diff options
Diffstat (limited to 'drivers/staging/dwc2/core.h')
-rw-r--r-- | drivers/staging/dwc2/core.h | 662 |
1 files changed, 662 insertions, 0 deletions
diff --git a/drivers/staging/dwc2/core.h b/drivers/staging/dwc2/core.h new file mode 100644 index 000000000000..fc075a7c1de5 --- /dev/null +++ b/drivers/staging/dwc2/core.h @@ -0,0 +1,662 @@ +/* + * core.h - DesignWare HS OTG Controller common declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_CORE_H__ +#define __DWC2_CORE_H__ + +#include <linux/usb/phy.h> +#include "hw.h" + +#ifdef DWC2_LOG_WRITES +static inline void do_write(u32 value, void *addr) +{ + writel(value, addr); + pr_info("INFO:: wrote %08x to %p\n", value, addr); +} + +#undef writel +#define writel(v, a) do_write(v, a) +#endif + +/* Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 + +struct dwc2_hsotg; +struct dwc2_host_chan; + +/* Device States */ +enum dwc2_lx_state { + DWC2_L0, /* On state */ + DWC2_L1, /* LPM sleep state */ + DWC2_L2, /* USB suspend state */ + DWC2_L3, /* Off state */ +}; + +/** + * struct dwc2_core_params - Parameters for configuring the core + * + * @otg_cap: Specifies the OTG capabilities. The driver will + * automatically detect the value for this parameter if + * none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + * @dma_enable: Specifies whether to use slave or DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @speed: Specifies the maximum speed of operation in host and + * device mode. The actual speed depends on the speed of + * the attached device and the value of phy_type. + * 0 - High Speed (default) + * 1 - Full Speed + * @host_support_fs_ls_low_power: Specifies whether low power mode is supported + * when attached to a Full Speed or Low Speed device in + * host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode + * when connected to a Low Speed device in host mode. This + * parameter is applicable only if + * host_support_fs_ls_low_power is enabled. If phy_type is + * set to FS then defaults to 6 MHZ otherwise 48 MHZ. + * 0 - 48 MHz + * 1 - 6 MHz + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when + * dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 (default 65,535) + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 (default 511) + * @host_channels: The number of host channel registers to use + * 1 to 16 (default 12) + * @phy_type: Specifies the type of PHY interface to use. By default, + * the driver will automatically detect the phy_type. + * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter + * is applicable for a phy_type of UTMI+ or ULPI. (For a + * ULPI phy_type, this parameter indicates the data width + * between the MAC and the ULPI Wrapper.) Also, this + * parameter is applicable only if the OTG_HSPHY_WIDTH cC + * parameter was set to "8 and 16 bits", meaning that the + * core has been configured to work at either data path + * width. + * 8 or 16 (default 16) + * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if phy_type + * is ULPI. + * 0 - single data rate ULPI interface with 8 bit wide + * data bus (default) + * 1 - double data rate ULPI interface with 4 bit wide + * data bus + * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or + * external supply to drive the VBus + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @ulpi_fs_ls: True to make ULPI phy operate in FS/LS mode only + * @ts_dline: True to enable Term Select Dline pulsing + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled + * @reload_ctl: True to allow dynamic reloading of HFIR register during + * runtime + * @ahb_single: This bit enables SINGLE transfers for remainder data in + * a transfer for DMA mode of operation. + * 0 - remainder data will be sent using INCR burst size + * 1 - remainder data will be sent using SINGLE burst size + * @otg_ver: OTG version supported + * 0 - 1.3 + * 1 - 2.0 + * + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + */ +struct dwc2_core_params { + /* + * Don't add any non-int members here, this will break + * dwc2_set_all_params! + */ + int otg_cap; + int otg_ver; + int dma_enable; + int dma_desc_enable; + int speed; + int enable_dynamic_fifo; + int en_multiple_tx_fifo; + int host_rx_fifo_size; + int host_nperio_tx_fifo_size; + int host_perio_tx_fifo_size; + int max_transfer_size; + int max_packet_count; + int host_channels; + int phy_type; + int phy_utmi_width; + int phy_ulpi_ddr; + int phy_ulpi_ext_vbus; + int i2c_enable; + int ulpi_fs_ls; + int host_support_fs_ls_low_power; + int host_ls_low_power_phy_clk; + int ts_dline; + int reload_ctl; + int ahb_single; +}; + +/** + * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic + * and periodic schedules + * + * @dev: The struct device pointer + * @regs: Pointer to controller regs + * @core_params: Parameters that define how the core should be configured + * @hwcfg1: Hardware Configuration - stored here for convenience + * @hwcfg2: Hardware Configuration - stored here for convenience + * @hwcfg3: Hardware Configuration - stored here for convenience + * @hwcfg4: Hardware Configuration - stored here for convenience + * @hptxfsiz: Hardware Configuration - stored here for convenience + * @snpsid: Value from SNPSID register + * @total_fifo_size: Total internal RAM for FIFOs (bytes) + * @rx_fifo_size: Size of Rx FIFO (bytes) + * @nperio_tx_fifo_size: Size of Non-periodic Tx FIFO (Bytes) + * @op_state: The operational State, during transitions (a_host=> + * a_peripheral and b_device=>b_host) this may not match + * the core, but allows the software to determine + * transitions + * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth + * transfer are in process of being queued + * @srp_success: Stores status of SRP request in the case of a FS PHY + * with an I2C interface + * @wq_otg: Workqueue object used for handling of some interrupts + * @wf_otg: Work object for handling Connector ID Status Change + * interrupt + * @wkp_timer: Timer object for handling Wakeup Detected interrupt + * @lx_state: Lx state of connected device + * @flags: Flags for handling root port state changes + * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. + * @non_periodic_sched_active: Active QHs in the non-periodic schedule. + * Transfers associated with these QHs are currently + * assigned to a host channel. + * @non_periodic_qh_ptr: Pointer to next QH to process in the active + * non-periodic schedule + * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a + * list of QHs for periodic transfers that are _not_ + * scheduled for the next frame. Each QH in the list has an + * interval counter that determines when it needs to be + * scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth + * used (i.e. must assume that all periodic transfers may + * need to execute in the same frame). However, it greatly + * simplifies scheduling and should be sufficient for the + * vast majority of OTG hosts, which need to connect to a + * small number of peripherals at one time. Items move from + * this list to periodic_sched_ready when the QH interval + * counter is 0 at SOF. + * @periodic_sched_ready: List of periodic QHs that are ready for execution in + * the next frame, but have not yet been assigned to host + * channels. Items move from this list to + * periodic_sched_assigned as host channels become + * available during the current frame. + * @periodic_sched_assigned: List of periodic QHs to be executed in the next + * frame that are assigned to host channels. Items move + * from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg + * controller. + * @periodic_sched_queued: List of periodic QHs that have been queued for + * execution. Items move from this list to either + * periodic_sched_inactive or periodic_sched_ready when the + * channel associated with the transfer is released. If the + * interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for + * the next frame. Otherwise, the item moves to + * periodic_sched_inactive. + * @periodic_usecs: Total bandwidth claimed so far for periodic transfers. + * This value is in microseconds per (micro)frame. The + * assumption is that all periodic transfers may occur in + * the same (micro)frame. + * @frame_number: Frame number read from the core at SOF. The value ranges + * from 0 to HFNUM_MAX_FRNUM. + * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for + * SOF enable/disable. + * @free_hc_list: Free host channels in the controller. This is a list of + * struct dwc2_host_chan items. + * @periodic_channels: Number of host channels assigned to periodic transfers. + * Currently assuming that there is a dedicated host + * channel for each periodic transaction and at least one + * host channel is available for non-periodic transactions. + * @non_periodic_channels: Number of host channels assigned to non-periodic + * transfers + * @hc_ptr_array: Array of pointers to the host channel descriptors. + * Allows accessing a host channel descriptor given the + * host channel number. This is useful in interrupt + * handlers. + * @status_buf: Buffer used for data received during the status phase of + * a control transfer. + * @status_buf_dma: DMA address for status_buf + * @start_work: Delayed work for handling host A-cable connection + * @reset_work: Delayed work for handling a port reset + * @lock: Spinlock that protects all the driver data structures + * @priv: Stores a pointer to the struct usb_hcd + * @otg_port: OTG port number + * @frame_list: Frame list + * @frame_list_dma: Frame list DMA address + */ +struct dwc2_hsotg { + struct device *dev; + void __iomem *regs; + struct dwc2_core_params *core_params; + u32 hwcfg1; + u32 hwcfg2; + u32 hwcfg3; + u32 hwcfg4; + u32 hptxfsiz; + u32 snpsid; + u16 total_fifo_size; + u16 rx_fifo_size; + u16 nperio_tx_fifo_size; + enum usb_otg_state op_state; + + unsigned int queuing_high_bandwidth:1; + unsigned int srp_success:1; + + struct workqueue_struct *wq_otg; + struct work_struct wf_otg; + struct timer_list wkp_timer; + enum dwc2_lx_state lx_state; + + union dwc2_hcd_internal_flags { + u32 d32; + struct { + unsigned port_connect_status_change:1; + unsigned port_connect_status:1; + unsigned port_reset_change:1; + unsigned port_enable_change:1; + unsigned port_suspend_change:1; + unsigned port_over_current_change:1; + unsigned port_l1_change:1; + unsigned reserved:26; + } b; + } flags; + + struct list_head non_periodic_sched_inactive; + struct list_head non_periodic_sched_active; + struct list_head *non_periodic_qh_ptr; + struct list_head periodic_sched_inactive; + struct list_head periodic_sched_ready; + struct list_head periodic_sched_assigned; + struct list_head periodic_sched_queued; + u16 periodic_usecs; + u16 frame_number; + u16 periodic_qh_count; + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS +#define FRAME_NUM_ARRAY_SIZE 1000 + u16 last_frame_num; + u16 *frame_num_array; + u16 *last_frame_num_array; + int frame_num_idx; + int dumped_frame_num_array; +#endif + + struct list_head free_hc_list; + int periodic_channels; + int non_periodic_channels; + struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS]; + u8 *status_buf; + dma_addr_t status_buf_dma; +#define DWC2_HCD_STATUS_BUF_SIZE 64 + + struct delayed_work start_work; + struct delayed_work reset_work; + spinlock_t lock; + void *priv; + u8 otg_port; + u32 *frame_list; + dma_addr_t frame_list_dma; + + /* DWC OTG HW Release versions */ +#define DWC2_CORE_REV_2_71a 0x4f54271a +#define DWC2_CORE_REV_2_90a 0x4f54290a +#define DWC2_CORE_REV_2_92a 0x4f54292a +#define DWC2_CORE_REV_2_94a 0x4f54294a +#define DWC2_CORE_REV_3_00a 0x4f54300a + +#ifdef DEBUG + u32 frrem_samples; + u64 frrem_accum; + + u32 hfnum_7_samples_a; + u64 hfnum_7_frrem_accum_a; + u32 hfnum_0_samples_a; + u64 hfnum_0_frrem_accum_a; + u32 hfnum_other_samples_a; + u64 hfnum_other_frrem_accum_a; + + u32 hfnum_7_samples_b; + u64 hfnum_7_frrem_accum_b; + u32 hfnum_0_samples_b; + u64 hfnum_0_frrem_accum_b; + u32 hfnum_other_samples_b; + u64 hfnum_other_frrem_accum_b; +#endif +}; + +/* Reasons for halting a host channel */ +enum dwc2_halt_status { + DWC2_HC_XFER_NO_HALT_STATUS, + DWC2_HC_XFER_COMPLETE, + DWC2_HC_XFER_URB_COMPLETE, + DWC2_HC_XFER_ACK, + DWC2_HC_XFER_NAK, + DWC2_HC_XFER_NYET, + DWC2_HC_XFER_STALL, + DWC2_HC_XFER_XACT_ERR, + DWC2_HC_XFER_FRAME_OVERRUN, + DWC2_HC_XFER_BABBLE_ERR, + DWC2_HC_XFER_DATA_TOGGLE_ERR, + DWC2_HC_XFER_AHB_ERR, + DWC2_HC_XFER_PERIODIC_INCOMPLETE, + DWC2_HC_XFER_URB_DEQUEUE, +}; + +/* + * The following functions support initialization of the core driver component + * and the DWC_otg controller + */ +extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); + +/* + * Host core Functions. + * The following functions support managing the DWC_otg controller in host + * mode. + */ +extern void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); +extern void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status); +extern void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg); +extern void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg); + +extern u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); +extern int dwc2_check_core_status(struct dwc2_hsotg *hsotg); + +/* + * Common core Functions. + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +extern void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes); +extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num); +extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg); + +extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq); +extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd); +extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd); + +/* This function should be called on every hardware interrupt. */ +extern irqreturn_t dwc2_handle_common_intr(int irq, void *dev); + +/* OTG Core Parameters */ + +/* + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ +extern int dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val); +#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 + +/* + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ +extern int dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * When DMA mode is enabled specifies whether to use + * address DMA or DMA Descritor mode for accessing the data + * FIFOs in device mode. The driver will automatically detect + * the value for this parameter if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ +extern int dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ +extern int dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val); +#define DWC2_SPEED_PARAM_HIGH 0 +#define DWC2_SPEED_PARAM_FULL 1 + +/* + * Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ +extern int dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg, + int val); + +/* + * Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ +extern int dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, + int val); +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + +/* + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ +extern int dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ +extern int dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val); + +/* + * Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 256) + */ +extern int dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 256) + */ +extern int dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ +extern int dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val); + +/* + * The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ +extern int dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val); + +/* + * The number of host channel registers to use. + * 1 to 16 (default 11) + * Note: The FPGA configuration supports a maximum of 11 host channels. + */ +extern int dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ +extern int dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_TYPE_PARAM_FS 0 +#define DWC2_PHY_TYPE_PARAM_UTMI 1 +#define DWC2_PHY_TYPE_PARAM_ULPI 2 + +/* + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ +extern int dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ +extern int dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ +extern int dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC2_PHY_ULPI_EXTERNAL_VBUS 1 + +/* + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ +extern int dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ +extern int dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, + int val); + +extern int dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ahb_single(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val); + +/* + * Dump core registers and SPRAM + */ +extern void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); + +/* + * Return OTG version - either 1.3 or 2.0 + */ +extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); + +#endif /* __DWC2_CORE_H__ */ |