summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-test.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-test.h')
-rw-r--r--drivers/spi/spi-test.h136
1 files changed, 136 insertions, 0 deletions
diff --git a/drivers/spi/spi-test.h b/drivers/spi/spi-test.h
new file mode 100644
index 000000000000..922c52833239
--- /dev/null
+++ b/drivers/spi/spi-test.h
@@ -0,0 +1,136 @@
+/*
+ * linux/drivers/spi/spi-test.h
+ *
+ * (c) Martin Sperl <kernel@martin.sperl.org>
+ *
+ * spi_test definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spi/spi.h>
+
+#define SPI_TEST_MAX_TRANSFERS 4
+#define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE)
+#define SPI_TEST_MAX_ITERATE 32
+
+/* the "dummy" start addresses used in spi_test
+ * these addresses get translated at a later stage
+ */
+#define RX_START BIT(30)
+#define TX_START BIT(31)
+#define RX(off) ((void *)(RX_START + off))
+#define TX(off) ((void *)(TX_START + off))
+
+/* some special defines for offsets */
+#define SPI_TEST_MAX_SIZE_HALF BIT(29)
+
+/* detection pattern for unfinished reads...
+ * - 0x00 or 0xff could be valid levels for tx_buf = NULL,
+ * so we do not use either of them
+ */
+#define SPI_TEST_PATTERN_UNWRITTEN 0xAA
+#define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55
+#define SPI_TEST_CHECK_DO_NOT_WRITE 64
+
+/**
+ * struct spi_test - describes a specific (set of) tests to execute
+ *
+ * @description: description of the test
+ *
+ * @msg: a template @spi_message usedfor the default settings
+ * @transfers: array of @spi_transfers that are part of the
+ * resulting spi_message. The first transfer with len == 0
+ * signifies the end of the list
+ * @transfer_count: normally computed number of transfers with len > 0
+ *
+ * @run_test: run a specific spi_test - this allows to override
+ * the default implementation of @spi_test_run_transfer
+ * either to add some custom filters for a specific test
+ * or to effectively run some very custom tests...
+ * @execute_msg: run the spi_message for real - this allows to override
+ * @spi_test_execute_msg to apply final modifications
+ * on the spi_message
+ * @expected_return: the expected return code - in some cases we want to
+ * test also for error conditions
+ *
+ * @iterate_len: list of length to iterate on (in addition to the
+ * explicitly set @spi_transfer.len)
+ * @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
+ * for all values in the below range if set.
+ * the ranges are:
+ * [0 : @spi_master.dma_alignment[ if set
+ * [0 : iterate_tx_align[ if unset
+ * @iterate_rx_align: change the alignment of @spi_transfer.rx_buf
+ * see @iterate_tx_align for details
+ * @iterate_transfer_mask: the bitmask of transfers to which the iterations
+ * apply - if 0, then it applies to all transfer
+ *
+ * @fill_option: define the way how tx_buf is filled
+ * @fill_pattern: fill pattern to apply to the tx_buf
+ * (used in some of the @fill_options)
+ */
+
+struct spi_test {
+ char description[64];
+ struct spi_message msg;
+ struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS];
+ unsigned int transfer_count;
+ int (*run_test)(struct spi_device *spi, struct spi_test *test,
+ void *tx, void *rx);
+ int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
+ void *tx, void *rx);
+ int expected_return;
+ /* iterate over all the non-zero values */
+ int iterate_len[SPI_TEST_MAX_ITERATE];
+ int iterate_tx_align;
+ int iterate_rx_align;
+ u32 iterate_transfer_mask;
+ /* the tx-fill operation */
+ u32 fill_option;
+#define FILL_MEMSET_8 0 /* just memset with 8 bit */
+#define FILL_MEMSET_16 1 /* just memset with 16 bit */
+#define FILL_MEMSET_24 2 /* just memset with 24 bit */
+#define FILL_MEMSET_32 3 /* just memset with 32 bit */
+#define FILL_COUNT_8 4 /* fill with a 8 byte counter */
+#define FILL_COUNT_16 5 /* fill with a 16 bit counter */
+#define FILL_COUNT_24 6 /* fill with a 24 bit counter */
+#define FILL_COUNT_32 7 /* fill with a 32 bit counter */
+#define FILL_TRANSFER_BYTE_8 8 /* fill with the transfer byte - 8 bit */
+#define FILL_TRANSFER_BYTE_16 9 /* fill with the transfer byte - 16 bit */
+#define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */
+#define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
+#define FILL_TRANSFER_NUM 16 /* fill with the transfer number */
+ u32 fill_pattern;
+};
+
+/* default implementation for @spi_test.run_test */
+int spi_test_run_test(struct spi_device *spi,
+ const struct spi_test *test,
+ void *tx, void *rx);
+
+/* default implementation for @spi_test.execute_msg */
+int spi_test_execute_msg(struct spi_device *spi,
+ struct spi_test *test,
+ void *tx, void *rx);
+
+/* function to execute a set of tests */
+int spi_test_run_tests(struct spi_device *spi,
+ struct spi_test *tests);
+
+/* some of the default @spi_transfer.len to test */
+#define ITERATE_LEN 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
+ 1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
+
+#define ITERATE_MAX_LEN ITERATE_LEN, SPI_TEST_MAX_SIZE - 1, SPI_TEST_MAX_SIZE
+
+/* the default alignment to test */
+#define ITERATE_ALIGN sizeof(int)