diff options
Diffstat (limited to 'drivers/soc/ti/wkup_m3_ipc.c')
| -rw-r--r-- | drivers/soc/ti/wkup_m3_ipc.c | 210 |
1 files changed, 204 insertions, 6 deletions
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index 2f03ced0f411..0076d467ff6b 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -7,7 +7,9 @@ * Dave Gerlach <d-gerlach@ti.com> */ +#include <linux/debugfs.h> #include <linux/err.h> +#include <linux/firmware.h> #include <linux/kernel.h> #include <linux/kthread.h> #include <linux/interrupt.h> @@ -40,12 +42,30 @@ #define M3_FW_VERSION_MASK 0xffff #define M3_WAKE_SRC_MASK 0xff +#define IPC_MEM_TYPE_SHIFT (0x0) +#define IPC_MEM_TYPE_MASK (0x7 << 0) +#define IPC_VTT_STAT_SHIFT (0x3) +#define IPC_VTT_STAT_MASK (0x1 << 3) +#define IPC_VTT_GPIO_PIN_SHIFT (0x4) +#define IPC_VTT_GPIO_PIN_MASK (0x3f << 4) +#define IPC_IO_ISOLATION_STAT_SHIFT (10) +#define IPC_IO_ISOLATION_STAT_MASK (0x1 << 10) + +#define IPC_DBG_HALT_SHIFT (11) +#define IPC_DBG_HALT_MASK (0x1 << 11) + #define M3_STATE_UNKNOWN 0 #define M3_STATE_RESET 1 #define M3_STATE_INITED 2 #define M3_STATE_MSG_FOR_LP 3 #define M3_STATE_MSG_FOR_RESET 4 +#define WKUP_M3_SD_FW_MAGIC 0x570C + +#define WKUP_M3_DMEM_START 0x80000 +#define WKUP_M3_AUXDATA_OFFSET 0x1000 +#define WKUP_M3_AUXDATA_SIZE 0xFF + static struct wkup_m3_ipc *m3_ipc_state; static const struct wkup_m3_wakeup_src wakeups[] = { @@ -66,6 +86,148 @@ static const struct wkup_m3_wakeup_src wakeups[] = { {.irq_nr = 0, .src = "Unknown"}, }; +/** + * wkup_m3_copy_aux_data - Copy auxiliary data to special region of m3 dmem + * @data - pointer to data + * @sz - size of data to copy (limit 256 bytes) + * + * Copies any additional blob of data to the wkup_m3 dmem to be used by the + * firmware + */ +static unsigned long wkup_m3_copy_aux_data(struct wkup_m3_ipc *m3_ipc, + const void *data, int sz) +{ + unsigned long aux_data_dev_addr; + void *aux_data_addr; + + aux_data_dev_addr = WKUP_M3_DMEM_START + WKUP_M3_AUXDATA_OFFSET; + aux_data_addr = rproc_da_to_va(m3_ipc->rproc, + aux_data_dev_addr, + WKUP_M3_AUXDATA_SIZE, + NULL); + memcpy(aux_data_addr, data, sz); + + return WKUP_M3_AUXDATA_OFFSET; +} + +static void wkup_m3_scale_data_fw_cb(const struct firmware *fw, void *context) +{ + unsigned long val, aux_base; + struct wkup_m3_scale_data_header hdr; + struct wkup_m3_ipc *m3_ipc = context; + struct device *dev = m3_ipc->dev; + + if (!fw) { + dev_err(dev, "Voltage scale fw name given but file missing.\n"); + return; + } + + memcpy(&hdr, fw->data, sizeof(hdr)); + + if (hdr.magic != WKUP_M3_SD_FW_MAGIC) { + dev_err(dev, "PM: Voltage Scale Data binary does not appear valid.\n"); + goto release_sd_fw; + } + + aux_base = wkup_m3_copy_aux_data(m3_ipc, fw->data + sizeof(hdr), + fw->size - sizeof(hdr)); + + val = (aux_base + hdr.sleep_offset); + val |= ((aux_base + hdr.wake_offset) << 16); + + m3_ipc->volt_scale_offsets = val; + +release_sd_fw: + release_firmware(fw); +}; + +static int wkup_m3_init_scale_data(struct wkup_m3_ipc *m3_ipc, + struct device *dev) +{ + int ret = 0; + + /* + * If no name is provided, user has already been warned, pm will + * still work so return 0 + */ + + if (!m3_ipc->sd_fw_name) + return ret; + + ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, + m3_ipc->sd_fw_name, dev, GFP_ATOMIC, + m3_ipc, wkup_m3_scale_data_fw_cb); + + return ret; +} + +#ifdef CONFIG_DEBUG_FS +static void wkup_m3_set_halt_late(bool enabled) +{ + if (enabled) + m3_ipc_state->halt = (1 << IPC_DBG_HALT_SHIFT); + else + m3_ipc_state->halt = 0; +} + +static int option_get(void *data, u64 *val) +{ + u32 *option = data; + + *val = *option; + + return 0; +} + +static int option_set(void *data, u64 val) +{ + u32 *option = data; + + *option = val; + + if (option == &m3_ipc_state->halt) { + if (val) + wkup_m3_set_halt_late(true); + else + wkup_m3_set_halt_late(false); + } + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(wkup_m3_ipc_option_fops, option_get, option_set, + "%llu\n"); + +static int wkup_m3_ipc_dbg_init(struct wkup_m3_ipc *m3_ipc) +{ + m3_ipc->dbg_path = debugfs_create_dir("wkup_m3_ipc", NULL); + + if (!m3_ipc->dbg_path) + return -EINVAL; + + (void)debugfs_create_file("enable_late_halt", 0644, + m3_ipc->dbg_path, + &m3_ipc->halt, + &wkup_m3_ipc_option_fops); + + return 0; +} + +static inline void wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc *m3_ipc) +{ + debugfs_remove_recursive(m3_ipc->dbg_path); +} +#else +static inline int wkup_m3_ipc_dbg_init(struct wkup_m3_ipc *m3_ipc) +{ + return 0; +} + +static inline void wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc *m3_ipc) +{ +} +#endif /* CONFIG_DEBUG_FS */ + static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc) { writel(AM33XX_M3_TXEV_ACK, @@ -130,6 +292,7 @@ static irqreturn_t wkup_m3_txev_handler(int irq, void *ipc_data) } m3_ipc->state = M3_STATE_INITED; + wkup_m3_init_scale_data(m3_ipc, dev); complete(&m3_ipc->sync_complete); break; case M3_STATE_MSG_FOR_RESET: @@ -215,6 +378,17 @@ static int wkup_m3_is_available(struct wkup_m3_ipc *m3_ipc) (m3_ipc->state != M3_STATE_UNKNOWN)); } +static void wkup_m3_set_vtt_gpio(struct wkup_m3_ipc *m3_ipc, int gpio) +{ + m3_ipc->vtt_conf = (1 << IPC_VTT_STAT_SHIFT) | + (gpio << IPC_VTT_GPIO_PIN_SHIFT); +} + +static void wkup_m3_set_io_isolation(struct wkup_m3_ipc *m3_ipc) +{ + m3_ipc->isolation_conf = (1 << IPC_IO_ISOLATION_STAT_SHIFT); +} + /* Public functions */ /** * wkup_m3_set_mem_type - Pass wkup_m3 which type of memory is in use @@ -280,12 +454,15 @@ static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state) switch (state) { case WKUP_M3_DEEPSLEEP: m3_power_state = IPC_CMD_DS0; + wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->volt_scale_offsets, 5); break; case WKUP_M3_STANDBY: m3_power_state = IPC_CMD_STANDBY; + wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); break; case WKUP_M3_IDLE: m3_power_state = IPC_CMD_IDLE; + wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); break; default: return 1; @@ -294,11 +471,13 @@ static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state) /* Program each required IPC register then write defaults to others */ wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->resume_addr, 0); wkup_m3_ctrl_ipc_write(m3_ipc, m3_power_state, 1); - wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type, 4); + wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type | + m3_ipc->vtt_conf | + m3_ipc->isolation_conf | + m3_ipc->halt, 4); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 3); - wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 6); wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 7); @@ -433,12 +612,13 @@ static int wkup_m3_rproc_boot_thread(void *arg) static int wkup_m3_ipc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - int irq, ret; + int irq, ret, temp; phandle rproc_phandle; struct rproc *m3_rproc; struct resource *res; struct task_struct *task; struct wkup_m3_ipc *m3_ipc; + struct device_node *np = dev->of_node; m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL); if (!m3_ipc) @@ -450,10 +630,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) return PTR_ERR(m3_ipc->ipc_mem_base); irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq resource\n"); + if (irq < 0) return irq; - } ret = devm_request_irq(dev, irq, wkup_m3_txev_handler, 0, "wkup_m3_txev", m3_ipc); @@ -496,6 +674,22 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) m3_ipc->ops = &ipc_ops; + if (!of_property_read_u32(np, "ti,vtt-gpio-pin", &temp)) { + if (temp >= 0 && temp <= 31) + wkup_m3_set_vtt_gpio(m3_ipc, temp); + else + dev_warn(dev, "Invalid VTT GPIO(%d) pin\n", temp); + } + + if (of_find_property(np, "ti,set-io-isolation", NULL)) + wkup_m3_set_io_isolation(m3_ipc); + + ret = of_property_read_string(np, "firmware-name", + &m3_ipc->sd_fw_name); + if (ret) { + dev_dbg(dev, "Voltage scaling data blob not provided from DT.\n"); + }; + /* * Wait for firmware loading completion in a thread so we * can boot the wkup_m3 as soon as it's ready without holding @@ -510,6 +704,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) goto err_put_rproc; } + wkup_m3_ipc_dbg_init(m3_ipc); + return 0; err_put_rproc: @@ -521,6 +717,8 @@ err_free_mbox: static int wkup_m3_ipc_remove(struct platform_device *pdev) { + wkup_m3_ipc_dbg_destroy(m3_ipc_state); + mbox_free_channel(m3_ipc_state->mbox); rproc_shutdown(m3_ipc_state->rproc); |