summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/amba-pl011.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
-rw-r--r--drivers/tty/serial/amba-pl011.c117
1 files changed, 26 insertions, 91 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3d569cd68f58..4ad721fb8405 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -52,6 +52,7 @@
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/io.h>
#include <asm/sizes.h>
@@ -67,30 +68,6 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
-
-#define UART_WA_SAVE_NR 14
-
-static void pl011_lockup_wa(unsigned long data);
-static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
- ST_UART011_DMAWM,
- ST_UART011_TIMEOUT,
- ST_UART011_LCRH_RX,
- UART011_IBRD,
- UART011_FBRD,
- ST_UART011_LCRH_TX,
- UART011_IFLS,
- ST_UART011_XFCR,
- ST_UART011_XON1,
- ST_UART011_XON2,
- ST_UART011_XOFF1,
- ST_UART011_XOFF2,
- UART011_CR,
- UART011_IMSC
-};
-
-static u32 uart_wa_regdata[UART_WA_SAVE_NR];
-static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
-
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
@@ -100,6 +77,7 @@ struct vendor_data {
bool oversampling;
bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
+ bool cts_event_workaround;
};
static struct vendor_data vendor_arm = {
@@ -109,6 +87,7 @@ static struct vendor_data vendor_arm = {
.lcrh_rx = UART011_LCRH,
.oversampling = false,
.dma_threshold = false,
+ .cts_event_workaround = false,
};
static struct vendor_data vendor_st = {
@@ -119,6 +98,7 @@ static struct vendor_data vendor_st = {
.oversampling = true,
.interrupt_may_hang = true,
.dma_threshold = true,
+ .cts_event_workaround = true,
};
static struct uart_amba_port *amba_ports[UART_NR];
@@ -1054,69 +1034,6 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
#define pl011_dma_flush_buffer NULL
#endif
-
-/*
- * pl011_lockup_wa
- * This workaround aims to break the deadlock situation
- * when after long transfer over uart in hardware flow
- * control, uart interrupt registers cannot be cleared.
- * Hence uart transfer gets blocked.
- *
- * It is seen that during such deadlock condition ICR
- * don't get cleared even on multiple write. This leads
- * pass_counter to decrease and finally reach zero. This
- * can be taken as trigger point to run this UART_BT_WA.
- *
- */
-static void pl011_lockup_wa(unsigned long data)
-{
- struct uart_amba_port *uap = amba_ports[0];
- void __iomem *base = uap->port.membase;
- struct circ_buf *xmit = &uap->port.state->xmit;
- struct tty_struct *tty = uap->port.state->port.tty;
- int buf_empty_retries = 200;
- int loop;
-
- /* Stop HCI layer from submitting data for tx */
- tty->hw_stopped = 1;
- while (!uart_circ_empty(xmit)) {
- if (buf_empty_retries-- == 0)
- break;
- udelay(100);
- }
-
- /* Backup registers */
- for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
- uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
-
- /* Disable UART so that FIFO data is flushed out */
- writew(0x00, uap->port.membase + UART011_CR);
-
- /* Soft reset UART module */
- if (uap->port.dev->platform_data) {
- struct amba_pl011_data *plat;
-
- plat = uap->port.dev->platform_data;
- if (plat->reset)
- plat->reset();
- }
-
- /* Restore registers */
- for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
- writew(uart_wa_regdata[loop] ,
- uap->port.membase + uart_wa_reg[loop]);
-
- /* Initialise the old status of the modem signals */
- uap->old_status = readw(uap->port.membase + UART01x_FR) &
- UART01x_FR_MODEM_ANY;
-
- if (readl(base + UART011_MIS) & 0x2)
- printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
-
- /* Start Tx/Rx */
- tty->hw_stopped = 0;
-}
-
static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1245,12 +1162,26 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
int handled = 0;
+ unsigned int dummy_read;
spin_lock_irqsave(&uap->port.lock, flags);
status = readw(uap->port.membase + UART011_MIS);
if (status) {
do {
+ if (uap->vendor->cts_event_workaround) {
+ /* workaround to make sure that all bits are unlocked.. */
+ writew(0x00, uap->port.membase + UART011_ICR);
+
+ /*
+ * WA: introduce 26ns(1 uart clk) delay before W1C;
+ * single apb access will incur 2 pclk(133.12Mhz) delay,
+ * so add 2 dummy reads
+ */
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ }
+
writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS),
uap->port.membase + UART011_ICR);
@@ -1267,11 +1198,8 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (status & UART011_TXIS)
pl011_tx_chars(uap);
- if (pass_counter-- == 0) {
- if (uap->interrupt_may_hang)
- tasklet_schedule(&pl011_lockup_tlet);
+ if (pass_counter-- == 0)
break;
- }
status = readw(uap->port.membase + UART011_MIS);
} while (status != 0);
@@ -1916,6 +1844,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
+ struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
@@ -1940,6 +1869,12 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto free;
}
+ pinctrl = devm_pinctrl_get_select_default(&dev->dev);
+ if (IS_ERR(pinctrl)) {
+ ret = PTR_ERR(pinctrl);
+ goto unmap;
+ }
+
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
ret = PTR_ERR(uap->clk);