diff options
Diffstat (limited to 'drivers/staging/media/atomisp/i2c/ov2680.h')
| -rw-r--r-- | drivers/staging/media/atomisp/i2c/ov2680.h | 141 |
1 files changed, 73 insertions, 68 deletions
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h index baf49eb0659e..d032af245674 100644 --- a/drivers/staging/media/atomisp/i2c/ov2680.h +++ b/drivers/staging/media/atomisp/i2c/ov2680.h @@ -30,10 +30,16 @@ #include <linux/v4l2-mediabus.h> #include <media/media-entity.h> -#include "../include/linux/atomisp_platform.h" - #define OV2680_NATIVE_WIDTH 1616 #define OV2680_NATIVE_HEIGHT 1216 +#define OV2680_NATIVE_START_LEFT 0 +#define OV2680_NATIVE_START_TOP 0 +#define OV2680_ACTIVE_WIDTH 1600 +#define OV2680_ACTIVE_HEIGHT 1200 +#define OV2680_ACTIVE_START_LEFT 8 +#define OV2680_ACTIVE_START_TOP 8 +#define OV2680_MIN_CROP_WIDTH 2 +#define OV2680_MIN_CROP_HEIGHT 2 /* 1704 * 1294 * 30fps = 66MHz pixel clock */ #define OV2680_PIXELS_PER_LINE 1704 @@ -66,6 +72,8 @@ #define OV2680_REG_EXPOSURE_PK_HIGH 0x3500 #define OV2680_REG_GAIN_PK 0x350a +#define OV2680_REG_SENSOR_CTRL_0A 0x370a + #define OV2680_HORIZONTAL_START_H 0x3800 /* Bit[11:8] */ #define OV2680_HORIZONTAL_START_L 0x3801 /* Bit[7:0] */ #define OV2680_VERTICAL_START_H 0x3802 /* Bit[11:8] */ @@ -108,15 +116,18 @@ /* * ov2680 device structure. */ -struct ov2680_device { +struct ov2680_dev { struct v4l2_subdev sd; struct media_pad pad; - struct mutex input_lock; + /* Protect against concurrent changes to controls */ + struct mutex lock; struct i2c_client *client; struct gpio_desc *powerdown; + struct fwnode_handle *ep_fwnode; bool is_streaming; struct ov2680_mode { + struct v4l2_rect crop; struct v4l2_mbus_framefmt fmt; bool binning; u16 h_start; @@ -152,92 +163,86 @@ struct ov2680_reg { u32 val; /* @set value for read/mod/write, @mask */ }; -#define to_ov2680_sensor(x) container_of(x, struct ov2680_device, sd) +#define to_ov2680_sensor(x) container_of(x, struct ov2680_dev, sd) static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) { - struct ov2680_device *sensor = - container_of(ctrl->handler, struct ov2680_device, ctrls.handler); + struct ov2680_dev *sensor = + container_of(ctrl->handler, struct ov2680_dev, ctrls.handler); return &sensor->sd; } static struct ov2680_reg const ov2680_global_setting[] = { - {0x0103, 0x01}, - {0x3002, 0x00}, + /* MIPI PHY, 0x10 -> 0x1c enable bp_c_hs_en_lat and bp_d_hs_en_lat */ {0x3016, 0x1c}, - {0x3018, 0x44}, - {0x3020, 0x00}, - {0x3080, 0x02}, + + /* PLL MULT bits 0-7, datasheet default 0x37 for 24MHz extclk, use 0x45 for 19.2 Mhz extclk */ {0x3082, 0x45}, - {0x3084, 0x09}, - {0x3085, 0x04}, + + /* R MANUAL set exposure (0x01) and gain (0x02) to manual (hw does not do auto) */ {0x3503, 0x03}, - {0x350b, 0x36}, - {0x3600, 0xb4}, - {0x3603, 0x39}, - {0x3604, 0x24}, - {0x3605, 0x00}, - {0x3620, 0x26}, - {0x3621, 0x37}, - {0x3622, 0x04}, - {0x3628, 0x00}, - {0x3705, 0x3c}, - {0x370c, 0x50}, - {0x370d, 0xc0}, - {0x3718, 0x88}, - {0x3720, 0x00}, - {0x3721, 0x00}, - {0x3722, 0x00}, - {0x3723, 0x00}, - {0x3738, 0x00}, - {0x3717, 0x58}, - {0x3781, 0x80}, - {0x3789, 0x60}, - {0x3800, 0x00}, - {0x3819, 0x04}, + + /* Analog control register tweaks */ + {0x3603, 0x39}, /* Reset value 0x99 */ + {0x3604, 0x24}, /* Reset value 0x74 */ + {0x3621, 0x37}, /* Reset value 0x44 */ + + /* Sensor control register tweaks */ + {0x3701, 0x64}, /* Reset value 0x61 */ + {0x3705, 0x3c}, /* Reset value 0x21 */ + {0x370c, 0x50}, /* Reset value 0x10 */ + {0x370d, 0xc0}, /* Reset value 0x00 */ + {0x3718, 0x88}, /* Reset value 0x80 */ + + /* PSRAM tweaks */ + {0x3781, 0x80}, /* Reset value 0x00 */ + {0x3784, 0x0c}, /* Reset value 0x00, based on OV2680_R1A_AM10.ovt */ + {0x3789, 0x60}, /* Reset value 0x50 */ + + /* BLC CTRL00 0x01 -> 0x81 set avg_weight to 8 */ {0x4000, 0x81}, - {0x4001, 0x40}, + + /* Set black level compensation range to 0 - 3 (default 0 - 11) */ {0x4008, 0x00}, {0x4009, 0x03}, + + /* VFIFO R2 0x00 -> 0x02 set Frame reset enable */ {0x4602, 0x02}, + + /* MIPI ctrl CLK PREPARE MIN change from 0x26 (38) -> 0x36 (54) */ {0x481f, 0x36}, + + /* MIPI ctrl CLK LPX P MIN change from 0x32 (50) -> 0x36 (54) */ {0x4825, 0x36}, - {0x4837, 0x18}, + + /* R ISP CTRL2 0x20 -> 0x30, set sof_sel bit */ {0x5002, 0x30}, - {0x5004, 0x04},//manual awb 1x - {0x5005, 0x00}, - {0x5006, 0x04}, - {0x5007, 0x00}, - {0x5008, 0x04}, - {0x5009, 0x00}, - {0x5080, 0x00}, - {0x5081, 0x41}, - {0x5708, 0x01}, /* add for full size flip off and mirror off 2014/09/11 */ - {0x3701, 0x64}, //add on 14/05/13 - {0x3784, 0x0c}, //based OV2680_R1A_AM10.ovt add on 14/06/13 - {0x5780, 0x3e}, //based OV2680_R1A_AM10.ovt,Adjust DPC setting (57xx) on 14/06/13 - {0x5781, 0x0f}, - {0x5782, 0x04}, - {0x5783, 0x02}, - {0x5784, 0x01}, - {0x5785, 0x01}, - {0x5786, 0x00}, - {0x5787, 0x04}, + + /* + * Window CONTROL 0x00 -> 0x01, enable manual window control, + * this is necessary for full size flip and mirror support. + */ + {0x5708, 0x01}, + + /* + * DPC CTRL0 0x14 -> 0x3e, set enable_tail, enable_3x3_cluster + * and enable_general_tail bits based OV2680_R1A_AM10.ovt. + */ + {0x5780, 0x3e}, + + /* DPC MORE CONNECTION CASE THRE 0x0c (12) -> 0x02 (2) */ {0x5788, 0x02}, - {0x5789, 0x00}, - {0x578a, 0x01}, - {0x578b, 0x02}, - {0x578c, 0x03}, - {0x578d, 0x03}, + + /* DPC GAIN LIST1 0x0f (15) -> 0x08 (8) */ {0x578e, 0x08}, + + /* DPC GAIN LIST2 0x3f (63) -> 0x0c (12) */ {0x578f, 0x0c}, - {0x5790, 0x08}, - {0x5791, 0x04}, + + /* DPC THRE RATIO 0x04 (4) -> 0x00 (0) */ {0x5792, 0x00}, - {0x5793, 0x00}, - {0x5794, 0x03}, //based OV2680_R1A_AM10.ovt,Adjust DPC setting (57xx) on 14/06/13 - {0x0100, 0x00}, //stream off + {} }; |