diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_men_mcb.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_men_mcb.c | 212 |
1 files changed, 155 insertions, 57 deletions
diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c index f46ca13ff4aa..dc9e093b1cb3 100644 --- a/drivers/tty/serial/8250/8250_men_mcb.c +++ b/drivers/tty/serial/8250/8250_men_mcb.c @@ -12,11 +12,42 @@ #define MEN_UART_ID_Z057 0x39 #define MEN_UART_ID_Z125 0x7d -#define MEN_UART_MEM_SIZE 0x10 +/* + * IP Cores Z025 and Z057 can have up to 4 UART + * The UARTs available are stored in a global + * register saved in physical address + 0x40 + * Is saved as follows: + * + * 7 0 + * +------+-------+-------+-------+-------+-------+-------+-------+ + * |UART4 | UART3 | UART2 | UART1 | U4irq | U3irq | U2irq | U1irq | + * +------+-------+-------+-------+-------+-------+-------+-------+ + */ +#define MEN_UART1_MASK 0x01 +#define MEN_UART2_MASK 0x02 +#define MEN_UART3_MASK 0x04 +#define MEN_UART4_MASK 0x08 + +#define MEN_Z125_UARTS_AVAILABLE 0x01 + +#define MEN_Z025_MAX_UARTS 4 +#define MEN_UART_MEM_SIZE 0x10 +#define MEM_UART_REGISTER_SIZE 0x01 +#define MEN_Z025_REGISTER_OFFSET 0x40 + +#define MEN_UART1_OFFSET 0 +#define MEN_UART2_OFFSET (MEN_UART1_OFFSET + MEN_UART_MEM_SIZE) +#define MEN_UART3_OFFSET (MEN_UART2_OFFSET + MEN_UART_MEM_SIZE) +#define MEN_UART4_OFFSET (MEN_UART3_OFFSET + MEN_UART_MEM_SIZE) + +#define MEN_READ_REGISTER(addr) readb(addr) + +#define MAX_PORTS 4 struct serial_8250_men_mcb_data { - struct uart_8250_port uart; - int line; + int num_ports; + int line[MAX_PORTS]; + unsigned int offset[MAX_PORTS]; }; /* @@ -37,10 +68,10 @@ static u32 men_lookup_uartclk(struct mcb_device *mdev) clkval = 1041666; else if (strncmp(mdev->bus->name, "F216", 4) == 0) clkval = 1843200; - else if (strncmp(mdev->bus->name, "G215", 4) == 0) - clkval = 1843200; else if (strncmp(mdev->bus->name, "F210", 4) == 0) clkval = 115200; + else if (strstr(mdev->bus->name, "215")) + clkval = 1843200; else dev_info(&mdev->dev, "board not detected, using default uartclk\n"); @@ -50,16 +81,98 @@ static u32 men_lookup_uartclk(struct mcb_device *mdev) return clkval; } -static int get_num_ports(struct mcb_device *mdev, - void __iomem *membase) +static int read_uarts_available_from_register(struct resource *mem_res, + u8 *uarts_available) +{ + void __iomem *mem; + int reg_value; + + if (!request_mem_region(mem_res->start + MEN_Z025_REGISTER_OFFSET, + MEM_UART_REGISTER_SIZE, KBUILD_MODNAME)) { + return -EBUSY; + } + + mem = ioremap(mem_res->start + MEN_Z025_REGISTER_OFFSET, + MEM_UART_REGISTER_SIZE); + if (!mem) { + release_mem_region(mem_res->start + MEN_Z025_REGISTER_OFFSET, + MEM_UART_REGISTER_SIZE); + return -ENOMEM; + } + + reg_value = MEN_READ_REGISTER(mem); + + iounmap(mem); + + release_mem_region(mem_res->start + MEN_Z025_REGISTER_OFFSET, + MEM_UART_REGISTER_SIZE); + + *uarts_available = reg_value >> 4; + + return 0; +} + +static int read_serial_data(struct mcb_device *mdev, + struct resource *mem_res, + struct serial_8250_men_mcb_data *serial_data) +{ + u8 uarts_available; + int count = 0; + int mask; + int res; + int i; + + res = read_uarts_available_from_register(mem_res, &uarts_available); + if (res < 0) + return res; + + for (i = 0; i < MAX_PORTS; i++) { + mask = 0x1 << i; + switch (uarts_available & mask) { + case MEN_UART1_MASK: + serial_data->offset[count] = MEN_UART1_OFFSET; + count++; + break; + case MEN_UART2_MASK: + serial_data->offset[count] = MEN_UART2_OFFSET; + count++; + break; + case MEN_UART3_MASK: + serial_data->offset[count] = MEN_UART3_OFFSET; + count++; + break; + case MEN_UART4_MASK: + serial_data->offset[count] = MEN_UART4_OFFSET; + count++; + break; + default: + return -EINVAL; + } + } + + if (count <= 0 || count > MAX_PORTS) { + dev_err(&mdev->dev, "unexpected number of ports: %u\n", + count); + return -ENODEV; + } + + serial_data->num_ports = count; + + return 0; +} + +static int init_serial_data(struct mcb_device *mdev, + struct resource *mem_res, + struct serial_8250_men_mcb_data *serial_data) { switch (mdev->id) { case MEN_UART_ID_Z125: - return 1U; + serial_data->num_ports = 1; + serial_data->offset[0] = 0; + return 0; case MEN_UART_ID_Z025: - return readb(membase) >> 4; case MEN_UART_ID_Z057: - return 4U; + return read_serial_data(mdev, mem_res, serial_data); default: dev_err(&mdev->dev, "no supported device!\n"); return -ENODEV; @@ -69,62 +182,54 @@ static int get_num_ports(struct mcb_device *mdev, static int serial_8250_men_mcb_probe(struct mcb_device *mdev, const struct mcb_device_id *id) { + struct uart_8250_port uart; struct serial_8250_men_mcb_data *data; struct resource *mem; - int num_ports; int i; - void __iomem *membase; + int res; mem = mcb_get_resource(mdev, IORESOURCE_MEM); if (mem == NULL) return -ENXIO; - membase = devm_ioremap_resource(&mdev->dev, mem); - if (IS_ERR(membase)) - return PTR_ERR_OR_ZERO(membase); - - num_ports = get_num_ports(mdev, membase); - dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n", - mdev->id, num_ports); - - if (num_ports <= 0 || num_ports > 4) { - dev_err(&mdev->dev, "unexpected number of ports: %u\n", - num_ports); - return -ENODEV; - } - - data = devm_kcalloc(&mdev->dev, num_ports, + data = devm_kzalloc(&mdev->dev, sizeof(struct serial_8250_men_mcb_data), GFP_KERNEL); if (!data) return -ENOMEM; + res = init_serial_data(mdev, mem, data); + if (res < 0) + return res; + + dev_dbg(&mdev->dev, "found a 16z%03u with %u ports\n", + mdev->id, data->num_ports); + mcb_set_drvdata(mdev, data); - for (i = 0; i < num_ports; i++) { - data[i].uart.port.dev = mdev->dma_dev; - spin_lock_init(&data[i].uart.port.lock); - - data[i].uart.port.type = PORT_16550; - data[i].uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ - | UPF_FIXED_TYPE; - data[i].uart.port.iotype = UPIO_MEM; - data[i].uart.port.uartclk = men_lookup_uartclk(mdev); - data[i].uart.port.regshift = 0; - data[i].uart.port.irq = mcb_get_irq(mdev); - data[i].uart.port.membase = membase; - data[i].uart.port.fifosize = 60; - data[i].uart.port.mapbase = (unsigned long) mem->start - + i * MEN_UART_MEM_SIZE; - data[i].uart.port.iobase = data[i].uart.port.mapbase; + for (i = 0; i < data->num_ports; i++) { + memset(&uart, 0, sizeof(struct uart_8250_port)); + spin_lock_init(&uart.port.lock); + + uart.port.flags = UPF_SKIP_TEST | + UPF_SHARE_IRQ | + UPF_BOOT_AUTOCONF | + UPF_IOREMAP; + uart.port.iotype = UPIO_MEM; + uart.port.uartclk = men_lookup_uartclk(mdev); + uart.port.irq = mcb_get_irq(mdev); + uart.port.mapbase = (unsigned long) mem->start + + data->offset[i]; /* ok, register the port */ - data[i].line = serial8250_register_8250_port(&data[i].uart); - if (data[i].line < 0) { + res = serial8250_register_8250_port(&uart); + if (res < 0) { dev_err(&mdev->dev, "unable to register UART port\n"); - return data[i].line; + return res; } - dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data[i].line); + + data->line[i] = res; + dev_info(&mdev->dev, "found MCB UART: ttyS%d\n", data->line[i]); } return 0; @@ -132,20 +237,14 @@ static int serial_8250_men_mcb_probe(struct mcb_device *mdev, static void serial_8250_men_mcb_remove(struct mcb_device *mdev) { - int num_ports, i; + int i; struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev); if (!data) return; - num_ports = get_num_ports(mdev, data[0].uart.port.membase); - if (num_ports <= 0 || num_ports > 4) { - dev_err(&mdev->dev, "error retrieving number of ports!\n"); - return; - } - - for (i = 0; i < num_ports; i++) - serial8250_unregister_port(data[i].line); + for (i = 0; i < data->num_ports; i++) + serial8250_unregister_port(data->line[i]); } static const struct mcb_device_id serial_8250_men_mcb_ids[] = { @@ -159,7 +258,6 @@ MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids); static struct mcb_driver mcb_driver = { .driver = { .name = "8250_men_mcb", - .owner = THIS_MODULE, }, .probe = serial_8250_men_mcb_probe, .remove = serial_8250_men_mcb_remove, |