diff options
Diffstat (limited to 'drivers/spi/spi-stm32.c')
-rw-r--r-- | drivers/spi/spi-stm32.c | 270 |
1 files changed, 157 insertions, 113 deletions
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index d6598e4116bd..7ddf9db776b0 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // -// STMicroelectronics STM32 SPI Controller driver (master mode only) +// STMicroelectronics STM32 SPI Controller driver // // Copyright (C) 2017, STMicroelectronics - All Rights Reserved // Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics. @@ -117,6 +117,7 @@ #define STM32H7_SPI_CFG2_CPHA BIT(24) #define STM32H7_SPI_CFG2_CPOL BIT(25) #define STM32H7_SPI_CFG2_SSM BIT(26) +#define STM32H7_SPI_CFG2_SSIOP BIT(28) #define STM32H7_SPI_CFG2_AFCNTR BIT(31) /* STM32H7_SPI_IER bit fields */ @@ -170,6 +171,10 @@ */ #define SPI_DMA_MIN_BYTES 16 +/* STM32 SPI driver helpers */ +#define STM32_SPI_MASTER_MODE(stm32_spi) (!(stm32_spi)->device_mode) +#define STM32_SPI_DEVICE_MODE(stm32_spi) ((stm32_spi)->device_mode) + /** * struct stm32_spi_reg - stm32 SPI register & bitfield desc * @reg: register offset @@ -190,6 +195,7 @@ struct stm32_spi_reg { * @cpol: clock polarity register and polarity bit * @cpha: clock phase register and phase bit * @lsb_first: LSB transmitted first register and bit + * @cs_high: chips select active value * @br: baud rate register and bitfields * @rx: SPI RX data register * @tx: SPI TX data register @@ -201,6 +207,7 @@ struct stm32_spi_regspec { const struct stm32_spi_reg cpol; const struct stm32_spi_reg cpha; const struct stm32_spi_reg lsb_first; + const struct stm32_spi_reg cs_high; const struct stm32_spi_reg br; const struct stm32_spi_reg rx; const struct stm32_spi_reg tx; @@ -258,7 +265,7 @@ struct stm32_spi_cfg { /** * struct stm32_spi - private data of the SPI controller * @dev: driver model representation of the controller - * @master: controller master interface + * @ctrl: controller interface * @cfg: compatible configuration data * @base: virtual memory area * @clk: hw kernel clock feeding the SPI clock generator @@ -280,10 +287,11 @@ struct stm32_spi_cfg { * @dma_tx: dma channel for TX transfer * @dma_rx: dma channel for RX transfer * @phys_addr: SPI registers physical base address + * @device_mode: the controller is configured as SPI device */ struct stm32_spi { struct device *dev; - struct spi_master *master; + struct spi_controller *ctrl; const struct stm32_spi_cfg *cfg; void __iomem *base; struct clk *clk; @@ -307,6 +315,8 @@ struct stm32_spi { struct dma_chan *dma_tx; struct dma_chan *dma_rx; dma_addr_t phys_addr; + + bool device_mode; }; static const struct stm32_spi_regspec stm32f4_spi_regspec = { @@ -318,6 +328,7 @@ static const struct stm32_spi_regspec stm32f4_spi_regspec = { .cpol = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPOL }, .cpha = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPHA }, .lsb_first = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_LSBFRST }, + .cs_high = {}, .br = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_BR, STM32F4_SPI_CR1_BR_SHIFT }, .rx = { STM32F4_SPI_DR }, @@ -336,6 +347,7 @@ static const struct stm32_spi_regspec stm32h7_spi_regspec = { .cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL }, .cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA }, .lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST }, + .cs_high = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_SSIOP }, .br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR, STM32H7_SPI_CFG1_MBR_SHIFT }, @@ -437,9 +449,9 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, div = DIV_ROUND_CLOSEST(spi->clk_rate & ~0x1, speed_hz); /* - * SPI framework set xfer->speed_hz to master->max_speed_hz if - * xfer->speed_hz is greater than master->max_speed_hz, and it returns - * an error when xfer->speed_hz is lower than master->min_speed_hz, so + * SPI framework set xfer->speed_hz to ctrl->max_speed_hz if + * xfer->speed_hz is greater than ctrl->max_speed_hz, and it returns + * an error when xfer->speed_hz is lower than ctrl->min_speed_hz, so * no need to check it there. * However, we need to ensure the following calculations. */ @@ -657,9 +669,9 @@ static void stm32f4_spi_disable(struct stm32_spi *spi) } if (spi->cur_usedma && spi->dma_tx) - dmaengine_terminate_all(spi->dma_tx); + dmaengine_terminate_async(spi->dma_tx); if (spi->cur_usedma && spi->dma_rx) - dmaengine_terminate_all(spi->dma_rx); + dmaengine_terminate_async(spi->dma_rx); stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE); @@ -696,9 +708,9 @@ static void stm32h7_spi_disable(struct stm32_spi *spi) } if (spi->cur_usedma && spi->dma_tx) - dmaengine_terminate_all(spi->dma_tx); + dmaengine_terminate_async(spi->dma_tx); if (spi->cur_usedma && spi->dma_rx) - dmaengine_terminate_all(spi->dma_rx); + dmaengine_terminate_async(spi->dma_rx); stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE); @@ -714,19 +726,19 @@ static void stm32h7_spi_disable(struct stm32_spi *spi) /** * stm32_spi_can_dma - Determine if the transfer is eligible for DMA use - * @master: controller master interface + * @ctrl: controller interface * @spi_dev: pointer to the spi device * @transfer: pointer to spi transfer * * If driver has fifo and the current transfer size is greater than fifo size, * use DMA. Otherwise use DMA for transfer longer than defined DMA min bytes. */ -static bool stm32_spi_can_dma(struct spi_master *master, +static bool stm32_spi_can_dma(struct spi_controller *ctrl, struct spi_device *spi_dev, struct spi_transfer *transfer) { unsigned int dma_size; - struct stm32_spi *spi = spi_master_get_devdata(master); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); if (spi->cfg->has_fifo) dma_size = spi->fifo_size; @@ -742,12 +754,12 @@ static bool stm32_spi_can_dma(struct spi_master *master, /** * stm32f4_spi_irq_event - Interrupt handler for SPI controller events * @irq: interrupt line - * @dev_id: SPI controller master interface + * @dev_id: SPI controller ctrl interface */ static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id) { - struct spi_master *master = dev_id; - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_id; + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); u32 sr, mask = 0; bool end = false; @@ -830,14 +842,14 @@ end_irq: /** * stm32f4_spi_irq_thread - Thread of interrupt handler for SPI controller * @irq: interrupt line - * @dev_id: SPI controller master interface + * @dev_id: SPI controller interface */ static irqreturn_t stm32f4_spi_irq_thread(int irq, void *dev_id) { - struct spi_master *master = dev_id; - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_id; + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); - spi_finalize_current_transfer(master); + spi_finalize_current_transfer(ctrl); stm32f4_spi_disable(spi); return IRQ_HANDLED; @@ -846,12 +858,12 @@ static irqreturn_t stm32f4_spi_irq_thread(int irq, void *dev_id) /** * stm32h7_spi_irq_thread - Thread of interrupt handler for SPI controller * @irq: interrupt line - * @dev_id: SPI controller master interface + * @dev_id: SPI controller interface */ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) { - struct spi_master *master = dev_id; - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_id; + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); u32 sr, ier, mask; unsigned long flags; bool end = false; @@ -931,7 +943,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (end) { stm32h7_spi_disable(spi); - spi_finalize_current_transfer(master); + spi_finalize_current_transfer(ctrl); } return IRQ_HANDLED; @@ -939,13 +951,13 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) /** * stm32_spi_prepare_msg - set up the controller to transfer a single message - * @master: controller master interface + * @ctrl: controller interface * @msg: pointer to spi message */ -static int stm32_spi_prepare_msg(struct spi_master *master, +static int stm32_spi_prepare_msg(struct spi_controller *ctrl, struct spi_message *msg) { - struct stm32_spi *spi = spi_master_get_devdata(master); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); struct spi_device *spi_dev = msg->spi; struct device_node *np = spi_dev->dev.of_node; unsigned long flags; @@ -971,6 +983,11 @@ static int stm32_spi_prepare_msg(struct spi_master *master, else clrb |= spi->cfg->regs->lsb_first.mask; + if (STM32_SPI_DEVICE_MODE(spi) && spi_dev->mode & SPI_CS_HIGH) + setb |= spi->cfg->regs->cs_high.mask; + else + clrb |= spi->cfg->regs->cs_high.mask; + dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n", !!(spi_dev->mode & SPI_CPOL), !!(spi_dev->mode & SPI_CPHA), @@ -984,7 +1001,7 @@ static int stm32_spi_prepare_msg(struct spi_master *master, if (spi->cfg->set_number_of_data) { int ret; - ret = spi_split_transfers_maxwords(master, msg, + ret = spi_split_transfers_maxwords(ctrl, msg, STM32H7_SPI_TSIZE_MAX, GFP_KERNEL | GFP_DMA); if (ret) @@ -1016,7 +1033,7 @@ static void stm32f4_spi_dma_tx_cb(void *data) struct stm32_spi *spi = data; if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) { - spi_finalize_current_transfer(spi->master); + spi_finalize_current_transfer(spi->ctrl); stm32f4_spi_disable(spi); } } @@ -1031,7 +1048,7 @@ static void stm32_spi_dma_rx_cb(void *data) { struct stm32_spi *spi = data; - spi_finalize_current_transfer(spi->master); + spi_finalize_current_transfer(spi->ctrl); spi->cfg->disable(spi); } @@ -1161,7 +1178,8 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi) if (spi->tx_buf) stm32h7_spi_write_txfifo(spi); - stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); + if (STM32_SPI_MASTER_MODE(spi)) + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); writel_relaxed(ier, spi->base + STM32H7_SPI_IER); @@ -1208,7 +1226,8 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi) stm32_spi_enable(spi); - stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); + if (STM32_SPI_MASTER_MODE(spi)) + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART); } /** @@ -1302,7 +1321,7 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi, dma_submit_error: if (spi->dma_rx) - dmaengine_terminate_all(spi->dma_rx); + dmaengine_terminate_sync(spi->dma_rx); dma_desc_error: stm32_spi_clr_bits(spi, spi->cfg->regs->dma_rx_en.reg, @@ -1536,16 +1555,18 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, spi->cfg->set_bpw(spi); /* Update spi->cur_speed with real clock speed */ - mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, - spi->cfg->baud_rate_div_min, - spi->cfg->baud_rate_div_max); - if (mbr < 0) { - ret = mbr; - goto out; - } + if (STM32_SPI_MASTER_MODE(spi)) { + mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, + spi->cfg->baud_rate_div_min, + spi->cfg->baud_rate_div_max); + if (mbr < 0) { + ret = mbr; + goto out; + } - transfer->speed_hz = spi->cur_speed; - stm32_spi_set_mbr(spi, mbr); + transfer->speed_hz = spi->cur_speed; + stm32_spi_set_mbr(spi, mbr); + } comm_type = stm32_spi_communication_type(spi_dev, transfer); ret = spi->cfg->set_mode(spi, comm_type); @@ -1554,7 +1575,7 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, spi->cur_comm = comm_type; - if (spi->cfg->set_data_idleness) + if (STM32_SPI_MASTER_MODE(spi) && spi->cfg->set_data_idleness) spi->cfg->set_data_idleness(spi, transfer->len); if (spi->cur_bpw <= 8) @@ -1575,7 +1596,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, dev_dbg(spi->dev, "data frame of %d-bit, data packet of %d data frames\n", spi->cur_bpw, spi->cur_fthlv); - dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed); + if (STM32_SPI_MASTER_MODE(spi)) + dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed); dev_dbg(spi->dev, "transfer of %d bytes (%d data frames)\n", spi->cur_xferlen, nb_words); dev_dbg(spi->dev, "dma %s\n", @@ -1589,18 +1611,18 @@ out: /** * stm32_spi_transfer_one - transfer a single spi_transfer - * @master: controller master interface + * @ctrl: controller interface * @spi_dev: pointer to the spi device * @transfer: pointer to spi transfer * * It must return 0 if the transfer is finished or 1 if the transfer is still * in progress. */ -static int stm32_spi_transfer_one(struct spi_master *master, +static int stm32_spi_transfer_one(struct spi_controller *ctrl, struct spi_device *spi_dev, struct spi_transfer *transfer) { - struct stm32_spi *spi = spi_master_get_devdata(master); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); int ret; spi->tx_buf = transfer->tx_buf; @@ -1608,8 +1630,8 @@ static int stm32_spi_transfer_one(struct spi_master *master, spi->tx_len = spi->tx_buf ? transfer->len : 0; spi->rx_len = spi->rx_buf ? transfer->len : 0; - spi->cur_usedma = (master->can_dma && - master->can_dma(master, spi_dev, transfer)); + spi->cur_usedma = (ctrl->can_dma && + ctrl->can_dma(ctrl, spi_dev, transfer)); ret = stm32_spi_transfer_one_setup(spi, spi_dev, transfer); if (ret) { @@ -1625,13 +1647,13 @@ static int stm32_spi_transfer_one(struct spi_master *master, /** * stm32_spi_unprepare_msg - relax the hardware - * @master: controller master interface + * @ctrl: controller interface * @msg: pointer to the spi message */ -static int stm32_spi_unprepare_msg(struct spi_master *master, +static int stm32_spi_unprepare_msg(struct spi_controller *ctrl, struct spi_message *msg) { - struct stm32_spi *spi = spi_master_get_devdata(master); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); spi->cfg->disable(spi); @@ -1670,12 +1692,13 @@ static int stm32f4_spi_config(struct stm32_spi *spi) } /** - * stm32h7_spi_config - Configure SPI controller as SPI master + * stm32h7_spi_config - Configure SPI controller * @spi: pointer to the spi controller data structure */ static int stm32h7_spi_config(struct stm32_spi *spi) { unsigned long flags; + u32 cr1 = 0, cfg2 = 0; spin_lock_irqsave(&spi->lock, flags); @@ -1683,24 +1706,28 @@ static int stm32h7_spi_config(struct stm32_spi *spi) stm32_spi_clr_bits(spi, STM32H7_SPI_I2SCFGR, STM32H7_SPI_I2SCFGR_I2SMOD); - /* - * - SS input value high - * - transmitter half duplex direction - * - automatic communication suspend when RX-Fifo is full - */ - stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SSI | - STM32H7_SPI_CR1_HDDIR | - STM32H7_SPI_CR1_MASRX); + if (STM32_SPI_DEVICE_MODE(spi)) { + /* Use native device select */ + cfg2 &= ~STM32H7_SPI_CFG2_SSM; + } else { + /* + * - Transmitter half duplex direction + * - Automatic communication suspend when RX-Fifo is full + * - SS input value high + */ + cr1 |= STM32H7_SPI_CR1_HDDIR | STM32H7_SPI_CR1_MASRX | STM32H7_SPI_CR1_SSI; - /* - * - Set the master mode (default Motorola mode) - * - Consider 1 master/n slaves configuration and - * SS input value is determined by the SSI bit - * - keep control of all associated GPIOs - */ - stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_MASTER | - STM32H7_SPI_CFG2_SSM | - STM32H7_SPI_CFG2_AFCNTR); + /* + * - Set the master mode (default Motorola mode) + * - Consider 1 master/n devices configuration and + * SS input value is determined by the SSI bit + * - keep control of all associated GPIOs + */ + cfg2 |= STM32H7_SPI_CFG2_MASTER | STM32H7_SPI_CFG2_SSM | STM32H7_SPI_CFG2_AFCNTR; + } + + stm32_spi_set_bits(spi, STM32H7_SPI_CR1, cr1); + stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, cfg2); spin_unlock_irqrestore(&spi->lock, flags); @@ -1756,24 +1783,38 @@ static const struct of_device_id stm32_spi_of_match[] = { }; MODULE_DEVICE_TABLE(of, stm32_spi_of_match); +static int stm32h7_spi_device_abort(struct spi_controller *ctrl) +{ + spi_finalize_current_transfer(ctrl); + return 0; +} + static int stm32_spi_probe(struct platform_device *pdev) { - struct spi_master *master; + struct spi_controller *ctrl; struct stm32_spi *spi; struct resource *res; struct reset_control *rst; + struct device_node *np = pdev->dev.of_node; + bool device_mode; int ret; - master = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi)); - if (!master) { - dev_err(&pdev->dev, "spi master allocation failed\n"); + device_mode = of_property_read_bool(np, "spi-slave"); + + if (device_mode) + ctrl = devm_spi_alloc_slave(&pdev->dev, sizeof(struct stm32_spi)); + else + ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi)); + if (!ctrl) { + dev_err(&pdev->dev, "spi controller allocation failed\n"); return -ENOMEM; } - platform_set_drvdata(pdev, master); + platform_set_drvdata(pdev, ctrl); - spi = spi_master_get_devdata(master); + spi = spi_controller_get_devdata(ctrl); spi->dev = &pdev->dev; - spi->master = master; + spi->ctrl = ctrl; + spi->device_mode = device_mode; spin_lock_init(&spi->lock); spi->cfg = (const struct stm32_spi_cfg *) @@ -1794,7 +1835,7 @@ static int stm32_spi_probe(struct platform_device *pdev) ret = devm_request_threaded_irq(&pdev->dev, spi->irq, spi->cfg->irq_handler_event, spi->cfg->irq_handler_thread, - IRQF_ONESHOT, pdev->name, master); + IRQF_ONESHOT, pdev->name, ctrl); if (ret) { dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq, ret); @@ -1843,19 +1884,21 @@ static int stm32_spi_probe(struct platform_device *pdev) goto err_clk_disable; } - master->dev.of_node = pdev->dev.of_node; - master->auto_runtime_pm = true; - master->bus_num = pdev->id; - master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST | - SPI_3WIRE; - master->bits_per_word_mask = spi->cfg->get_bpw_mask(spi); - master->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min; - master->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max; - master->use_gpio_descriptors = true; - master->prepare_message = stm32_spi_prepare_msg; - master->transfer_one = stm32_spi_transfer_one; - master->unprepare_message = stm32_spi_unprepare_msg; - master->flags = spi->cfg->flags; + ctrl->dev.of_node = pdev->dev.of_node; + ctrl->auto_runtime_pm = true; + ctrl->bus_num = pdev->id; + ctrl->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST | + SPI_3WIRE; + ctrl->bits_per_word_mask = spi->cfg->get_bpw_mask(spi); + ctrl->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min; + ctrl->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max; + ctrl->use_gpio_descriptors = true; + ctrl->prepare_message = stm32_spi_prepare_msg; + ctrl->transfer_one = stm32_spi_transfer_one; + ctrl->unprepare_message = stm32_spi_unprepare_msg; + ctrl->flags = spi->cfg->flags; + if (STM32_SPI_DEVICE_MODE(spi)) + ctrl->slave_abort = stm32h7_spi_device_abort; spi->dma_tx = dma_request_chan(spi->dev, "tx"); if (IS_ERR(spi->dma_tx)) { @@ -1866,7 +1909,7 @@ static int stm32_spi_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "failed to request tx dma channel\n"); } else { - master->dma_tx = spi->dma_tx; + ctrl->dma_tx = spi->dma_tx; } spi->dma_rx = dma_request_chan(spi->dev, "rx"); @@ -1878,11 +1921,11 @@ static int stm32_spi_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "failed to request rx dma channel\n"); } else { - master->dma_rx = spi->dma_rx; + ctrl->dma_rx = spi->dma_rx; } if (spi->dma_tx || spi->dma_rx) - master->can_dma = stm32_spi_can_dma; + ctrl->can_dma = stm32_spi_can_dma; pm_runtime_set_autosuspend_delay(&pdev->dev, STM32_SPI_AUTOSUSPEND_DELAY); @@ -1891,9 +1934,9 @@ static int stm32_spi_probe(struct platform_device *pdev) pm_runtime_get_noresume(&pdev->dev); pm_runtime_enable(&pdev->dev); - ret = spi_register_master(master); + ret = spi_register_controller(ctrl); if (ret) { - dev_err(&pdev->dev, "spi master registration failed: %d\n", + dev_err(&pdev->dev, "spi controller registration failed: %d\n", ret); goto err_pm_disable; } @@ -1901,7 +1944,8 @@ static int stm32_spi_probe(struct platform_device *pdev) pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); - dev_info(&pdev->dev, "driver initialized\n"); + dev_info(&pdev->dev, "driver initialized (%s mode)\n", + STM32_SPI_MASTER_MODE(spi) ? "master" : "device"); return 0; @@ -1923,12 +1967,12 @@ err_clk_disable: static void stm32_spi_remove(struct platform_device *pdev) { - struct spi_master *master = platform_get_drvdata(pdev); - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = platform_get_drvdata(pdev); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); pm_runtime_get_sync(&pdev->dev); - spi_unregister_master(master); + spi_unregister_controller(ctrl); spi->cfg->disable(spi); pm_runtime_disable(&pdev->dev); @@ -1936,10 +1980,10 @@ static void stm32_spi_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); - if (master->dma_tx) - dma_release_channel(master->dma_tx); - if (master->dma_rx) - dma_release_channel(master->dma_rx); + if (ctrl->dma_tx) + dma_release_channel(ctrl->dma_tx); + if (ctrl->dma_rx) + dma_release_channel(ctrl->dma_rx); clk_disable_unprepare(spi->clk); @@ -1949,8 +1993,8 @@ static void stm32_spi_remove(struct platform_device *pdev) static int __maybe_unused stm32_spi_runtime_suspend(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_get_drvdata(dev); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); clk_disable_unprepare(spi->clk); @@ -1959,8 +2003,8 @@ static int __maybe_unused stm32_spi_runtime_suspend(struct device *dev) static int __maybe_unused stm32_spi_runtime_resume(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_get_drvdata(dev); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); int ret; ret = pinctrl_pm_select_default_state(dev); @@ -1972,10 +2016,10 @@ static int __maybe_unused stm32_spi_runtime_resume(struct device *dev) static int __maybe_unused stm32_spi_suspend(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); + struct spi_controller *ctrl = dev_get_drvdata(dev); int ret; - ret = spi_master_suspend(master); + ret = spi_controller_suspend(ctrl); if (ret) return ret; @@ -1984,15 +2028,15 @@ static int __maybe_unused stm32_spi_suspend(struct device *dev) static int __maybe_unused stm32_spi_resume(struct device *dev) { - struct spi_master *master = dev_get_drvdata(dev); - struct stm32_spi *spi = spi_master_get_devdata(master); + struct spi_controller *ctrl = dev_get_drvdata(dev); + struct stm32_spi *spi = spi_controller_get_devdata(ctrl); int ret; ret = pm_runtime_force_resume(dev); if (ret) return ret; - ret = spi_master_resume(master); + ret = spi_controller_resume(ctrl); if (ret) { clk_disable_unprepare(spi->clk); return ret; |