diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 95 |
1 files changed, 79 insertions, 16 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 25ba20e42825..6eb4085a3a22 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term * + * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2016 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * @@ -30,6 +30,7 @@ #include <linux/kthread.h> #include <linux/pci.h> #include <linux/spinlock.h> +#include <linux/sched/clock.h> #include <linux/ctype.h> #include <linux/aer.h> #include <linux/slab.h> @@ -5189,16 +5190,25 @@ static void lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba, struct lpfc_acqe_link *acqe_link) { - switch (bf_get(lpfc_acqe_link_fault, acqe_link)) { - case LPFC_ASYNC_LINK_FAULT_NONE: - case LPFC_ASYNC_LINK_FAULT_LOCAL: - case LPFC_ASYNC_LINK_FAULT_REMOTE: - case LPFC_ASYNC_LINK_FAULT_LR_LRR: + switch (bf_get(lpfc_acqe_fc_la_att_type, acqe_link)) { + case LPFC_FC_LA_TYPE_LINK_DOWN: + case LPFC_FC_LA_TYPE_TRUNKING_EVENT: + case LPFC_FC_LA_TYPE_ACTIVATE_FAIL: + case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT: break; default: - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, - "0398 Unknown link fault code: x%x\n", - bf_get(lpfc_acqe_link_fault, acqe_link)); + switch (bf_get(lpfc_acqe_link_fault, acqe_link)) { + case LPFC_ASYNC_LINK_FAULT_NONE: + case LPFC_ASYNC_LINK_FAULT_LOCAL: + case LPFC_ASYNC_LINK_FAULT_REMOTE: + case LPFC_ASYNC_LINK_FAULT_LR_LRR: + break; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + "0398 Unknown link fault code: x%x\n", + bf_get(lpfc_acqe_link_fault, acqe_link)); + break; + } break; } } @@ -6281,6 +6291,7 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc) LPFC_MBOXQ_t *pmb; MAILBOX_t *mb; struct lpfc_mbx_read_top *la; + char *log_level; int rc; if (bf_get(lpfc_trailer_type, acqe_fc) != @@ -6312,25 +6323,70 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc) bf_get(lpfc_acqe_fc_la_port_number, acqe_fc); phba->sli4_hba.link_state.fault = bf_get(lpfc_acqe_link_fault, acqe_fc); + phba->sli4_hba.link_state.link_status = + bf_get(lpfc_acqe_fc_la_link_status, acqe_fc); - if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) == - LPFC_FC_LA_TYPE_LINK_DOWN) - phba->sli4_hba.link_state.logical_speed = 0; - else if (!phba->sli4_hba.conf_trunk) - phba->sli4_hba.link_state.logical_speed = + /* + * Only select attention types need logical speed modification to what + * was previously set. + */ + if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_LINK_UP && + phba->sli4_hba.link_state.status < LPFC_FC_LA_TYPE_ACTIVATE_FAIL) { + if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) == + LPFC_FC_LA_TYPE_LINK_DOWN) + phba->sli4_hba.link_state.logical_speed = 0; + else if (!phba->sli4_hba.conf_trunk) + phba->sli4_hba.link_state.logical_speed = bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10; + } lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "2896 Async FC event - Speed:%dGBaud Topology:x%x " "LA Type:x%x Port Type:%d Port Number:%d Logical speed:" - "%dMbps Fault:%d\n", + "%dMbps Fault:x%x Link Status:x%x\n", phba->sli4_hba.link_state.speed, phba->sli4_hba.link_state.topology, phba->sli4_hba.link_state.status, phba->sli4_hba.link_state.type, phba->sli4_hba.link_state.number, phba->sli4_hba.link_state.logical_speed, - phba->sli4_hba.link_state.fault); + phba->sli4_hba.link_state.fault, + phba->sli4_hba.link_state.link_status); + + /* + * The following attention types are informational only, providing + * further details about link status. Overwrite the value of + * link_state.status appropriately. No further action is required. + */ + if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_ACTIVATE_FAIL) { + switch (phba->sli4_hba.link_state.status) { + case LPFC_FC_LA_TYPE_ACTIVATE_FAIL: + log_level = KERN_WARNING; + phba->sli4_hba.link_state.status = + LPFC_FC_LA_TYPE_LINK_DOWN; + break; + case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT: + /* + * During bb credit recovery establishment, receiving + * this attention type is normal. Link Up attention + * type is expected to occur before this informational + * attention type so keep the Link Up status. + */ + log_level = KERN_INFO; + phba->sli4_hba.link_state.status = + LPFC_FC_LA_TYPE_LINK_UP; + break; + default: + log_level = KERN_INFO; + break; + } + lpfc_log_msg(phba, log_level, LOG_SLI, + "2992 Async FC event - Informational Link " + "Attention Type x%x\n", + bf_get(lpfc_acqe_fc_la_att_type, acqe_fc)); + return; + } + pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, @@ -13917,6 +13973,13 @@ fcponly: if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; + rc = dma_set_max_seg_size(&phba->pcidev->dev, sli4_params->sge_supp_len); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "6400 Can't set dma maximum segment size\n"); + return rc; + } + /* * Check whether the adapter supports an embedded copy of the * FCP CMD IU within the WQE for FCP_Ixxx commands. In order |