diff options
Diffstat (limited to 'drivers/soc/loongson/loongson2_pm.c')
| -rw-r--r-- | drivers/soc/loongson/loongson2_pm.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/drivers/soc/loongson/loongson2_pm.c b/drivers/soc/loongson/loongson2_pm.c new file mode 100644 index 000000000000..796add6e8b63 --- /dev/null +++ b/drivers/soc/loongson/loongson2_pm.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Loongson-2 PM Support + * + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm_wakeirq.h> +#include <linux/platform_device.h> +#include <asm/bootinfo.h> +#include <asm/suspend.h> + +#define LOONGSON2_PM1_CNT_REG 0x14 +#define LOONGSON2_PM1_STS_REG 0x0c +#define LOONGSON2_PM1_ENA_REG 0x10 +#define LOONGSON2_GPE0_STS_REG 0x28 +#define LOONGSON2_GPE0_ENA_REG 0x2c + +#define LOONGSON2_PM1_PWRBTN_STS BIT(8) +#define LOONGSON2_PM1_PCIEXP_WAKE_STS BIT(14) +#define LOONGSON2_PM1_WAKE_STS BIT(15) +#define LOONGSON2_PM1_CNT_INT_EN BIT(0) +#define LOONGSON2_PM1_PWRBTN_EN LOONGSON2_PM1_PWRBTN_STS + +static struct loongson2_pm { + void __iomem *base; + struct input_dev *dev; + bool suspended; +} loongson2_pm; + +#define loongson2_pm_readw(reg) readw(loongson2_pm.base + reg) +#define loongson2_pm_readl(reg) readl(loongson2_pm.base + reg) +#define loongson2_pm_writew(val, reg) writew(val, loongson2_pm.base + reg) +#define loongson2_pm_writel(val, reg) writel(val, loongson2_pm.base + reg) + +static void loongson2_pm_status_clear(void) +{ + u16 value; + + value = loongson2_pm_readw(LOONGSON2_PM1_STS_REG); + value |= (LOONGSON2_PM1_PWRBTN_STS | LOONGSON2_PM1_PCIEXP_WAKE_STS | + LOONGSON2_PM1_WAKE_STS); + loongson2_pm_writew(value, LOONGSON2_PM1_STS_REG); + loongson2_pm_writel(loongson2_pm_readl(LOONGSON2_GPE0_STS_REG), LOONGSON2_GPE0_STS_REG); +} + +static void loongson2_pm_irq_enable(void) +{ + u16 value; + + value = loongson2_pm_readw(LOONGSON2_PM1_CNT_REG); + value |= LOONGSON2_PM1_CNT_INT_EN; + loongson2_pm_writew(value, LOONGSON2_PM1_CNT_REG); + + value = loongson2_pm_readw(LOONGSON2_PM1_ENA_REG); + value |= LOONGSON2_PM1_PWRBTN_EN; + loongson2_pm_writew(value, LOONGSON2_PM1_ENA_REG); +} + +static int loongson2_suspend_enter(suspend_state_t state) +{ + loongson2_pm_status_clear(); + loongarch_common_suspend(); + loongarch_suspend_enter(); + loongarch_common_resume(); + loongson2_pm_irq_enable(); + pm_set_resume_via_firmware(); + + return 0; +} + +static int loongson2_suspend_begin(suspend_state_t state) +{ + pm_set_suspend_via_firmware(); + + return 0; +} + +static int loongson2_suspend_valid_state(suspend_state_t state) +{ + return (state == PM_SUSPEND_MEM); +} + +static const struct platform_suspend_ops loongson2_suspend_ops = { + .valid = loongson2_suspend_valid_state, + .begin = loongson2_suspend_begin, + .enter = loongson2_suspend_enter, +}; + +static int loongson2_power_button_init(struct device *dev, int irq) +{ + int ret; + struct input_dev *button; + + button = input_allocate_device(); + if (!dev) + return -ENOMEM; + + button->name = "Power Button"; + button->phys = "pm/button/input0"; + button->id.bustype = BUS_HOST; + button->dev.parent = NULL; + input_set_capability(button, EV_KEY, KEY_POWER); + + ret = input_register_device(button); + if (ret) + goto free_dev; + + dev_pm_set_wake_irq(&button->dev, irq); + device_set_wakeup_capable(&button->dev, true); + device_set_wakeup_enable(&button->dev, true); + + loongson2_pm.dev = button; + dev_info(dev, "Power Button: Init successful!\n"); + + return 0; + +free_dev: + input_free_device(button); + + return ret; +} + +static irqreturn_t loongson2_pm_irq_handler(int irq, void *dev_id) +{ + u16 status = loongson2_pm_readw(LOONGSON2_PM1_STS_REG); + + if (!loongson2_pm.suspended && (status & LOONGSON2_PM1_PWRBTN_STS)) { + pr_info("Power Button pressed...\n"); + input_report_key(loongson2_pm.dev, KEY_POWER, 1); + input_sync(loongson2_pm.dev); + input_report_key(loongson2_pm.dev, KEY_POWER, 0); + input_sync(loongson2_pm.dev); + } + + loongson2_pm_status_clear(); + + return IRQ_HANDLED; +} + +static int __maybe_unused loongson2_pm_suspend(struct device *dev) +{ + loongson2_pm.suspended = true; + + return 0; +} + +static int __maybe_unused loongson2_pm_resume(struct device *dev) +{ + loongson2_pm.suspended = false; + + return 0; +} +static SIMPLE_DEV_PM_OPS(loongson2_pm_ops, loongson2_pm_suspend, loongson2_pm_resume); + +static int loongson2_pm_probe(struct platform_device *pdev) +{ + int irq, retval; + u64 suspend_addr; + struct device *dev = &pdev->dev; + + loongson2_pm.base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(loongson2_pm.base)) + return PTR_ERR(loongson2_pm.base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (!device_property_read_u64(dev, "loongson,suspend-address", &suspend_addr)) + loongson_sysconf.suspend_addr = (u64)phys_to_virt(suspend_addr); + else + dev_err(dev, "No loongson,suspend-address, could not support S3!\n"); + + if (loongson2_power_button_init(dev, irq)) + return -EINVAL; + + retval = devm_request_irq(&pdev->dev, irq, loongson2_pm_irq_handler, + IRQF_SHARED, "pm_irq", &loongson2_pm); + if (retval) + return retval; + + loongson2_pm_irq_enable(); + loongson2_pm_status_clear(); + + if (loongson_sysconf.suspend_addr) + suspend_set_ops(&loongson2_suspend_ops); + + return 0; +} + +static const struct of_device_id loongson2_pm_match[] = { + { .compatible = "loongson,ls2k0500-pmc", }, + { .compatible = "loongson,ls2k1000-pmc", }, + {}, +}; + +static struct platform_driver loongson2_pm_driver = { + .driver = { + .name = "ls2k-pm", + .pm = &loongson2_pm_ops, + .of_match_table = loongson2_pm_match, + }, + .probe = loongson2_pm_probe, +}; +module_platform_driver(loongson2_pm_driver); + +MODULE_DESCRIPTION("Loongson-2 PM driver"); +MODULE_LICENSE("GPL"); |