diff options
Diffstat (limited to 'drivers/thermal/mediatek')
-rw-r--r-- | drivers/thermal/mediatek/auxadc_thermal.c | 2 | ||||
-rw-r--r-- | drivers/thermal/mediatek/lvts_thermal.c | 175 |
2 files changed, 129 insertions, 48 deletions
diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c index c537aed71017..843214d30bd8 100644 --- a/drivers/thermal/mediatek/auxadc_thermal.c +++ b/drivers/thermal/mediatek/auxadc_thermal.c @@ -1282,8 +1282,6 @@ static int mtk_thermal_probe(struct platform_device *pdev) mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base, ctrl_id); - platform_set_drvdata(pdev, mt); - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt, &mtk_thermal_ops); if (IS_ERR(tzdev)) diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c index 054c965ae5e1..effd9b00a424 100644 --- a/drivers/thermal/mediatek/lvts_thermal.c +++ b/drivers/thermal/mediatek/lvts_thermal.c @@ -58,14 +58,19 @@ #define LVTS_PROTTC(__base) (__base + 0x00CC) #define LVTS_CLKEN(__base) (__base + 0x00E4) -#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38)) -#define LVTS_GROUP_INTERVAL 1 -#define LVTS_FILTER_INTERVAL 1 -#define LVTS_SENSOR_INTERVAL 1 -#define LVTS_HW_FILTER 0x2 +#define LVTS_PERIOD_UNIT 0 +#define LVTS_GROUP_INTERVAL 0 +#define LVTS_FILTER_INTERVAL 0 +#define LVTS_SENSOR_INTERVAL 0 +#define LVTS_HW_FILTER 0x0 #define LVTS_TSSEL_CONF 0x13121110 #define LVTS_CALSCALE_CONF 0x300 -#define LVTS_MONINT_CONF 0x9FBF7BDE +#define LVTS_MONINT_CONF 0x8300318C + +#define LVTS_MONINT_OFFSET_SENSOR0 0xC +#define LVTS_MONINT_OFFSET_SENSOR1 0x180 +#define LVTS_MONINT_OFFSET_SENSOR2 0x3000 +#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000 #define LVTS_INT_SENSOR0 0x0009001F #define LVTS_INT_SENSOR1 0x001203E0 @@ -81,8 +86,13 @@ #define LVTS_MSR_IMMEDIATE_MODE 0 #define LVTS_MSR_FILTERED_MODE 1 +#define LVTS_MSR_READ_TIMEOUT_US 400 +#define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2) + #define LVTS_HW_SHUTDOWN_MT8195 105000 +#define LVTS_MINIMUM_THRESHOLD 20000 + static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT; static int coeff_b = LVTS_COEFF_B; @@ -110,6 +120,8 @@ struct lvts_sensor { void __iomem *base; int id; int dt_id; + int low_thresh; + int high_thresh; }; struct lvts_ctrl { @@ -119,6 +131,8 @@ struct lvts_ctrl { int num_lvts_sensor; int mode; void __iomem *base; + int low_thresh; + int high_thresh; }; struct lvts_domain { @@ -190,7 +204,7 @@ static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td) int i; lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL); - if (!lvts_td->dom_dentry) + if (IS_ERR(lvts_td->dom_dentry)) return 0; for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { @@ -257,6 +271,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); void __iomem *msr = lvts_sensor->msr; u32 value; + int rc; /* * Measurement registers: @@ -269,7 +284,8 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) * 16 : Valid temperature * 15-0 : Raw temperature */ - value = readl(msr); + rc = readl_poll_timeout(msr, value, value & BIT(16), + LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US); /* * As the thermal zone temperature will read before the @@ -282,7 +298,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) * functionning temperature and directly jump to a system * shutdown. */ - if (!(value & BIT(16))) + if (rc) return -EAGAIN; *temp = lvts_raw_to_temp(value & 0xFFFF); @@ -290,32 +306,84 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp) return 0; } +static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl) +{ + u32 masks[] = { + LVTS_MONINT_OFFSET_SENSOR0, + LVTS_MONINT_OFFSET_SENSOR1, + LVTS_MONINT_OFFSET_SENSOR2, + LVTS_MONINT_OFFSET_SENSOR3, + }; + u32 value = 0; + int i; + + value = readl(LVTS_MONINT(lvts_ctrl->base)); + + for (i = 0; i < ARRAY_SIZE(masks); i++) { + if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) + value |= masks[i]; + else + value &= ~masks[i]; + } + + writel(value, LVTS_MONINT(lvts_ctrl->base)); +} + +static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high) +{ + int i; + + if (high > lvts_ctrl->high_thresh) + return true; + + for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) + if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh + && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh) + return false; + + return true; +} + static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) { struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz); + struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]); void __iomem *base = lvts_sensor->base; - u32 raw_low = lvts_temp_to_raw(low); + u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD); u32 raw_high = lvts_temp_to_raw(high); + bool should_update_thresh; + + lvts_sensor->low_thresh = low; + lvts_sensor->high_thresh = high; + + should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high); + if (should_update_thresh) { + lvts_ctrl->high_thresh = high; + lvts_ctrl->low_thresh = low; + } + lvts_update_irq_mask(lvts_ctrl); + + if (!should_update_thresh) + return 0; /* - * Hot to normal temperature threshold + * Low offset temperature threshold * - * LVTS_H2NTHRE + * LVTS_OFFSETL * * Bits: * * 14-0 : Raw temperature for threshold */ - if (low != -INT_MAX) { - pr_debug("%s: Setting low limit temperature interrupt: %d\n", - thermal_zone_device_type(tz), low); - writel(raw_low, LVTS_H2NTHRE(base)); - } + pr_debug("%s: Setting low limit temperature interrupt: %d\n", + thermal_zone_device_type(tz), low); + writel(raw_low, LVTS_OFFSETL(base)); /* - * Hot temperature threshold + * High offset temperature threshold * - * LVTS_HTHRE + * LVTS_OFFSETH * * Bits: * @@ -323,7 +391,7 @@ static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high) */ pr_debug("%s: Setting high limit temperature interrupt: %d\n", thermal_zone_device_type(tz), high); - writel(raw_high, LVTS_HTHRE(base)); + writel(raw_high, LVTS_OFFSETH(base)); return 0; } @@ -451,7 +519,7 @@ static irqreturn_t lvts_irq_handler(int irq, void *data) for (i = 0; i < lvts_td->num_lvts_ctrl; i++) { - aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl); + aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]); if (aux != IRQ_HANDLED) continue; @@ -521,6 +589,9 @@ static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl, */ lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ? imm_regs[i] : msr_regs[i]; + + lvts_sensor[i].low_thresh = INT_MIN; + lvts_sensor[i].high_thresh = INT_MIN; }; lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor; @@ -688,6 +759,9 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td, */ lvts_ctrl[i].hw_tshut_raw_temp = lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp); + + lvts_ctrl[i].low_thresh = INT_MIN; + lvts_ctrl[i].high_thresh = INT_MIN; } /* @@ -897,24 +971,6 @@ static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl) writel(value, LVTS_MSRCTL0(lvts_ctrl->base)); /* - * LVTS_MSRCTL1 : Measurement control - * - * Bits: - * - * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 - * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 - * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 - * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 - * - * That configuration will ignore the filtering and the delays - * introduced below in MONCTL1 and MONCTL2 - */ - if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { - value = BIT(9) | BIT(6) | BIT(5) | BIT(4); - writel(value, LVTS_MSRCTL1(lvts_ctrl->base)); - } - - /* * LVTS_MONCTL1 : Period unit and group interval configuration * * The clock source of LVTS thermal controller is 26MHz. @@ -979,6 +1035,15 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl) struct thermal_zone_device *tz; u32 sensor_map = 0; int i; + /* + * Bitmaps to enable each sensor on immediate and filtered modes, as + * described in MSRCTL1 and MONCTL0 registers below, respectively. + */ + u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) }; + u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) }; + + u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ? + sensor_imm_bitmap : sensor_filt_bitmap; for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) { @@ -1016,20 +1081,38 @@ static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl) * map, so we can enable the temperature monitoring in * the hardware thermal controller. */ - sensor_map |= BIT(i); + sensor_map |= sensor_bitmap[i]; } /* - * Bits: - * 9: Single point access flow - * 0-3: Enable sensing point 0-3 - * * The initialization of the thermal zones give us * which sensor point to enable. If any thermal zone * was not described in the device tree, it won't be * enabled here in the sensor map. */ - writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); + if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) { + /* + * LVTS_MSRCTL1 : Measurement control + * + * Bits: + * + * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3 + * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2 + * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1 + * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0 + * + * That configuration will ignore the filtering and the delays + * introduced in MONCTL1 and MONCTL2 + */ + writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base)); + } else { + /* + * Bits: + * 9: Single point access flow + * 0-3: Enable sensing point 0-3 + */ + writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base)); + } return 0; } @@ -1138,7 +1221,7 @@ static int lvts_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) - return dev_err_probe(dev, irq, "No irq resource\n"); + return irq; ret = lvts_domain_init(dev, lvts_td, lvts_data); if (ret) |