_B1_DVS"; - char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" }; - int i, gpio, ret; + struct device *dev = &pdev->dev; switch (id) { case BUCK1: - gpio = pdata->buck1_dvs->gpio; - ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW, - b1_name); - if (ret) - return ret; + buck->gpio1 = devm_gpiod_get(dev, "dvs", GPIOD_OUT_LOW); + if (IS_ERR(buck->gpio1)) + return PTR_ERR(buck->gpio1); + gpiod_set_consumer_name(buck->gpio1, "LP8788_B1_DVS"); buck->dvs = pdata->buck1_dvs; break; case BUCK2: - for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) { - gpio = pdata->buck2_dvs->gpio[i]; - ret = devm_gpio_request_one(&pdev->dev, gpio, - DVS_LOW, b2_name[i]); - if (ret) - return ret; - } + buck->gpio1 = devm_gpiod_get_index(dev, "dvs", 0, GPIOD_OUT_LOW); + if (IS_ERR(buck->gpio1)) + return PTR_ERR(buck->gpio1); + gpiod_set_consumer_name(buck->gpio1, "LP8788_B2_DVS1"); + + buck->gpio2 = devm_gpiod_get_index(dev, "dvs", 1, GPIOD_OUT_LOW); + if (IS_ERR(buck->gpio1)) + return PTR_ERR(buck->gpio1); + gpiod_set_consumer_name(buck->gpio1, "LP8788_B2_DVS2"); + buck->dvs = pdata->buck2_dvs; break; default: diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 8d5193207552..f8bb6828feef 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -20,9 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/max8973-regulator.h> #include <linux/regulator/of_regulator.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> -#include <linux/of_gpio.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/regmap.h> @@ -102,7 +100,7 @@ struct max8973_chip { struct regulator_desc desc; struct regmap *regmap; bool enable_external_control; - int dvs_gpio; + struct gpio_desc *dvs_gpiod; int lru_index[MAX8973_MAX_VOUT_REG]; int curr_vout_val[MAX8973_MAX_VOUT_REG]; int curr_vout_reg; @@ -184,7 +182,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev, * If gpios are available to select the VOUT register then least * recently used register for new configuration. */ - if (gpio_is_valid(max->dvs_gpio)) + if (max->dvs_gpiod) found = find_voltage_set_register(max, vsel, &vout_reg, &gpio_val); @@ -201,8 +199,8 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev, } /* Select proper VOUT register vio gpios */ - if (gpio_is_valid(max->dvs_gpio)) { - gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1); + if (max->dvs_gpiod) { + gpiod_set_value_cansleep(max->dvs_gpiod, gpio_val & 0x1); max->curr_gpio_val = gpio_val; } return 0; @@ -531,7 +529,6 @@ static struct max8973_regulator_platform_data *max8973_parse_dt( pdata->enable_ext_control = of_property_read_bool(np, "maxim,externally-enable"); - pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0); ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval); if (!ret) @@ -612,13 +609,17 @@ static int max8973_probe(struct i2c_client *client) return -EIO; } - if (pdata->dvs_gpio == -EPROBE_DEFER) - return -EPROBE_DEFER; - max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL); if (!max) return -ENOMEM; + max->dvs_gpiod = devm_gpiod_get_optional(&client->dev, "maxim,dvs", + (pdata->dvs_def_state) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); + if (IS_ERR(max->dvs_gpiod)) + return dev_err_probe(&client->dev, PTR_ERR(max->dvs_gpiod), + "failed to obtain dvs gpio\n"); + gpiod_set_consumer_name(max->dvs_gpiod, "max8973-dvs"); + max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config); if (IS_ERR(max->regmap)) { ret = PTR_ERR(max->regmap); @@ -663,7 +664,6 @@ static int max8973_probe(struct i2c_client *client) max->desc.ramp_delay_table = max8973_buck_ramp_table; max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table); - max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL; max->enable_external_control = pdata->enable_ext_control; max->curr_gpio_val = pdata->dvs_def_state; max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state; @@ -671,21 +671,9 @@ static int max8973_probe(struct i2c_client *client) max->lru_index[0] = max->curr_vout_reg; - if (gpio_is_valid(max->dvs_gpio)) { - int gpio_flags; + if (max->dvs_gpiod) { int i; - gpio_flags = (pdata->dvs_def_state) ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; - ret = devm_gpio_request_one(&client->dev, max->dvs_gpio, - gpio_flags, "max8973-dvs"); - if (ret) { - dev_err(&client->dev, - "gpio_request for gpio %d failed, err = %d\n", - max->dvs_gpio, ret); - return ret; - } - /* * Initialize the lru index with vout_reg id * The index 0 will be most recently used and diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c index 0b38eaa73597..5f201ee9a5b8 100644 --- a/drivers/regulator/max8997-regulator.c +++ b/drivers/regulator/max8997-regulator.c @@ -9,8 +9,7 @@ #include <linux/bug.h> #include <linux/err.h> -#include <linux/gpio.h> -#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -32,7 +31,7 @@ struct max8997_data { u8 buck1_vol[8]; u8 buck2_vol[8]; u8 buck5_vol[8]; - int buck125_gpios[3]; + struct gpio_desc *buck125_gpiods[3]; int buck125_gpioindex; bool ignore_gpiodvs_side_effect; @@ -52,9 +51,9 @@ static inline void max8997_set_gpio(struct max8997_data *max8997) int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; - gpio_set_value(max8997->buck125_gpios[0], set1); - gpio_set_value(max8997->buck125_gpios[1], set2); - gpio_set_value(max8997->buck125_gpios[2], set3); + gpiod_set_value(max8997->buck125_gpiods[0], set1); + gpiod_set_value(max8997->buck125_gpiods[1], set2); + gpiod_set_value(max8997->buck125_gpiods[2], set3); } struct voltage_map_desc { @@ -873,31 +872,13 @@ static struct regulator_desc regulators[] = { }; #ifdef CONFIG_OF -static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev, - struct max8997_platform_data *pdata, - struct device_node *pmic_np) -{ - int i, gpio; - - for (i = 0; i < 3; i++) { - gpio = of_get_named_gpio(pmic_np, - "max8997,pmic-buck125-dvs-gpios", i); - if (!gpio_is_valid(gpio)) { - dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio); - return -EINVAL; - } - pdata->buck125_gpios[i] = gpio; - } - return 0; -} - static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, struct max8997_platform_data *pdata) { struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct device_node *pmic_np, *regulators_np, *reg_np; struct max8997_regulator_data *rdata; - unsigned int i, dvs_voltage_nr = 1, ret; + unsigned int i, dvs_voltage_nr = 1; pmic_np = iodev->dev->of_node; if (!pmic_np) { @@ -949,10 +930,6 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || pdata->buck5_gpiodvs) { - ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np); - if (ret) - return -EINVAL; - if (of_property_read_u32(pmic_np, "max8997,pmic-buck125-default-dvs-idx", &pdata->buck125_default_idx)) { @@ -1039,7 +1016,6 @@ static int max8997_pmic_probe(struct platform_device *pdev) max8997->buck1_gpiodvs = pdata->buck1_gpiodvs; max8997->buck2_gpiodvs = pdata->buck2_gpiodvs; max8997->buck5_gpiodvs = pdata->buck5_gpiodvs; - memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3); max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect; nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || @@ -1110,38 +1086,27 @@ static int max8997_pmic_probe(struct platform_device *pdev) */ if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || pdata->buck5_gpiodvs) { + const char *gpio_names[3] = {"MAX8997 SET1", "MAX8997 SET2", "MAX8997 SET3"}; - if (!gpio_is_valid(pdata->buck125_gpios[0]) || - !gpio_is_valid(pdata->buck125_gpios[1]) || - !gpio_is_valid(pdata->buck125_gpios[2])) { - dev_err(&pdev->dev, "GPIO NOT VALID\n"); - return -EINVAL; - } + for (i = 0; i < 3; i++) { + enum gpiod_flags flags; - ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0], - "MAX8997 SET1"); - if (ret) - return ret; - - ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1], - "MAX8997 SET2"); - if (ret) - return ret; - - ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2], - "MAX8997 SET3"); - if (ret) - return ret; - - gpio_direction_output(pdata->buck125_gpios[0], - (max8997->buck125_gpioindex >> 2) - & 0x1); /* SET1 */ - gpio_direction_output(pdata->buck125_gpios[1], - (max8997->buck125_gpioindex >> 1) - & 0x1); /* SET2 */ - gpio_direction_output(pdata->buck125_gpios[2], - (max8997->buck125_gpioindex >> 0) - & 0x1); /* SET3 */ + if (max8997->buck125_gpioindex & BIT(2 - i)) + flags = GPIOD_OUT_HIGH; + else + flags = GPIOD_OUT_LOW; + + max8997->buck125_gpiods[i] = devm_gpiod_get_index(iodev->dev, + "max8997,pmic-buck125-dvs", + i, + flags); + if (IS_ERR(max8997->buck125_gpiods[i])) { + ret = PTR_ERR(max8997->buck125_gpiods[i]); + return dev_err_probe(iodev->dev, ret, "cant get GPIO %d (%d)\n", + i, ret); + } + gpiod_set_consumer_name(max8997->buck125_gpiods[i], gpio_names[i]); + } } /* DVS-GPIO disabled */ diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index fadb4717384a..254a77887f66 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -10,12 +10,12 @@ #include <linux/init.h> #include <linux/i2c.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/bits.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/of_regulator.h> @@ -31,6 +31,9 @@ struct max8998_data { unsigned int buck1_idx; /* index to last changed voltage */ /* value in a set */ unsigned int buck2_idx; + struct gpio_desc *buck1_gpio1; + struct gpio_desc *buck1_gpio2; + struct gpio_desc *buck2_gpio; }; static const unsigned int charger_current_table[] = { @@ -227,15 +230,15 @@ static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev, return ret; } -static inline void buck1_gpio_set(int gpio1, int gpio2, int v) +static inline void buck1_gpio_set(struct gpio_desc *gpio1, struct gpio_desc *gpio2, int v) { - gpio_set_value(gpio1, v & 0x1); - gpio_set_value(gpio2, (v >> 1) & 0x1); + gpiod_set_value(gpio1, v & 0x1); + gpiod_set_value(gpio2, (v >> 1) & 0x1); } -static inline void buck2_gpio_set(int gpio, int v) +static inline void buck2_gpio_set(struct gpio_desc *gpio, int v) { - gpio_set_value(gpio, v & 0x1); + gpiod_set_value(gpio, v & 0x1); } static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev, @@ -260,16 +263,15 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev, selector, max8998->buck1_vol[0], max8998->buck1_vol[1], max8998->buck1_vol[2], max8998->buck1_vol[3]); - if (gpio_is_valid(pdata->buck1_set1) && - gpio_is_valid(pdata->buck1_set2)) { + if (max8998->buck1_gpio1 && max8998->buck1_gpio2) { /* check if requested voltage */ /* value is already defined */ for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) { if (max8998->buck1_vol[j] == selector) { max8998->buck1_idx = j; - buck1_gpio_set(pdata->buck1_set1, - pdata->buck1_set2, j); + buck1_gpio_set(max8998->buck1_gpio1, + max8998->buck1_gpio2, j); goto buck1_exit; } } @@ -286,13 +288,13 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev, &shift, &mask); ret = max8998_write_reg(i2c, reg, selector); - buck1_gpio_set(pdata->buck1_set1, - pdata->buck1_set2, max8998->buck1_idx); + buck1_gpio_set(max8998->buck1_gpio1, + max8998->buck1_gpio2, max8998->buck1_idx); buck1_last_val++; buck1_exit: dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n", - i2c->name, gpio_get_value(pdata->buck1_set1), - gpio_get_value(pdata->buck1_set2)); + i2c->name, gpiod_get_value(max8998->buck1_gpio1), + gpiod_get_value(max8998->buck1_gpio2)); break; } else { ret = max8998_write_reg(i2c, reg, selector); @@ -303,14 +305,13 @@ buck1_exit: dev_dbg(max8998->dev, "BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n", selector, max8998->buck2_vol[0], max8998->buck2_vol[1]); - if (gpio_is_valid(pdata->buck2_set3)) { - + if (max8998->buck2_gpio) { /* check if requested voltage */ /* value is already defined */ for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) { if (max8998->buck2_vol[j] == selector) { max8998->buck2_idx = j; - buck2_gpio_set(pdata->buck2_set3, j); + buck2_gpio_set(max8998->buck2_gpio, j); goto buck2_exit; } } @@ -322,10 +323,10 @@ buck1_exit: ®, &shift, &mask); ret = max8998_write_reg(i2c, reg, selector); max8998->buck2_vol[max8998->buck2_idx] = selector; - buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx); + buck2_gpio_set(max8998->buck2_gpio, max8998->buck2_idx); buck2_exit: dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name, - gpio_get_value(pdata->buck2_set3)); + gpiod_get_value(max8998->buck2_gpio)); } else { ret = max8998_write_reg(i2c, reg, selector); } @@ -539,36 +540,6 @@ static const struct regulator_desc regulators[] = { charger_current_table, MAX8998_REG_CHGR1, 0x7), }; -static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev, - struct max8998_platform_data *pdata, - struct device_node *pmic_np) -{ - int gpio; - - gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0); - if (!gpio_is_valid(gpio)) { - dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio); - return -EINVAL; - } - pdata->buck1_set1 = gpio; - - gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1); - if (!gpio_is_valid(gpio)) { - dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio); - return -EINVAL; - } - pdata->buck1_set2 = gpio; - - gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0); - if (!gpio_is_valid(gpio)) { - dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio); - return -EINVAL; - } - pdata->buck2_set3 = gpio; - - return 0; -} - static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, struct max8998_platform_data *pdata) { @@ -614,10 +585,6 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev, of_node_put(reg_np); of_node_put(regulators_np); - ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); - if (ret) - return -EINVAL; - pdata->buck_voltage_lock = of_property_read_bool(pmic_np, "max8998,pmic-buck-voltage-lock"); ret = of_property_read_u32(pmic_np, @@ -665,6 +632,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) struct regulator_dev *rdev; struct max8998_data *max8998; struct i2c_client *i2c; + enum gpiod_flags flags; int i, ret; unsigned int v; @@ -693,37 +661,38 @@ static int max8998_pmic_probe(struct platform_device *pdev) max8998->buck1_idx = pdata->buck1_default_idx; max8998->buck2_idx = pdata->buck2_default_idx; - /* NOTE: */ - /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */ - /* will be displayed */ - /* Check if MAX8998 voltage selection GPIOs are defined */ - if (gpio_is_valid(pdata->buck1_set1) && - gpio_is_valid(pdata->buck1_set2)) { - /* Check if SET1 is not equal to 0 */ - if (!pdata->buck1_set1) { - dev_err(&pdev->dev, - "MAX8998 SET1 GPIO defined as 0 !\n"); - WARN_ON(!pdata->buck1_set1); - return -EIO; - } - /* Check if SET2 is not equal to 0 */ - if (!pdata->buck1_set2) { - dev_err(&pdev->dev, - "MAX8998 SET2 GPIO defined as 0 !\n"); - WARN_ON(!pdata->buck1_set2); - return -EIO; - } - - gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1"); - gpio_direction_output(pdata->buck1_set1, - max8998->buck1_idx & 0x1); - - - gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2"); - gpio_direction_output(pdata->buck1_set2, - (max8998->buck1_idx >> 1) & 0x1); - + flags = (max8998->buck1_idx & BIT(0)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + max8998->buck1_gpio1 = devm_gpiod_get_index_optional(iodev->dev, + "max8998,pmic-buck1-dvs", + 0, + flags); + if (IS_ERR(max8998->buck1_gpio1)) + return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck1_gpio1), + "could not get BUCK1 GPIO1\n"); + gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK1_SET1"); + + flags = (max8998->buck1_idx & BIT(1)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + max8998->buck1_gpio2 = devm_gpiod_get_index_optional(iodev->dev, + "max8998,pmic-buck1-dvs", + 1, + flags); + if (IS_ERR(max8998->buck1_gpio2)) + return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck1_gpio2), + "could not get BUCK1 GPIO2\n"); + gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK1_SET2"); + + flags = (max8998->buck2_idx & BIT(0)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW; + max8998->buck2_gpio = devm_gpiod_get_index_optional(iodev->dev, + "max8998,pmic-buck2-dvs", + 0, + flags); + if (IS_ERR(max8998->buck2_gpio)) + return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck2_gpio), + "could not get BUCK2 GPIO\n"); + gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK2_SET3"); + + if (max8998->buck1_gpio1 && max8998->buck1_gpio2) { /* Set predefined values for BUCK1 registers */ for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) { int index = MAX8998_BUCK1 - MAX8998_LDO2; @@ -742,18 +711,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) } } - if (gpio_is_valid(pdata->buck2_set3)) { - /* Check if SET3 is not equal to 0 */ - if (!pdata->buck2_set3) { - dev_err(&pdev->dev, - "MAX8998 SET3 GPIO defined as 0 !\n"); - WARN_ON(!pdata->buck2_set3); - return -EIO; - } - gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3"); - gpio_direction_output(pdata->buck2_set3, - max8998->buck2_idx & 0x1); - + if (max8998->buck2_gpio) { /* Set predefined values for BUCK2 registers */ for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) { int index = MAX8998_BUCK2 - MAX8998_LDO2; diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c index 53d1b9d6f69c..86a626a4f610 100644 --- a/drivers/regulator/userspace-consumer.c +++ b/drivers/regulator/userspace-consumer.c @@ -208,6 +208,7 @@ static const struct of_device_id regulator_userspace_consumer_of_match[] = { { .compatible = "regulator-output", }, {}, }; +MODULE_DEVICE_TABLE(of, regulator_userspace_consumer_of_match); static struct platform_driver regulator_userspace_consumer_driver = { .probe = regulator_userspace_consumer_probe, |