diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 59 | ||||
-rw-r--r-- | drivers/usb/dwc3/drd.c | 50 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-st.c | 2 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 22 | ||||
-rw-r--r-- | drivers/usb/dwc3/host.c | 10 |
5 files changed, 77 insertions, 66 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index ea51624461b5..1f348bc867c2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -23,6 +23,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/of.h> +#include <linux/of_graph.h> #include <linux/acpi.h> #include <linux/pinctrl/consumer.h> #include <linux/reset.h> @@ -85,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) * mode. If the controller supports DRD but the dr_mode is not * specified or set to OTG, then set the mode to peripheral. */ - if (mode == USB_DR_MODE_OTG && + if (mode == USB_DR_MODE_OTG && !dwc->edev && (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || !device_property_read_bool(dwc->dev, "usb-role-switch")) && !DWC3_VER_IS_PRIOR(DWC3, 330A)) @@ -1690,6 +1691,56 @@ static void dwc3_check_params(struct dwc3 *dwc) } } +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + struct device_node *np_phy; + struct extcon_dev *edev = NULL; + const char *name; + + if (device_property_read_bool(dev, "extcon")) + return extcon_get_edev_by_phandle(dev, 0); + + /* + * Device tree platforms should get extcon via phandle. + * On ACPI platforms, we get the name from a device property. + * This device property is for kernel internal use only and + * is expected to be set by the glue code. + */ + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) + return extcon_get_extcon_dev(name); + + /* + * Check explicitly if "usb-role-switch" is used since + * extcon_find_edev_by_node() can not be used to check the absence of + * an extcon device. In the absence of an device it will always return + * EPROBE_DEFER. + */ + if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) && + device_property_read_bool(dev, "usb-role-switch")) + return NULL; + + /* + * Try to get an extcon device from the USB PHY controller's "port" + * node. Check if it has the "port" node first, to avoid printing the + * error message from underlying code, as it's a valid case: extcon + * device (and "port" node) may be missing in case of "usb-role-switch" + * or OTG mode. + */ + np_phy = of_parse_phandle(dev->of_node, "phys", 0); + if (of_graph_is_present(np_phy)) { + struct device_node *np_conn; + + np_conn = of_graph_get_remote_node(np_phy, -1, -1); + if (np_conn) + edev = extcon_find_edev_by_node(np_conn); + of_node_put(np_conn); + } + of_node_put(np_phy); + + return edev; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1840,6 +1891,12 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } + dwc->edev = dwc3_get_extcon(dwc); + if (IS_ERR(dwc->edev)) { + ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); + goto err3; + } + ret = dwc3_get_dr_mode(dwc); if (ret) goto err3; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 8cad9e7d3368..039bf241769a 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -8,7 +8,6 @@ */ #include <linux/extcon.h> -#include <linux/of_graph.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/property.h> @@ -439,51 +438,6 @@ static int dwc3_drd_notifier(struct notifier_block *nb, return NOTIFY_DONE; } -static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) -{ - struct device *dev = dwc->dev; - struct device_node *np_phy; - struct extcon_dev *edev = NULL; - const char *name; - - if (device_property_read_bool(dev, "extcon")) - return extcon_get_edev_by_phandle(dev, 0); - - /* - * Device tree platforms should get extcon via phandle. - * On ACPI platforms, we get the name from a device property. - * This device property is for kernel internal use only and - * is expected to be set by the glue code. - */ - if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) { - edev = extcon_get_extcon_dev(name); - if (!edev) - return ERR_PTR(-EPROBE_DEFER); - - return edev; - } - - /* - * Try to get an extcon device from the USB PHY controller's "port" - * node. Check if it has the "port" node first, to avoid printing the - * error message from underlying code, as it's a valid case: extcon - * device (and "port" node) may be missing in case of "usb-role-switch" - * or OTG mode. - */ - np_phy = of_parse_phandle(dev->of_node, "phys", 0); - if (of_graph_is_present(np_phy)) { - struct device_node *np_conn; - - np_conn = of_graph_get_remote_node(np_phy, -1, -1); - if (np_conn) - edev = extcon_find_edev_by_node(np_conn); - of_node_put(np_conn); - } - of_node_put(np_phy); - - return edev; -} - #if IS_ENABLED(CONFIG_USB_ROLE_SWITCH) #define ROLE_SWITCH 1 static int dwc3_usb_role_switch_set(struct usb_role_switch *sw, @@ -588,10 +542,6 @@ int dwc3_drd_init(struct dwc3 *dwc) device_property_read_bool(dwc->dev, "usb-role-switch")) return dwc3_setup_role_switch(dwc); - dwc->edev = dwc3_get_extcon(dwc); - if (IS_ERR(dwc->edev)) - return PTR_ERR(dwc->edev); - if (dwc->edev) { dwc->edev_nb.notifier_call = dwc3_drd_notifier; ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST, diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 6c14a79279f9..fea5290de83f 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -251,7 +251,7 @@ static int st_dwc3_probe(struct platform_device *pdev) /* Manage SoftReset */ reset_control_deassert(dwc3_data->rstc_rst); - child = of_get_child_by_name(node, "usb"); + child = of_get_compatible_child(node, "snps,dwc3"); if (!child) { dev_err(&pdev->dev, "failed to find dwc3 core node\n"); ret = -ENODEV; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 079cd333632e..026d4029bda6 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1029,7 +1029,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->endpoint.desc = NULL; } - dwc3_remove_requests(dwc, dep, -ECONNRESET); + dwc3_remove_requests(dwc, dep, -ESHUTDOWN); dep->stream_capable = false; dep->type = 0; @@ -1292,8 +1292,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; } - /* always enable Interrupt on Missed ISOC */ - trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; + if (!no_interrupt && !chain) + trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; break; case USB_ENDPOINT_XFER_BULK: @@ -1698,6 +1698,16 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); memset(¶ms, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + /* + * If the End Transfer command was timed out while the device is + * not in SETUP phase, it's possible that an incoming Setup packet + * may prevent the command's completion. Let's retry when the + * ep0state returns to EP0_SETUP_PHASE. + */ + if (ret == -ETIMEDOUT && dep->dwc->ep0state != EP0_SETUP_PHASE) { + dep->flags |= DWC3_EP_DELAY_STOP; + return 0; + } WARN_ON_ONCE(ret); dep->resource_index = 0; @@ -3238,6 +3248,10 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep, if (event->status & DEPEVT_STATUS_SHORT && !chain) return 1; + if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) && + DWC3_TRB_SIZE_TRBSTS(trb->size) == DWC3_TRBSTS_MISSED_ISOC) + return 1; + if ((trb->ctrl & DWC3_TRB_CTRL_IOC) || (trb->ctrl & DWC3_TRB_CTRL_LST)) return 1; @@ -3719,7 +3733,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * timeout. Delay issuing the End Transfer command until the Setup TRB is * prepared. */ - if (dwc->ep0state != EP0_SETUP_PHASE) { + if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) { dep->flags |= DWC3_EP_DELAY_STOP; return; } diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index a7154fe8206d..f6f13e7f1ba1 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -11,13 +11,8 @@ #include <linux/of.h> #include <linux/platform_device.h> -#include "../host/xhci-plat.h" #include "core.h" -static const struct xhci_plat_priv dwc3_xhci_plat_priv = { - .quirks = XHCI_SKIP_PHY_INIT, -}; - static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc, int irq, char *name) { @@ -97,11 +92,6 @@ int dwc3_host_init(struct dwc3 *dwc) goto err; } - ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv, - sizeof(dwc3_xhci_plat_priv)); - if (ret) - goto err; - memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props)); if (dwc->usb3_lpm_capable) |