diff options
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/serial_base.h | 1 | ||||
-rw-r--r-- | drivers/tty/serial/serial_base_bus.c | 70 |
5 files changed, 63 insertions, 19 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 914e0e6251bf..3449f8790e46 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -497,6 +497,7 @@ static struct uart_8250_port *serial8250_setup_port(int index) up = &serial8250_ports[index]; up->port.line = index; + up->port.port_id = index; serial8250_init_port(up); if (!base_ops) @@ -1040,6 +1041,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up) uart_remove_one_port(&serial8250_reg, &uart->port); uart->port.ctrl_id = up->port.ctrl_id; + uart->port.port_id = up->port.port_id; uart->port.iobase = up->port.iobase; uart->port.membase = up->port.membase; uart->port.irq = up->port.irq; @@ -1202,6 +1204,7 @@ void serial8250_unregister_port(int line) uart->port.flags &= ~UPF_BOOT_AUTOCONF; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; + uart->port.port_id = line; uart->capabilities = 0; serial8250_init_port(uart); serial8250_apply_quirks(uart); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 16aeb1420137..483bb552cdc4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -703,9 +703,6 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) static void serial8250_clear_IER(struct uart_8250_port *up) { - /* Port locked to synchronize UART_IER access against the console. */ - lockdep_assert_held_once(&up->port.lock); - if (up->capabilities & UART_CAP_UUE) serial_out(up, UART_IER, UART_IER_UUE); else @@ -3278,6 +3275,7 @@ void serial8250_init_port(struct uart_8250_port *up) spin_lock_init(&port->lock); port->ctrl_id = 0; + port->pm = NULL; port->ops = &serial8250_pops; port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 4d80fae20177..c569a08b5b19 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1139,8 +1139,8 @@ static void lpuart_copy_rx_to_tty(struct lpuart_port *sport) unsigned long sr = lpuart32_read(&sport->port, UARTSTAT); if (sr & (UARTSTAT_PE | UARTSTAT_FE)) { - /* Read DR to clear the error flags */ - lpuart32_read(&sport->port, UARTDATA); + /* Clear the error flags */ + lpuart32_write(&sport->port, sr, UARTSTAT); if (sr & UARTSTAT_PE) sport->port.icount.parity++; diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index 9faac0ff6b89..c74c548f0db6 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -16,6 +16,7 @@ struct device; struct serial_ctrl_device { struct device dev; + struct ida port_ida; }; struct serial_port_device { diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c index 6ff59c89d867..3dfcf20c4eb6 100644 --- a/drivers/tty/serial/serial_base_bus.c +++ b/drivers/tty/serial/serial_base_bus.c @@ -10,6 +10,7 @@ #include <linux/container_of.h> #include <linux/device.h> +#include <linux/idr.h> #include <linux/module.h> #include <linux/serial_core.h> #include <linux/slab.h> @@ -19,11 +20,25 @@ static bool serial_base_initialized; +static const struct device_type serial_ctrl_type = { + .name = "ctrl", +}; + +static const struct device_type serial_port_type = { + .name = "port", +}; + static int serial_base_match(struct device *dev, struct device_driver *drv) { - int len = strlen(drv->name); + if (dev->type == &serial_ctrl_type && + str_has_prefix(drv->name, serial_ctrl_type.name)) + return 1; - return !strncmp(dev_name(dev), drv->name, len); + if (dev->type == &serial_port_type && + str_has_prefix(drv->name, serial_port_type.name)) + return 1; + + return 0; } static struct bus_type serial_base_bus_type = { @@ -48,7 +63,8 @@ static int serial_base_device_init(struct uart_port *port, struct device *parent_dev, const struct device_type *type, void (*release)(struct device *dev), - int id) + unsigned int ctrl_id, + unsigned int port_id) { device_initialize(dev); dev->type = type; @@ -61,12 +77,15 @@ static int serial_base_device_init(struct uart_port *port, return -EPROBE_DEFER; } - return dev_set_name(dev, "%s.%s.%d", type->name, dev_name(port->dev), id); -} + if (type == &serial_ctrl_type) + return dev_set_name(dev, "%s:%d", dev_name(port->dev), ctrl_id); -static const struct device_type serial_ctrl_type = { - .name = "ctrl", -}; + if (type == &serial_port_type) + return dev_set_name(dev, "%s:%d.%d", dev_name(port->dev), + ctrl_id, port_id); + + return -EINVAL; +} static void serial_base_ctrl_release(struct device *dev) { @@ -81,6 +100,7 @@ void serial_base_ctrl_device_remove(struct serial_ctrl_device *ctrl_dev) return; device_del(&ctrl_dev->dev); + put_device(&ctrl_dev->dev); } struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port, @@ -93,10 +113,12 @@ struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port, if (!ctrl_dev) return ERR_PTR(-ENOMEM); + ida_init(&ctrl_dev->port_ida); + err = serial_base_device_init(port, &ctrl_dev->dev, parent, &serial_ctrl_type, serial_base_ctrl_release, - port->ctrl_id); + port->ctrl_id, 0); if (err) goto err_put_device; @@ -112,10 +134,6 @@ err_put_device: return ERR_PTR(err); } -static const struct device_type serial_port_type = { - .name = "port", -}; - static void serial_base_port_release(struct device *dev) { struct serial_port_device *port_dev = to_serial_base_port_device(dev); @@ -127,16 +145,31 @@ struct serial_port_device *serial_base_port_add(struct uart_port *port, struct serial_ctrl_device *ctrl_dev) { struct serial_port_device *port_dev; + int min = 0, max = -1; /* Use -1 for max to apply IDA defaults */ int err; port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); if (!port_dev) return ERR_PTR(-ENOMEM); + /* Device driver specified port_id vs automatic assignment? */ + if (port->port_id) { + min = port->port_id; + max = port->port_id; + } + + err = ida_alloc_range(&ctrl_dev->port_ida, min, max, GFP_KERNEL); + if (err < 0) { + kfree(port_dev); + return ERR_PTR(err); + } + + port->port_id = err; + err = serial_base_device_init(port, &port_dev->dev, &ctrl_dev->dev, &serial_port_type, serial_base_port_release, - port->line); + port->ctrl_id, port->port_id); if (err) goto err_put_device; @@ -150,16 +183,25 @@ struct serial_port_device *serial_base_port_add(struct uart_port *port, err_put_device: put_device(&port_dev->dev); + ida_free(&ctrl_dev->port_ida, port->port_id); return ERR_PTR(err); } void serial_base_port_device_remove(struct serial_port_device *port_dev) { + struct serial_ctrl_device *ctrl_dev; + struct device *parent; + if (!port_dev) return; + parent = port_dev->dev.parent; + ctrl_dev = to_serial_base_ctrl_device(parent); + device_del(&port_dev->dev); + ida_free(&ctrl_dev->port_ida, port_dev->port->port_id); + put_device(&port_dev->dev); } static int serial_base_init(void) |