summaryrefslogtreecommitdiff
path: root/drivers/sbus/char/bpp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sbus/char/bpp.c')
-rw-r--r--drivers/sbus/char/bpp.c1079
1 files changed, 1079 insertions, 0 deletions
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
new file mode 100644
index 000000000000..8f0f46907a81
--- /dev/null
+++ b/drivers/sbus/char/bpp.c
@@ -0,0 +1,1079 @@
+/*
+ * drivers/sbus/char/bpp.c
+ *
+ * Copyright (c) 1995 Picture Elements
+ * Stephen Williams (steve@icarus.com)
+ * Gus Baldauf (gbaldauf@ix.netcom.com)
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/devfs_fs_kernel.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#if defined(__i386__)
+# include <asm/system.h>
+#endif
+
+#if defined(__sparc__)
+# include <linux/init.h>
+# include <linux/delay.h> /* udelay() */
+
+# include <asm/oplib.h> /* OpenProm Library */
+# include <asm/sbus.h>
+#endif
+
+#include <asm/bpp.h>
+
+#define BPP_PROBE_CODE 0x55
+#define BPP_DELAY 100
+
+static const unsigned BPP_MAJOR = LP_MAJOR;
+static const char* dev_name = "bpp";
+
+/* When switching from compatibility to a mode where I can read, try
+ the following mode first. */
+
+/* const unsigned char DEFAULT_ECP = 0x10; */
+static const unsigned char DEFAULT_ECP = 0x30;
+static const unsigned char DEFAULT_NIBBLE = 0x00;
+
+/*
+ * These are 1284 time constraints, in units of jiffies.
+ */
+
+static const unsigned long TIME_PSetup = 1;
+static const unsigned long TIME_PResponse = 6;
+static const unsigned long TIME_IDLE_LIMIT = 2000;
+
+/*
+ * One instance per supported subdevice...
+ */
+# define BPP_NO 3
+
+enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
+
+struct inst {
+ unsigned present : 1; /* True if the hardware exists */
+ unsigned enhanced : 1; /* True if the hardware in "enhanced" */
+ unsigned opened : 1; /* True if the device is opened already */
+ unsigned run_flag : 1; /* True if waiting for a repeate byte */
+
+ unsigned char direction; /* 0 --> out, 0x20 --> IN */
+ unsigned char pp_state; /* State of host controlled pins. */
+ enum IEEE_Mode mode;
+
+ unsigned char run_length;
+ unsigned char repeat_byte;
+
+ /* These members manage timeouts for programmed delays */
+ wait_queue_head_t wait_queue;
+ struct timer_list timer_list;
+};
+
+static struct inst instances[BPP_NO];
+
+#if defined(__i386__)
+
+static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
+
+/*
+ * These are for data access.
+ * Control lines accesses are hidden in set_bits() and get_bits().
+ * The exception is the probe procedure, which is system-dependent.
+ */
+#define bpp_outb_p(data, base) outb_p((data), (base))
+#define bpp_inb(base) inb(base)
+#define bpp_inb_p(base) inb_p(base)
+
+/*
+ * This method takes the pin values mask and sets the hardware pins to
+ * the requested value: 1 == high voltage, 0 == low voltage. This
+ * burries the annoying PC bit inversion and preserves the direction
+ * flag.
+ */
+static void set_pins(unsigned short pins, unsigned minor)
+{
+ unsigned char bits = instances[minor].direction; /* == 0x20 */
+
+ if (! (pins & BPP_PP_nStrobe)) bits |= 1;
+ if (! (pins & BPP_PP_nAutoFd)) bits |= 2;
+ if ( pins & BPP_PP_nInit) bits |= 4;
+ if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
+
+ instances[minor].pp_state = bits;
+
+ outb_p(bits, base_addrs[minor]+2);
+}
+
+static unsigned short get_pins(unsigned minor)
+{
+ unsigned short bits = 0;
+
+ unsigned value = instances[minor].pp_state;
+ if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
+ if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
+ if (value & 0x04) bits |= BPP_PP_nInit;
+ if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
+
+ value = inb_p(base_addrs[minor]+1);
+ if (value & 0x08) bits |= BPP_GP_nFault;
+ if (value & 0x10) bits |= BPP_GP_Select;
+ if (value & 0x20) bits |= BPP_GP_PError;
+ if (value & 0x40) bits |= BPP_GP_nAck;
+ if (! (value & 0x80)) bits |= BPP_GP_Busy;
+
+ return bits;
+}
+
+#endif /* __i386__ */
+
+#if defined(__sparc__)
+
+/*
+ * Register block
+ */
+ /* DMA registers */
+#define BPP_CSR 0x00
+#define BPP_ADDR 0x04
+#define BPP_BCNT 0x08
+#define BPP_TST_CSR 0x0C
+ /* Parallel Port registers */
+#define BPP_HCR 0x10
+#define BPP_OCR 0x12
+#define BPP_DR 0x14
+#define BPP_TCR 0x15
+#define BPP_OR 0x16
+#define BPP_IR 0x17
+#define BPP_ICR 0x18
+#define BPP_SIZE 0x1A
+
+/* BPP_CSR. Bits of type RW1 are cleared with writting '1'. */
+#define P_DEV_ID_MASK 0xf0000000 /* R */
+#define P_DEV_ID_ZEBRA 0x40000000
+#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */
+#define P_NA_LOADED 0x08000000 /* R NA wirtten but was not used */
+#define P_A_LOADED 0x04000000 /* R */
+#define P_DMA_ON 0x02000000 /* R DMA is not disabled */
+#define P_EN_NEXT 0x01000000 /* RW */
+#define P_TCI_DIS 0x00800000 /* RW TCI forbidden from interrupts */
+#define P_DIAG 0x00100000 /* RW Disables draining and resetting
+ of P-FIFO on loading of P_ADDR*/
+#define P_BURST_SIZE 0x000c0000 /* RW SBus burst size */
+#define P_BURST_8 0x00000000
+#define P_BURST_4 0x00040000
+#define P_BURST_1 0x00080000 /* "No burst" write */
+#define P_TC 0x00004000 /* RW1 Term Count, can be cleared when
+ P_EN_NEXT=1 */
+#define P_EN_CNT 0x00002000 /* RW */
+#define P_EN_DMA 0x00000200 /* RW */
+#define P_WRITE 0x00000100 /* R DMA dir, 1=to ram, 0=to port */
+#define P_RESET 0x00000080 /* RW */
+#define P_SLAVE_ERR 0x00000040 /* RW1 Access size error */
+#define P_INVALIDATE 0x00000020 /* W Drop P-FIFO */
+#define P_INT_EN 0x00000010 /* RW OK to P_INT_PEND||P_ERR_PEND */
+#define P_DRAINING 0x0000000c /* R P-FIFO is draining to memory */
+#define P_ERR_PEND 0x00000002 /* R */
+#define P_INT_PEND 0x00000001 /* R */
+
+/* BPP_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */
+#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */
+#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */
+
+/* BPP_OCR. */
+#define P_OCR_MEM_CLR 0x8000
+#define P_OCR_DATA_SRC 0x4000 /* ) */
+#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */
+#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */
+#define P_OCR_ACK_DSEL 0x0800 /* ) */
+#define P_OCR_EN_DIAG 0x0400
+#define P_OCR_BUSY_OP 0x0200 /* Busy operation */
+#define P_OCR_ACK_OP 0x0100 /* Ack operation */
+#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */
+
+/* BPP_TCR */
+#define P_TCR_DIR 0x08
+#define P_TCR_BUSY 0x04
+#define P_TCR_ACK 0x02
+#define P_TCR_DS 0x01 /* Strobe */
+
+/* BPP_OR */
+#define P_OR_V3 0x20 /* ) */
+#define P_OR_V2 0x10 /* ) on Zebra only */
+#define P_OR_V1 0x08 /* ) */
+#define P_OR_INIT 0x04
+#define P_OR_AFXN 0x02 /* Auto Feed */
+#define P_OR_SLCT_IN 0x01
+
+/* BPP_IR */
+#define P_IR_PE 0x04
+#define P_IR_SLCT 0x02
+#define P_IR_ERR 0x01
+
+/* BPP_ICR */
+#define P_DS_IRQ 0x8000 /* RW1 */
+#define P_ACK_IRQ 0x4000 /* RW1 */
+#define P_BUSY_IRQ 0x2000 /* RW1 */
+#define P_PE_IRQ 0x1000 /* RW1 */
+#define P_SLCT_IRQ 0x0800 /* RW1 */
+#define P_ERR_IRQ 0x0400 /* RW1 */
+#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */
+#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */
+#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */
+#define P_BUSY_IRQ_EN 0x0040 /* RW */
+#define P_PE_IRP 0x0020 /* RW 1= rising edge */
+#define P_PE_IRQ_EN 0x0010 /* RW */
+#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */
+#define P_SLCT_IRQ_EN 0x0004 /* RW */
+#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */
+#define P_ERR_IRQ_EN 0x0001 /* RW */
+
+static void __iomem *base_addrs[BPP_NO];
+
+#define bpp_outb_p(data, base) sbus_writeb(data, (base) + BPP_DR)
+#define bpp_inb_p(base) sbus_readb((base) + BPP_DR)
+#define bpp_inb(base) sbus_readb((base) + BPP_DR)
+
+static void set_pins(unsigned short pins, unsigned minor)
+{
+ void __iomem *base = base_addrs[minor];
+ unsigned char bits_tcr = 0, bits_or = 0;
+
+ if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
+ if ( pins & BPP_PP_nStrobe) bits_tcr |= P_TCR_DS;
+
+ if ( pins & BPP_PP_nAutoFd) bits_or |= P_OR_AFXN;
+ if (! (pins & BPP_PP_nInit)) bits_or |= P_OR_INIT;
+ if (! (pins & BPP_PP_nSelectIn)) bits_or |= P_OR_SLCT_IN;
+
+ sbus_writeb(bits_or, base + BPP_OR);
+ sbus_writeb(bits_tcr, base + BPP_TCR);
+}
+
+/*
+ * i386 people read output pins from a software image.
+ * We may get them back from hardware.
+ * Again, inversion of pins must he buried here.
+ */
+static unsigned short get_pins(unsigned minor)
+{
+ void __iomem *base = base_addrs[minor];
+ unsigned short bits = 0;
+ unsigned value_tcr = sbus_readb(base + BPP_TCR);
+ unsigned value_ir = sbus_readb(base + BPP_IR);
+ unsigned value_or = sbus_readb(base + BPP_OR);
+
+ if (value_tcr & P_TCR_DS) bits |= BPP_PP_nStrobe;
+ if (value_or & P_OR_AFXN) bits |= BPP_PP_nAutoFd;
+ if (! (value_or & P_OR_INIT)) bits |= BPP_PP_nInit;
+ if (! (value_or & P_OR_SLCT_IN)) bits |= BPP_PP_nSelectIn;
+
+ if (value_ir & P_IR_ERR) bits |= BPP_GP_nFault;
+ if (! (value_ir & P_IR_SLCT)) bits |= BPP_GP_Select;
+ if (! (value_ir & P_IR_PE)) bits |= BPP_GP_PError;
+ if (! (value_tcr & P_TCR_ACK)) bits |= BPP_GP_nAck;
+ if (value_tcr & P_TCR_BUSY) bits |= BPP_GP_Busy;
+
+ return bits;
+}
+
+#endif /* __sparc__ */
+
+static void bpp_wake_up(unsigned long val)
+{ wake_up(&instances[val].wait_queue); }
+
+static void snooze(unsigned long snooze_time, unsigned minor)
+{
+ init_timer(&instances[minor].timer_list);
+ instances[minor].timer_list.expires = jiffies + snooze_time + 1;
+ instances[minor].timer_list.data = minor;
+ add_timer(&instances[minor].timer_list);
+ sleep_on (&instances[minor].wait_queue);
+}
+
+static int wait_for(unsigned short set, unsigned short clr,
+ unsigned long delay, unsigned minor)
+{
+ unsigned short pins = get_pins(minor);
+
+ unsigned long extime = 0;
+
+ /*
+ * Try a real fast scan for the first jiffy, in case the device
+ * responds real good. The first while loop guesses an expire
+ * time accounting for possible wraparound of jiffies.
+ */
+ while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
+ while ( (time_before(jiffies, extime))
+ && (((pins & set) != set) || ((pins & clr) != 0)) ) {
+ pins = get_pins(minor);
+ }
+
+ delay -= 1;
+
+ /*
+ * If my delay expired or the pins are still not where I want
+ * them, then resort to using the timer and greatly reduce my
+ * sample rate. If the peripheral is going to be slow, this will
+ * give the CPU up to some more worthy process.
+ */
+ while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
+
+ snooze(1, minor);
+ pins = get_pins(minor);
+ delay -= 1;
+ }
+
+ if (delay == 0) return -1;
+ else return pins;
+}
+
+/*
+ * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
+ * errno means something broke, and I do not yet know how to fix it.
+ */
+static int negotiate(unsigned char mode, unsigned minor)
+{
+ int rc;
+ unsigned short pins = get_pins(minor);
+ if (pins & BPP_PP_nSelectIn) return -EIO;
+
+
+ /* Event 0: Write the mode to the data lines */
+ bpp_outb_p(mode, base_addrs[minor]);
+
+ snooze(TIME_PSetup, minor);
+
+ /* Event 1: Strobe the mode code into the peripheral */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+ /* Wait for Event 2: Peripheral responds as a 1284 device. */
+ rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
+ BPP_GP_nAck,
+ TIME_PResponse,
+ minor);
+
+ if (rc == -1) return -ETIMEDOUT;
+
+ /* Event 3: latch extensibility request */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
+
+ /* ... quick nap while peripheral ponders the byte i'm sending...*/
+ snooze(1, minor);
+
+ /* Event 4: restore strobe, to ACK peripheral's response. */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+ /* Wait for Event 6: Peripheral latches response bits */
+ rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
+ if (rc == -1) return -EIO;
+
+ /* A 1284 device cannot refuse nibble mode */
+ if (mode == DEFAULT_NIBBLE) return 0;
+
+ if (pins & BPP_GP_Select) return 0;
+
+ return -EPROTONOSUPPORT;
+}
+
+static int terminate(unsigned minor)
+{
+ int rc;
+
+ /* Event 22: Request termination of 1284 mode */
+ set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+ /* Wait for Events 23 and 24: ACK termination request. */
+ rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
+ BPP_GP_nAck,
+ TIME_PSetup+TIME_PResponse,
+ minor);
+
+ instances[minor].direction = 0;
+ instances[minor].mode = COMPATIBILITY;
+
+ if (rc == -1) {
+ return -EIO;
+ }
+
+ /* Event 25: Handshake by lowering nAutoFd */
+ set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+ /* Event 26: Peripheral wiggles lines... */
+
+ /* Event 27: Peripheral sets nAck HIGH to ack handshake */
+ rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+ if (rc == -1) {
+ set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+ return -EIO;
+ }
+
+ /* Event 28: Finish phase by raising nAutoFd */
+ set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
+
+ return 0;
+}
+
+static DEFINE_SPINLOCK(bpp_open_lock);
+
+/*
+ * Allow only one process to open the device at a time.
+ */
+static int bpp_open(struct inode *inode, struct file *f)
+{
+ unsigned minor = iminor(inode);
+ int ret;
+
+ spin_lock(&bpp_open_lock);
+ ret = 0;
+ if (minor >= BPP_NO) {
+ ret = -ENODEV;
+ } else {
+ if (! instances[minor].present) {
+ ret = -ENODEV;
+ } else {
+ if (instances[minor].opened)
+ ret = -EBUSY;
+ else
+ instances[minor].opened = 1;
+ }
+ }
+ spin_unlock(&bpp_open_lock);
+
+ return ret;
+}
+
+/*
+ * When the process closes the device, this method is called to clean
+ * up and reset the hardware. Always leave the device in compatibility
+ * mode as this is a reasonable place to clean up from messes made by
+ * ioctls, or other mayhem.
+ */
+static int bpp_release(struct inode *inode, struct file *f)
+{
+ unsigned minor = iminor(inode);
+
+ spin_lock(&bpp_open_lock);
+ instances[minor].opened = 0;
+
+ if (instances[minor].mode != COMPATIBILITY)
+ terminate(minor);
+
+ spin_unlock(&bpp_open_lock);
+
+ return 0;
+}
+
+static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
+{
+ unsigned long remaining = cnt;
+ long rc;
+
+ while (remaining > 0) {
+ unsigned char byte = 0;
+ int pins;
+
+ /* Event 7: request nibble */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
+
+ /* Wait for event 9: Peripher strobes first nibble */
+ pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
+ if (pins == -1) return -ETIMEDOUT;
+
+ /* Event 10: I handshake nibble */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
+ if (pins & BPP_GP_nFault) byte |= 0x01;
+ if (pins & BPP_GP_Select) byte |= 0x02;
+ if (pins & BPP_GP_PError) byte |= 0x04;
+ if (pins & BPP_GP_Busy) byte |= 0x08;
+
+ /* Wait for event 11: Peripheral handshakes nibble */
+ rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+
+ /* Event 7: request nibble */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
+
+ /* Wait for event 9: Peripher strobes first nibble */
+ pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
+ if (rc == -1) return -ETIMEDOUT;
+
+ /* Event 10: I handshake nibble */
+ set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
+ if (pins & BPP_GP_nFault) byte |= 0x10;
+ if (pins & BPP_GP_Select) byte |= 0x20;
+ if (pins & BPP_GP_PError) byte |= 0x40;
+ if (pins & BPP_GP_Busy) byte |= 0x80;
+
+ if (put_user(byte, c))
+ return -EFAULT;
+ c += 1;
+ remaining -= 1;
+
+ /* Wait for event 11: Peripheral handshakes nibble */
+ rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+ if (rc == -1) return -EIO;
+ }
+
+ return cnt - remaining;
+}
+
+static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
+{
+ unsigned long remaining;
+ long rc;
+
+ /* Turn ECP mode from forward to reverse if needed. */
+ if (! instances[minor].direction) {
+ unsigned short pins = get_pins(minor);
+
+ /* Event 38: Turn the bus around */
+ instances[minor].direction = 0x20;
+ pins &= ~BPP_PP_nAutoFd;
+ set_pins(pins, minor);
+
+ /* Event 39: Set pins for reverse mode. */
+ snooze(TIME_PSetup, minor);
+ set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
+
+ /* Wait for event 40: Peripheral ready to be strobed */
+ rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
+ if (rc == -1) return -ETIMEDOUT;
+ }
+
+ remaining = cnt;
+
+ while (remaining > 0) {
+
+ /* If there is a run length for a repeated byte, repeat */
+ /* that byte a few times. */
+ if (instances[minor].run_length && !instances[minor].run_flag) {
+
+ char buffer[128];
+ unsigned idx;
+ unsigned repeat = remaining < instances[minor].run_length
+ ? remaining
+ : instances[minor].run_length;
+
+ for (idx = 0 ; idx < repeat ; idx += 1)
+ buffer[idx] = instances[minor].repeat_byte;
+
+ if (copy_to_user(c, buffer, repeat))
+ return -EFAULT;
+ remaining -= repeat;
+ c += repeat;
+ instances[minor].run_length -= repeat;
+ }
+
+ if (remaining == 0) break;
+
+
+ /* Wait for Event 43: Data active on the bus. */
+ rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
+ if (rc == -1) break;
+
+ if (rc & BPP_GP_Busy) {
+ /* OK, this is data. read it in. */
+ unsigned char byte = bpp_inb(base_addrs[minor]);
+ if (put_user(byte, c))
+ return -EFAULT;
+ c += 1;
+ remaining -= 1;
+
+ if (instances[minor].run_flag) {
+ instances[minor].repeat_byte = byte;
+ instances[minor].run_flag = 0;
+ }
+
+ } else {
+ unsigned char byte = bpp_inb(base_addrs[minor]);
+ if (byte & 0x80) {
+ printk("bpp%d: "
+ "Ignoring ECP channel %u from device.\n",
+ minor, byte & 0x7f);
+ } else {
+ instances[minor].run_length = byte;
+ instances[minor].run_flag = 1;
+ }
+ }
+
+ /* Event 44: I got it. */
+ set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
+
+ /* Wait for event 45: peripheral handshake */
+ rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
+ if (rc == -1) return -ETIMEDOUT;
+
+ /* Event 46: Finish handshake */
+ set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
+
+ }
+
+
+ return cnt - remaining;
+}
+
+static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
+{
+ long rc;
+ unsigned minor = iminor(f->f_dentry->d_inode);
+ if (minor >= BPP_NO) return -ENODEV;
+ if (!instances[minor].present) return -ENODEV;
+
+ switch (instances[minor].mode) {
+
+ default:
+ if (instances[minor].mode != COMPATIBILITY)
+ terminate(minor);
+
+ if (instances[minor].enhanced) {
+ /* For now, do all reads with ECP-RLE mode */
+ unsigned short pins;
+
+ rc = negotiate(DEFAULT_ECP, minor);
+ if (rc < 0) break;
+
+ instances[minor].mode = ECP_RLE;
+
+ /* Event 30: set nAutoFd low to setup for ECP mode */
+ pins = get_pins(minor);
+ pins &= ~BPP_PP_nAutoFd;
+ set_pins(pins, minor);
+
+ /* Wait for Event 31: peripheral ready */
+ rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
+ if (rc == -1) return -ETIMEDOUT;
+
+ rc = read_ecp(minor, c, cnt);
+
+ } else {
+ rc = negotiate(DEFAULT_NIBBLE, minor);
+ if (rc < 0) break;
+
+ instances[minor].mode = NIBBLE;
+
+ rc = read_nibble(minor, c, cnt);
+ }
+ break;
+
+ case NIBBLE:
+ rc = read_nibble(minor, c, cnt);
+ break;
+
+ case ECP:
+ case ECP_RLE:
+ rc = read_ecp(minor, c, cnt);
+ break;
+
+ }
+
+
+ return rc;
+}
+
+/*
+ * Compatibility mode handshaking is a matter of writing data,
+ * strobing it, and waiting for the printer to stop being busy.
+ */
+static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
+{
+ long rc;
+ unsigned short pins = get_pins(minor);
+
+ unsigned long remaining = cnt;
+
+
+ while (remaining > 0) {
+ unsigned char byte;
+
+ if (get_user(byte, c))
+ return -EFAULT;
+ c += 1;
+
+ rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
+ if (rc == -1) return -ETIMEDOUT;
+
+ bpp_outb_p(byte, base_addrs[minor]);
+ remaining -= 1;
+ /* snooze(1, minor); */
+
+ pins &= ~BPP_PP_nStrobe;
+ set_pins(pins, minor);
+
+ rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
+
+ pins |= BPP_PP_nStrobe;
+ set_pins(pins, minor);
+ }
+
+ return cnt - remaining;
+}
+
+/*
+ * Write data using ECP mode. Watch out that the port may be set up
+ * for reading. If so, turn the port around.
+ */
+static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
+{
+ unsigned short pins = get_pins(minor);
+ unsigned long remaining = cnt;
+
+ if (instances[minor].direction) {
+ int rc;
+
+ /* Event 47 Request bus be turned around */
+ pins |= BPP_PP_nInit;
+ set_pins(pins, minor);
+
+ /* Wait for Event 49: Peripheral relinquished bus */
+ rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
+
+ pins |= BPP_PP_nAutoFd;
+ instances[minor].direction = 0;
+ set_pins(pins, minor);
+ }
+
+ while (remaining > 0) {
+ unsigned char byte;
+ int rc;
+
+ if (get_user(byte, c))
+ return -EFAULT;
+
+ rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
+ if (rc == -1) return -ETIMEDOUT;
+
+ c += 1;
+
+ bpp_outb_p(byte, base_addrs[minor]);
+
+ pins &= ~BPP_PP_nStrobe;
+ set_pins(pins, minor);
+
+ pins |= BPP_PP_nStrobe;
+ rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
+ if (rc == -1) return -EIO;
+
+ set_pins(pins, minor);
+ }
+
+ return cnt - remaining;
+}
+
+/*
+ * Write to the peripheral. Be sensitive of the current mode. If I'm
+ * in a mode that can be turned around (ECP) then just do
+ * that. Otherwise, terminate and do my writing in compat mode. This
+ * is the safest course as any device can handle it.
+ */
+static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
+{
+ long errno = 0;
+ unsigned minor = iminor(f->f_dentry->d_inode);
+ if (minor >= BPP_NO) return -ENODEV;
+ if (!instances[minor].present) return -ENODEV;
+
+ switch (instances[minor].mode) {
+
+ case ECP:
+ case ECP_RLE:
+ errno = write_ecp(minor, c, cnt);
+ break;
+ case COMPATIBILITY:
+ errno = write_compat(minor, c, cnt);
+ break;
+ default:
+ terminate(minor);
+ errno = write_compat(minor, c, cnt);
+ }
+
+ return errno;
+}
+
+static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
+ unsigned long arg)
+{
+ int errno = 0;
+
+ unsigned minor = iminor(inode);
+ if (minor >= BPP_NO) return -ENODEV;
+ if (!instances[minor].present) return -ENODEV;
+
+
+ switch (cmd) {
+
+ case BPP_PUT_PINS:
+ set_pins(arg, minor);
+ break;
+
+ case BPP_GET_PINS:
+ errno = get_pins(minor);
+ break;
+
+ case BPP_PUT_DATA:
+ bpp_outb_p(arg, base_addrs[minor]);
+ break;
+
+ case BPP_GET_DATA:
+ errno = bpp_inb_p(base_addrs[minor]);
+ break;
+
+ case BPP_SET_INPUT:
+ if (arg)
+ if (instances[minor].enhanced) {
+ unsigned short bits = get_pins(minor);
+ instances[minor].direction = 0x20;
+ set_pins(bits, minor);
+ } else {
+ errno = -ENOTTY;
+ }
+ else {
+ unsigned short bits = get_pins(minor);
+ instances[minor].direction = 0x00;
+ set_pins(bits, minor);
+ }
+ break;
+
+ default:
+ errno = -EINVAL;
+ }
+
+ return errno;
+}
+
+static struct file_operations bpp_fops = {
+ .owner = THIS_MODULE,
+ .read = bpp_read,
+ .write = bpp_write,
+ .ioctl = bpp_ioctl,
+ .open = bpp_open,
+ .release = bpp_release,
+};
+
+#if defined(__i386__)
+
+#define collectLptPorts() {}
+
+static void probeLptPort(unsigned idx)
+{
+ unsigned int testvalue;
+ const unsigned short lpAddr = base_addrs[idx];
+
+ instances[idx].present = 0;
+ instances[idx].enhanced = 0;
+ instances[idx].direction = 0;
+ instances[idx].mode = COMPATIBILITY;
+ instances[idx].wait_queue = 0;
+ instances[idx].run_length = 0;
+ instances[idx].run_flag = 0;
+ init_timer(&instances[idx].timer_list);
+ instances[idx].timer_list.function = bpp_wake_up;
+ if (!request_region(lpAddr,3, dev_name)) return;
+
+ /*
+ * First, make sure the instance exists. Do this by writing to
+ * the data latch and reading the value back. If the port *is*
+ * present, test to see if it supports extended-mode
+ * operation. This will be required for IEEE1284 reverse
+ * transfers.
+ */
+
+ outb_p(BPP_PROBE_CODE, lpAddr);
+ for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+ ;
+ testvalue = inb_p(lpAddr);
+ if (testvalue == BPP_PROBE_CODE) {
+ unsigned save;
+ instances[idx].present = 1;
+
+ save = inb_p(lpAddr+2);
+ for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+ ;
+ outb_p(save|0x20, lpAddr+2);
+ for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+ ;
+ outb_p(~BPP_PROBE_CODE, lpAddr);
+ for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
+ ;
+ testvalue = inb_p(lpAddr);
+ if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
+ instances[idx].enhanced = 0;
+ else
+ instances[idx].enhanced = 1;
+ outb_p(save, lpAddr+2);
+ }
+ else {
+ release_region(lpAddr,3);
+ }
+ /*
+ * Leave the port in compat idle mode.
+ */
+ set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
+
+ printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
+ instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
+}
+
+static inline void freeLptPort(int idx)
+{
+ release_region(base_addrs[idx], 3);
+}
+
+#endif
+
+#if defined(__sparc__)
+
+static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
+{
+ return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
+}
+
+static int collectLptPorts(void)
+{
+ struct sbus_bus *bus;
+ struct sbus_dev *dev;
+ int count;
+
+ count = 0;
+ for_all_sbusdev(dev, bus) {
+ if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
+ if (count >= BPP_NO) {
+ printk(KERN_NOTICE
+ "bpp: More than %d bpp ports,"
+ " rest is ignored\n", BPP_NO);
+ return count;
+ }
+ base_addrs[count] = map_bpp(dev, count);
+ count++;
+ }
+ }
+ return count;
+}
+
+static void probeLptPort(unsigned idx)
+{
+ void __iomem *rp = base_addrs[idx];
+ __u32 csr;
+ char *brand;
+
+ instances[idx].present = 0;
+ instances[idx].enhanced = 0;
+ instances[idx].direction = 0;
+ instances[idx].mode = COMPATIBILITY;
+ init_waitqueue_head(&instances[idx].wait_queue);
+ instances[idx].run_length = 0;
+ instances[idx].run_flag = 0;
+ init_timer(&instances[idx].timer_list);
+ instances[idx].timer_list.function = bpp_wake_up;
+
+ if (!rp) return;
+
+ instances[idx].present = 1;
+ instances[idx].enhanced = 1; /* Sure */
+
+ csr = sbus_readl(rp + BPP_CSR);
+ if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
+ udelay(20);
+ csr = sbus_readl(rp + BPP_CSR);
+ if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
+ printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
+ }
+ }
+ printk("bpp%d: reset with 0x%08x ..", idx, csr);
+ sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
+ udelay(500);
+ sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
+ csr = sbus_readl(rp + BPP_CSR);
+ printk(" done with csr=0x%08x ocr=0x%04x\n",
+ csr, sbus_readw(rp + BPP_OCR));
+
+ switch (csr & P_DEV_ID_MASK) {
+ case P_DEV_ID_ZEBRA:
+ brand = "Zebra";
+ break;
+ case P_DEV_ID_L64854:
+ brand = "DMA2";
+ break;
+ default:
+ brand = "Unknown";
+ }
+ printk("bpp%d: %s at %p\n", idx, brand, rp);
+
+ /*
+ * Leave the port in compat idle mode.
+ */
+ set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
+
+ return;
+}
+
+static inline void freeLptPort(int idx)
+{
+ sbus_iounmap(base_addrs[idx], BPP_SIZE);
+}
+
+#endif
+
+static int __init bpp_init(void)
+{
+ int rc;
+ unsigned idx;
+
+ rc = collectLptPorts();
+ if (rc == 0)
+ return -ENODEV;
+
+ rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops);
+ if (rc < 0)
+ return rc;
+
+ for (idx = 0; idx < BPP_NO; idx++) {
+ instances[idx].opened = 0;
+ probeLptPort(idx);
+ }
+ devfs_mk_dir("bpp");
+ for (idx = 0; idx < BPP_NO; idx++) {
+ devfs_mk_cdev(MKDEV(BPP_MAJOR, idx),
+ S_IFCHR | S_IRUSR | S_IWUSR, "bpp/%d", idx);
+ }
+
+ return 0;
+}
+
+static void __exit bpp_cleanup(void)
+{
+ unsigned idx;
+
+ for (idx = 0; idx < BPP_NO; idx++)
+ devfs_remove("bpp/%d", idx);
+ devfs_remove("bpp");
+ unregister_chrdev(BPP_MAJOR, dev_name);
+
+ for (idx = 0; idx < BPP_NO; idx++) {
+ if (instances[idx].present)
+ freeLptPort(idx);
+ }
+}
+
+module_init(bpp_init);
+module_exit(bpp_cleanup);
+
+MODULE_LICENSE("GPL");
+