summaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c97
1 files changed, 84 insertions, 13 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1af04bdeaf0c..a815fd2cc5e7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -39,6 +39,9 @@
#endif
#endif
+#define USB_VENDOR_GENESYS_LOGIC 0x05e3
+#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
+
struct usb_port {
struct usb_device *child;
struct device dev;
@@ -86,6 +89,8 @@ struct usb_hub {
unsigned quiescing:1;
unsigned disconnected:1;
+ unsigned quirk_check_port_auto_suspend:1;
+
unsigned has_indicators:1;
u8 indicator[USB_MAXCHILDREN];
struct delayed_work leds;
@@ -736,7 +741,6 @@ static void hub_tt_work(struct work_struct *work)
struct usb_hub *hub =
container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
- int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
while (!list_empty(&hub->tt.clear_list)) {
@@ -746,9 +750,6 @@ static void hub_tt_work(struct work_struct *work)
const struct hc_driver *drv;
int status;
- if (!hub->quiescing && --limit < 0)
- break;
-
next = hub->tt.clear_list.next;
clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
@@ -1612,6 +1613,41 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+ /*
+ * Set default autosuspend delay as 0 to speedup bus suspend,
+ * based on the below considerations:
+ *
+ * - Unlike other drivers, the hub driver does not rely on the
+ * autosuspend delay to provide enough time to handle a wakeup
+ * event, and the submitted status URB is just to check future
+ * change on hub downstream ports, so it is safe to do it.
+ *
+ * - The patch might cause one or more auto supend/resume for
+ * below very rare devices when they are plugged into hub
+ * first time:
+ *
+ * devices having trouble initializing, and disconnect
+ * themselves from the bus and then reconnect a second
+ * or so later
+ *
+ * devices just for downloading firmware, and disconnects
+ * themselves after completing it
+ *
+ * For these quite rare devices, their drivers may change the
+ * autosuspend delay of their parent hub in the probe() to one
+ * appropriate value to avoid the subtle problem if someone
+ * does care it.
+ *
+ * - The patch may cause one or more auto suspend/resume on
+ * hub during running 'lsusb', but it is probably too
+ * infrequent to worry about.
+ *
+ * - Change autosuspend delay of hub can avoid unnecessary auto
+ * suspend timer for hub, also may decrease power consumption
+ * of USB bus.
+ */
+ pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
+
/* Hubs have proper suspend/resume support. */
usb_enable_autosuspend(hdev);
@@ -1670,6 +1706,9 @@ descriptor_error:
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs++;
+ if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
+ hub->quirk_check_port_auto_suspend = 1;
+
if (hub_configure(hub, endpoint) >= 0)
return 0;
@@ -2012,7 +2051,7 @@ static void show_string(struct usb_device *udev, char *id, char *string)
{
if (!string)
return;
- dev_printk(KERN_INFO, &udev->dev, "%s: %s\n", id, string);
+ dev_info(&udev->dev, "%s: %s\n", id, string);
}
static void announce_device(struct usb_device *udev)
@@ -2879,6 +2918,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
udev->do_remote_wakeup);
usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ udev->port_is_suspended = 1;
msleep(10);
}
usb_mark_last_busy(hub->hdev);
@@ -3043,6 +3083,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
SuspendCleared:
if (status == 0) {
+ udev->port_is_suspended = 0;
if (hub_is_superspeed(hub->hdev)) {
if (portchange & USB_PORT_STAT_C_LINK_STATE)
clear_port_feature(hub->hdev, port1,
@@ -3126,6 +3167,21 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
#endif
+static int check_ports_changed(struct usb_hub *hub)
+{
+ int port1;
+
+ for (port1 = 1; port1 <= hub->hdev->maxchild; ++port1) {
+ u16 portstatus, portchange;
+ int status;
+
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (!status && portchange)
+ return 1;
+ }
+ return 0;
+}
+
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
@@ -3144,6 +3200,16 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
return -EBUSY;
}
}
+
+ if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
+ /* check if there are changes pending on hub ports */
+ if (check_ports_changed(hub)) {
+ if (PMSG_IS_AUTO(msg))
+ return -EBUSY;
+ pm_wakeup_event(&hdev->dev, 2000);
+ }
+ }
+
if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
/* Enable hub to send remote wakeup for all ports. */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -3972,6 +4038,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
if (retval)
goto fail;
+ if (hcd->phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->phy, udev->speed);
+
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
@@ -4166,8 +4235,12 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
}
/* Disconnect any existing devices under this port */
- if (udev)
+ if (udev) {
+ if (hcd->phy && !hdev->parent &&
+ !(portstatus & USB_PORT_STAT_CONNECTION))
+ usb_phy_notify_disconnect(hcd->phy, udev->speed);
usb_disconnect(&hub->ports[port1 - 1]->child);
+ }
clear_bit(port1, hub->change_bits);
/* We can forget about a "removed" device when there's a physical
@@ -4190,13 +4263,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
}
}
- if (hcd->phy && !hdev->parent) {
- if (portstatus & USB_PORT_STAT_CONNECTION)
- usb_phy_notify_connect(hcd->phy, port1);
- else
- usb_phy_notify_disconnect(hcd->phy, port1);
- }
-
/* Return now if debouncing failed or nothing is connected or
* the device was "removed".
*/
@@ -4648,6 +4714,11 @@ static int hub_thread(void *__unused)
}
static const struct usb_device_id hub_id_table[] = {
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_INT_CLASS,
+ .idVendor = USB_VENDOR_GENESYS_LOGIC,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,