diff options
Diffstat (limited to 'drivers/staging/media/atomisp/i2c')
| -rw-r--r-- | drivers/staging/media/atomisp/i2c/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/staging/media/atomisp/i2c/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 849 | ||||
| -rw-r--r-- | drivers/staging/media/atomisp/i2c/ov2680.h | 249 |
4 files changed, 0 insertions, 1111 deletions
diff --git a/drivers/staging/media/atomisp/i2c/Kconfig b/drivers/staging/media/atomisp/i2c/Kconfig index e726101b24e4..2d4165cda2f1 100644 --- a/drivers/staging/media/atomisp/i2c/Kconfig +++ b/drivers/staging/media/atomisp/i2c/Kconfig @@ -57,18 +57,6 @@ config VIDEO_ATOMISP_GC0310 This is a Video4Linux2 sensor-level driver for the Galaxycore GC0310 0.3MP sensor. -config VIDEO_ATOMISP_OV2680 - tristate "Omnivision OV2680 sensor support" - depends on ACPI - depends on I2C && VIDEO_DEV - help - This is a Video4Linux2 sensor-level driver for the Omnivision - OV2680 raw camera. - - ov2680 is a 2M raw sensor. - - It currently only works with the atomisp driver. - config VIDEO_ATOMISP_OV5693 tristate "Omnivision ov5693 sensor support" depends on ACPI diff --git a/drivers/staging/media/atomisp/i2c/Makefile b/drivers/staging/media/atomisp/i2c/Makefile index 8d022986e199..fc55af5f3422 100644 --- a/drivers/staging/media/atomisp/i2c/Makefile +++ b/drivers/staging/media/atomisp/i2c/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_VIDEO_ATOMISP_OV5693) += ov5693/ obj-$(CONFIG_VIDEO_ATOMISP_MT9M114) += atomisp-mt9m114.o obj-$(CONFIG_VIDEO_ATOMISP_GC2235) += atomisp-gc2235.o obj-$(CONFIG_VIDEO_ATOMISP_OV2722) += atomisp-ov2722.o -obj-$(CONFIG_VIDEO_ATOMISP_OV2680) += atomisp-ov2680.o obj-$(CONFIG_VIDEO_ATOMISP_GC0310) += atomisp-gc0310.o obj-$(CONFIG_VIDEO_ATOMISP_MSRLIST_HELPER) += atomisp-libmsrlisthelper.o diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c deleted file mode 100644 index 4cc2839937af..000000000000 --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +++ /dev/null @@ -1,849 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Support for OmniVision OV2680 1080p HD camera sensor. - * - * Copyright (c) 2013 Intel Corporation. All Rights Reserved. - * Copyright (c) 2023 Hans de Goede <hdegoede@redhat.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/acpi.h> -#include <linux/device.h> -#include <linux/gpio/consumer.h> -#include <linux/gpio/machine.h> -#include <linux/i2c.h> -#include <linux/module.h> -#include <linux/pm_runtime.h> -#include <linux/types.h> - -#include <media/ov_16bit_addr_reg_helpers.h> -#include <media/v4l2-device.h> - -#include "ov2680.h" - -static const struct v4l2_rect ov2680_default_crop = { - .left = OV2680_ACTIVE_START_LEFT, - .top = OV2680_ACTIVE_START_TOP, - .width = OV2680_ACTIVE_WIDTH, - .height = OV2680_ACTIVE_HEIGHT, -}; - -static int ov2680_write_reg_array(struct i2c_client *client, - const struct ov2680_reg *reglist) -{ - const struct ov2680_reg *next = reglist; - int ret; - - for (; next->reg != 0; next++) { - ret = ov_write_reg8(client, next->reg, next->val); - if (ret) - return ret; - } - - return 0; -} - -static void ov2680_set_bayer_order(struct ov2680_dev *sensor, struct v4l2_mbus_framefmt *fmt) -{ - static const int ov2680_hv_flip_bayer_order[] = { - MEDIA_BUS_FMT_SBGGR10_1X10, - MEDIA_BUS_FMT_SGRBG10_1X10, - MEDIA_BUS_FMT_SGBRG10_1X10, - MEDIA_BUS_FMT_SRGGB10_1X10, - }; - int hv_flip = 0; - - if (sensor->ctrls.vflip->val) - hv_flip += 1; - - if (sensor->ctrls.hflip->val) - hv_flip += 2; - - fmt->code = ov2680_hv_flip_bayer_order[hv_flip]; -} - -static int ov2680_set_vflip(struct ov2680_dev *sensor, s32 val) -{ - int ret; - - if (sensor->is_streaming) - return -EBUSY; - - ret = ov_update_reg(sensor->client, OV2680_REG_FORMAT1, BIT(2), val ? BIT(2) : 0); - if (ret < 0) - return ret; - - ov2680_set_bayer_order(sensor, &sensor->mode.fmt); - return 0; -} - -static int ov2680_set_hflip(struct ov2680_dev *sensor, s32 val) -{ - int ret; - - if (sensor->is_streaming) - return -EBUSY; - - ret = ov_update_reg(sensor->client, OV2680_REG_FORMAT2, BIT(2), val ? BIT(2) : 0); - if (ret < 0) - return ret; - - ov2680_set_bayer_order(sensor, &sensor->mode.fmt); - return 0; -} - -static int ov2680_exposure_set(struct ov2680_dev *sensor, u32 exp) -{ - return ov_write_reg24(sensor->client, OV2680_REG_EXPOSURE_PK_HIGH, exp << 4); -} - -static int ov2680_gain_set(struct ov2680_dev *sensor, u32 gain) -{ - return ov_write_reg16(sensor->client, OV2680_REG_GAIN_PK, gain); -} - -static int ov2680_test_pattern_set(struct ov2680_dev *sensor, int value) -{ - int ret; - - if (!value) - return ov_update_reg(sensor->client, OV2680_REG_ISP_CTRL00, BIT(7), 0); - - ret = ov_update_reg(sensor->client, OV2680_REG_ISP_CTRL00, 0x03, value - 1); - if (ret < 0) - return ret; - - ret = ov_update_reg(sensor->client, OV2680_REG_ISP_CTRL00, BIT(7), BIT(7)); - if (ret < 0) - return ret; - - return 0; -} - -static int ov2680_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct v4l2_subdev *sd = ctrl_to_sd(ctrl); - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - int ret; - - /* Only apply changes to the controls if the device is powered up */ - if (!pm_runtime_get_if_in_use(sensor->sd.dev)) { - ov2680_set_bayer_order(sensor, &sensor->mode.fmt); - return 0; - } - - switch (ctrl->id) { - case V4L2_CID_VFLIP: - ret = ov2680_set_vflip(sensor, ctrl->val); - break; - case V4L2_CID_HFLIP: - ret = ov2680_set_hflip(sensor, ctrl->val); - break; - case V4L2_CID_EXPOSURE: - ret = ov2680_exposure_set(sensor, ctrl->val); - break; - case V4L2_CID_GAIN: - ret = ov2680_gain_set(sensor, ctrl->val); - break; - case V4L2_CID_TEST_PATTERN: - ret = ov2680_test_pattern_set(sensor, ctrl->val); - break; - default: - ret = -EINVAL; - } - - pm_runtime_put(sensor->sd.dev); - return ret; -} - -static const struct v4l2_ctrl_ops ov2680_ctrl_ops = { - .s_ctrl = ov2680_s_ctrl, -}; - -static int ov2680_init_registers(struct v4l2_subdev *sd) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - - ret = ov_write_reg8(client, OV2680_SW_RESET, 0x01); - - /* Wait for sensor reset */ - usleep_range(1000, 2000); - - ret |= ov2680_write_reg_array(client, ov2680_global_setting); - - return ret; -} - -static struct v4l2_mbus_framefmt * -__ov2680_get_pad_format(struct ov2680_dev *sensor, struct v4l2_subdev_state *state, - unsigned int pad, enum v4l2_subdev_format_whence which) -{ - if (which == V4L2_SUBDEV_FORMAT_TRY) - return v4l2_subdev_get_try_format(&sensor->sd, state, pad); - - return &sensor->mode.fmt; -} - -static struct v4l2_rect * -__ov2680_get_pad_crop(struct ov2680_dev *sensor, struct v4l2_subdev_state *state, - unsigned int pad, enum v4l2_subdev_format_whence which) -{ - if (which == V4L2_SUBDEV_FORMAT_TRY) - return v4l2_subdev_get_try_crop(&sensor->sd, state, pad); - - return &sensor->mode.crop; -} - -static void ov2680_fill_format(struct ov2680_dev *sensor, - struct v4l2_mbus_framefmt *fmt, - unsigned int width, unsigned int height) -{ - memset(fmt, 0, sizeof(*fmt)); - fmt->width = width; - fmt->height = height; - fmt->field = V4L2_FIELD_NONE; - ov2680_set_bayer_order(sensor, fmt); -} - -static void ov2680_calc_mode(struct ov2680_dev *sensor) -{ - int width = sensor->mode.fmt.width; - int height = sensor->mode.fmt.height; - int orig_width = width; - int orig_height = height; - - if (width <= (sensor->mode.crop.width / 2) && - height <= (sensor->mode.crop.height / 2)) { - sensor->mode.binning = true; - width *= 2; - height *= 2; - } else { - sensor->mode.binning = false; - } - - sensor->mode.h_start = - (sensor->mode.crop.left + (sensor->mode.crop.width - width) / 2) & ~1; - sensor->mode.v_start = - (sensor->mode.crop.top + (sensor->mode.crop.height - height) / 2) & ~1; - sensor->mode.h_end = min(sensor->mode.h_start + width + OV2680_END_MARGIN - 1, - OV2680_NATIVE_WIDTH - 1); - sensor->mode.v_end = min(sensor->mode.v_start + height + OV2680_END_MARGIN - 1, - OV2680_NATIVE_HEIGHT - 1); - sensor->mode.h_output_size = orig_width; - sensor->mode.v_output_size = orig_height; - sensor->mode.hts = OV2680_PIXELS_PER_LINE; - sensor->mode.vts = OV2680_LINES_PER_FRAME; -} - -static int ov2680_set_mode(struct ov2680_dev *sensor) -{ - struct i2c_client *client = sensor->client; - u8 sensor_ctrl_0a, inc, fmt1, fmt2; - int ret; - - if (sensor->mode.binning) { - sensor_ctrl_0a = 0x23; - inc = 0x31; - fmt1 = 0xc2; - fmt2 = 0x01; - } else { - sensor_ctrl_0a = 0x21; - inc = 0x11; - fmt1 = 0xc0; - fmt2 = 0x00; - } - - ret = ov_write_reg8(client, OV2680_REG_SENSOR_CTRL_0A, sensor_ctrl_0a); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_HORIZONTAL_START_H, sensor->mode.h_start); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_VERTICAL_START_H, sensor->mode.v_start); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_HORIZONTAL_END_H, sensor->mode.h_end); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_VERTICAL_END_H, sensor->mode.v_end); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_HORIZONTAL_OUTPUT_SIZE_H, - sensor->mode.h_output_size); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_VERTICAL_OUTPUT_SIZE_H, - sensor->mode.v_output_size); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_HTS, sensor->mode.hts); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_VTS, sensor->mode.vts); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_ISP_X_WIN, 0); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_ISP_Y_WIN, 0); - if (ret) - return ret; - - ret = ov_write_reg8(client, OV2680_X_INC, inc); - if (ret) - return ret; - - ret = ov_write_reg8(client, OV2680_Y_INC, inc); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_X_WIN, sensor->mode.h_output_size); - if (ret) - return ret; - - ret = ov_write_reg16(client, OV2680_Y_WIN, sensor->mode.v_output_size); - if (ret) - return ret; - - ret = ov_write_reg8(client, OV2680_REG_FORMAT1, fmt1); - if (ret) - return ret; - - ret = ov_write_reg8(client, OV2680_REG_FORMAT2, fmt2); - if (ret) - return ret; - - return 0; -} - -static int ov2680_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_format *format) -{ - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - struct v4l2_mbus_framefmt *fmt; - const struct v4l2_rect *crop; - unsigned int width, height; - - crop = __ov2680_get_pad_crop(sensor, sd_state, format->pad, format->which); - - /* Limit set_fmt max size to crop width / height */ - width = clamp_t(unsigned int, ALIGN(format->format.width, 2), - OV2680_MIN_CROP_WIDTH, crop->width); - height = clamp_t(unsigned int, ALIGN(format->format.height, 2), - OV2680_MIN_CROP_HEIGHT, crop->height); - - fmt = __ov2680_get_pad_format(sensor, sd_state, format->pad, format->which); - ov2680_fill_format(sensor, fmt, width, height); - - format->format = *fmt; - - if (format->which == V4L2_SUBDEV_FORMAT_TRY) - return 0; - - mutex_lock(&sensor->lock); - ov2680_calc_mode(sensor); - mutex_unlock(&sensor->lock); - return 0; -} - -static int ov2680_get_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_format *format) -{ - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - struct v4l2_mbus_framefmt *fmt; - - fmt = __ov2680_get_pad_format(sensor, sd_state, format->pad, format->which); - format->format = *fmt; - return 0; -} - -static int ov2680_get_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_state *state, - struct v4l2_subdev_selection *sel) -{ - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - - switch (sel->target) { - case V4L2_SEL_TGT_CROP: - mutex_lock(&sensor->lock); - sel->r = *__ov2680_get_pad_crop(sensor, state, sel->pad, sel->which); - mutex_unlock(&sensor->lock); - break; - case V4L2_SEL_TGT_NATIVE_SIZE: - case V4L2_SEL_TGT_CROP_BOUNDS: - sel->r.top = 0; - sel->r.left = 0; - sel->r.width = OV2680_NATIVE_WIDTH; - sel->r.height = OV2680_NATIVE_HEIGHT; - break; - case V4L2_SEL_TGT_CROP_DEFAULT: - sel->r.top = OV2680_ACTIVE_START_TOP; - sel->r.left = OV2680_ACTIVE_START_LEFT; - sel->r.width = OV2680_ACTIVE_WIDTH; - sel->r.height = OV2680_ACTIVE_HEIGHT; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int ov2680_set_selection(struct v4l2_subdev *sd, - struct v4l2_subdev_state *state, - struct v4l2_subdev_selection *sel) -{ - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - struct v4l2_mbus_framefmt *format; - struct v4l2_rect *__crop; - struct v4l2_rect rect; - - if (sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - /* - * Clamp the boundaries of the crop rectangle to the size of the sensor - * pixel array. Align to multiples of 2 to ensure Bayer pattern isn't - * disrupted. - */ - rect.left = clamp(ALIGN(sel->r.left, 2), OV2680_NATIVE_START_LEFT, - OV2680_NATIVE_WIDTH); - rect.top = clamp(ALIGN(sel->r.top, 2), OV2680_NATIVE_START_TOP, - OV2680_NATIVE_HEIGHT); - rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2), - OV2680_MIN_CROP_WIDTH, OV2680_NATIVE_WIDTH); - rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2), - OV2680_MIN_CROP_HEIGHT, OV2680_NATIVE_HEIGHT); - - /* Make sure the crop rectangle isn't outside the bounds of the array */ - rect.width = min_t(unsigned int, rect.width, - OV2680_NATIVE_WIDTH - rect.left); - rect.height = min_t(unsigned int, rect.height, - OV2680_NATIVE_HEIGHT - rect.top); - - __crop = __ov2680_get_pad_crop(sensor, state, sel->pad, sel->which); - - if (rect.width != __crop->width || rect.height != __crop->height) { - /* - * Reset the output image size if the crop rectangle size has - * been modified. - */ - format = __ov2680_get_pad_format(sensor, state, sel->pad, sel->which); - format->width = rect.width; - format->height = rect.height; - } - - *__crop = rect; - sel->r = rect; - - return 0; -} - -static int ov2680_init_cfg(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state) -{ - struct v4l2_subdev_format fmt = { - .which = sd_state ? V4L2_SUBDEV_FORMAT_TRY - : V4L2_SUBDEV_FORMAT_ACTIVE, - .format = { - .width = 800, - .height = 600, - }, - }; - - sd_state->pads[0].try_crop = ov2680_default_crop; - - return ov2680_set_fmt(sd, sd_state, &fmt); -} - -static int ov2680_detect(struct i2c_client *client) -{ - struct i2c_adapter *adapter = client->adapter; - u32 high = 0, low = 0; - int ret; - u16 id; - u8 revision; - - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) - return -ENODEV; - - ret = ov_read_reg8(client, OV2680_SC_CMMN_CHIP_ID_H, &high); - if (ret) { - dev_err(&client->dev, "sensor_id_high read failed (%d)\n", ret); - return -ENODEV; - } - ret = ov_read_reg8(client, OV2680_SC_CMMN_CHIP_ID_L, &low); - id = ((((u16)high) << 8) | (u16)low); - - if (id != OV2680_ID) { - dev_err(&client->dev, "sensor ID error 0x%x\n", id); - return -ENODEV; - } - - ret = ov_read_reg8(client, OV2680_SC_CMMN_SUB_ID, &high); - revision = (u8)high & 0x0f; - - dev_info(&client->dev, "sensor_revision id = 0x%x, rev= %d\n", - id, revision); - - return 0; -} - -static int ov2680_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret = 0; - - mutex_lock(&sensor->lock); - - if (sensor->is_streaming == enable) { - dev_warn(&client->dev, "stream already %s\n", enable ? "started" : "stopped"); - goto error_unlock; - } - - if (enable) { - ret = pm_runtime_get_sync(sensor->sd.dev); - if (ret < 0) - goto error_power_down; - - ret = ov2680_set_mode(sensor); - if (ret) - goto error_power_down; - - /* Restore value of all ctrls */ - ret = __v4l2_ctrl_handler_setup(&sensor->ctrls.handler); - if (ret) - goto error_power_down; - - ret = ov_write_reg8(client, OV2680_SW_STREAM, OV2680_START_STREAMING); - if (ret) - goto error_power_down; - } else { - ov_write_reg8(client, OV2680_SW_STREAM, OV2680_STOP_STREAMING); - pm_runtime_put(sensor->sd.dev); - } - - sensor->is_streaming = enable; - v4l2_ctrl_activate(sensor->ctrls.vflip, !enable); - v4l2_ctrl_activate(sensor->ctrls.hflip, !enable); - - mutex_unlock(&sensor->lock); - return 0; - -error_power_down: - pm_runtime_put(sensor->sd.dev); - sensor->is_streaming = false; -error_unlock: - mutex_unlock(&sensor->lock); - return ret; -} - -static int ov2680_s_config(struct v4l2_subdev *sd) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - int ret; - - ret = pm_runtime_get_sync(&client->dev); - if (ret < 0) { - dev_err(&client->dev, "ov2680 power-up err.\n"); - goto fail_power_on; - } - - /* config & detect sensor */ - ret = ov2680_detect(client); - if (ret) - dev_err(&client->dev, "ov2680_detect err s_config.\n"); - -fail_power_on: - pm_runtime_put(&client->dev); - return ret; -} - -static int ov2680_g_frame_interval(struct v4l2_subdev *sd, - struct v4l2_subdev_frame_interval *interval) -{ - interval->interval.numerator = 1; - interval->interval.denominator = OV2680_FPS; - return 0; -} - -static int ov2680_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_mbus_code_enum *code) -{ - /* We support only a single format */ - if (code->index) - return -EINVAL; - - code->code = MEDIA_BUS_FMT_SBGGR10_1X10; - return 0; -} - -static int ov2680_enum_frame_size(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_frame_size_enum *fse) -{ - static const struct v4l2_frmsize_discrete ov2680_frame_sizes[] = { - { 1616, 1216 }, - { 1616, 1096 }, - { 1616, 916 }, - { 1456, 1096 }, - { 1296, 976 }, - { 1296, 736 }, - { 784, 592 }, - { 656, 496 }, - }; - int index = fse->index; - - if (index >= ARRAY_SIZE(ov2680_frame_sizes)) - return -EINVAL; - - fse->min_width = ov2680_frame_sizes[index].width; - fse->min_height = ov2680_frame_sizes[index].height; - fse->max_width = ov2680_frame_sizes[index].width; - fse->max_height = ov2680_frame_sizes[index].height; - - return 0; -} - -static int ov2680_enum_frame_interval(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_frame_interval_enum *fie) -{ - /* Only 1 framerate */ - if (fie->index) - return -EINVAL; - - fie->interval.numerator = 1; - fie->interval.denominator = OV2680_FPS; - return 0; -} - -static int ov2680_g_skip_frames(struct v4l2_subdev *sd, u32 *frames) -{ - *frames = OV2680_SKIP_FRAMES; - return 0; -} - -static const struct v4l2_subdev_video_ops ov2680_video_ops = { - .s_stream = ov2680_s_stream, - .g_frame_interval = ov2680_g_frame_interval, -}; - -static const struct v4l2_subdev_sensor_ops ov2680_sensor_ops = { - .g_skip_frames = ov2680_g_skip_frames, -}; - -static const struct v4l2_subdev_pad_ops ov2680_pad_ops = { - .init_cfg = ov2680_init_cfg, - .enum_mbus_code = ov2680_enum_mbus_code, - .enum_frame_size = ov2680_enum_frame_size, - .enum_frame_interval = ov2680_enum_frame_interval, - .get_fmt = ov2680_get_fmt, - .set_fmt = ov2680_set_fmt, - .get_selection = ov2680_get_selection, - .set_selection = ov2680_set_selection, -}; - -static const struct v4l2_subdev_ops ov2680_ops = { - .video = &ov2680_video_ops, - .pad = &ov2680_pad_ops, - .sensor = &ov2680_sensor_ops, -}; - -static int ov2680_init_controls(struct ov2680_dev *sensor) -{ - static const char * const test_pattern_menu[] = { - "Disabled", - "Color Bars", - "Random Data", - "Square", - "Black Image", - }; - const struct v4l2_ctrl_ops *ops = &ov2680_ctrl_ops; - struct ov2680_ctrls *ctrls = &sensor->ctrls; - struct v4l2_ctrl_handler *hdl = &ctrls->handler; - int exp_max = OV2680_LINES_PER_FRAME - OV2680_INTEGRATION_TIME_MARGIN; - - v4l2_ctrl_handler_init(hdl, 4); - - hdl->lock = &sensor->lock; - - ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0); - ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0); - ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, - 0, exp_max, 1, exp_max); - ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 1023, 1, 250); - ctrls->test_pattern = - v4l2_ctrl_new_std_menu_items(hdl, - &ov2680_ctrl_ops, V4L2_CID_TEST_PATTERN, - ARRAY_SIZE(test_pattern_menu) - 1, - 0, 0, test_pattern_menu); - - ctrls->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT; - ctrls->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT; - - if (hdl->error) - return hdl->error; - - sensor->sd.ctrl_handler = hdl; - return 0; -} - -static void ov2680_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - - dev_dbg(&client->dev, "ov2680_remove...\n"); - - v4l2_async_unregister_subdev(&sensor->sd); - media_entity_cleanup(&sensor->sd.entity); - v4l2_ctrl_handler_free(&sensor->ctrls.handler); - mutex_destroy(&sensor->lock); - fwnode_handle_put(sensor->ep_fwnode); - pm_runtime_disable(&client->dev); -} - -static int ov2680_probe(struct i2c_client *client) -{ - struct device *dev = &client->dev; - struct ov2680_dev *sensor; - int ret; - - sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); - if (!sensor) - return -ENOMEM; - - mutex_init(&sensor->lock); - - sensor->client = client; - v4l2_i2c_subdev_init(&sensor->sd, client, &ov2680_ops); - - /* - * Sometimes the fwnode graph is initialized by the bridge driver. - * Bridge drivers doing this may also add GPIO mappings, wait for this. - */ - sensor->ep_fwnode = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); - if (!sensor->ep_fwnode) - return dev_err_probe(dev, -EPROBE_DEFER, "waiting for fwnode graph endpoint\n"); - - sensor->powerdown = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH); - if (IS_ERR(sensor->powerdown)) { - fwnode_handle_put(sensor->ep_fwnode); - return dev_err_probe(dev, PTR_ERR(sensor->powerdown), "getting powerdown GPIO\n"); - } - - pm_runtime_set_suspended(dev); - pm_runtime_enable(dev); - pm_runtime_set_autosuspend_delay(dev, 1000); - pm_runtime_use_autosuspend(dev); - - ret = ov2680_s_config(&sensor->sd); - if (ret) { - ov2680_remove(client); - return ret; - } - - sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; - sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; - sensor->sd.fwnode = sensor->ep_fwnode; - - ret = ov2680_init_controls(sensor); - if (ret) { - ov2680_remove(client); - return ret; - } - - ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); - if (ret) { - ov2680_remove(client); - return ret; - } - - sensor->mode.crop = ov2680_default_crop; - ov2680_fill_format(sensor, &sensor->mode.fmt, OV2680_NATIVE_WIDTH, OV2680_NATIVE_HEIGHT); - ov2680_calc_mode(sensor); - - ret = v4l2_async_register_subdev_sensor(&sensor->sd); - if (ret) { - ov2680_remove(client); - return ret; - } - - return 0; -} - -static int ov2680_suspend(struct device *dev) -{ - struct v4l2_subdev *sd = dev_get_drvdata(dev); - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - - gpiod_set_value_cansleep(sensor->powerdown, 1); - return 0; -} - -static int ov2680_resume(struct device *dev) -{ - struct v4l2_subdev *sd = dev_get_drvdata(dev); - struct ov2680_dev *sensor = to_ov2680_sensor(sd); - - /* according to DS, at least 5ms is needed after DOVDD (enabled by ACPI) */ - usleep_range(5000, 6000); - - gpiod_set_value_cansleep(sensor->powerdown, 0); - - /* according to DS, 20ms is needed between PWDN and i2c access */ - msleep(20); - - ov2680_init_registers(sd); - return 0; -} - -static DEFINE_RUNTIME_DEV_PM_OPS(ov2680_pm_ops, ov2680_suspend, ov2680_resume, NULL); - -static const struct acpi_device_id ov2680_acpi_match[] = { - {"XXOV2680"}, - {"OVTI2680"}, - {}, -}; -MODULE_DEVICE_TABLE(acpi, ov2680_acpi_match); - -static struct i2c_driver ov2680_driver = { - .driver = { - .name = "ov2680", - .pm = pm_sleep_ptr(&ov2680_pm_ops), - .acpi_match_table = ov2680_acpi_match, - }, - .probe = ov2680_probe, - .remove = ov2680_remove, -}; -module_i2c_driver(ov2680_driver); - -MODULE_AUTHOR("Jacky Wang <Jacky_wang@ovt.com>"); -MODULE_DESCRIPTION("A low-level driver for OmniVision 2680 sensors"); -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h deleted file mode 100644 index d032af245674..000000000000 --- a/drivers/staging/media/atomisp/i2c/ov2680.h +++ /dev/null @@ -1,249 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Support for OmniVision OV2680 5M camera sensor. - * - * Copyright (c) 2013 Intel Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - */ - -#ifndef __OV2680_H__ -#define __OV2680_H__ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/i2c.h> -#include <linux/delay.h> -#include <linux/videodev2.h> -#include <linux/spinlock.h> -#include <media/v4l2-subdev.h> -#include <media/v4l2-device.h> -#include <media/v4l2-ctrls.h> -#include <linux/v4l2-mediabus.h> -#include <media/media-entity.h> - -#define OV2680_NATIVE_WIDTH 1616 -#define OV2680_NATIVE_HEIGHT 1216 -#define OV2680_NATIVE_START_LEFT 0 -#define OV2680_NATIVE_START_TOP 0 -#define OV2680_ACTIVE_WIDTH 1600 -#define OV2680_ACTIVE_HEIGHT 1200 -#define OV2680_ACTIVE_START_LEFT 8 -#define OV2680_ACTIVE_START_TOP 8 -#define OV2680_MIN_CROP_WIDTH 2 -#define OV2680_MIN_CROP_HEIGHT 2 - -/* 1704 * 1294 * 30fps = 66MHz pixel clock */ -#define OV2680_PIXELS_PER_LINE 1704 -#define OV2680_LINES_PER_FRAME 1294 -#define OV2680_FPS 30 -#define OV2680_SKIP_FRAMES 3 - -/* If possible send 16 extra rows / lines to the ISP as padding */ -#define OV2680_END_MARGIN 16 - -#define OV2680_FOCAL_LENGTH_NUM 334 /*3.34mm*/ - -#define OV2680_INTEGRATION_TIME_MARGIN 8 -#define OV2680_ID 0x2680 - -/* - * OV2680 System control registers - */ -#define OV2680_SW_SLEEP 0x0100 -#define OV2680_SW_RESET 0x0103 -#define OV2680_SW_STREAM 0x0100 - -#define OV2680_SC_CMMN_CHIP_ID_H 0x300A -#define OV2680_SC_CMMN_CHIP_ID_L 0x300B -#define OV2680_SC_CMMN_SCCB_ID 0x302B /* 0x300C*/ -#define OV2680_SC_CMMN_SUB_ID 0x302A /* process, version*/ - -#define OV2680_GROUP_ACCESS 0x3208 /*Bit[7:4] Group control, Bit[3:0] Group ID*/ - -#define OV2680_REG_EXPOSURE_PK_HIGH 0x3500 -#define OV2680_REG_GAIN_PK 0x350a - -#define OV2680_REG_SENSOR_CTRL_0A 0x370a - -#define OV2680_HORIZONTAL_START_H 0x3800 /* Bit[11:8] */ -#define OV2680_HORIZONTAL_START_L 0x3801 /* Bit[7:0] */ -#define OV2680_VERTICAL_START_H 0x3802 /* Bit[11:8] */ -#define OV2680_VERTICAL_START_L 0x3803 /* Bit[7:0] */ -#define OV2680_HORIZONTAL_END_H 0x3804 /* Bit[11:8] */ -#define OV2680_HORIZONTAL_END_L 0x3805 /* Bit[7:0] */ -#define OV2680_VERTICAL_END_H 0x3806 /* Bit[11:8] */ -#define OV2680_VERTICAL_END_L 0x3807 /* Bit[7:0] */ -#define OV2680_HORIZONTAL_OUTPUT_SIZE_H 0x3808 /* Bit[11:8] */ -#define OV2680_HORIZONTAL_OUTPUT_SIZE_L 0x3809 /* Bit[7:0] */ -#define OV2680_VERTICAL_OUTPUT_SIZE_H 0x380a /* Bit[11:8] */ -#define OV2680_VERTICAL_OUTPUT_SIZE_L 0x380b /* Bit[7:0] */ -#define OV2680_HTS 0x380c -#define OV2680_VTS 0x380e -#define OV2680_ISP_X_WIN 0x3810 -#define OV2680_ISP_Y_WIN 0x3812 -#define OV2680_X_INC 0x3814 -#define OV2680_Y_INC 0x3815 - -#define OV2680_FRAME_OFF_NUM 0x4202 - -/*Flip/Mirror*/ -#define OV2680_REG_FORMAT1 0x3820 -#define OV2680_REG_FORMAT2 0x3821 - -#define OV2680_MWB_RED_GAIN_H 0x5004/*0x3400*/ -#define OV2680_MWB_GREEN_GAIN_H 0x5006/*0x3402*/ -#define OV2680_MWB_BLUE_GAIN_H 0x5008/*0x3404*/ -#define OV2680_MWB_GAIN_MAX 0x0fff - -#define OV2680_REG_ISP_CTRL00 0x5080 - -#define OV2680_X_WIN 0x5704 -#define OV2680_Y_WIN 0x5706 -#define OV2680_WIN_CONTROL 0x5708 - -#define OV2680_START_STREAMING 0x01 -#define OV2680_STOP_STREAMING 0x00 - -/* - * ov2680 device structure. - */ -struct ov2680_dev { - struct v4l2_subdev sd; - struct media_pad pad; - /* Protect against concurrent changes to controls */ - struct mutex lock; - struct i2c_client *client; - struct gpio_desc *powerdown; - struct fwnode_handle *ep_fwnode; - bool is_streaming; - - struct ov2680_mode { - struct v4l2_rect crop; - struct v4l2_mbus_framefmt fmt; - bool binning; - u16 h_start; - u16 v_start; - u16 h_end; - u16 v_end; - u16 h_output_size; - u16 v_output_size; - u16 hts; - u16 vts; - } mode; - - struct ov2680_ctrls { - struct v4l2_ctrl_handler handler; - struct v4l2_ctrl *hflip; - struct v4l2_ctrl *vflip; - struct v4l2_ctrl *exposure; - struct v4l2_ctrl *gain; - struct v4l2_ctrl *test_pattern; - } ctrls; -}; - -/** - * struct ov2680_reg - MI sensor register format - * @type: type of the register - * @reg: 16-bit offset to register - * @val: 8/16/32-bit register value - * - * Define a structure for sensor register initialization values - */ -struct ov2680_reg { - u16 reg; - u32 val; /* @set value for read/mod/write, @mask */ -}; - -#define to_ov2680_sensor(x) container_of(x, struct ov2680_dev, sd) - -static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) -{ - struct ov2680_dev *sensor = - container_of(ctrl->handler, struct ov2680_dev, ctrls.handler); - - return &sensor->sd; -} - -static struct ov2680_reg const ov2680_global_setting[] = { - /* MIPI PHY, 0x10 -> 0x1c enable bp_c_hs_en_lat and bp_d_hs_en_lat */ - {0x3016, 0x1c}, - - /* PLL MULT bits 0-7, datasheet default 0x37 for 24MHz extclk, use 0x45 for 19.2 Mhz extclk */ - {0x3082, 0x45}, - - /* R MANUAL set exposure (0x01) and gain (0x02) to manual (hw does not do auto) */ - {0x3503, 0x03}, - - /* Analog control register tweaks */ - {0x3603, 0x39}, /* Reset value 0x99 */ - {0x3604, 0x24}, /* Reset value 0x74 */ - {0x3621, 0x37}, /* Reset value 0x44 */ - - /* Sensor control register tweaks */ - {0x3701, 0x64}, /* Reset value 0x61 */ - {0x3705, 0x3c}, /* Reset value 0x21 */ - {0x370c, 0x50}, /* Reset value 0x10 */ - {0x370d, 0xc0}, /* Reset value 0x00 */ - {0x3718, 0x88}, /* Reset value 0x80 */ - - /* PSRAM tweaks */ - {0x3781, 0x80}, /* Reset value 0x00 */ - {0x3784, 0x0c}, /* Reset value 0x00, based on OV2680_R1A_AM10.ovt */ - {0x3789, 0x60}, /* Reset value 0x50 */ - - /* BLC CTRL00 0x01 -> 0x81 set avg_weight to 8 */ - {0x4000, 0x81}, - - /* Set black level compensation range to 0 - 3 (default 0 - 11) */ - {0x4008, 0x00}, - {0x4009, 0x03}, - - /* VFIFO R2 0x00 -> 0x02 set Frame reset enable */ - {0x4602, 0x02}, - - /* MIPI ctrl CLK PREPARE MIN change from 0x26 (38) -> 0x36 (54) */ - {0x481f, 0x36}, - - /* MIPI ctrl CLK LPX P MIN change from 0x32 (50) -> 0x36 (54) */ - {0x4825, 0x36}, - - /* R ISP CTRL2 0x20 -> 0x30, set sof_sel bit */ - {0x5002, 0x30}, - - /* - * Window CONTROL 0x00 -> 0x01, enable manual window control, - * this is necessary for full size flip and mirror support. - */ - {0x5708, 0x01}, - - /* - * DPC CTRL0 0x14 -> 0x3e, set enable_tail, enable_3x3_cluster - * and enable_general_tail bits based OV2680_R1A_AM10.ovt. - */ - {0x5780, 0x3e}, - - /* DPC MORE CONNECTION CASE THRE 0x0c (12) -> 0x02 (2) */ - {0x5788, 0x02}, - - /* DPC GAIN LIST1 0x0f (15) -> 0x08 (8) */ - {0x578e, 0x08}, - - /* DPC GAIN LIST2 0x3f (63) -> 0x0c (12) */ - {0x578f, 0x0c}, - - /* DPC THRE RATIO 0x04 (4) -> 0x00 (0) */ - {0x5792, 0x00}, - - {} -}; - -#endif |