diff options
Diffstat (limited to 'drivers/staging/wimax/i2400m/usb-fw.c')
| -rw-r--r-- | drivers/staging/wimax/i2400m/usb-fw.c | 365 |
1 files changed, 0 insertions, 365 deletions
diff --git a/drivers/staging/wimax/i2400m/usb-fw.c b/drivers/staging/wimax/i2400m/usb-fw.c deleted file mode 100644 index 27ab233650d5..000000000000 --- a/drivers/staging/wimax/i2400m/usb-fw.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * Intel Wireless WiMAX Connection 2400m - * Firmware uploader's USB specifics - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Yanir Lubetkin <yanirx.lubetkin@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - bus generic/specific split - * - * THE PROCEDURE - * - * See fw.c for the generic description of this procedure. - * - * This file implements only the USB specifics. It boils down to how - * to send a command and waiting for an acknowledgement from the - * device. - * - * This code (and process) is single threaded. It assumes it is the - * only thread poking around (guaranteed by fw.c). - * - * COMMAND EXECUTION - * - * A write URB is posted with the buffer to the bulk output endpoint. - * - * ACK RECEPTION - * - * We just post a URB to the notification endpoint and wait for - * data. We repeat until we get all the data we expect (as indicated - * by the call from the bus generic code). - * - * The data is not read from the bulk in endpoint for boot mode. - * - * ROADMAP - * - * i2400mu_bus_bm_cmd_send - * i2400m_bm_cmd_prepare... - * i2400mu_tx_bulk_out - * - * i2400mu_bus_bm_wait_for_ack - * i2400m_notif_submit - */ -#include <linux/usb.h> -#include <linux/gfp.h> -#include "i2400m-usb.h" - - -#define D_SUBMODULE fw -#include "usb-debug-levels.h" - - -/* - * Synchronous write to the device - * - * Takes care of updating EDC counts and thus, handle device errors. - */ -static -ssize_t i2400mu_tx_bulk_out(struct i2400mu *i2400mu, void *buf, size_t buf_size) -{ - int result; - struct device *dev = &i2400mu->usb_iface->dev; - int len; - struct usb_endpoint_descriptor *epd; - int pipe, do_autopm = 1; - - result = usb_autopm_get_interface(i2400mu->usb_iface); - if (result < 0) { - dev_err(dev, "BM-CMD: can't get autopm: %d\n", result); - do_autopm = 0; - } - epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out); - pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress); -retry: - result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, 200); - switch (result) { - case 0: - if (len != buf_size) { - dev_err(dev, "BM-CMD: short write (%u B vs %zu " - "expected)\n", len, buf_size); - result = -EIO; - break; - } - result = len; - break; - case -EPIPE: - /* - * Stall -- maybe the device is choking with our - * requests. Clear it and give it some time. If they - * happen to often, it might be another symptom, so we - * reset. - * - * No error handling for usb_clear_halt(0; if it - * works, the retry works; if it fails, this switch - * does the error handling for us. - */ - if (edc_inc(&i2400mu->urb_edc, - 10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "BM-CMD: too many stalls in " - "URB; resetting device\n"); - usb_queue_reset_device(i2400mu->usb_iface); - } else { - usb_clear_halt(i2400mu->usb_dev, pipe); - msleep(10); /* give the device some time */ - goto retry; - } - fallthrough; - case -EINVAL: /* while removing driver */ - case -ENODEV: /* dev disconnect ... */ - case -ENOENT: /* just ignore it */ - case -ESHUTDOWN: /* and exit */ - case -ECONNRESET: - result = -ESHUTDOWN; - break; - case -ETIMEDOUT: /* bah... */ - break; - default: /* any other? */ - if (edc_inc(&i2400mu->urb_edc, - EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { - dev_err(dev, "BM-CMD: maximum errors in " - "URB exceeded; resetting device\n"); - usb_queue_reset_device(i2400mu->usb_iface); - result = -ENODEV; - break; - } - dev_err(dev, "BM-CMD: URB error %d, retrying\n", - result); - goto retry; - } - if (do_autopm) - usb_autopm_put_interface(i2400mu->usb_iface); - return result; -} - - -/* - * Send a boot-mode command over the bulk-out pipe - * - * Command can be a raw command, which requires no preparation (and - * which might not even be following the command format). Checks that - * the right amount of data was transferred. - * - * To satisfy USB requirements (no onstack, vmalloc or in data segment - * buffers), we copy the command to i2400m->bm_cmd_buf and send it from - * there. - * - * @flags: pass thru from i2400m_bm_cmd() - * @return: cmd_size if ok, < 0 errno code on error. - */ -ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *i2400m, - const struct i2400m_bootrom_header *_cmd, - size_t cmd_size, int flags) -{ - ssize_t result; - struct device *dev = i2400m_dev(i2400m); - struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); - int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd); - struct i2400m_bootrom_header *cmd; - size_t cmd_size_a = ALIGN(cmd_size, 16); /* USB restriction */ - - d_fnstart(8, dev, "(i2400m %p cmd %p size %zu)\n", - i2400m, _cmd, cmd_size); - result = -E2BIG; - if (cmd_size > I2400M_BM_CMD_BUF_SIZE) - goto error_too_big; - if (_cmd != i2400m->bm_cmd_buf) - memmove(i2400m->bm_cmd_buf, _cmd, cmd_size); - cmd = i2400m->bm_cmd_buf; - if (cmd_size_a > cmd_size) /* Zero pad space */ - memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size); - if ((flags & I2400M_BM_CMD_RAW) == 0) { - if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0)) - dev_warn(dev, "SW BUG: response_required == 0\n"); - i2400m_bm_cmd_prepare(cmd); - } - result = i2400mu_tx_bulk_out(i2400mu, i2400m->bm_cmd_buf, cmd_size); - if (result < 0) { - dev_err(dev, "boot-mode cmd %d: cannot send: %zd\n", - opcode, result); - goto error_cmd_send; - } - if (result != cmd_size) { /* all was transferred? */ - dev_err(dev, "boot-mode cmd %d: incomplete transfer " - "(%zd vs %zu submitted)\n", opcode, result, cmd_size); - result = -EIO; - goto error_cmd_size; - } -error_cmd_size: -error_cmd_send: -error_too_big: - d_fnend(8, dev, "(i2400m %p cmd %p size %zu) = %zd\n", - i2400m, _cmd, cmd_size, result); - return result; -} - - -static -void __i2400mu_bm_notif_cb(struct urb *urb) -{ - complete(urb->context); -} - - -/* - * submit a read to the notification endpoint - * - * @i2400m: device descriptor - * @urb: urb to use - * @completion: completion variable to complete when done - * - * Data is always read to i2400m->bm_ack_buf - */ -static -int i2400mu_notif_submit(struct i2400mu *i2400mu, struct urb *urb, - struct completion *completion) -{ - struct i2400m *i2400m = &i2400mu->i2400m; - struct usb_endpoint_descriptor *epd; - int pipe; - - epd = usb_get_epd(i2400mu->usb_iface, - i2400mu->endpoint_cfg.notification); - pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress); - usb_fill_int_urb(urb, i2400mu->usb_dev, pipe, - i2400m->bm_ack_buf, I2400M_BM_ACK_BUF_SIZE, - __i2400mu_bm_notif_cb, completion, - epd->bInterval); - return usb_submit_urb(urb, GFP_KERNEL); -} - - -/* - * Read an ack from the notification endpoint - * - * @i2400m: - * @_ack: pointer to where to store the read data - * @ack_size: how many bytes we should read - * - * Returns: < 0 errno code on error; otherwise, amount of received bytes. - * - * Submits a notification read, appends the read data to the given ack - * buffer and then repeats (until @ack_size bytes have been - * received). - */ -ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *i2400m, - struct i2400m_bootrom_header *_ack, - size_t ack_size) -{ - ssize_t result = -ENOMEM; - struct device *dev = i2400m_dev(i2400m); - struct i2400mu *i2400mu = container_of(i2400m, struct i2400mu, i2400m); - struct urb notif_urb; - void *ack = _ack; - size_t offset, len; - long val; - int do_autopm = 1; - DECLARE_COMPLETION_ONSTACK(notif_completion); - - d_fnstart(8, dev, "(i2400m %p ack %p size %zu)\n", - i2400m, ack, ack_size); - BUG_ON(_ack == i2400m->bm_ack_buf); - result = usb_autopm_get_interface(i2400mu->usb_iface); - if (result < 0) { - dev_err(dev, "BM-ACK: can't get autopm: %d\n", (int) result); - do_autopm = 0; - } - usb_init_urb(¬if_urb); /* ready notifications */ - usb_get_urb(¬if_urb); - offset = 0; - while (offset < ack_size) { - init_completion(¬if_completion); - result = i2400mu_notif_submit(i2400mu, ¬if_urb, - ¬if_completion); - if (result < 0) - goto error_notif_urb_submit; - val = wait_for_completion_interruptible_timeout( - ¬if_completion, HZ); - if (val == 0) { - result = -ETIMEDOUT; - usb_kill_urb(¬if_urb); /* Timedout */ - goto error_notif_wait; - } - if (val == -ERESTARTSYS) { - result = -EINTR; /* Interrupted */ - usb_kill_urb(¬if_urb); - goto error_notif_wait; - } - result = notif_urb.status; /* How was the ack? */ - switch (result) { - case 0: - break; - case -EINVAL: /* while removing driver */ - case -ENODEV: /* dev disconnect ... */ - case -ENOENT: /* just ignore it */ - case -ESHUTDOWN: /* and exit */ - case -ECONNRESET: - result = -ESHUTDOWN; - goto error_dev_gone; - default: /* any other? */ - usb_kill_urb(¬if_urb); /* Timedout */ - if (edc_inc(&i2400mu->urb_edc, - EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) - goto error_exceeded; - dev_err(dev, "BM-ACK: URB error %d, " - "retrying\n", notif_urb.status); - continue; /* retry */ - } - if (notif_urb.actual_length == 0) { - d_printf(6, dev, "ZLP received, retrying\n"); - continue; - } - /* Got data, append it to the buffer */ - len = min(ack_size - offset, (size_t) notif_urb.actual_length); - memcpy(ack + offset, i2400m->bm_ack_buf, len); - offset += len; - } - result = offset; -error_notif_urb_submit: -error_notif_wait: -error_dev_gone: -out: - if (do_autopm) - usb_autopm_put_interface(i2400mu->usb_iface); - d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n", - i2400m, ack, ack_size, (long) result); - usb_put_urb(¬if_urb); - return result; - -error_exceeded: - dev_err(dev, "bm: maximum errors in notification URB exceeded; " - "resetting device\n"); - usb_queue_reset_device(i2400mu->usb_iface); - goto out; -} |