summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/8250_omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
-rw-r--r--drivers/tty/serial/8250/8250_omap.c52
1 files changed, 30 insertions, 22 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 41b8c6b27136..3f33014022f0 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -157,7 +157,11 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg)
return readl(up->port.membase + (reg << up->port.regshift));
}
-static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+/*
+ * Called on runtime PM resume path from omap8250_restore_regs(), and
+ * omap8250_set_mctrl().
+ */
+static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_8250_port *up = up_to_u8250p(port);
struct omap8250_priv *priv = up->port.private_data;
@@ -181,6 +185,20 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
}
+static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ int err;
+
+ err = pm_runtime_resume_and_get(port->dev);
+ if (err)
+ return;
+
+ __omap8250_set_mctrl(port, mctrl);
+
+ pm_runtime_mark_last_busy(port->dev);
+ pm_runtime_put_autosuspend(port->dev);
+}
+
/*
* Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460)
* The access to uart register after MDR1 Access
@@ -193,27 +211,10 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void omap_8250_mdr1_errataset(struct uart_8250_port *up,
struct omap8250_priv *priv)
{
- u8 timeout = 255;
-
serial_out(up, UART_OMAP_MDR1, priv->mdr1);
udelay(2);
serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_RCVR);
- /*
- * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
- * TX_FIFO_E bit is 1.
- */
- while (UART_LSR_THRE != (serial_in(up, UART_LSR) &
- (UART_LSR_THRE | UART_LSR_DR))) {
- timeout--;
- if (!timeout) {
- /* Should *never* happen. we warn and carry on */
- dev_crit(up->port.dev, "Errata i202: timedout %x\n",
- serial_in(up, UART_LSR));
- break;
- }
- udelay(1);
- }
}
static void omap_8250_get_divisor(struct uart_port *port, unsigned int baud,
@@ -292,6 +293,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
{
struct omap8250_priv *priv = up->port.private_data;
struct uart_8250_dma *dma = up->dma;
+ u8 mcr = serial8250_in_MCR(up);
if (dma && dma->tx_running) {
/*
@@ -308,7 +310,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial8250_out_MCR(up, UART_MCR_TCRTLR);
+ serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR);
serial_out(up, UART_FCR, up->fcr);
omap8250_update_scr(up, priv);
@@ -324,7 +326,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_LCR, 0);
/* drop TCR + TLR access, we setup XON/XOFF later */
- serial8250_out_MCR(up, up->mcr);
+ serial8250_out_MCR(up, mcr);
+
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -341,7 +344,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
omap8250_update_mdr1(up, priv);
- up->port.ops->set_mctrl(&up->port, up->port.mctrl);
+ __omap8250_set_mctrl(&up->port, up->port.mctrl);
if (up->port.rs485.flags & SER_RS485_ENABLED)
serial8250_em485_stop_tx(up);
@@ -669,7 +672,6 @@ static int omap_8250_startup(struct uart_port *port)
pm_runtime_get_sync(port->dev);
- up->mcr = 0;
serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_out(up, UART_LCR, UART_LCR_WLEN8);
@@ -1458,9 +1460,15 @@ err:
static int omap8250_remove(struct platform_device *pdev)
{
struct omap8250_priv *priv = platform_get_drvdata(pdev);
+ int err;
+
+ err = pm_runtime_resume_and_get(&pdev->dev);
+ if (err)
+ return err;
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
+ flush_work(&priv->qos_work);
pm_runtime_disable(&pdev->dev);
serial8250_unregister_port(priv->line);
cpu_latency_qos_remove_request(&priv->pm_qos_request);