summaryrefslogtreecommitdiff
path: root/drivers/scsi/atari_scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/atari_scsi.c')
-rw-r--r--drivers/scsi/atari_scsi.c144
1 files changed, 33 insertions, 111 deletions
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 78d1b2963f2c..a59ad94ea52b 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -14,55 +14,23 @@
*
*/
-
-/**************************************************************************/
-/* */
-/* Notes for Falcon SCSI: */
-/* ---------------------- */
-/* */
-/* Since the Falcon SCSI uses the ST-DMA chip, that is shared among */
-/* several device drivers, locking and unlocking the access to this */
-/* chip is required. But locking is not possible from an interrupt, */
-/* since it puts the process to sleep if the lock is not available. */
-/* This prevents "late" locking of the DMA chip, i.e. locking it just */
-/* before using it, since in case of disconnection-reconnection */
-/* commands, the DMA is started from the reselection interrupt. */
-/* */
-/* Two possible schemes for ST-DMA-locking would be: */
-/* 1) The lock is taken for each command separately and disconnecting */
-/* is forbidden (i.e. can_queue = 1). */
-/* 2) The DMA chip is locked when the first command comes in and */
-/* released when the last command is finished and all queues are */
-/* empty. */
-/* The first alternative would result in bad performance, since the */
-/* interleaving of commands would not be used. The second is unfair to */
-/* other drivers using the ST-DMA, because the queues will seldom be */
-/* totally empty if there is a lot of disk traffic. */
-/* */
-/* For this reasons I decided to employ a more elaborate scheme: */
-/* - First, we give up the lock every time we can (for fairness), this */
-/* means every time a command finishes and there are no other commands */
-/* on the disconnected queue. */
-/* - If there are others waiting to lock the DMA chip, we stop */
-/* issuing commands, i.e. moving them onto the issue queue. */
-/* Because of that, the disconnected queue will run empty in a */
-/* while. Instead we go to sleep on a 'fairness_queue'. */
-/* - If the lock is released, all processes waiting on the fairness */
-/* queue will be woken. The first of them tries to re-lock the DMA, */
-/* the others wait for the first to finish this task. After that, */
-/* they can all run on and do their commands... */
-/* This sounds complicated (and it is it :-(), but it seems to be a */
-/* good compromise between fairness and performance: As long as no one */
-/* else wants to work with the ST-DMA chip, SCSI can go along as */
-/* usual. If now someone else comes, this behaviour is changed to a */
-/* "fairness mode": just already initiated commands are finished and */
-/* then the lock is released. The other one waiting will probably win */
-/* the race for locking the DMA, since it was waiting for longer. And */
-/* after it has finished, SCSI can go ahead again. Finally: I hope I */
-/* have not produced any deadlock possibilities! */
-/* */
-/**************************************************************************/
-
+/*
+ * Notes for Falcon SCSI DMA
+ *
+ * The 5380 device is one of several that all share the DMA chip. Hence
+ * "locking" and "unlocking" access to this chip is required.
+ *
+ * Two possible schemes for ST DMA acquisition by atari_scsi are:
+ * 1) The lock is taken for each command separately (i.e. can_queue == 1).
+ * 2) The lock is taken when the first command arrives and released
+ * when the last command is finished (i.e. can_queue > 1).
+ *
+ * The first alternative limits SCSI bus utilization, since interleaving
+ * commands is not possible. The second gives better performance but is
+ * unfair to other drivers needing to use the ST DMA chip. In order to
+ * allow the IDE and floppy drivers equal access to the ST DMA chip
+ * the default is can_queue == 1.
+ */
#include <linux/module.h>
#include <linux/types.h>
@@ -83,13 +51,10 @@
#include <scsi/scsi_host.h>
-/* Definitions for the core NCR5380 driver. */
-
-#define REAL_DMA
-#define SUPPORT_TAGS
-#define MAX_TAGS 32
#define DMA_MIN_SIZE 32
+/* Definitions for the core NCR5380 driver. */
+
#define NCR5380_implementation_fields /* none */
#define NCR5380_read(reg) atari_scsi_reg_read(reg)
@@ -99,9 +64,9 @@
#define NCR5380_abort atari_scsi_abort
#define NCR5380_info atari_scsi_info
-#define NCR5380_dma_read_setup(instance, data, count) \
+#define NCR5380_dma_recv_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 0)
-#define NCR5380_dma_write_setup(instance, data, count) \
+#define NCR5380_dma_send_setup(instance, data, count) \
atari_scsi_dma_setup(instance, data, count, 1)
#define NCR5380_dma_residual(instance) \
atari_scsi_dma_residual(instance)
@@ -159,14 +124,11 @@ static inline unsigned long SCSI_DMA_GETADR(void)
return adr;
}
-#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
-#endif
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
-#ifdef REAL_DMA
static unsigned long atari_dma_residual, atari_dma_startaddr;
static short atari_dma_active;
/* pointer to the dribble buffer */
@@ -185,7 +147,6 @@ static char *atari_dma_orig_addr;
/* mask for address bits that can't be used with the ST-DMA */
static unsigned long atari_dma_stram_mask;
#define STRAM_ADDR(a) (((a) & atari_dma_stram_mask) == 0)
-#endif
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
@@ -193,16 +154,12 @@ static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
-static int setup_use_tagged_queuing = -1;
-module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
static int setup_toshiba_delay = -1;
module_param(setup_toshiba_delay, int, 0);
-#if defined(REAL_DMA)
-
static int scsi_dma_is_ignored_buserr(unsigned char dma_stat)
{
int i;
@@ -255,12 +212,9 @@ static void scsi_dma_buserr(int irq, void *dummy)
}
#endif
-#endif
-
static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
-#ifdef REAL_DMA
struct Scsi_Host *instance = dev;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
@@ -342,8 +296,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
tt_scsi_dma.dma_ctrl = 0;
}
-#endif /* REAL_DMA */
-
NCR5380_intr(irq, dev);
return IRQ_HANDLED;
@@ -352,7 +304,6 @@ static irqreturn_t scsi_tt_intr(int irq, void *dev)
static irqreturn_t scsi_falcon_intr(int irq, void *dev)
{
-#ifdef REAL_DMA
struct Scsi_Host *instance = dev;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
@@ -405,15 +356,12 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dev)
atari_dma_orig_addr = NULL;
}
-#endif /* REAL_DMA */
-
NCR5380_intr(irq, dev);
return IRQ_HANDLED;
}
-#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void)
{
int nr;
@@ -436,7 +384,6 @@ static void atari_scsi_fetch_restbytes(void)
*dst++ = *src++;
}
}
-#endif /* REAL_DMA */
/* This function releases the lock on the DMA chip if there is no
@@ -464,6 +411,10 @@ static int falcon_get_lock(struct Scsi_Host *instance)
if (IS_A_TT())
return 1;
+ if (stdma_is_locked_by(scsi_falcon_intr) &&
+ instance->hostt->can_queue > 1)
+ return 1;
+
if (in_interrupt())
return stdma_try_lock(scsi_falcon_intr, instance);
@@ -495,8 +446,7 @@ static int __init atari_scsi_setup(char *str)
setup_sg_tablesize = ints[3];
if (ints[0] >= 4)
setup_hostid = ints[4];
- if (ints[0] >= 5)
- setup_use_tagged_queuing = ints[5];
+ /* ints[5] (use_tagged_queuing) is ignored */
/* ints[6] (use_pdma) is ignored */
if (ints[0] >= 7)
setup_toshiba_delay = ints[7];
@@ -508,8 +458,6 @@ __setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
-#if defined(REAL_DMA)
-
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
void *data, unsigned long count,
int dir)
@@ -545,9 +493,6 @@ static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
*/
dma_cache_maintenance(addr, count, dir);
- if (count == 0)
- printk(KERN_NOTICE "SCSI warning: DMA programmed for 0 bytes !\n");
-
if (IS_A_TT()) {
tt_scsi_dma.dma_ctrl = dir;
SCSI_DMA_WRITE_P(dma_addr, addr);
@@ -624,6 +569,9 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
{
unsigned long possible_len, limit;
+ if (wanted_len < DMA_MIN_SIZE)
+ return 0;
+
if (IS_A_TT())
/* TT SCSI DMA can transfer arbitrary #bytes */
return wanted_len;
@@ -703,9 +651,6 @@ static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
}
-#endif /* REAL_DMA */
-
-
/* NCR5380 register access functions
*
* There are separate functions for TT and Falcon, because the access
@@ -736,7 +681,7 @@ static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value)
}
-#include "atari_NCR5380.c"
+#include "NCR5380.c"
static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
{
@@ -745,7 +690,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
local_irq_save(flags);
-#ifdef REAL_DMA
/* Abort a maybe active DMA transfer */
if (IS_A_TT()) {
tt_scsi_dma.dma_ctrl = 0;
@@ -754,7 +698,6 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
atari_dma_active = 0;
atari_dma_orig_addr = NULL;
}
-#endif
rv = NCR5380_bus_reset(cmd);
@@ -781,6 +724,7 @@ static struct scsi_host_template atari_scsi_template = {
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
+ .cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
};
@@ -804,24 +748,11 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
atari_scsi_reg_write = atari_scsi_falcon_reg_write;
}
- /* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary.
- * Higher values should work, too; try it!
- * (But cmd_per_lun costs memory!)
- *
- * But there seems to be a bug somewhere that requires CAN_QUEUE to be
- * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
- * changed CMD_PER_LUN...
- *
- * Note: The Falcon currently uses 8/1 setting due to unsolved problems
- * with cmd_per_lun != 1
- */
if (ATARIHW_PRESENT(TT_SCSI)) {
atari_scsi_template.can_queue = 16;
- atari_scsi_template.cmd_per_lun = 8;
atari_scsi_template.sg_tablesize = SG_ALL;
} else {
- atari_scsi_template.can_queue = 8;
- atari_scsi_template.cmd_per_lun = 1;
+ atari_scsi_template.can_queue = 1;
atari_scsi_template.sg_tablesize = SG_NONE;
}
@@ -850,8 +781,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
}
}
-
-#ifdef REAL_DMA
/* If running on a Falcon and if there's TT-Ram (i.e., more than one
* memory block, since there's always ST-Ram in a Falcon), then
* allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers
@@ -867,7 +796,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
atari_dma_orig_addr = 0;
}
-#endif
instance = scsi_host_alloc(&atari_scsi_template,
sizeof(struct NCR5380_hostdata));
@@ -879,9 +807,6 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
instance->irq = irq->start;
host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-#ifdef SUPPORT_TAGS
- host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
-#endif
host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
error = NCR5380_init(instance, host_flags);
@@ -897,7 +822,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
goto fail_irq;
}
tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
-#ifdef REAL_DMA
+
tt_scsi_dma.dma_ctrl = 0;
atari_dma_residual = 0;
@@ -919,17 +844,14 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
hostdata->read_overruns = 4;
}
-#endif
} else {
/* Nothing to do for the interrupt: the ST-DMA is initialized
* already.
*/
-#ifdef REAL_DMA
atari_dma_residual = 0;
atari_dma_active = 0;
atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
: 0xff000000);
-#endif
}
NCR5380_maybe_reset_bus(instance);