summaryrefslogtreecommitdiff
path: root/drivers/rtc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/Kconfig')
-rw-r--r--drivers/rtc/Kconfig139
1 files changed, 111 insertions, 28 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f15cddfeb897..cedb41c95dae 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -153,6 +153,17 @@ config RTC_DRV_88PM80X
This driver can also be built as a module. If so, the module
will be called rtc-88pm80x.
+config RTC_DRV_ABB5ZES3
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
+ help
+ If you say yes here you get support for the Abracon
+ AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ab-b5ze-s3.
+
config RTC_DRV_AS3722
tristate "ams AS3722 RTC driver"
depends on MFD_AS3722
@@ -790,6 +801,96 @@ config RTC_DRV_DS1553
This driver can also be built as a module. If so, the module
will be called rtc-ds1553.
+config RTC_DRV_DS1685_FAMILY
+ tristate "Dallas/Maxim DS1685 Family"
+ help
+ If you say yes here you get support for the Dallas/Maxim DS1685
+ family of real time chips. This family includes the DS1685/DS1687,
+ DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
+ DS17885/DS17887 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1685.
+
+choice
+ prompt "Subtype"
+ depends on RTC_DRV_DS1685_FAMILY
+ default RTC_DRV_DS1685
+
+config RTC_DRV_DS1685
+ bool "DS1685/DS1687"
+ help
+ This enables support for the Dallas/Maxim DS1685/DS1687 real time
+ clock chip.
+
+ This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
+ systems, as well as EPPC-405-UC modules by electronic system design
+ GmbH.
+
+config RTC_DRV_DS1689
+ bool "DS1689/DS1693"
+ help
+ This enables support for the Dallas/Maxim DS1689/DS1693 real time
+ clock chip.
+
+ This is an older RTC chip, supplanted by the DS1685/DS1687 above,
+ which supports a few minor features such as Vcc, Vbat, and Power
+ Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
+
+ It also works for the even older DS1688/DS1691 RTC chips, which are
+ virtually the same and carry the same model number. Both chips
+ have 114 bytes of user NVRAM.
+
+config RTC_DRV_DS17285
+ bool "DS17285/DS17287"
+ help
+ This enables support for the Dallas/Maxim DS17285/DS17287 real time
+ clock chip.
+
+ This chip features 2kb of extended NV-SRAM. It may possibly be
+ found in some SGI O2 systems (rare).
+
+config RTC_DRV_DS17485
+ bool "DS17485/DS17487"
+ help
+ This enables support for the Dallas/Maxim DS17485/DS17487 real time
+ clock chip.
+
+ This chip features 4kb of extended NV-SRAM.
+
+config RTC_DRV_DS17885
+ bool "DS17885/DS17887"
+ help
+ This enables support for the Dallas/Maxim DS17885/DS17887 real time
+ clock chip.
+
+ This chip features 8kb of extended NV-SRAM.
+
+endchoice
+
+config RTC_DS1685_PROC_REGS
+ bool "Display register values in /proc"
+ depends on RTC_DRV_DS1685_FAMILY && PROC_FS
+ help
+ Enable this to display a readout of all of the RTC registers in
+ /proc/drivers/rtc. Keep in mind that this can potentially lead
+ to lost interrupts, as reading Control Register C will clear
+ all pending IRQ flags.
+
+ Unless you are debugging this driver, choose N.
+
+config RTC_DS1685_SYSFS_REGS
+ bool "SysFS access to RTC register bits"
+ depends on RTC_DRV_DS1685_FAMILY && SYSFS
+ help
+ Enable this to provide access to the RTC control register bits
+ in /sys. Some of the bits are read-write, others are read-only.
+
+ Keep in mind that reading Control C's bits automatically clears
+ all pending IRQ flags - this can cause lost interrupts.
+
+ If you know that you need access to these bits, choose Y, Else N.
+
config RTC_DRV_DS1742
tristate "Maxim/Dallas DS1742/1743"
depends on HAS_IOMEM
@@ -1141,34 +1242,6 @@ config RTC_DRV_AT91SAM9
probably want to use the real RTC block instead of the "RTT as an
RTC" driver.
-config RTC_DRV_AT91SAM9_RTT
- int
- range 0 1
- default 0
- depends on RTC_DRV_AT91SAM9
- help
- This option is only relevant for legacy board support and
- won't be used when booting a DT board.
-
- More than one RTT module is available. You can choose which
- one will be used as an RTC. The default of zero is normally
- OK to use, though some systems use that for non-RTC purposes.
-
-config RTC_DRV_AT91SAM9_GPBR
- int
- range 0 3
- default 0
- prompt "Backup Register Number"
- depends on RTC_DRV_AT91SAM9
- help
- This option is only relevant for legacy board support and
- won't be used when booting a DT board.
-
- The RTC driver needs to use one of the General Purpose Backup
- Registers (GPBRs) as well as the RTT. You can choose which one
- will be used. The default of zero is normally OK to use, but
- on some systems other software needs to use that register.
-
config RTC_DRV_AU1XXX
tristate "Au1xxx Counter0 RTC support"
depends on MIPS_ALCHEMY
@@ -1269,6 +1342,16 @@ config RTC_DRV_MV
This driver can also be built as a module. If so, the module
will be called rtc-mv.
+config RTC_DRV_ARMADA38X
+ tristate "Armada 38x Marvell SoC RTC"
+ depends on ARCH_MVEBU
+ help
+ If you say yes here you will get support for the in-chip RTC
+ that can be found in the Armada 38x Marvell's SoC device
+
+ This driver can also be built as a module. If so, the module
+ will be called armada38x-rtc.
+
config RTC_DRV_PS3
tristate "PS3 RTC"
depends on PPC_PS3