diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.c | 6 | ||||
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 7 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/sifive.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/ucc_uart.c | 2 |
5 files changed, 7 insertions, 12 deletions
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 75f32f054ebb..84843e204a5e 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p) struct dw8250_port_data *pd = p->private_data; struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); - u32 reg; + u32 reg, old_dlf; pd->hw_rs485_support = dw8250_detect_rs485_hw(p); if (pd->hw_rs485_support) { @@ -270,9 +270,11 @@ void dw8250_setup_port(struct uart_port *p) dev_dbg(p->dev, "Designware UART version %c.%c%c\n", (reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff); + /* Preserve value written by firmware or bootloader */ + old_dlf = dw8250_readl_ext(p, DW_UART_DLF); dw8250_writel_ext(p, DW_UART_DLF, ~0U); reg = dw8250_readl_ext(p, DW_UART_DLF); - dw8250_writel_ext(p, DW_UART_DLF, 0); + dw8250_writel_ext(p, DW_UART_DLF, old_dlf); if (reg) { pd->dlf_size = fls(reg); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 444c74eeab7d..daaf2a64e7f1 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1681,13 +1681,6 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) if (ret) return ret; - /* - * Set pm_runtime status as ACTIVE so that wakeup_irq gets - * enabled/disabled from dev_pm_arm_wake_irq during system - * suspend/resume respectively. - */ - pm_runtime_set_active(&pdev->dev); - if (port->wakeup_irq > 0) { device_init_wakeup(&pdev->dev, true); ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7c9457962a3d..8b7a42e05d6d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -590,7 +590,7 @@ static void sci_start_tx(struct uart_port *port) dma_submit_error(s->cookie_tx)) { if (s->cfg->regtype == SCIx_RZ_SCIFA_REGTYPE) /* Switch irq from SCIF to DMA */ - disable_irq(s->irqs[SCIx_TXI_IRQ]); + disable_irq_nosync(s->irqs[SCIx_TXI_IRQ]); s->cookie_tx = 0; schedule_work(&s->work_tx); diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c index 1f565a216e74..a19db49327e2 100644 --- a/drivers/tty/serial/sifive.c +++ b/drivers/tty/serial/sifive.c @@ -811,7 +811,7 @@ static void sifive_serial_console_write(struct console *co, const char *s, local_irq_restore(flags); } -static int __init sifive_serial_console_setup(struct console *co, char *options) +static int sifive_serial_console_setup(struct console *co, char *options) { struct sifive_serial_port *ssp; int baud = SIFIVE_DEFAULT_BAUD_RATE; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 404230c1ebb2..0a370b9ea70b 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -59,7 +59,7 @@ static int firmware_loaded; /* #define LOOPBACK */ /* The major and minor device numbers are defined in - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE + * Documentation/admin-guide/devices.txt. For the QE * UART, we have major number 204 and minor numbers 46 - 49, which are the * same as for the CPM2. This decision was made because no Freescale part * has both a CPM and a QE. |